Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Simulated Biomass Sorghum GHG Reduction Potential is Similar to Maize

Policy support for cellulosic biofuels is contingent on their achieving much greater reductions in life-cycle greenhouse gas emissions than corn starch ethanol. Biomass sorghum has been suggested as a genetically and agronomically tractable feedstock species to augment near-term cellulosic feedstock production. This study used DayCent modeling to investigate biomass sorghum production emissions relative to corn with and without stover utilization at 3,265 across the rainfed United States. Sorghum produced greater average feedstock dry matter (15.6±1.4 vs. 14.8±2.2 Mg ha -1 yr -1 ) and slightly lower estimated ethanol energy yields (10.6±1.0 vs. 11.8±2.9 MJ m -2 yr -1 ) as corn grain with 75% stover collection. The high biomass removals in both the sorghum and corn stover scenarios led to soil organic carbon losses on 90% and 100% of sites, respectively. Average feedstock production emissions intensities were similar between sorghum and corn with 75% stover removal (17.6±2.8 vs. 18.8±3.0 g CO 2 e MJ -1 ), but were notably lower under sorghum for sites in the southwestern study region (13.6±3.0 vs. 22.5±3.1 g CO 2 e MJ -1 ). Futhermore, these results suggest that biomass sorghum produces cellulosic feedstock with similar emissions to corn grain and at current yield levels is unlikely to meet the Renewable Fuel Standard emissions reduction threshold for cellulosic biofuels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Hydroxyls on CeO 2 Support Promoting CuO/CeO 2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. Here, in this study, we report the preparation and application of a novel CuO/CeO 2 catalyst using a hydroxyl-rich Ce(OH) x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO 2 support, the new CuO/CeO 2 catalyst prepared from the OH-rich Ce(OH) x (CuO/CeO 2 –OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO 2 support on the catalytic performance and physicochemical properties of the CuO/CeO 2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuO x dispersion on CeO 2 , increased the CuO x –CeO 2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO 2 –OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH) x is a superior support for the preparation of highly efficient metal catalysts for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of Superparamagnetic Iron Nanoparticles on Electrocatalysts for the Reduction of Oxygen

It is of great research interest to understand the nanostructures contributing to the activity observed in the reduction of oxygen by non-platinum group metal (PGM) electrocatalysts in acidic media. Iron- and nitrogen-containing carbon networks are often the most studied structures, among which single-atom iron-coordinated nitrogen (FeNx) moieties have often been proposed to be the structures leading to the high activity in these non-PGM electrocatalysts. Iron nanoparticles embedded within a carbon support are also formed under certain conditions as a result of the synthetic processes in making non-PGM electrocatalysts. In this study, we present a study to understand the oxygen reduction reaction (ORR) activity of prepared iron- and nitrogen-containing non-PGM electrocatalysts obtained through the pyrolysis of metal–organic framework (MOF) precursors. We studied the structure–property relationship among nanostructures made from the MOF precursor ZIF-8 under different pyrolysis conditions. Density functional theory calculations were used to explain the effect of structural moieties on the ORR activity. Our results suggest that iron-coordinated C–N structures and iron nanoparticles act synergistically to catalyze the ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deciphering Distinct Overpotential-Dependent Pathways for Electrochemical CO 2 Reduction Catalyzed by an Iron–Terpyridine Complex

[Fe(tpyPY2Me)] 2+ ([Fe] 2+ ) is a homogeneous electrocatalyst for converting CO 2 into CO featuring low overpotentials of <100 mV, near-unity selectivity, and high activity with turnover frequencies faster than 100 000 s -1 . To identify the origins of its exceptional performance and inform future catalyst design, we report a combined computational and experimental study that establishes two distinct mechanistic pathways for electrochemical CO 2 reduction catalyzed by [Fe] 2+ as a function of applied overpotential. Electrochemical data shows the formation of two catalytic regimes at low (η TOF/2 of 160 mV) and high (η TOF/2 of 590 mV) overpotential plateaus. We propose that at low overpotentials [Fe] 2+ undergoes a two-electron reduction, two-proton-transfer mechanism (electrochemical-electrochemical-chemical-chemical, EECC), where turnover occurs through the dicationic iron complex, [Fe] 2+ . Computational analysis supports the importance of the singlet ground-state electronic structure for CO 2 binding and that the rate-limiting step is the second protonation in this low-overpotential regime. When more negative potentials are applied, an additional electron-transfer event occurs through either a stepwise or proton-coupled electron-transfer (PCET) pathway, enabling catalytic turnover from the monocationic iron complex ([Fe] + ) via an electrochemical-chemical-electrochemical-chemical (ECEC) mechanism. Comparison of experimental kinetic data obtained from variable controlled potential electrolysis (CPE) experiments with direct product detection with calculated rates obtained from the energetic span model supports the PCET pathway as the most likely mechanism. Moreover, we build upon this mechanistic understanding to propose the design of an improved ligand framework that is predicted to stabilize the key transition states identified in our study and explore their electronic structures using an energy decomposition analysis. Finally, taken together, this work highlights the value of synergistic computational/experimental approaches to decipher mechanisms of new electrocatalysts and direct the rational design of improved platforms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fullerene Promotes CO 2 Reduction to Methanol by a Cobalt(II) Phthalocyanine Electrocatalyst

Heterogenization of molecular electrocatalysts offers an attractive way to improve the catalytic selectivity and efficiency of CO 2 conversion to liquid fuels. Herein, we employ density functional theory to compare the mechanism of CO 2 RR by a cobalt(II) tetra(amino)phthalocyanine (Co(II)Pc(NH 2 ) 4 ) electrocatalyst with and without the presence of fullerene support. Our DFT calculations suggest that the CO 2 reduction mechanism is initiated by a metal-based electron reduction followed by subsequent CO 2 nucleophilic addition, electron transfer, proton transfer, water dissociation, and proton-coupled electron transfer steps that lead to CO and methanol formation. We show that graphitic interactions between the Co(II)Pc(NH 2 ) 4 electrocatalyst and C 60 support selectively improve the CO 2 RR to methanol at mild potentials. The undesirable hydrogen evolution reaction (HER) was also investigated for both electrocatalysts and proceeds via the protonation of the cobalt metal center over the nitrogen atom in the inner ring. The competition between the HER and the CO 2 RR was improved in favor of CO and methanol formation using the Co(II)Pc(NH 2 ) 4 @C 60 electrocatalyst. Overall, our results suggest C 60 as a promising graphitic support for molecular electrocatalysts integration for CO 2 catalysis.

Alcohols↗
DOE OSTI2025

Breaking the Neptunyl Barrier: Direct Access to Neptunium(IV) in Aqueous Solution via Polyoxometalate-Mediated Reduction and Stabilization

Neptunium exhibits truly unique chemistry as its speciation is dominated by the neptunyl(V) ion (NpO 2 + ). Here, in this study, we describe the spontaneous destabilization and reduction of neptunyl(V) via complexation to the Keggin-type polyoxometalate (POM) ligand PW 11 O 39 7– . The POM-mediated reduction of NpO 2 + does not require any reducing agent and occurs within minutes, at room temperature, and in aqueous solution. The resulting [Np(PW 11 O 39 ) 2 ] 10- complex (Np(PW 11 ) 2 ) remains soluble, water-stable, and air-stable for weeks and persists over an extended acidity range. Single-crystal structure, solid-state Raman and UV–visible absorbance characterization of Np(PW 11 ) 2 revealed a mixed alpha/beta isomery of the Keggin ion, forming an unprecedented 50:50 mixture of Np(α-PW 11 ) 2 and Np(α-PW 11 )(β-PW 11 ). Experiments with other tetravalent ions (i.e., Zr 4+ , Hf 4+ , Ce 4+ , and Th 4+ ) indicate that the occurrence of the beta isomer is specific to Np 4+ and independent of the cation’s size. Solution-state characterization of the Np-PW 11 system via UV-visible-NIR absorbance, 31 P NMR, VT NMR, and relaxometry further elucidated the speciation. Moreover, comparative experiments with uranium revealed that the two types of actinyl ions (UO 2 2+ vs NpO 2 + ) undergo drastically different reactions in the presence of PW 11 . UO 2 2+ is not reduced but instead uses PW 11 as a phosphate reservoir and precipitates as uranyl phosphate.

Hastings, Ashley M. [Lawrence Livermore National L↗
DOE OSTI2026

Pressure-Induced Reduction of Dicyanamide by Samarium(II) in a Coordination Polymer

A samarium(II) coordination polymer, [Sm(2.2.2- cryptand)(dca)]I (dca− = dicyanamide), has been prepared from the reaction of SmI2 with tetrabutylammonium dicyanamide and 2.2.2- cryptand. The structure consists of [Sm(2.2.2-cryptand)] 2+ cations bridged by dicyanamide to form corrugated 1D chains. Single crystals of this compound have been studied spectroscopically using UV−vis−NIR and Raman spectroscopy as a function of pressure to reveal a pressureinduced two-electron reduction of dicyanamide by Sm 2+ to cyanide and cyanamide and Sm 3+ between 5 and 8 GPa. High-pressure single-crystal diffraction studies reveal a phase change at 2.6 ± 0.1 GPa, where a polymorph exhibiting a smaller Sm 2+ ···N C bond angle and shorter Sm 2+ ···C distance was observed. These observations provide mechanistic insight into the reduction of dicyanamide into cyanide and cyanamide by pressurized samarium(II).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomistic Insight into Cation Effects on Binding Energies in Cu-Catalyzed Carbon Dioxide Reduction

Electrolyte properties in general and electrolyte ions in particular have been shown to have significant effects on the kinetics of electrochemical CO 2 and CO reduction at metal electrodes, but these effects have not yet been fully understood. Here, we investigate the effects of cations at the aqueous electrolyte–Cu(211) interface on adsorbate binding energies and the electrolyte structure using density functional theory (DFT). Charging the interface via explicit Na + has systematic effects on adsorbate–electrolyte interactions and conformations. We describe specific local adsorbate–ion interactions, including direct alkali ion–adsorbate coordination and hydrogen bonding via ion-coordinated water molecules. The relative importance of these specific interactions and purely electrostatic field–adsorbate interactions is investigated by comparing the DFT-calculated ion effects to those predicted by purely electrostatic models of the interface and the adsorbates. We find that the trend in ion effects among different adsorbates at constant surface charge density is well explained by a purely electrostatic interaction model. The binding energy of OCCHO is found to depend strongly on the surface charge density as well as the spatial distribution of ions at constant surface charge density. These effects are also explained by a purely electrostatic local electrostatic field–adsorbate model. This indicates that alkali ion effects can be mainly attributed to purely electrostatic field interactions and that the local field at ion-stabilized active sites can depend significantly on both the overall charge density and on the spatial distribution of ions at constant charge density. This work provides new insight on alkali ion effects on a variety of adsorbates relevant to the CO 2 and CO reduction reactions by describing specific local ion–adsorbate interactions, systematic changes in adsorbate–electrolyte interactions induced by explicit surface charge, and comparisons of the calculated effects on binding energies to simple electrostatic field–adsorbate models to explain trends among various adsorbates and at varying surface charge densities and supercell configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantitative Cu Counting Methodologies for Cu/SSZ-13 Selective Catalytic Reduction Catalysts by Electron Paramagnetic Resonance Spectroscopy

Here, two Cu/SSZ-13 selective catalytic reduction (SCR) catalysts with distinct Si/Al ratios and isolated Z2Cu and ZCuOH distributions are prepared for in situ electron paramagnetic resonance (EPR) spectroscopic studies. These in situ studies include dehydration, titration of dehydrated samples with NO+O 2 and NH 3 , titration of NH 3 saturated samples with NO+O 2 , and finally steady-state standard NH 3 -SCR reaction. During dehydration, EPR active hydrated ZCuOH loses H 2 O ligands and becomes EPR silent due to a pseudo Jahn-Teller effect; a portion of ZCuOH also undergoes autoreduction to ZCu(I) species, a process that also induces EPR invisibility. During NO+O 2 treatment of dehydrated samples, ZCu(I) species are oxidized to Cu(II)-NO 3 - species, regaining EPR visibility. During NH3 titration, EPR silent dehydrated ZCuOH can also regain EPR visibility by coordinating with NH 3 ligands. During NO+O 2 titration of NH 3 -saturated samples, EPR active Cu contents first decrease due to Cu(II) reduction to Cu(I), and then increase due to Cu(II)-NO 3 - species formation. However, the Cu(II)-NO 3 - formation chemistry is substantially slower for the Si/Al = 36 catalyst. In steady-state SCR studies, the EPR active content decreases with increasing temperature in the kinetically controlled low-temperature regime and becomes largely invariant in mass-transfer limited regime. Importantly, Cu sites in the SCR more active Si/Al = 6 catalyst display substantially higher EPR visibility than the SCR less active Si/Al = 36 catalyst at any reaction temperatures tested. The higher Cu loading for the former catalyst is believed to be key for this difference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Azo(xy) vs Aniline Selectivity in Catalytic Nitroarene Reduction by Intermetallics: Experiments and Simulations

Intermetallic nanoparticles are promising catalysts in hydrogenation and fuel cell technologies. Much is known about the ability of intermetallic nanoparticles to selectively reduce nitro vs alkene, alcohol, or halide functional groups; less is known about their selectivity toward aniline vs azo or azoxy condensation products that result from the reduction of a nitro group alone. Because azo(xy)arenes bear promise as dyes, chemical stabilizers, and building blocks to functional materials but can be difficult to isolate, developing high surface area nanoparticle catalysts that display azo(xy) selectivity is desirable. To address this question, we studied a family of nanocrystalline group 10 metal (Pd, Pt)- and group 14 metal (Ge, Sn, Pb)-containing intermetallics-Pd 2 Ge, Pd 2 Sn, Pd 3 Sn 2 , Pd 3 Pb, and PtSn-in the catalytic reduction of nitroarenes. In contrast to monometallic Au, Pt, and Pd nanoparticles and "random" PdxSn1 – x nanoalloys, which are selective for aniline, nanoparticles of atomically precise intermetallic Pd 2 Ge, Pd 2 Sn, Pd 3 Sn 2 , and PtSn prefer an indirect condensation pathway and have a high selectivity for the azo(xy) products. The only exception is Pd 3 Pb, the most active among the intermetallic nanoparticles studied here, which is instead selective for aniline. Employing a novel application of molecular dynamics-based on machine learned potentials within a DeePMD framework-to heterogeneous catalysis, we are able to identify key reaction species on the different types of catalysts employed, furthering our understanding of the unique selectivity of these materials. By demonstrating how intermetallic nanoparticles can be as active yet more selective than other more traditional catalysts, this work provides new physical insights and opens new opportunities in the use of these materials in other important chemical transformations and applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

La-Based Perovskite Oxide Catalysts for Alkaline Oxygen Reduction: The Importance of Electrochemical Stability

Alkaline fuel cells represent a promising energy conversion technology since they enable the use of precious metal-free electrocatalysts for the oxygen reduction reaction. Among these, La-based perovskite oxides, with great compositional and structural tunability, are especially attractive. However, we believe that the current literature lacks a thorough understanding of their inherent (in)stability issues. Here, in this study, we report on nine La-based perovskite oxide electrocatalysts for the oxygen reduction reaction, including LaMO 3 (M = Mn, Co, Ni) and LaCo x M 1–x O 3 (M = Mn, Ni; x = 0.9, 0.5, 0.1). While some exhibited initial promising activity, they all degraded significantly, even after brief electrochemical testing. Through comprehensive structural characterization of LaCo 0.9 Mn 0.1 O 3 , particularly scanning transmission electron microscopy, we found evidence to support a degradation mechanism in which the B-site cation species irreversibly leach from the perovskite under testing conditions. A sample cycled 10 000 times from +0.4 to +1.2 V vs reversible hydrogen electrode (RHE) showed an amorphous La oxide shell 1–2 nm thick. Bulk analyses showed that B-site leaching also occurs for samples soaked in 1 M KOH or pure EtOH. The mechanistic insights provided here should help inform the future design of La-based perovskite oxide electrocatalysts for alkaline fuel cells and stress the importance of stability metrics validating claims of promising electrocatalytic activity.

Seok, Jeesoo↗
DOE OSTI2022

Probing Electrolyte Influence on CO 2 Reduction in Aprotic Solvents

Selective CO 2 capture and electrochemical conversion are important tools in the fight against climate change. Industrially, CO 2 is captured using a variety of aprotic solvents due to their high CO 2 solubility. However, most research efforts on electrochemical CO 2 conversion use aqueous media and are plagued by competing hydrogen evolution reaction (HER) from water breakdown. Fortunately, aprotic solvents can circumvent HER, making it important to develop strategies that enable integrated CO 2 capture and conversion. However, the influence of ion solvation and solvent selection within nonaqueous electrolytes for efficient and selective CO 2 reduction is unclear. In this work, we show that the bulk solvation behavior within the nonaqueous electrolyte can control the CO2 reduction reaction and product distribution occurring at the catalyst-electrolyte interface. We study different tetrabutylammonium (TBA) salts in two electrolyte systems with glyme ethers (e.g., 1,2 dimethoxyethane or DME) and dimethyl sulfoxide (DMSO) as a low and high dielectric constant medium, respectively. Using spectroscopic tools, we quantify the fraction of ion pairs that forms within the electrolyte. Also, we show how ion pair formation is prevalent in DME and is dependent on the anion type. More importantly, we show that as ion pair formation decreases within the electrolyte, CO 2 current densities increase, and a higher CO Faradaic efficiency is observed at low overpotentials. Meanwhile, in an electrolyte medium where the ion pair fraction does not change with the anion type (such as in DMSO), a smaller influence of solvation is observed on CO 2 current densities and product distribution. By directly coupling bulk solvation to interfacial reactions and product distribution, we showcase the importance and utility of controlling the reaction microenvironment in tuning the electrocatalytic reaction pathways. Insights gained from this work will enable novel electrolyte designs for efficient and selective CO 2 conversion to desired fuels and chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Comparative Study of Electrical Double Layer Effects for CO Reduction Reaction Kinetics

Solvation models describe how the interactions between the solutes and solvents affect the reactivity and selectivity in electrochemical processes. In this study, we developed a framework for evaluating the effects of applied potential and electrical double layer on CO reduction (COR), comparing fully explicit, implicit, and hybrid solvation models at the standard hydrogen electrode (SHE) scale. We analyzed all crucial intermediates leading to the production of C 1 and C 2 products and found good agreement across these models. Some notable differences were observed in the implicit description of *C and *CO adsorption at higher overpotentials and overall trends in the adsorption energies within the hybrid model. Using this unified SHE framework, we built comparable microkinetic models for COR kinetics and rates. Despite small differences in thermodynamics, solvation-model-based microkinetic simulations showed good agreement for onset potentials against the benchmark experiment. Only qualitative difference was observed for C 1+ versus hydrogen evolution at high overpotentials for the implicit model. Finally, we constructed a generalized C 2 selectivity map in descriptor space (U SHE , ΔG electrolyte CO ), which highlights the limitations of a copper-based COR catalyst and guides the search for optimal descriptor parameters to maximize C 2 selectivity. In conclusion, these findings demonstrate the importance of considering electrical double layer effects in reduction reactions and offer a useful framework for comparing solvation models and predicting optimal electrochemical conditions for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancing Nitrogen Activation in Electrochemical Reduction: The Role of Rare Earth Oxide Surface Configurations

The pursuit of sustainable ammonia synthesis has prompted the exploration of ambient electrochemical nitrogen reduction reaction (e-NRR) as an alternative to the energy-intensive Haber-Bosch process. Here, this study conducted a theoretical investigation into the use of rare earth oxide materials, specifically dysprosium oxide (Dy 2 O 3 ), as potential electrocatalysts for NRR. Utilizing spin-polarized density functional theory calculations, we explored the interaction between Dy 2 O 3 surfaces and nitrogen (N 2 ) molecules, examining the capability of Dy 2 O 3 to adsorb and activate N 2 under ambient conditions. The results indicate that Dy 2 O 3 surfaces exhibit diverse configurations and bonding environments, providing a variety of reactive sites that display different behaviors in N 2 adsorption and activation. The distinctive electronic structure and surface chemistry of a particular Dy 2 O 3 surface configuration were found to significantly enhance the activation of N 2 by promoting charge transfer, which facilitates the NRR process. This research provides deep insights into the mechanistic pathways of N 2 reduction over Dy 2 O 3 , highlighting the surface properties as pivotal in catalysis. These theoretical insights serve as a foundation for the development of novel rare earth-based electrocatalytic materials for efficient ambient e-NRR, potentially transforming ammonia production into a greener and more energy-efficient process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Investigation of Electrocatalytic CO 2 Reduction on MXene Materials via First-Principles Simulations

Computational studies of CO 2 reduction to yield various products were carried out on the basal plane and edges of different MXene materials. The impact of vacancies upon Mo 2 TiC 2 T x , W 2 TiC 2 T x , and Ti 3 C 2 T x (T x = O and OH) was also examined for both edge and basal sites. Initial calibrations were carried out to generate surfaces with optimal oxide/hydroxide ratios and proper termination sites upon which various vacancy sites were explored to ensure an accurate model of the surfaces’ resting states. From this work, Mo 2 TiC 2 O was determined to exhibit the lowest theoretical overpotential for methane as determined by volcano plot analyses. At a large enough vacancy concentration, the CO 2 reduction reaction (CO 2 RR) is predicted to outcompete the hydrogen evolution reaction (HER) as the predominant reaction on the surface. In conclusion, when examining the edge of Mo 2 TiC 2 O, stronger CO 2 binding was exhibited to such an extent that the reaction was predicted to terminate after the generation of formate on the edge.

Lund, Colton [Argonne National Laboratory (ANL), A↗
DOE OSTI2025

Resolution of Selectivity Steps of CO Reduction Reaction on Copper by Quantum Monte Carlo

Electrochemical reduction of carbon monoxide to valuable fuels and chemicals on copper surfaces remains a challenging area in catalysis due to a limited understanding of adsorption mechanisms and reaction pathways. Although density functional theory (DFT)-based studies have investigated these processes, their accuracy varies across different functionals. Here, in this study, we present the application of fixed-node diffusion Monte Carlo (FNDMC) to benchmark the adsorption energies of CO*, H*, and key CO reduction reaction (CORR) intermediates, COH* and CHO* on the Cu(111) surface. Our results for CO* and H* adsorption energies closely align with experimentally measured chemisorption reactions, highlighting the limitations of DFT and providing site-specific energy comparisons that are often not available experimentally. Additionally, we explore the effect of explicit solvation, demonstrating how water stabilizes the COH* over CHO*, thus suggesting a critical role of COH* in CORR. Finally, we release our high-accuracy FNDMC benchmarks for testing and developing new DFT functionals for electrocatalysis. Overall, this study underscores the potential of FNDMC for detailed surface chemistry studies and offers new insights into catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reduction of CO 2 and CS 2 with Uranium(III) Metallocene Aryloxides

Herein, the reactivity of two metallocene aryloxide U(III) complexes, [(C 5 Me 5 ) 2 U(O-Ar)], Ar = 4- t BuC 6 H 4 , 1; Ar = 2,6- t Bu 2 -4-CH 3 C 6 H 2 (BHT), 3, with CO 2 and CS 2 has been investigated. The reaction of 1 with CO 2 produces a bridging oxo complex, [{(C 5 Me 5 ) 2 (4- t BuC 6 H 4 -O)U} 2 (μ 2 -O)], 4, while 3 with CO 2 results in reductive disproportionation to form the bridging carbonate species, [{(C 5 Me 5 ) 2 (BHT)U} 2 (μ 2 -κ 2 :η 1 -CO 3 )], 5. The difference in reactivity can be attributed to the steric properties of the ligand because the reaction of 3 with an oxo-delivering agent yields a U(V) terminal oxo complex, [(C 5 Me 5 ) 2 (BHT)U=O], 6. Reduction of CS 2 to form a bridging (CS 2 ) 2- ligand, [{(C 5 Me 5 ) 2 (tBuC 6 H 4 -O)U}2(μ 2 -CS 2 )], 7, is observed with 1, while the reaction of 3 with CS 2 also produces a bridging (CS 2 ) 2- reduced ligand complex, followed by C-H bond activation of a methyl group from one (C5Me 5 ) 1- ring, [(C5Me 5 ) 2 (BHT)U{μ 2 -C(H)S 2 }U(C 5 Me 4 CH 2 )(C 5 Me 5 )(BHT)], 8. All compounds are characterized by NMR and IR spectroscopy, and their solid-state structures are determined by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Anolyte Buffering and CO Coverage Effects in the Electrochemical Reduction of CO at Cu Electrocatalysts

Electrolytic CO reduction was investigated at copper electrocatalysts in zero-gap membrane electrode assemblies as a function of buffering agents and cofeeding with CO 2 or Ar. Results show an acetate Faradaic efficiency (FE) of 90% at 300 mA cm −2 using pure CO feeds and phosphate-buffered anolyte near pH 8. When using CO feeds with more alkaline anolytes, the hydrogen evolution reaction becomes the dominant reduction reaction, independent of the buffer. Product distributions of cofeeding experiments with CO and CO 2 show that increasing CO 2 cofeeding results in increased selectivity toward ethylene (42% FE) in near-neutral KHCO 3 anolytes or ethanol (40% FE) in alkaline KOH anolytes. Evaluation of several commercial anion exchange membranes shows similar selectivity trends, suggesting product selectivity is dominated by the local pH and surface coverage of CO. Based on these results, we propose pH buffering and CO coverage behaviors that facilitate high selectivities to acetate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗