Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Toward an Understanding of Surface Layer Formation, Growth, and Transformation at the Glass–Fluid Interface

Silicate glass is a metastable and durable solid that has application to a number of energy and environmental challenges (e.g., microelectronics, fiber optics, and nuclear waste storage). If allowed to react with water over time silicate glass develops an altered layer at the solid-fluid interface. In this study, we used borosilicate glass (LAWB45) as model material to develop a robust understanding of altered layer formation (i.e., amorphous hydrated surface layer and crystalline reaction products). Experiments were conducted at high surface area-to-volume ratio (~200,000 m-1) and 90 °C in the pressurized unsaturated flow (PUF) apparatus for 1.5-years to facilitate the formation of thick altered layers and allow for the effluent solution chemistry to be monitored continuously. A variety of microscopy techniques were used to characterized reacted grains and suggest the average altered layer thickness is 13.2 ± 8.3 μm with the hydrated and clay layer representing 74.8% and 25.2% of the total altered layer, respectively. This estimate is within the experimental error of the value estimated from the B release rate data (~10 ±1 μm/yr) over the 1.5-year duration. PeakForce® quantitative nanomechanical mapping results suggest the hydrated layer has a modulus that ranges between ~20 to 40 GPa, which is in the range of porous silica that contains from ~20 to ~50% porosity, yet significantly lower than dense silica (~70 to 80 GPa). Scanning transmission electron microscopy (STEM) images confirm the presence of pores and an analysis of a higher resolution image of a region provides a qualitative estimate of ≥ 22% porosity in this layer with variations in the hydrated layer in void volume with increasing distance from the unaltered glass. Chemical composition analyses, based on a combination of time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and scanning electron microscopy with X-ray energy dispersive spectroscopy (EDS) and STEM-EDS, clearly show that the altered layer is mainly composed of Al, H, Si, and O with the clay layer being enriched in Li, Zn, Fe, and Mg. The amorphous hydrated layer is enriched in Ca, H, and Zr with a minor amount of K. Furthermore, ToF-SIMS results also suggest the B profile is anti-correlated with the H profile in the hydrated layer. Our selected-area electron diffraction results suggest the structure of the hydrated layer closely resembles opal-AG (amorphous gel-like) with an average crystallite size of ~0.7 nm which is smaller than the critical nucleus for silica nanoparticles (i.e., 1.4 to 3 nm). These results suggest the hydrated layer is more consistent with a polymeric gel rather than a colloidal gel and is comprised of molecular units (<1 nm in size) that result from the difficult to hydrolyze bonds, such as Si—O—Zr units, during the glass corrosion process. The size of individual particles or molecular units is a function of formation conditions (e.g., pH, ionic strength, nano-confinement, solute composition) in the hydrated layer.

36 MATERIALS SCIENCE↗

Reactivity of Redox Cycled Fe-bearing Subsurface Sediments Towards Hexavalent Chromium Reduction

Structural Fe(II) in clay minerals and natural sediments is known to reduce Cr(VI) to Cr(III), but the effect of redox-cycled Febearing natural sediments on Cr(VI) reduction kinetics is poorly understood. The objective of this study was to understand the kinetics and mechanisms of Cr(VI) reduction by Fe(II) in redox cycled natural sediment. Fe-bearing sediment was collected from the Ringold formation in the 300 area of Hanford, Washington, United States. Fe redox cycling of the sediment was accomplished via four cycles of bioreduction of structural Fe(III) in Hanford sediment and air oxidation of the resulting Fe(II). Bio-produced Fe(II) in Hanford sediment from each redox cycle was utilized to reduce Cr(VI) at three temperatures (10, 20 and 30° C). The initial rate of Cr(VI) reduction generally increased with each redox cycle, which was more pronounced at high temperatures. The amount of Fe(II) oxidized to the amount of Cr(VI) reduced was close to the expected stoichiometric ratio of 3. Aqueous concentrations of Si, Al, and Fe revealed some dissolution of the sediment after reaction with Cr(VI). Xray diffraction (XRD) and scanning electron microscopy (SEM) detected secondary mineral formation. Mössbauer data showed that the oxidation of Fe(II) was coupled with the reduction of Cr(VI) but no Feoxides/ oxyhydroxides formed. Transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), XANES, and EXAFS were performed for representative reduced Cr solids that formed from reduction of Cr(VI) by sediment-associated Fe(II) at 30oC. TEM revealed that the d-spacing of Cr-reacted montmorillonite at 30° C, a dominant Fe-bearing mineral in Hanford sediment, expanded from 10 Å to 13 Å. This layer expansion was likely due to intercalation of reduced Cr(III) into the interlayer space of the montmorillonite structure. EELS exhibited an L2 absorption peak at 586.0 eV and an L3 absorption peak at 577.0 eV, suggestive of Cr(III) in a hydroxide mineral phase. Similarly, XANES and EXAFS analyses confirmed Cr(VI) reduction to Cr(OH)3 at 30° C and indicated an edge-sharing coordination of the Cr(III) octahedra to 2-3 other Cr or metal ions. This study has important implications for understanding the reactivity of clay-rich sediment towards Cr(VI) reduction at contaminated sites and the stability of the reduced Cr(III).

Bishop, Michael E.↗

Chemical reactions, porosity, and microfracturing in shale during weathering: The effect of erosion rate

The rate of chemical weathering has been observed to increase with the rate of physical erosion in published comparisons of many catchments, but the mechanisms that couple these processes are not well understood. We investigated this question in our research by examining the chemical weathering and porosity profiles from catchments developed on marine shale located in Pennsylvania, USA (Susquehanna Shale Hills Critical Zone Observatory, SSHCZO); California, USA (Eel River Critical Zone Observatory, ERCZO); and Taiwan (Fushan Experimental Forest). The protolith compositions, protolith porosities, and the depths of regolith at these sites are roughly similar while the catchments are characterized by large differences in erosion rate (1–3 mm yr ₋1 in Fushan &laquo 0.2–0.4 mm yr ₋1 in ERCZO &laquo 0.01–0.025 mm yr ₋1 in SSHCZO). The natural experiment did not totally isolate erosion as a variable: mean annual precipitation varied along the erosion gradient (4.2 m yr ₋1 in Fushan > 1.9 m yr ₋1 in ERCZO > 1.1 m yr ₋1 in SSHCZO), so the fastest eroding site experiences nearly twice the mean annual temperature of the other two. Even though erosion rates varied by about 100×, the depth of pyrite and carbonate depletion (defined here as regolith thickness) is roughly the same, consistent with chemical weathering of those minerals keeping up with erosion at the three sites. These minerals were always observed to be the deepest to react, and they reacted until 100% depletion. In two of three of the catchments where borehole observations were available for ridges, these minerals weathered across narrow reaction fronts. On the other hand, for the rock-forming clay mineral chlorite, the depth interval of weathering was wide and the extent of depletion observed at the land surface decreased with increasing erosion/precipitation. Thus, chemical weathering of the clay did not keep pace with erosion rate. But perhaps the biggest difference among the shales is that in the fast-eroding sites, microfractures account for 30–60% of the total porosity while in the slow-eroding shale, dissolution could be directly related to secondary porosity. We argue that the microfractures increase the influx of oxygen at depth and decrease the size of diffusion-limited internal domains of matrix, accelerating weathering of pyrite and carbonate under high erosion-rate conditions. Thus, microfracturing is a process that can couple physical erosion and chemical weathering in shales.

58 GEOSCIENCES↗

Influence of microstructure on replacement and porosity generation during experimental dolomitization of limestones

Replacement reactions commonly alter the multiscale pore structures of rocks during fluid-rock interactions. Analysis of these processes in various model fluid-rock systems during controlled laboratory experiments provides insights into the origins of microstructures found in natural materials. This study focused on understanding the effects of initial starting material permeability and resultant differences in transport pathways on porosity and mineralogical changes during limestone dolomitization.A series of replacement experiments (32–317 days in duration) have been conducted in which 1.59 cm (5/8 in.) diameter cores of two different limestones were reacted with saturated MgCl2 solutions at 200 °C. The Texas Cream (Austin Chalk) is a high-porosity, high-permeability limestone, whereas both the porosity and permeability of the Carthage Marble (Burlington Limestone) are relatively low. Altered limestones were imaged using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Time-of-Flight Secondary Ion Mass Spectrometry (ToF–SIMS) and electron microprobe analysis (EMPA). A representative grain boundary of the low-porosity limestone was targeted for a focused ion beam (FIB) lift-out and characterized using transmission electron microscopy (TEM). These results were coupled with analyses of radial changes in the porosity distribution of the core derived from X-ray and neutron small- and ultra-small angle scattering ((U)SANS/(U)SAXS).The high-porosity/permeability limestone showed a four times faster bulk replacement rate than the lower-porosity/permeability material, and a different mechanism of porosity development. For the low-porosity limestone, a two-stage replacement occurred, with the reacted region of the core consisting of an inner rim in which the limestone was replaced by two calcite-dolomite solid solutions, and an outer rim in which the dolomite was replaced by magnesite. Elongated pores formed along grain boundaries at the initial limestone/dolomite reaction interface, and additional nanometer-scale porosity was formed at the secondary magnesite replacement rim. Grain boundaries were identified as preferential pathways for transport leading to dolomitization and a grain boundary diffusion rate was calculated based on microstructural characterization. In contrast, replacement in the high-porosity limestone was accompanied by porosity generation through replacement of individual grains by dolomite throughout the sample and, in longer runs, magnesite in outer parts of the core. These observations emphasize that both the mechanisms of the replacement reaction and the microstructure and chemistry of the replaced product are contingent on the initial structure of the starting material.

36 MATERIALS SCIENCE↗

On the dissolution of a borosilicate glass with the use of isotopic tracing – Insights into the mechanism for the long-term dissolution rate

An understanding of the mechanisms responsible for controlling the long-term corrosion rate of nuclear waste glass is paramount if reliable glass dissolution models are to be used to calculate the controlled release of radionuclides from nuclear waste glass under geologic disposal conditions. Additionally, understanding silicate glass dissolution is also important for natural glasses to understand the role from the dissolution of these glasses has on the composition of natural aquatic systems. Two general mechanisms appear to be responsible for the elemental release from glass to the surrounding biosphere - ion exchange (release principally of alkalis) and matrix dissolution (release of the structural components of the glass). Key unknowns related to these mechanisms are the impact of surface layers on the altered glass and how these layers participate in corrosion. To better understand the impact of these layers on glass corrosion, we made two glasses of the same elemental composition, but with selected elements enriched in specific isotopes, e.g. more 10 B than 11 B. We reacted these glasses for 1 y then the solutions from each were exchanged and the chemistry of the solutions and the solids were followed for another 2 y and in some cases 3 y. This allowed us to follow changes in the glasses with respect to these elements and how these elements were transported through the alteration layers with time and, for at least one element, into the glass. Results from these experiments demonstrate that the release behavior of different elements is strongly dependent on their structural role in the glass (e.g. network formers and modifiers), but, more importantly, the role of water transport and subsequent ion exchange has in the long-term dissolution of the glass studied here. In this article, we highlight the behavior of four elements: lithium, sodium, silicon, and boron. Lithium and sodium, network modifying elements, have similar chemistries. The behavior of Li could be tracked in more detail by following both 6 Li and 7 Li; Li penetrates through the gel layer in both directions without hinderance and into and released from the glass deeper than sodium. Silicon, a network forming element, reacts with the silica-rich alteration layer. Boron, a network forming element, does not accumulate in the gel or the pristine glass and has a very sharp elemental profile between the pristine glass and alteration layer. Boron, lithium, and sodium elemental profiles suggest that there is little if any transport control within the alteration layer. The correlation between the Li and Na profiles and that of a water species suggest that the limiting release is a steady state between the diffusion of a water species and matrix dissolution that results in a low release rate for alkali and this provides a steady driving force for the long-term dissolution of glass.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Preparation and reactivity of macrocyclic rhodium(III) alkyl complexes

We found that the macrocyclic rhodium(II) complexes LRh(H 2 O) 2+ (L = L 1 = cyclam and L 2 = meso-Me-6-cyclam) react with alkyl hydroperoxides RC(CH 3 ) 2 OOH to generate the corresponding rhodium(III) alkyls L(H 2 O)RhR 2+ (R = CH 3 , C 2 H 5 , PhCH 2 ). Methyl and benzyl complexes can also be prepared by bimolecular group transfer from alkyl cobaloximes (dmgH) 2 (H 2 O) CoR and (dmgBF 2 ) 2 (H 2 O) CoR (R = CH 3 , PhCH 2 ) to LRh(H 2 O) 2+ . Moreover, the new complexes were characterized by solution NMR and by crystal structure analysis. They exhibit great stability in aqueous solution at room temperature, but undergo efficient Rh-C bond cleavage upon photolysis.

36 MATERIALS SCIENCE↗

The mechanisms, dynamics, and implications of self-sealing and CO 2 resistance in wellbore cements

Here, this study analyzes the dynamics and mechanisms of the interactions of carbonated brine with hydrated-Portland-cement; in particular, the study focuses on self-sealing, a process whereby hydrated-Portland cement reacts with carbonated brine to for silica and calcium carbonate in sufficient quantities to seal the flow pathway. The analysis is based on a comprehensive set of reactive-transport simulations that explore the complex coupled dynamics between the fluid flow and mineral reactions that underlie self-sealing, and it relies heavily on the synthesis of the extensive body of work on wellbore integrity that has been conducted over the past decade. The analysis explores a large chemical and mineralogical diversity and a wide range in physical conditions and flow regimes, attempting to assess the robustness of the analysis. Self-sealing conditions arise over a wide range in cement properties and reservoir conditions. Although some properties and conditions promote a stronger self-sealing response, self-sealing occurs for a wide range of Ca:Si ratios in cement and for various reservoir fluid compositions. Self-sealing conditions move along a wellbore proportional to the flux of the leaking carbonated brine, and the reaction zone spreads out proportional to the fluid velocity, where volumetric flux and velocity are related by porosity (flux = velocity * porosity). However, self-sealing conditions can be maintained in a specific section of a wellbore by controlling the pressure drive and/or effective wellbore permeability, which in turn can limit the flux and velocity of any leaking fluid. Finally, the phases produced by hydrating Portland cement represent a carbonic cement that will react with a carbonated brine to produce end products (calcium carbonate and silica) that can maintain integrity in the presence of carbonic acid. Lastly, the attributes that make hydrated Portland cement phases a carbonic cement are required for self-sealing.

58 GEOSCIENCES↗

The influence of LiH and TiH 2 on hydrogen storage in MgB 2 II. XPS study of surface and near-surface phenomena

We report that Mg(BH 4 ) 2 is a promising solid-state hydrogen storage material, releasing 14.9 wt% hydrogen upon conversion to MgB 2 . The rehydrogenation of MgB 2 is particularly challenging, requiring prolonged exposure to high pressures of hydrogen at high temperature. Here we report an XPS study probing the influence of LiH and TiH 2 on the hydrogen storage properties of MgB 2 in the surface and near-surface regions, as a complementary investigation to a preceding study of the bulk properties. Surface and near-surface properties are important considerations for nanoscale and bulk hydrogen storage materials. If there are reactions occurring at the surface that modify the chemical composition in the near-surface region, species diffusion can alter the chemical composition even deep into the bulk of the material. For LiH/MgB 2 , metastable LiH–B and LiH–Mg species are produced that are more reactive than Bulk MgB 2 . With prolonged glovebox storage, the LiH/MgB 2 material shows increased reactivity towards O and C and enriched levels of Li and B in the near-surface region. In addition, Li induces the growth of Li 2 CO 3 in the surface and near surface regions. Exposing LiH/MgB 2 to hydrogen at 700 bar and 280 °C for 24 h produces borohydride at a temperature 100 °C below the threshold for bulk MgB 2 hydrogenation. In a specifically surface process with macroscopic implications, the hydrogenation conditions also cause Li 2 CO 3 to react with boron hydroxide in the sample to form a Li-deficient glassy lithium borate melt at the interfaces of the particles, bonding them together. Subsequent heating to 380 °C dehydrogenates the borohydride and eliminates the Li-deficient glassy lithium borate. The LiH/MgB 2 material is not reversible because desorption does not lead back to LiH/MgB 2 , but rather to elemental B and Mg metal in the near-surface region. In contrast to LiH, TiH 2 does not react with MgB 2 , despite the favorable thermodynamics for destabilization via TiB 2 formation. Furthermore, high pressure hydrogenation yields only unreacted TiH 2 and MgB 2 in the surface and near-surface regions. Thus, added TiH 2 provides no benefit to MgB 2 hydrogenation, in agreement with the findings of the preceding bulk study.

08 HYDROGEN↗

Zinc treatment to enhance nickel electrode performance for liquid alkaline water electrolyzers

Raney Ni treatment is introduced to the surface of Ni mesh anode electrodes, enhancing liquid alkaline water electrolyzer performance. The surface of the Ni mesh is alloyed with Zn, deposited by either an aqueous infiltration of Zn salt or direct reaction with Zn foil. The extent of alloying is controlled by a heat treatment step. For both processes, fine porosity and enhanced surface area are obtained after leaching the Zn out of the surface alloy layer. The observed electrode surface structure and performance is quite sensitive to the thermal treatment temperature. The enhanced surface area improves full cell performance by 90 mV for infiltrated Zn treated at 600 °C and by 185 mV for Zn foil reacted at 425 °C (at 2 A cm −2 and 80 °C). In conclusion, the Zn treatment methods produce stable operating performance, exhibiting no decay after 150 h for the infiltrated Zn treated at 600 °C, and a decay rate of 4.6 μV h −1 over 100 h for the Zn foil reacted at 425 °C (at 1 A cm −2 and 80 °C).

LAWE↗

Electrospray production and collisional dissociation of lanthanide/methylsulfonyl anion complexes: Sulfur dioxide anion as a ligand

For this study, gas-phase lanthanide-SO 2 complexes, Ln(CH 3 SO 2 ) 3 (SO 2 ) - , were produced by collision induced dissociation (CID) of Ln(CH 3 SO 2 ) 4 - precursors prepared by electrospray ionization. For all lanthanides except Eu, CID of Ln(CH 3 SO 2 ) 4 - resulted in CH 3 loss to form Ln(CH 3 SO 2 ) 3 (SO 2 ) - , which spontaneously react with O 2 to form Ln(CH 3 SO 2 ) 3 (O 2 ) - . CID of Eu(CH 3 SO 2 ) 4 - produced only Eu(CH 3 SO 2 ) 3 - , with reduction from Eu(III) to Eu(II). For Ln = Yb and Sm, the Ln(CH 3 SO 2 ) 4 - underwent neutral ligand loss to form Ln(CH 3 SO 2 ) 3 - , which reacted with O 2 to yield Ln(CH 3 SO 2 ) 3 (O 2 ) - , recovering the Ln(III) oxidation state. The CID results show parallels to condensed-phase Ln 3+ /Ln 2+ redox chemistry. Density functional theory (DFT) calculations on Ln(CH 3 SO 2 ) 3 (SO 2 ) - for Ln = La, Yb and Lu reveal that SO 2 acts as a bidentate oxygen bound ligand for doublet ground-state La(CH 3 SO 2 ) 3 (SO 2 ) - and Lu(CH 3 SO 2 ) 3 (SO 2 ) - , while the ground state for Yb(CH 3 SO 2 ) 3 (SO 2 ) - is an open-shell singlet with a monodentate SO 2 ligand. Loss of CH 3 is computed to be much more favorable than neutral ligand loss for La(CH 3 SO 2 ) 4 - and Lu(CH 3 SO 2 ) 4 - , whereas both channels are comparable in energy for Yb(CH 3 SO 2 ) 4 - , in accord with the experiments. DFT results for fragmentation of Cu(CH 3 SO 2 ) 2 - reveal that formation of the organometallic complex, Cu(CH 3 SO 2 )(CH 3 ) - , is energetically most favorable, in agreement with contrasting fragmentation pathways of copper and lanthanide complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal Normal Tissue Sparing in Craniospinal Axis Irradiation Using IMRT With Daily Intrafractionally Modulated Junction(s)

Purpose: To develop a treatment technique for craniospinal irradiation using intensity-modulated radiotherapy (IMRT) with improved dose homogeneity at the field junction(s), increased target volume conformity, and minimized dose to the organs at risk (OARs). Methods and Materials: Five patients with high-risk medulloblastoma underwent CT simulation in supine position. For each patient, an IMRT plan with daily intrafractionally modulated junction(s) was generated, as well as a treatment plan based on conventional three-dimensional planning (3DCRT). A dose of 39.6 Gy in 22 daily fractions of 1.8 Gy was prescribed. Dose-volume parameters for target volumes and OARs were compared for the two techniques. Results: The maximum dose with IMRT was <107% in all patients. V{sub <95} and V{sub >107} were <1 cm{sup 3} for IMRT compared with 3-9 cm{sup 3} for the craniospinal and 26-43 cm{sup 3} for the spinal-spinal junction with 3DCRT. These observations corresponded with a lower homogeneity index and a higher conformity index for the spinal planning target volume with IMRT. IMRT provided considerable sparing of acute and late reacting tissues. V{sub 75} for the esophagus, gastroesophageal junction, and intestine was 81%, 81%, and 22% with 3DCRT versus 5%, 0%, and 1% with IMRT, respectively. V{sub 75} for the heart and thyroid was 42% and 32% vs. 0% with IMRT. Conclusion: IMRT with daily intrafractionally modulated junction results in a superior target coverage and junction homogeneity compared with 3DCRT. A significant dose reduction can be obtained for acute as well as late-reacting tissues.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Unveiling the nucleation and growth of Zr oxide precipitates in internally oxidized Nb3Sn superconductors

We report on atomic-scale analyses of nucleation and growth of Zr oxide precipitates and the microstructural evolution of internally oxidized Nb3Sn wires for high-field superconducting magnet applications, utilizing atom probe tomography (APT), transmission electron microscopy (TEM), and first-principles calculations. APT analyses reveal that oxygen and zirconium are already segregated at grain boundaries (GBs) in the unreacted Nb-1Zr-4Ta (at%) alloy prior to forming Nb3Sn through reacting the Nb alloy with Sn and SnO2. After forming Nb3Sn, Zr oxide precipitates nucleate both at the Nb3Sn/Nb heterophase interfaces and in the Nb3Sn grains, driven by the small solubilities of Zr and O in Nb3Sn compared to their value in Nb. A high number density (Nv) of Zr oxide nanoprecipitates is observed in the Nb3Sn layers, ∼10 23 m −3 , with a mean diameter <10 nm for a heat treatment at 625 °C. Quantitative APT and TEM analyses of the Zr oxide precipitates in the reacted Nb3Sn layers elucidate details of the nucleation, growth, and coarsening processes of the Zr oxide precipitates in Nb3Sn. First-principles calculations and classical nucleation theory are employed to study the nucleation of Zr oxide precipitates in Nb3Sn and to estimate the maximum energy barrier and critical radius for nucleation. Our research unveils the kinetic pathways for nucleation and growth of Zr oxide precipitates and the microstructural evolution of Nb3Sn layers, which helps to understand and improve the superconducting properties of internally oxidized Nb3Sn wires for use in high-field superconducting magnets. •We investigated the nucleation and growth of Zr oxide nanoprecipitates in Nb3Sn superconductors for magnet applications.•APT and TEM analyses reveals the nucleation and growth process of Zr oxide precipitates in Nb3Sn layers.•Classical nucleation theory with DFT is employed to describe the nucleation process of Zr oxide precipitates in Nb3Sn.•We find that the interfacial reactions at Nb/Nb3Sn interface play a critical role in the nucleation of Zr oxide precipitates.•Current study provides a pathway to improve the properties of internally oxidized Nb3Sn superconducting wires.

43 PARTICLE ACCELERATORS↗

Modifying the resolving cysteine affects the structure and hydrogen peroxide reactivity of peroxiredoxin 2

Peroxiredoxin 2 (Prdx2) is a thiol peroxidase with an active site Cys (C52) that reacts rapidly with H 2 O 2 and other peroxides. The sulfenic acid product condenses with the resolving Cys (C172) to form a disulfide which is recycled by thioredoxin or GSH via mixed disulfide intermediates or undergoes hyperoxidation to the sulfinic acid. C172 lies near the C terminus, outside the active site. It is not established whether structural changes in this region, such as mixed disulfide formation, affect H 2 O 2 reactivity. To investigate, we designed mutants to cause minimal (C172S) or substantial (C172D and C172W) structural disruption. Stopped flow kinetics and mass spectrometry showed that mutation to Ser had minimal effect on rates of oxidation and hyperoxidation, whereas Asp and Trp decreased both by 100-fold. To relate to structural changes, we solved the crystal structures of reduced WT and C172S Prdx2. The WT structure is highly similar to that of the published hyperoxidized form. C172S is closely related but more flexible and as demonstrated by size exclusion chromatography and analytical ultracentrifugation, a weaker decamer. Size exclusion chromatography and analytical ultracentrifugation showed that the C172D and C172W mutants are also weaker decamers than WT, and small-angle X-ray scattering analysis indicated greater flexibility with partially unstructured regions consistent with C-terminal unfolding. We propose that these structural changes around C172 negatively impact the active site geometry to decrease reactivity with H 2 O 2 . This is relevant for Prdx turnover as intermediate mixed disulfides with C172 would also be disruptive and could potentially react with peroxides before resolution is complete.

59 BASIC BIOLOGICAL SCIENCES↗

Selectivity of Chemisorbed Oxygen in C–H Bond Activation and CO Oxidation and Kinetic Consequences for CH₄–O₂ Catalysis on Pt and Rh Clusters

Rate measurements, density functional theory (DFT) within the framework of transition state theory, and ensemble-averaging methods are used to probe oxygen selectivities, defined as the reaction probability ratios for O* reactions with CO and CH₄, during CH₄–O₂ catalysis on Pt and Rh clusters. CO₂ and H₂O are the predominant products, but small amounts of CO form as chemisorbed oxygen atoms (O*) are depleted from cluster surfaces. Oxygen selectivities, measured using ¹²CO–¹³CH₄–O₂ reactants, increase with O₂/ CO ratio and O* coverage and are much larger than unity at all conditions on Pt clusters. These results suggest that O* reacts much faster with CO than with CH₄, causing any CO that forms and desorbs from metal cluster surfaces to react along the reactor bed with other O* to produce CO₂ at any residence time required for detectable extents of CH₄ conversion. O* selectivities were also calculated by averaging DFTderived activation barriers for CO and CH₄ oxidation reactions over all distinct surface sites on cubo-octahedral Pt clusters (1.8 nm diameter, 201 Pt atoms) at low O* coverages, which are prevalent at low O₂ pressures during catalysis. CO oxidation involves non-activated molecular CO adsorption as the kinetically relevant step on exposed Pt atoms vicinal of chemisorbed O* atoms (on *–O* site pairs). CH₄ oxidation occurs via kinetically relevant C–H bond activation on *–* site pairs involving oxidative insertion of a Pt atom into one of the C–H bonds in CH₄, forming a three-centered HC₃–Pt–H transition state. C–H bond activation barriers reflect the strength of Pt–CH₃ and Pt–H interactions at the transition state, which correlates, in turn, with the Pt coordination and with CH₃ * binding energies. Ensemble-averaged O* selectivities increase linearly with O₂/CO ratios, which define the O* coverages, via a proportionality constant. The proportionality constant is given by the ratio of rate constants for O₂ dissociation and C–H bond activation elementary steps; the values for this constant are much larger than unity and are higher on larger Pt clusters (1.8–33 nm) at all temperatures (573–1273 K) relevant for CH₄–O₂ reactions. The barriers for the kinetically relevant C–H bond dissociation step increase, while those for CO oxidation remain unchanged as the Pt coordination number and cluster size increase, and lead, in turn, to higher O* selectivities on larger Pt clusters. Oxygen selectivities were much larger on Rh than Pt, because the limiting reactants for CO oxidation were completely consumed in ¹²CO–¹³CH₄–O₂ mixtures, consistent with lower CO/O₂ ratios measured by varying the residence time and O₂/CH₄ ratio independently in CH₄–O₂ reactions. These mechanistic assessments and theoretical treatments for O* selectivity provide rigorous evidence of low intrinsic limits of the maximum CO yields, thus confirming that direct catalytic partial oxidation of CH₄ to CO (and H₂) does not occur at the molecular scale on Pt and Rh clusters. CO (and H₂) are predominantly formed upon complete O₂ depletion from the sequential reforming steps.

Environmental Molecular Sciences Laboratory↗

Promotional effect of surface hydroxyls on electrochemical reduction of CO2 over SnOx/Sn electrode

Tin oxide (SnOx) formation on tin-based electrode surfaces during CO2 electrochemical reduction can have a significant impact on the activity and selectivity of the reaction. In the present study, density functional theory (DFT) calculations have been performed to understand the role of SnOx in CO2 reduction using a SnO monolayer on the Sn(112) surface as a model for SnOx. Water molecules have been treated explicitly and considered actively participating in the reaction. The results showed that H2O dissociates on the perfect SnO monolayer into two hydroxyl groups symmetrically on the surface. CO2 energetically prefers to react with the hydroxyl, forming a bicarbonate (HCO3(t)*) intermediate, which can then be reduced to either formate (HCOO*) by hydrogenating the carbon atom or carboxyl (COOH*) by protonating the oxygen atom. Both steps involve a simultaneous C-O bond breaking. Further reduction of HCOO* species leads to the formation of formic acid in the acidic solution at pH < 4, while the COOH* will decompose to CO and H2O via protonation. Whereas the oxygen vacancy (VO) in the monolayer maybe formed by the reduction of the monolayer, it can be recovered by H2O dissociation, resulting in two embedded hydroxyl groups. However, the hydroxylated surface with two symmetric hydroxyls is energetically more favorable for CO2 reduction than the hydroxylated VO surface with two embedded hydroxyls. The reduction potential for the former has a limiting-potential of -0.20 V (RHE), lower than that for the latter (-0.74 V (RHE)). Compared to the pure Sn electrode, the formation of SnOx monolayer on the electrode under the operating conditions promotes CO2 reduction more effectively by forming surface hydroxyls, thereby, providing a new channel via COOH* to the CO formation, although formic acid is still the major reduction product. The work was supported in part by National Natural Sciences Foundation of China (Grant #21373148 and #21206117). The High Performance Computing Center of Tianjin University is acknowledged for providing services to the computing cluster. CC acknowledges the support of 24 China Scholarship Council (CSC). QG acknowledges the support of NSF-CBET program (Award no. CBET-1438440). DM was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. The computations were performed in part using the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington.

bicarbonate↗

First principles, microkinetic, and experimental analysis of Lewis acid site speciation during ethanol dehydration on Sn-Beta zeolites

Density functional theory calculations are combined with kinetic measurements of ethanol dehydration to diethyl ether to identify the relative catalytic contributions of structurally distinct speciations of Sn sites in zeolite Beta frameworks. The structural complexities of the Beta framework require nonstandard techniques for entropy and energy calculations, including consideration of anharmonic effects in vibrational modes, employment of quasi-harmonic densities of states methods to evaluate entropies, and use of hybrid density functionals to evaluate binding energies. Calculated energies and entropies are used to construct a microkinetic model that is iteratively refined to identify all kinetically and thermodynamically sensitive reaction steps and intermediates which are subsequently treated with the higher-level methods. The rate and equilibrium constants obtained from this tiered approach agree well with measured reaction orders in ethanol and water. Site balances provide evidence for the interconversion of Sn sites between “closed” configurations that are tetra-coordinated to the framework, open configurations formed by hydrolysis that are tri-coordinated to the framework and contain a hydroxyl ligand and proximal silanol group (“hydroxy-open”), and open tri-coordinate configurations formed by reaction with ethanol, yielding an ethoxy ligand and proximal silanol group (“ethoxy-open”). Closed, hydroxy-open, and ethoxy-open Sn sites adsorb ethanol via distinct modes and react via distinct pathways, with the consequence that prevalent dehydration pathways depend on the speciation of Sn sites under reaction conditions. The kinetic modeling indicates that, under the conditions studied (404 K, 0.5–35 kPa ethanol, 0.1–50 kPa water), bimolecular dehydration on the closed Sn site is the sole kinetically-relevant step, and ethanol, ethanol-ethanol dimers, and ethanol-water dimers are the most abundant surface intermediates. In conclusion, these results highlight the importance of considering the distribution of heteroatom coordination modes to zeolite frameworks under reaction conditions, as well as pathways for their interconversion in the presence of reacting molecules, to obtain more robust mechanistic and kinetic interpretations of catalytic pathways in Lewis acid zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Abiotic phosphorus recycling from adsorbed ribonucleotides on a ferrihydrite-type mineral: Probing solution and surface species

Iron (Fe) (oxyhydr)oxide minerals, which are amongst most reactive minerals in soils and sediments, are known to exhibit strong adsorption of inorganic phosphate (P i ) and organophosphate (P o ) compounds. Beyond synthetic P o compounds, much still remains unknown about the reactivity of these minerals to transform naturally-occurring P o compounds to P i , particularly with respect to solution versus surface speciation of P o hydrolysis. To investigate this reactivity with a ferrihydrite-type mineral and ribonucleotides, we employed high-resolution liquid chromatography-mass spectrometry (LC-MS), X-ray absorption near-edge structure (XANES), Fourier-transform infrared (FTIR) spectroscopy, and molecular modeling. Kinetic experiments were conducted with the mineral (1 g L -1 ) reacted with adenosine monophosphate, diphosphate, or triphosphate (respectively AMP, ADP, ATP; 50 µM). Analysis of solution organic species by LC-MS implied that only adsorption occurred with AMP and ADP but both adsorption and dephosphorylation of ATP were evident. Maximum adsorption capacities per gram of mineral were 40.6 ± 0.8 µmol AMP, 35.7 ± 1.6 µmol ADP, and 10.9 ± 1.0 µmol ATP; solution dephosphorylated by-products accounted for 15% of initial ATP. Subsequent XANES analysis of the surface species revealed that 16% of adsorbed AMP and 30% of adsorbed ATP were subjected to dephosphorylation, which was not fully quantifiable from the solution measurements. Molecular simulations predicted that ADP and ATP were complexed mainly via the phosphate groups whereas AMP binding also involved multiple hydrogen bonds with the adenosine moiety; our FTIR data confirmed these binding confirmations. Lastly, our findings thus imply that specific adsorption mechanisms dictate the recycling and subsequent trapping of Pi from ribonucleotide-like biomolecules reacted with Fe (oxyhydr)oxide minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗