Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECYCLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Space Charge Simulations in the Fermilab Recycler for PIP-II

Proton Improvement Plan-II (PIP-II) is Fermilab's plan for providing powerful, high-intensity proton beams to the laboratory's experiments. Upgrades are foreseen for the recycler which will cope with bunches containing fifty percent more beam. Of particular concern is large space charge tune shifts caused by the intensity increase. Simulations performed using Synergia are detailed focusing on the space charge footprint.

43 PARTICLE ACCELERATORS↗

Real-Time Edge AI for Distributed Systems (READS): Progress on Beam Loss De-Blending for the Fermilab Main Injector and Recycler

The Fermilab Main Injector enclosure houses two accelerators, the Main Injector and Recycler. During normal operation, high intensity proton beams exist simultaneously in both. The two accelerators share the same beam loss monitors (BLM) and monitoring system. Beam losses in the Main Injector enclosure are monitored for tuning the accelerators and machine protection. Losses are currently attributed to a specific machine based on timing. However, this method alone is insufficient and often inaccurate, resulting in more difficult machine tuning and unnecessary machine downtime. Machine experts can often distinguish the correct source of beam loss. This suggests a machine learning (ML) model may be producible to help de-blend losses between machines. Work is underway as part of the Fermilab Real-time Edge AI for Distributed Systems Project (READS) to develop a ML empowered system that collects streamed BLM data and additional machine readings to infer in real-time, which machine generated beam loss.

43 PARTICLE ACCELERATORS↗

Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring

For the Recycler Ring at Fermilab, space charge tune shifts of almost 0.1 will have to be dealt with under the Proton Improvement Plan (PIP-II) framework. This will lead to the excitation of third order resonances. The minimization of Resonance Driving Terms (RDTs) allows to mitigate the harmful effect of these betatron resonances. Past work has shown that previously-installed sextupoles can compensate the RDTs of individual third order resonance lines, thus reducing particle losses in these operational regimes. Nevertheless, trying to compensate multiple resonances of the same order simultaneously with these existing sextupoles is limited due to current constraints in the magnets. The following study showcases the procedure to install additional sextupoles in order to aid the compensation of multiple resonances. This includes the optimization of the new sextupoles' locations in order to cancel out multiple RDTs while minimizing the currents needed. This is followed by a verification of their effectiveness by means of the RDT response matrix.

43 PARTICLE ACCELERATORS↗

Impedance model for the Fermilab Recycler ring

We present an impedance model of the Fermilab Recycler ring using PyHEADTAIL. The model is constructed by incorporating analytical expressions for the wakefields of beamline components that contribute significantly to impedance. The effects of indirect space charge are included as an inductive impedance. Benchmarking against measured coherent Betatron tune shifts, the impedance model is found to capture 73.4% of observed tune shifts. Our findings serve as a stepping stone for the development of a realistic impedance model crucial for studying impedance-driven instabilities at higher intensity.

43 PARTICLE ACCELERATORS↗

Semantic Regression for Disentangling Beam Losses in the Fermilab Main Injector and Recycler

Fermilab’s Main Injector enclosure houses two accelerators: the Main Injector (MI) and the Recycler (RR). In periods of joint operation, when both machines contain high intensity beam, radiative beam losses from MI and RR overlap on the enclosure’s beam loss monitoring (BLM) system, making it difficult to attribute those losses to a single machine. Incorrect diagnoses result in unnecessary downtime that incurs both financial and experimental cost. In this work, we introduce a novel neural approach for automatically disentangling each machine’s contributions to those measured losses. Using a continuous adaptation of the popular UNet architecture in conjunction with a novel data augmentation scheme, our model accurately infers the machine of origin on a per-BLM basis in periods of joint and independent operation. Crucially, by extracting beam loss information at varying receptive fields, the method is capable of learning both local and global machine signatures and producing high quality inferences using only raw BLM loss measurements.

43 PARTICLE ACCELERATORS↗

Waker Experiments at Fermilab Recycler Ring

Attaining high-intensity hadron beams is often limited due to the transverse collective instabilities, whose understanding is thus required to see and possibly extend the intensity limitations. To explore such instabilities, a novel artificial wake system, the waker, has been built and tested at the Fermilab Recycler Ring (RR). In this report, we show recent upgrades of the waker. Also, we present experimental studies of instabilities at various space charge and wake parameters.

43 PARTICLE ACCELERATORS↗

Recycler barrier RF buckets

The Recycler Ring at Fermilab uses a barrier rf systems for all of its rf manipulations. In this paper, I will give an overview of historical perspective on barrier rf system, the longitudinal beam dynamics issues, aspects of rf linearization to produce long flat bunches and methods used for emittance measurements of the beam in the RR barrier rf buckets. Current rf manipulation schemes used for antiproton beam stacking and longitudinal momentum mining of the RR beam for the Tevatron collider operation are explained along with their importance in spectacular success of the Tevatron luminosity performance.

43 PARTICLE ACCELERATORS↗

LWR First Recycle of TRU with Thorium Oxide for Transmutation and Cross Sections

Thorium has been considered as an option to uranium-based fuel, based on considerations of resource utilization (thorium is approximately three times more plentiful than uranium) and as a result of concerns about proliferation and waste management (e.g. reduced production of plutonium, etc.). Since the average composition of natural Thorium is dominated (100%) by the fertile isotope Th-232, Thorium is only useful as a resource for breeding new fissile materials, in this case U-233. Consequently a certain amount of fissile material must be present at the start-up of the reactor in order to guarantee its operation. The thorium fuel can be used in both once-through and recycle options, and in both fast and thermal spectrum systems. The present study has been aimed by the necessity of investigating the option of using reprocessed plutonium/TRU, from a once-through reference LEU scenario (50 GWd/ tIHM), mixed with natural thorium and the need of collect data (mass fractions, cross-sections etc.) for this particular fuel cycle scenario. As previously pointed out, the fissile plutonium is needed to guarantee the operation of the reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rapid Automated Dissolution and Analysis Techniques for Radionuclides in Recycle Process Streams

The analysis of process samples for radionuclide content is an important part of current procedures for material balance and accountancy in the different process streams of a recycling plant. The destructive sample analysis techniques currently available necessitate a significant amount of time. It is therefore desirable to develop new sample analysis procedures that allow for a quick turnaround time and increased sample throughput with a minimum of deviation between samples. In particular, new capabilities for rapid sample dissolution and radiochemical separation are required. Most of the radioanalytical techniques currently employed for sample analysis are based on manual laboratory procedures. Such procedures are time- and labor-intensive, and not well suited for situations in which a rapid sample analysis is required and/or large number of samples need to be analyzed. To address this issue we are currently investigating radiochemical separation methods based on extraction chromatography that have been specifically optimized for the analysis of process stream samples. The influence of potential interferences present in the process samples as well as mass loading, flow rate and resin performance is being studied. In addition, the potential to automate these procedures utilizing a robotic platform is evaluated. Initial studies have been carried out using the commercially available DGA resin. This resin shows an affinity for Am, Pu, U, and Th and is also exhibiting signs of a possible synergistic effects in the presence of iron.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

LWR First Recycle of TRU with Thorium Oxide for Transmutation and Cross Sections

Thorium has been considered as an option to uranium-based fuel, based on considerations of resource utilization (thorium is approximately three times more plentiful than uranium) and as a result of concerns about proliferation and waste management (e.g. reduced production of plutonium, etc.). Since the average composition of natural Thorium is dominated (100%) by the fertile isotope Th-232, Thorium is only useful as a resource for breeding new fissile materials, in this case U-233. Consequently a certain amount of fissile material must be present at the start-up of the reactor in order to guarantee its operation. The thorium fuel can be used in both once-through and recycle options, and in both fast and thermal spectrum systems. The present study has been aimed by the necessity of investigating the option of using reprocessed plutonium/TRU, from a once-through reference LEU scenario (50 GWd/ tIHM), mixed with natural thorium and the need of collect data (mass fractions, cross-sections etc.) for this particular fuel cycle scenario. As previously pointed out, the fissile plutonium is needed to guarantee the operation of the reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Organic Matter Composition, Recycling Susceptibility, and the Effectiveness of the Biological Pump – An Evaluation Using NMR Spectra of Marine Plankton

Carbon (C) sequestration through fertilization of phytoplankton with micronutrients and enhancement of the absorption and retention of atmospheric C by ocean biota heavily depends on the efficiency of the “biological pump”. The long-term effectiveness of this strategy depends on a net transfer of C from the upper ocean-atmosphere system to the deep ocean where the C is removed from contact with the atmosphere for an extended period of time. This C removal can be equated to the amount of C fixation by phytoplankton minus the C cycling and regeneration in the euphotic zone. If the regeneration efficiency is increased, then despite increased C fixation, no net loss (sequestration) of C will result. A reduction in cycling efficiency in the euphotic zone, on the other hand, will increase the effectiveness of the “biological pump” and thus C sequestration. The degree of organic matter biodegradation and recycling depends on the “reactivity” of compounds synthesized by the biota, which in turn, is controlled by the structural characteristic of these compounds. There is considerable evidence that different phytoplankton taxa differ substantially in their biogeochemical characteristics and it is likely that the relative abundance of different compounds synthesized by these distinct taxa, and even within each group at different growth conditions, will differ too. This variability in biosynthesis and thus abundance of a wide range of organic compounds in the water column would lend itself to different susceptibility for biodegradation and regeneration. Knowledge of the distribution of various organic matter structural groups synthesized by distinct taxa, the dependence of the organic matter compound classes on different growth conditions (temperature, light, nutrients) and the selective susceptibility of these compound to regeneration is crucial for estimating the potential for rapid regeneration in the euphotic zone, and thus the effectiveness of the “biological pump”.

58 GEOSCIENCES↗

Fuel Fabrication Capability (FFC) Scrap Recycle Report

The Global Threat Reduction Initiative (GTRI) is currently engaged in the development of an ultra-high density low enriched uranium (LEU) fuel for its high-performance research reactors. The fuel consists of a monolithic uranium-molybdenum alloy containing 10% (weight/weight, or w/w) Mo (U-10Mo) enclosed in Al-6061 cladding with a Zr bonding layer. Significant losses are expected in the manufacturing of the LEU fuel, so a means to recycle uranium from the scrap pieces is needed. Uranium can also be recovered from irradiated U-10Mo fuels. As a result, Argonne National Laboratory (Argonne) is assisting by developing an aqueous processing flowsheet for scrap recovery in the fuel fabrication process and for spent fuel recovery. Experiments are being done to verify predicted dissolution conditions and optimize HNO 3 and HF concentrations for timely dissolution of the fuel without the formation of precipitates, while meeting the requirements needed for further processing by a tributyl phosphate solvent extraction procedure to recover uranium from a nitric acid–based media. Dissolution conditions will be discussed first for the U-10Mo foils, followed by the U-10Mo foils with Al cladding, and finally the U-10Mo foils with Al cladding and a Zr bonding layer. The goal of the dissolution experiments is to test predicted conditions from earlier reports; these conditions were based on literature data and make the necessary adjustments to successfully dissolve the LEU fuels without the formation of precipitates. Final concentrations of all fuel components were determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS), and the error associated with the values is ±10%.

Youker, Amanda J.↗

Recycled water reuse permit renewal application for the materials and fuels complex industrial waste ditch and industrial waste pond

This renewal application for the Industrial Wastewater Reuse Permit (IWRP) WRU-I-0160-01 at Idaho National Laboratory (INL), Materials and Fuels Complex (MFC) Industrial Waste Ditch (IWD) and Industrial Waste Pond (IWP) is being submitted to the State of Idaho, Department of Environmental Quality (DEQ). This application has been prepared in compliance with the requirements in IDAPA 58.01.17, Recycled Water Rules . Information in this application is consistent with the IDAPA 58.01.17 rules, pre-application meeting, and the Guidance for Reclamation and Reuse of Municipal and Industrial Wastewater (September 2007). This application is being submitted using much of the same information contained in the initial permit application, submitted in 2007, and modification, in 2012. There have been no significant changes to the information and operations covered in the existing IWRP. Summary of the monitoring results and operation activity that has occurred since the issuance of the WRP has been included. MFC has operated the IWP and IWD as regulated wastewater land treatment facilities in compliance with the IDAPA 58.01.17 regulations and the IWRP. Industrial wastewater, consisting primarily of continuous discharges of nonhazardous, nonradioactive, routinely discharged noncontact cooling water and steam condensate, periodic discharges of industrial wastewater from the MFC facility process holdup tanks, and precipitation runoff, are discharged to the IWP and IWD system from various MFC facilities. Wastewater goes to the IWP and IWD with a permitted annual flow of up to 17 million gallons/year. All requirements of the IWRP are being met. The Operations and Maintenance Manual for the Industrial Wastewater System will be updated to include any new requirements.

99 GENERAL AND MISCELLANEOUS↗

Recycling Presentation

This presentation discusses some specifics of the Environmental Stewardship Services recycling program at LANL.

54 ENVIRONMENTAL SCIENCES↗

Test Plan to Demonstrate Removal of Iodine and Tritium from Simulated Nuclear Fuel Recycle Plant Off-Gas Streams Using Adsorption Processes (Milestone Report)

The objective of this test plan is to describe research that will determine the effectiveness of silver mordenite and molecular sieve beds to remove iodine and water (tritium) from off-gas streams arising from used nuclear fuel recycling processes, and to demonstrate that the iodine and water can be recovered separately from one another.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Model of E-Cloud Instability in the Fermilab Recycler

Simple model of electron cloud is developed in the paper to explain e-cloud instability of bunched proton beam in the Fermilab Recycler. The cloud is presented as an immobile snake in strong vertical magnetic field. The instability is treated as an amplification of the bunch injection errors from the batch head to its tail. Nonlinearity of the e-cloud field is taken into account. Results of calculations are compared with experimental data demonstrating good correlation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Recycling of spent batteries from electric drive vehicles (BNL-GIPP-372)

This project seeks to develop unique, energy efficient high temperature furnace technology and auxiliary equipment (e.g. material handling, cooling and electrical circuits, etc.). The furnace technology would become a critical element of the technology for recycling and reuse of high value materials from spent lithium-ion batteries for electric vehicles.

25 ENERGY STORAGE↗

Final Technical Report for EE0006091: H2Pump Hydrogen Recycling System Demonstration

The objective of this project is to demonstrate the product readiness and to quantify the benefits and customer value proposition of H2Pump’s Hydrogen Recycling System (HRS-100™) by installing and analyzing the operation of multiple prototype 100-kg per day systems in real world customer locations. The data gathered will be used to measure reliability, demonstrate the value proposition to customers, and validate our business model. H2Pump will install, track and report multiple field demonstration systems in industrial heat treating and semi-conductor applications. The customer demonstrations will be used to develop case studies and showcase the benefits of the technology to drive market adoption.

08 HYDROGEN↗