Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SETH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Perspective: Interfacial materials at the interface of energy and water

Energy and water are deeply interconnected, and each sector is both central to society and under increasing stress. Innovations in materials will be a powerful tool in efforts to overcome these challenges by providing sustainable solutions to treating water and rendering it fit-for-purpose with minimal expenditure of energy and other resources. Interfaces between components of water systems and the water-based fluids themselves govern the performance of the vast majority of water treatment and conveyance processes. This work examines many of these interfaces, ranging from those in sorbents and sensors to membranes and catalysts, and surveys opportunities for scientists and engineers to reveal new insights into their function and, thereby, to design novel technologies for next-generation solutions to our collective energy-water challenges.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

High performance blue-emitting organic light-emitting diodes from thermally activated delayed fluorescence: A guest/host ratio study

Emitters displaying thermally activated delayed fluorescence (TADF) can drive highly efficient organic light-emitting diodes (OLEDs). Such emitters are usually incorporated into the emissive layer (EML) at a relatively low concentration (<20 wt. %) with respect to a host material, a guest-host method inherited from conventional fluorescent or phosphorescent OLEDs. In this work, detailed studies on OLEDs, in which the concentration of oBFCzTrz (a blue-emitter displaying TADF) in a DPEPO host was varied from 8 to 100 wt. %, reveals that oBFCzTrz displays ambipolar transport and limited fluorescence-quenching due to aggregation. For instance, a neat film of oBFCzTrz maintains a photoluminescence quantum yield of 82%. We determine that OLEDs with an EML having an oBFCzTrz concentration of 50 wt. % in DPEPO yield a maximum external quantum efficiency (EQE) of 25.5% with an EQE roll-off of 10% in the range from 10 to 1000 cd/m 2 and Commission Internationale de l'Eclairage color coordinates of (0.20, 0.44). OLEDs with smaller or larger oBFCzTrz concentrations display smaller maximum EQE values. OLEDs with a neat oBFCzTrz EML display a maximum EQE of 14.0%. Finally, time-resolved electroluminescent decay studies, and analysis using a simple model, reveal significant differences in transport, trapping, and recombination in these devices.

36 MATERIALS SCIENCE↗

Light-driven water oxidation by a dye-sensitized photoanode with a chromophore/catalyst assembly on a mesoporous double-shell electrode

A mesoporous atomic layer deposition (ALD) double-shell electrode, Al 2 O 3 (insulating core)//ALD ZnO|ALD TiO 2 , on a fluorine-doped tin oxide (FTO) conducting substrate was explored for a photoanode assembly, FTO//Al 2 O 3 (insulating core)//ALD ZnO|ALD TiO 2 |–chromophore–catalyst, for light-driven water oxidation. Photocurrent densities at photoanodes based on mesoporous ALD double-shell (ALD ZnO|ALD TiO 2 |) and ALD single-shell (ALD ZnO|, ALD TiO 2 |) electrodes were investigated for O 2 evaluation by a generator–collector dual working electrode configuration. The high photocurrent densities obtained based on the mesoporous ALD ZnO|ALD TiO 2 photoanode for O 2 evolution arise from a significant barrier to back electron transfer (BET) by the optimized tunneling barrier in the structure with the built-in electric field at the ALD ZnO|ALD TiO 2 interface. The charge recombination is thus largely decreased. Finally, in the films, BET following injection has been investigated through kinetic nanosecond transient absorption spectra, and the results of energy band analysis are used to derive insight into the internal electronic structure of the electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding turbulence in compressing plasma as a quasi-EOS

Inspired by experimental Z-pinch results, we investigate plasma turbulence undergoing compression. In addition to Z-pinches, plasma turbulence can be compressed in a range of natural and laboratory settings, including inertial fusion experiments and astrophysical molecular clouds. The plasma viscosity, when modeled as described by Braginskii, depends strongly on both temperature and ionization state, giving it the possibility to have a large range of behavior. Here, we highlight the importance of viscous variation in these settings, as well as various insights that can be gained by considering this variation. Included are a “sudden viscous dissipation” effect that leads to a new concept for inertial fusion or X-ray bursts and a bound on turbulent energy behavior under compression. This bound, which was previously applied in inviscid molecular cloud turbulence, is here shown in an application to turbulence that transitions from inviscid to viscous regimes. In conclusion, the task of understanding turbulence under compression can be cast as the process of seeking a “quasi equation of state” for turbulent energy under compression.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detection of Rashba spin splitting in 2D organic-inorganic perovskite via precessional carrier spin relaxation

The strong spin-orbit interaction in the organic-inorganic perovskites tied to the incorporation of heavy elements (e.g., Pb and I) makes these materials interesting for applications in spintronics. In conjunction with a lack of inversion symmetry associated with distortions of the metal-halide octahedra, surfaces and interfaces, or the application of a bias, the Rashba effect (used in spin field-effect transistors and spin filters) has been predicted to be much larger in these materials than in traditional III-V semiconductors such as GaAs. Evidence of strong Rashba coupling has been observed in both 3D (bulk) and 2D perovskites, with the relative role of bulk and surface Rashba contributions in the former case under active debate. The varying size of the reported spin splittings points to the need for more experimental studies of Rashba effects in the organic-inorganic perovskite family of materials. Here, we apply time-resolved circular dichroism techniques to the study of carrier spin dynamics in a 2D perovskite thin film [(BA)2MAPb2I7; BA = CH3(CH2)3NH3, MA = CH3NH3]. Our findings confirm the presence of a Rashba spin splitting via the dominance of precessional spin relaxation induced by the Rashba effective magnetic field (also known as D’yakonov Perel spin relaxation). The size of the Rashba spin splitting in our system was extracted from simulations of the measured spin dynamics incorporating LO-phonon and electron-electron scattering, yielding a value of 10 meV at an electron energy of 50 meV above the band gap, representing a 20 times larger value than in GaAs quantum wells.

36 MATERIALS SCIENCE↗

Viscous dissipation in two-dimensional compression of turbulence

Nonradial hydrodynamic flow can be generated or amplified during plasma compression by various mechanisms, including the compression itself. In certain circumstances, the plasma may reach a viscous state; for example, in compression experiments seeking fusion, the fuel plasma may reach a viscous state late in the compression due in part to the rising fuel temperature. Here, we consider viscous dissipation of nonradial flow in the case of initially isotropic, three-dimensional (3D), turbulent flow fields compressed at constant velocity in two dimensions. Prior work in the case of 3D compressions has shown the possibility of effective viscous dissipation of nonradial flow under compression. We show that, theoretically, complete viscous dissipation of the nonradial flow should still occur in the 2D case when the plasma heating is adiabatic and the viscosity has the (strong) Braginskii temperature dependence (μ~ T 5/2 ). Futhermore, in the general case, the amount of compression required is very large even for modest initial Reynolds numbers, with the compression reaching an intermediate state dominated by variations only in the noncompressed direction. We show that both the nonlinearity and boundary conditions can play important roles in setting the characteristics and ease of the viscous dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock compression of fused silica: An impedance matching standard

The properties of silica (SiO 2 ) at extreme conditions have important applications for planetary processes and for high pressure research. Here, we report the results of 125 plate impact shock compression experiments on fused silica spanning 200–1100 GPa using the Z machine at Sandia National Laboratories. Additionally, we present a complementary set of density functional theory based molecular dynamics calculations based on an amorphous reference state that extend the Hugoniot to 2500 GPa. We find good agreement between the Z data, extant laser driven shock compression experiment data, and computational results over most of the pressure range. With these results, fused silica can be used as a new impedance matching standard for shock compression experiments.

54 ENVIRONMENTAL SCIENCES↗

The chemical physics of sequential infiltration synthesis—A thermodynamic and kinetic perspective

Sequential infiltration synthesis (SIS) is an emerging materials growth method by which inorganic metal oxides are nucleated and grown within the free volume of polymers in association with chemical functional groups in the polymer. SIS enables the growth of novel polymer-inorganic hybrid materials, porous inorganic materials, and spatially templated nanoscale devices of relevance to a host of technological applications. Although SIS borrows from the precursors and equipment of atomic layer deposition (ALD), the chemistry and physics of SIS differ in important ways. These differences arise from the permeable three-dimensional distribution of functional groups in polymers in SIS, which contrast to the typically impermeable two-dimensional distribution of active sites on solid surfaces in ALD. In SIS, metal-organic vapor-phase precursors dissolve and diffuse into polymers and interact with these functional groups through reversible complex formation and/or irreversible chemical reactions. In this perspective, we describe the thermodynamics and kinetics of SIS and attempt to disentangle the tightly coupled physical and chemical processes that underlie this method. Here, we discuss the various experimental, computational, and theoretical efforts that provide insight into SIS mechanisms and identify approaches that may fill out current gaps in knowledge and expand the utilization of SIS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The shock physics of giant impacts: Key requirements for the equations of state

We discuss major challenges in modeling giant impacts between planetary bodies, focusing on the equations of state (EOS). During the giant impact stage of planet formation, rocky planets are melted and partially vaporized. However, most EOS models fail to reproduce experimental constraints on the thermodynamic properties of the major minerals over the required phase space. Here, we present an updated version of the widely-used ANEOS model that includes a user-defined heat capacity limit in the thermal free energy term. Our revised model for forsterite (Mg 2 SiO 4 ), a common proxy for the mantles of rocky planets, provides a better fit to material data over most of the phase space of giant impacts. We discuss the limitations of this model and the Tillotson equation of state, a commonly used alternative model.

79 ASTRONOMY AND ASTROPHYSICS↗

Strain dependence of Auger recombination in 3 μm GaInAsSb/GaSb type-I active regions

We differentiate the effect of strain induced by lattice-mismatched growth from strain induced by mechanical deformation on cubic nonradiative Auger recombination in narrow-gap GaInAsSb/GaSb quantum well (QW) heterostructures. The typical reduction in the Auger coefficient observed with lattice-mismatched growth appears to be due to the concomitant compositional change rather than the addition of strain, with implications for mid-IR semiconductor laser design. We induced a range of internal compressive strain in five samples from -0.90% to -2.07% by varying the composition during the growth and mechanically induced a similar range of internal strain in analogous quantum well membrane samples. We performed time-resolved photoluminescence and differential reflectivity measurements to extract the carrier recombination dynamics, taken at 300 K with carrier densities from 2.7 × 10 18 cm -3 to 1.4 × 10 19 cm -3 . We observed no change with strain in the cubic Auger coefficient of samples that were strained mechanically, but we did observe a trend with strain in samples that were strained by the QW alloy composition. Measured Auger coefficients ranged from 3.0 × 1 0 - 29 cm 6 s -1 to 3.0 × 1 0 - 28 cm 6 s -1 .

36 MATERIALS SCIENCE↗

A high-pressure flow through test vessel for neutron imaging and neutron diffraction-based strain measurement of geological materials

Neutron scattering and neutron imaging have emerged as powerful methods for experimentally investigating material deformation and fluid flow in the interior of otherwise inaccessible or opaque structures. This paper describes the design and provides example uses of a pressure cell developed for investigating such behaviors within geological materials. The cell can accommodate cylindrical samples with diameters up to 38.1 mm and lengths up to 154 mm. Additionally, ports in the cell and a pressure isolating sleeve around the sample allow the independent application of confining pressure up to 69 MPa and axial pressure up to 34.5 MPa. Furthermore, two material versions of the cell have been manufactured and used to date. An aluminum version is typically used for temperatures below 40 °C, because of its relative transparency to neutrons, while a titanium version, which is comparatively more neutron attenuating, is used for experiments requiring triaxial pressurization under conditions up to 350 °C. The pressure cells were commissioned at the VULCAN engineering diffractometer at the Oak Ridge National Laboratory (ORNL), Spallation Neutron Source, and have since been used at the ORNL high flux isotope reactor CG1-D imaging beamline, National Institute of Standard and Technology (NIST) BT-2, and NIST NG6 imaging beamlines.

47 OTHER INSTRUMENTATION↗

Strength of porous α-SiO 2 in a shock loaded environment: Calibration via Richtmyer–Meshkov instability and validation via Mach lens

The strength of brittle porous media is of concern in numerous applications, for example, earth penetration, crater formation, and blast loading. Thus, it is of importance to possess techniques that allow for constitutive model calibration within the laboratory setting. The goal of the current work is to demonstrate an experimental technique allowing for strength assessment of porous media subjected to shock loading, which can be implemented into pressure-dependent yield surfaces within numerical simulation schemes. As a case study, the deviatoric response of distended α-SiO 2 has been captured in a tamped Richtmyer–Meshkov instability (RMI) environment at a pressure regime of 4–10 GPa. Hydrocode simulations were used to interpret RMI experimental data, and a resulting pressure-dependent yield surface akin to the often employed modified Drucker–Prager model was calibrated. Simulations indicate that the resulting jet length generated by the RMI is sensitive to the porous media strength, thereby providing a feasible experimental platform capable of capturing the pressurized granular deviatoric response. Furthermore, in efforts to validate the RMI-calibrated strength model, a set of Mach-lens experiments was performed and simulated with the calibrated pressure-dependent yield surface. Excellent agreement between the resulting Mach-lens length in experiment and simulation provides additional confidence to the RMI yield-surface calibration scheme.

36 MATERIALS SCIENCE↗

High-pressure high-temperature synthesis and thermal equation of state of high-entropy transition metal boride

High-entropy transition metal boride (Hf 0.2 Ti 0.2 Zr 0.2 Ta 0.2 Mo 0.2 )B 2 sample was synthesized under high-pressure and high-temperature starting from ball-milled oxide precursors (HfO 2 , TiO 2 , ZrO 2 , Ta 2 O 5 , MoO 3 ) mixed with graphite and boron-carbide. Experiments were conducted in a large-volume Paris Edinburgh press combined with an in-situ Energy Dispersive X-ray Diffraction. The hexagonal AlB 2 phase with an ambient pressure volume V 0 = 27.93 ± 0.03 Å 3 was synthesized at a pressure of 0.9 GPa and temperatures above 1373K. High-pressure high-temperature studies on the synthesized high-entropy transition metal boride sample were performed to 7.6 GPa and 1873 K. The thermal equation of state fitted to the experimental data resulted in an ambient pressure bulk-modulus K 0 = 344 ± 39 GPa, dK/dT = –0.108 ± 0.027 GPa/K, and a temperature dependent volumetric thermal expansion coefficient α = α 0 + α 1 T + α 2 T –2 . The thermal stability combined with a high bulk-modulus establishes this high-entropy transition metal boride as an ultrahard high-temperature ceramic material.

36 MATERIALS SCIENCE↗

Dynamic compression of TiO 2 to 221 GPa

The high-pressure dynamic response of titanium dioxide (TiO 2 ) is not only of interest because of its numerous industrial applications but also because of its structural similarities to silica (SiO 2 ). We performed plate impact experiments in a two-stage light gas gun, at peak stresses from 64 to 221 GPa to determine the TiO 2 response along the Hugoniot. The lower stress experiment at 64 GPa shows an elastic behavior followed by an elastic–plastic transition, whereas the high stress experiments above 64 GPa show a single wave structure. Previous shock studies have shown the presence of high-pressure phases (HPP) I (26 GPa) and HPP II (100 GPa); however, our data suggest that the HPP I phase is stable up to 150 GPa. Using a combination of data from our current study and our previous Z-data, we determine that TiO 2 likely melts on the Hugoniot at 157 GPa. Furthermore, our data confirm that TiO 2 is not highly incompressible as shown by a previous study.

36 MATERIALS SCIENCE↗

Hybrid simulation of Alfvén wave parametric decay instability in a laboratory relevant plasma

Large-amplitude Alfvén waves are subject to parametric decays, which can have important consequences in space, astrophysical, and fusion plasmas. Although the Alfvén wave parametric decay instability (PDI) was predicted decades ago, observational evidence is limited, stimulating considerable interest in laboratory demonstration of the instability and associated numerical modeling. Here, we report an important step toward direct hybrid simulation of the Alfvén wave PDI in a laboratory plasma, using antenna-like wave injection of a circularly polarized wave and realistic wave-plasma parameters. Considering collisionless damping, we identify the threshold Alfvén wave amplitudes and frequencies required for triggering the instability. These threshold behaviors are corroborated by simple theoretical analysis, considering the balance between PDI growth and ion Landau damping and PDI development in a bounded plasma. Other effects not included in the present model such as finite transverse wave scale and ion–neutral collisions are briefly discussed. These hybrid simulations promise to be a useful tool for investigating laboratory Alfvén wave dynamics and may provide guidance for future laboratory demonstration of the PDI process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Imaging suprathermal x-rays from a laboratory plasma jet using PIN-diode-based and scintillator-based 1D pinhole/coded aperture cameras

A PIN-diode-based 1D x-ray camera and a scintillator-based 1D x-ray camera, both with a microsecond to submicrosecond time resolution, have been developed to perform time-resolved imaging of transient, low-intensity, suprathermal x-rays associated with magnetohydrodynamic instabilities disrupting a plasma jet. These cameras have a high detection efficiency over a broad x-ray band, a wide field of view, and the capability to produce >50 time-resolved frames with a ≤1 μs time resolution. The x-ray images are formed by a pinhole or by a coded aperture placed outside a vacuum chamber in which the plasma jet is launched. The 1D imaging shows that the location of the x-ray source is either a few centimeters away from an inner disk electrode or near a spatially translatable metal frame that is 30–40 cm away from the electrode. Compared to a pinhole, a coded aperture increases the signal collection efficiency but also introduces unwanted artifacts.

Instruments & Instrumentation↗

Nucleation kinetics model for primary crystallization in Al–Y–Fe metallic glass

The high density of aluminum nanocrystals (>10 21 m -3 ) that develop during the primary crystallization in Al-based metallic glasses indicates a high nucleation rate (~10 18 m -3 s -1 ). Several studies have been advanced to account for the primary crystallization behavior, but none have been developed to completely describe the reaction kinetics. Recently, structural analysis by fluctuation electron microscopy has demonstrated the presence of the Al-like medium range order (MRO) regions as a spatial heterogeneity in as-spun Al 88 Y 7 Fe 5 metallic glass that is representative for the class of Al-based amorphous alloys that develop Al nanocrystals during primary crystallization. From the structural characterization, an MRO seeded nucleation configuration is established, whereby the Al nanocrystals are catalyzed by the MRO core to decrease the nucleation barrier. The MRO seeded nucleation model and the kinetic data from the delay time (τ) measurement provide a full accounting of the evolution of the Al nanocrystal density (N v ) during the primary crystallization under isothermal annealing treatments. Moreover, the calculated values of the steady state nucleation rates (J ss ) predicted by the nucleation model agree with the experimental results. Moreover, the model satisfies constraints on the structural, thermodynamic, and kinetic parameters, such as the critical nucleus size, the interface energy, and the volume-free energy driving force that are essential for a fully self-consistent nucleation kinetics analysis. In conclusion, the nucleation kinetics model can be applied more broadly to materials that are characterized by the presence of spatial heterogeneities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanolamellar phase transition in an additively manufactured eutectic high-entropy alloy under high pressures

Much is unknown about how phase transitions link to micro-/nano-structures in high-entropy systems, especially under extreme pressure and temperature conditions. This work studies the evolution of dual-phase nanolamellar eutectic high-entropy alloy phases of AlCoCrFeNi 2.1 generated by laser powder-bed fusion (L-PBF) for pressures up to 42 GPa. We compare quasi-hydrostatic high pressure synchrotron x-ray diffraction studies on L-PBF printed cylindrical samples up to 5.5 GPa (large-volume Paris–Edinburgh cell) to those carried out on an L-PBF printed foil in a diamond anvil cell where the pressure reached 42 GPa. Our results show that the initially alternating face-centered cubic (FCC) and body-centered cubic (BCC) nanolamellar structure of AlCoCrFeNi 2.1 transformed into single-phase FCC nanolamellae under high pressure with BCC–FCC phase transformation completion at 21 ± 3 GPa. Our results indicate a diffusionless BCC–FCC transformation in this additively manufactured far-from-equilibrium microstructure and demonstrate that the FCC phase is stable up to very high pressures. The measured equation of state for the FCC phase of AlCoCrFeNi 2.1 is presented up to 42 GPa and shows excellent agreement between the data obtained in large-volume press and diamond anvil cell experiments.

36 MATERIALS SCIENCE↗