SEARCH · Engineering Papers

Results for “S WAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

All sources NASA NTRS DOE OSTI

NASA NTRS1961

Lunar Brightness Variations with Phase at 4.3-MM Wave Length

The lunar radio observations and interpretations of Piddington and Minnett (1949) and Gibson (1958) show that the lunar brightness variation with phase at millimeter wave lengths can be used to determine the physical properties of the lunar surface. They found that the millimeter-wave brightness lagged the optical phase, and their interpretation was that the millimeter radiation originates below a surface layer that is a very good thermal insulator. The thickness of this layer could not be determined from observations at one frequency. Observations at different frequencies give different results because of the wave-length dependence of the radio absorption by the surface material. The attenuation in the material increases with decreasing wave length, and therefore it is possible, in principle, to determine surface layer thickness from radio observations at several wave lengths. For this reason, observations of lunar radiation were started at the Naval Research Laboratory at a wave length of 4.3 mm. This is half the wave length used by Gibson (1958) in his earlier studies. The radio telescope used for these observations has been described in detail in a previous publication (Coates 1958). The antenna is a parabolic reflector 10 feet in diameter, and it has a beam width of 6.7 minutes of arc at the wave length of 4.3 mm. This is about one-fifth the diameter of the moon. The receiver was a Dicke-type radiometer.

Coates, Robert J.↗

NASA NTRS2017

EMIC Wave Scale Size in the Inner Magnetosphere: Observations From the Dual Van Allen Probes

Estimating the spatial scales of electromagnetic ion cyclotron (EMIC) waves is critical for quantifying their overall scattering efficiency and effects on thermal plasma, ring current, and radiation belt particles. Using measurements from the dual Van Allen Probes in 2013-2014, we characterize the spatial and temporal extents of regions of EMIC wave activity and how these depend on local time and radial distance within the inner magnetosphere. Observations are categorized into three types: waves observed by only one spacecraft, waves measured by both spacecraft simultaneously, and waves observed by both spacecraft with some time lag. Analysis reveals that dayside (and H+ band) EMIC waves more frequently span larger spatial areas, while nightside (and He+ band) waves are more often localized but can persist many hours. These investigations give insight into the nature of EMIC wave generation and support more accurate quantification of their effects on the ring current and outer radiation belt.

Blum, L. W.↗

NASA NTRS2017

CIMI Simulations with Newly Developed Multiparameter Chorus and Plasmaspheric Hiss Wave Models

Numerical simulation studies of the Earth's radiation belts are important to understand the acceleration and loss of energetic electrons. The Comprehensive Inner Magnetosphere-Ionosphere (CIMI) model considers the effects of the ring current and plasmasphere on the radiation belts to obtain plausible results. The CIMI model incorporates pitch angle, energy, and cross diffusion of electrons, due to chorus and plasmaspheric hiss waves. These parameters are calculated using statistical wave distribution models of chorus and plasmaspheric hiss amplitudes. However, currently, these wave distribution models are based only on a single-parameter, geomagnetic index (AE) and could potentially underestimate the wave amplitudes. Here we incorporate recently developed multiparameter chorus and plasmaspheric hiss wave models based on geomagnetic index and solar wind parameters. We then perform CIMI simulations for two geomagnetic storms and compare the flux enhancement of megavolt electrons with data from the Van Allen Probes and Akebono satellites. We show that the relativistic electron fluxes calculated with multiparameter wave models resemble the observations more accurately than the relativistic electron fluxes calculated with single-parameter wave models. This indicates that wave models based on a combination of geomagnetic index and solar wind parameters are more effective as inputs to radiation belt models.

Aryan, Homayon↗

NASA NTRS2019

The Evolution of a Pitch-Angle "Bite-Out" Scattering Signature Caused by EMIC Wave Activity: A Case Study

Electromagnetic ion cyclotron (EMIC) waves are understood to be one of the dominant drivers of relativistic electron loss from Earth's radiation belts. Theory predicts that the associated gyroresonant wave‐particle interaction results in a distinct energy‐dependent “bite‐out” signature in the normalized flux distribution of electrons as they are scattered into the loss cone. We identify such signatures along with the responsible EMIC waves captured in situ by the Van Allen Probes on 15–16 February 2017. Using the cold plasma approximation, we predict the pitch‐angle cutoffs for the scattering signature for the captured EMIC wave and find it in good agreement with the observed electron bite‐out scattering signature. Employing the close conjunction between the Van Allen Probes and THEMIS during this time, we explore the temporal and spatial evolution of the scattering signature, as well as the surrounding wave activity, and find that the scattering signature formed during continued wave activity over a period less than a day. These results are consistent with wave‐particle interaction theory and support the hypothesis that EMIC waves are an important mechanism for rapid relativistic electron loss from the radiation belts.

Bingley, L.↗

NASA NTRS2019

Evidence for Oscillating Two-Stream Instability and Spatial Collapse of Langmuir Waves in a Solar Type II Radio Burst

We present the high time resolution in situ observations of Langmuir waves, likely excited by an electron beam accelerated by a coronal-mass ejection-driven super-critical quasi-perpendicular interplanetary shock into its upstream solar wind, which happens to be the source region of a solar type II radio burst. We show that (1) these waves occur as coherent localized magnetic-field-aligned, one-dimensional wave packets with durations of a few milliseconds and with peak intensities well in excess of the threshold for strong turbulence processes, (2) they provide what is believed to be the first evidence for: (a) the oscillating two-stream instability (OTSI) L(sub 1) + L(sub 2) S/⟶ U + D, where L(sub 1) and L(sub 2), U and D, and S are the pump Langmuir waves, up- and down-shifted side bands, and ion sound waves, respectively, (b) a three-wave interaction U + D ⟶ T(sub 2f(sub pe)), where T(sub 2f(sub pe)) is the second harmonic electromagnetic wave, (3) they satisfy the threshold condition for formation of collapsing solitons, and (4) they are accompanied by their ponderomotive force induced density cavities with δn(sub p)/n(sub e) > δn(sub b)/n(sub e), where δn(sub p)/n(sub e) is the level of ponderomotive force induced density fluctuations and δn(sub b)/n(sub e) is that of the ambient fluctuations. These findings strongly suggest that the observed wave packets provide evidence for the collapsing solitons formed as a result of OTSI. The implication is that the strong turbulence processes probably play very important roles in excitation of type II radio emissions as well as in stabilization of shock-accelerated electron beams.

Sun radio radiation↗

NASA NTRS2019

GWTC-1: A Gravitational-Wave Transient Catalog of Compact Binary Mergers Observedby LIGO and Virgo During the First and Second Observing Runs

We present the results from three gravitational-wave searches for coalescing compact binaries with component masses above1M during the first and second observing runs of the advanced gravitational-wave detector network. During the first observing run (O1), from September 12, 2015 to January 19, 2016, gravitational waves from three binary black hole mergers were detected. The second observing run (O2), which ran from November 30, 2016 to August 25, 2017, saw the first detection of gravitational waves from a binary neutron star in spiral, in addition to the observation of gravitational waves from a total of seven binary black hole mergers, four of which we report here for the first time: GW170729, GW170809, GW170818, and GW170823. For all significant gravitational-wave events, we provide estimates of the source properties. The detected binary black holes have total masses between18.6þ3.2−0.7M and 84.4þ15.8−11.1M and range in distance between 320þ120−110 and 2840þ1400−1360Mpc. No neutron star–black hole mergers were detected. In addition to highly significant gravitational-wave events, we also provide a list of marginal event candidates with an estimated false-alarm rate less than 1 per 30 days. From these results over the first two observing runs, which include approximately one gravitational-wave detection per 15 days of data searched, we infer merger rates at the 90% confidence intervals of 110−3840Gpc−3y−1 for binary neutron stars and 9.7−101Gpc−3y−1 for binary black holes assuming fixed population distributions and determine a neutron star–black hole merger rate 90% upper limit of 610Gpc−3y−1.

Astrophysics↗

NASA NTRS2024

EMIC Wave Energy Dissipation as a Source of O + Conics and Warm Plasma Cloak in the Earth's Inner Magnetosphere

This study focuses on a specific source of the O + conics and warm plasma cloak in the Earth's inner magnetosphere due to electromagnetic ion cyclotron (EMIC) wave energy dissipation. We analyze the EMIC wave event observed by Van Allen Probe-A in the early afternoon off equatorial magnetosphere on 18 November 2015, where the two dominant EMIC wave bands, He + -band and H + -band, were observed for ∼4 min. All the wave and plasma parameters, the DC magnetic field, and ion distributions needed for our analysis are taken from the Van Allen Probe-A observations during the event. The major results of our analysis are as follows. (a) The H + and He + heating by EMIC waves is negligible. (b) A strong heating of O + by the wave energy dissipation around the third, fifth, and sixth harmonics of the O + gyrofrequency is revealed, where the majority of energy dissipated goes into heating of O + with the energies ≲100 eV and pitch angles ∼20°–90°. The estimated energy deposition rate is ∼0.1–3.4 eV/s per O + , totaling to the deposition of ∼20–800 eV per O + during the event. (c) EMIC waves substantially contribute to the formation of O + conics and warm plasma cloak by heating the upgoing low-energy ionospheric O + because waves heat ions with the energies and pitch angles that are characteristic of conics and warm plasma cloak, and the energy deposition per O + is comparable to those characteristic energies.

Konstantin V. Gamayunov↗

NASA NTRS2024

Oblique Instability of Quasi-Parallel Whistler Waves in the Presence of Cold and Warm Electron Populations

Whistler waves propagating nearly parallel to the ambient magnetic field experience a nonlinear instability due to transverse currents when the background plasma has a population of sufficiently low energy electrons. Intriguingly, this nonlinear process may generate oblique electrostatic waves, including whistlers near the resonance cone with properties resembling oblique chorus waves in the Earth’s magnetosphere. Focusing on the generation of oblique whistlers, earlier analysis of the instability is extended here to the case where low-energy background plasma consists of both a “cold” population with energy of a few eV and a “warm” electron component with energy of the order of 100 eV. This is motivated by spacecraft observations in the Earth’s magnetosphere where oblique chorus waves were shown to interact resonantly with the warm electrons. The main new results are: 1) the instability producing oblique electrostatic waves is sensitive to the shape of the electron distribution at low energies. In the whistler range of frequencies, two distinct peaks in the growth rate are typically present for the model considered: a peak associated with the warm electron population at relatively low wavenumbers and a peak associated with the cold electron population at relatively high wavenumbers; 2) overall, the instability producing oblique whistler waves near the resonance cone persists (with a reduced growth rate) even in the cases where the temperature of the cold population is relatively high, including cases where cold population is absent and only the warm population is included; 3) particle-in-cell simulations show that the instability leads to heating of the background plasma and formation of characteristic plateau and beam features in the parallel electron distribution function in the range of energies resonant with the instability. The plateau/beam features have been previously detected in spacecraft observations of oblique chorus waves. However, they have been attributed to external sources and have been proposed to be the mechanism generating oblique chorus. In the present scenario, the causality link is reversed and the instability generating oblique whistler waves is shown to be a possible mechanism for formation of the plateau and beam features.

Vadim Roytershteyn↗

DOE OSTI2026

Gravitational Waves as a Source of Large-Scale White Noise: New Constraints

A stochastic gravitational wave (GW) background sources a shear in the flow of cosmic fluid which, through non-linear mode coupling, generates large-scale white noise (LSWN) in the kurvature density field. Building on the LSWN framework of our previous work, we derive the amplitude of this GW-induced LSWN and translate the observational non-detection of LSWN into bounds on the production redshift and density of gravity waves. In particular, a minimal constraint on gravity waves with $z=0$ density parameter $Ω_\mathrm{GW0}^*$ in frequency band $f_*$ generated at redshift $z_*$ must satisfy ${z_*}^2\,Ω_\mathrm{GW0}^*<5\times10^7\,(f_*/\mathrm{nHz})^{3/2}$. This, for example, precludes the gravity waves recently detected by pulsar timing arrays \cite{NANOGrav:2023hvm} from being present before $z_*\sim10^8$, long after the quark hadron phase transition. While orders of magnitude stronger than other constraints on gravity waves, this is a minimal LSWN constraint as realistic modeling of early universe gravity wave production, including the granularity of the gravity-wave sources and the LSWN produced by the associated acoustic waves would probably tighten this constraint by orders of magnitude.

Barenboim, Gabriela [Valencia U., IFIC; Valencia U↗

DOE OSTI2024

Performance characterization and modeling of an oscillating surge wave energy converter

Abstract Testing wave energy converters in the ocean could be expensive and complex, which necessitates the use of numerical modeling. However, accurately modeling the response of wave energy converters with high-fidelity simulations can be computationally intensive in the design stage where different configurations must be considered. Reduced-order models based on simplified equations of motion can be very useful in the design, optimization, or control of wave energy converters. Given the complex dynamics of wave energy converters, accurate representation, and evaluation of relative contributions by different forces are required. This effort is concerned with a performance characterization of the hydrodynamic response of an oscillating surge wave energy converter that is based on a reduced-order model. A state-space model is used to represent the radiation damping term. Morison’s representation of unsteady forces is used to account for the nonlinear damping. Wave tank tests are performed to validate simulations. A free response simulation is used to determine the coefficients of the state-space model. Torque-forced simulations are used to identify the coefficients of the nonlinear damping term for different amplitudes and wave frequencies. The impact of varying these coefficients on the response is investigated. An assessment of the capability of the model in predicting the hydrodynamic response under irregular forcing is performed. The results show that the maximum error is 3% when compared with high-fidelity simulations. It is determined that the nonlinear damping is proportional to the torque amplitude and its effects are more pronounced as the amplitude of the flap oscillations increases.

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

IMS observations of infrasound and acoustic-gravity waves produced by the January 2022 volcanic eruption of Hunga, Tonga: A global analysis

The 15 January 2022 Hunga, Tonga, volcano's explosive eruption produced the most powerful blast recorded in the last century, with an estimated equivalent TNT yield of 100–200 megatons. The blast energy was propagated through the atmosphere as various wave types. The most prominent wave was a long-period (>2000 s) surface-guided Lamb wave with energy comparable to that of the 1883 Krakatoa Lamb wave; both were clearly observed by pressure sensors (barometers) worldwide. Internal gravity, acoustic-gravity, and infrasound waves were captured in great detail by the entire infrasound component of the International Monitoring System (IMS). For instance, infrasound waves (<300 s period) were seen to circumnavigate Earth up to eight times. Atmospheric waves captured by the IMS infrasound network and selected barometers near the source provide insight on Earth's impulse response at planetary scales.

58 GEOSCIENCES↗

DOE OSTI2021

Wave resource characterization at regional and nearshore scales for the U.S. Alaska coast based on a 32-year high-resolution hindcast

A wave resource characterization was performed for the southern coast of Alaska based on a 32-year hindcast covering the period from 1979 to 2010. The characterization closely followed International Electrotechnical Commission (IEC) Technical Specifications. An unstructured-grid Simulating WAves Nearshore (SWAN) model, which had an approximate spatial resolution of 300 m within 30 km from the nearest shoreline, was developed. Additionally, extensive model validation and error characterization was performed. The model was found to perform well with an average absolute percent error of 8.6% in significant wave height, averaged over 18 buoys. Statistics for the six IEC wave resource parameters were calculated and aggregated at 20 km from shore to quantify the incident wave power and its variability at a regional scale. The southern coast of the Aleutian Archipelago was found to have the most available wave energy in the region. A nearshore resource assessment was performed by evaluating resource hotspots located 1 km from shore. More than 900 nearshore stations had an Optimum Hotspot Identifier value of 5 (kW/m) at diverse water depths, thereby positioning Alaska as a promising location for wave energy development.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Wave topology in Hall magnetohydrodynamics

Hall magnetohydrodynamics (HMHD) extends ideal MHD by incorporating the Hall effect via the induction equation, making it more accurate for describing plasma behavior at length scales below the ion skin depth. Despite its importance, a comprehensive description of the eigenmodes in HMHD has been lacking. In this work, we derive the complete spectrum and eigenvectors of HMHD waves and identify their underlying topological structure. We prove that the HMHD wave spectrum is homotopic to that of ideal MHD, consisting of three distinct branches: the slow magnetosonic-Hall waves, the shear Alfvén-Hall waves, and the fast magnetosonic-Hall waves, which continuously reduce to their ideal MHD counterparts in the limit of vanishing Hall parameter. Contrary to a recent claim [Mahajan, Sharma, and Lingam, Phys. Plasmas 31, 090701 (2024)], we find that HMHD does not admit any additional wave branches beyond those in ideal MHD. In conclusion, the key qualitative difference lies in the topological nature of the HMHD wave structure: it exhibits nontrivial topology characterized by a Weyl point—an isolated eigenmode degeneracy point—and associated nonzero Chern numbers of the eigenmode bundles over a 2-sphere in 𝐤-space surrounding the Weyl point.

Alfvén waves↗

DOE OSTI2024

Smart Adaptive Structures for an Ocean Wave Energy Converter

Ocean wave energy converters face significant challenges including cost-effectiveness, minimizing maintenance requirements, and withstanding extreme conditions. However, by utilizing smart materials, these converters could overcome these challenges. Such energy harvesters could use dielectric elastomer generators to convert ocean wave energy into electricity through their dynamic straining. Conversely, by applying electricity to these generators, they become actuators - dielectric elastomer actuators - thereby enabling them to alter their stiffness and adapt to the ever-changing ocean energy environments. Such active adaptation could enhance the converter's ability to: reach resonance with ocean waves and protect itself from dangerous waves. This study utilizes numerical analyses through the COMSOL software framework to evaluate the potential energy that could be harvested by a conceptual ocean wave energy converter based upon dielectric elastomer generators/actuators. The converter is composed of an external hull (that is a hollow cylinder), an inertial mass (that is a hollow cylinder and concentric with the hull), and 'spokes' - made of dielectric elastomer generators/actuators - that connect the hull to the inertial mass. Results of the numerical analyses include those outcomes arising from the conceptual converter being simulated via a sinusoidal motion analogous to ocean waves. That motion, therefore, causes relative motion between the converter's hull and inertial mass thereby dynamically stretching the corresponding connecting elastomers. The stretching of the elastomers enables them to 'gain elastic strain energy' and is, therefore, considered to be the theoretical limit of possible electrical energy conversion for the dielectric elastomer generator/actuator spokes. Additionally, the elastomer material properties of the spokes were altered to simulate the actuation of those same elastomers; with overall strain energy being subsequently investigated. Ultimately this is a preliminary study exploring the ability of such smart materials - electricity-generating and self-actuating elastomers - to actively adapt an ocean wave energy converter's structure to address and overcome the aforementioned challenges.

active materials↗

DOE OSTI2025

Framework for Assessing Impact of Wave-Powered Desalination on Resilience of Coastal Communities

Coastal communities face unique challenges in maintaining continuous service from critical infrastructure. This research advances capabilities for evaluating the impact of using wave energy to desalinate water on the resilience of coastal communities. The study focuses on the feasibility of using wave energy conversion to provide drinking water to communities in need and applying resilience metrics to quantify its impact on the community. To assess the feasibility of wave-powered desalination, this research couples the open-source software Wave Energy Converter SIMulator (WEC-Sim) and Water Network Tool for Resilience (WNTR). This research explores variations in both the wave resource (location, seasonality, and duration) and the ability to maintain drinking water service during a disruption scenario by applying the simulation framework to three case studies, which are based on communities in Puerto Rico. The simulation framework provides a contextualized assessment of the ability of wave-powered desalination to improve the resilience of coastal communities, which can serve as a methodology for future studies seeking the integration of wave-powered desalination with water distribution systems.

16 TIDAL AND WAVE POWER↗

DOE OSTI2023

Investigation of Goubau Wave Propagation on Large Pipes for Sensing Applications

We examine the application of guided waves on a single conductor (Goubau waves) for sensing. In particular, the use of such waves to remotely interrogate surface acoustic wave (SAW) sensors mounted on large-radius conductors (pipes) is considered. Experimental results using a small-radius (0.0032 m) conductor at 435 MHz are reported. The applicability of published theory to conductors of large radius is examined. Finite element simulations are then used to study the propagation and launching of Goubau waves on steel conductors up to 0.254 m in radius. Simulations show that waves can be launched and received, although energy loss into radiating waves is a problem with current launcher designs.

47 OTHER INSTRUMENTATION↗

NASA NTRS2016

Prospects for Observing and Localizing Gravitational-Wave Transients with Advanced LIGO and Advanced Virgo

We present a possible observing scenario for the Advanced LIGO and Advanced Virgo gravitational-wave detectors over the next decade, with the intention of providing information to the astronomy community to facilitate planning for multi-messenger astronomy with gravitational waves. We determine the expected sensitivity of the network to transient gravitational-wave signals, and study the capability of the network to determine the sky location of the source. We report our findings for gravitational-wave transients, with particular focus on gravitational-wave signals from the inspiral of binary neutron-star systems, which are considered the most promising for multi-messenger astronomy. The ability to localize the sources of the detected signals depends on the geographical distribution of the detectors and their relative sensitivity, and 90% credible regions can be as large as thousands of square degrees when only two sensitive detectors are operational. Determining the sky position of a significant fraction of detected signals to areas of 5 sq. deg to 20 sq. deg will require at least three detectors of sensitivity within a factor of approximately 2 of each other and with a broad frequency bandwidth. Should the third LIGO detector be relocated to India as expected, a significant fraction of gravitational-wave signals will be localized to a few square degrees by gravitational-wave observations alone.

counterparts↗

NASA NTRS2023

Arguments for the Physical Nature of the Triggered Ion-Acoustic Waves Observed on the Parker Solar Probe

Triggered ion-acoustic waves are a pair of coupled waves observed in the previously unexplored plasma regime near the Sun. They may be capable of producing important effects on the solar wind. Because this wave mode has not been observed or studied previously and it is not fully understood, the issue of whether it has a natural origin or is an instrumental artifact can be raised. This paper discusses this issue by examining 13 features of the data such as whether the triggered ion-acoustic waves are electrostatic, whether they are both narrowband, whether they satisfy the requirement that the electric field is parallel to the k-vector, whether the phase difference between the electric field and the density fluctuations is 90°, whether the two waves have the same phase velocity as they must if they are coupled, whether the phase velocity is that of an ion-acoustic wave, whether they are associated with other parameters such as electron heating, whether the electric field instrument otherwise performed as expected, etc. The conclusion reached from these analyses is that triggered ion-acoustic waves are highly likely to have a natural origin although the possibility that they are artifacts unrelated to processes occurring in the natural plasma cannot be eliminated. This inability to absolutely rule out artifacts as the source of a measured result is a characteristic of all measurements.

Electric fields↗