Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Effect of plasma voltage on sulfurization of α-MoO{sub 3} nanostructured thin films

In this report, the effect of plasma voltage on plasma assisted sulfurization (PAS) of vertically aligned molybdenum trioxide (α- MoO{sub 3}) nanoflakes (NFs) on glass substrates has been studied systematically. MoO{sub 3} NFs were deposited using plasma assisted sublimation process. These nanoflakes were subjected to H{sub 2}S/Ar plasma at two different plasma voltages 600 and 1000 volts; to study the effect of plasma ionization on degree of sulfurization of MoO{sub 3} into MoS{sub 2}. XRD and Raman analysis show that film sulfurized at 1000 volts have relatively higher degree of conversion into MoS{sub 2}, as more intense peaks of MoS{sub 2} and MoO{sub 2} are obtained than that sulfurized at 600 volts. HRTEM of sulfurized film shows that outer surface of nanoflake has been converted into MoS{sub 2} (4-5 monolayers). Meanwhile, MoO{sub 3} was reduced into MoO{sub 2} as confirmed by XRD and Raman results. All the observed results are well in consonance with each other.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Vibrational and electron-phonon coupling properties of $β$-Ga 2 O 3 from first-principles calculations: Impact on the mobility and breakdown field

The wide band gap semiconductor $β$-Ga 2 O 3 shows promise for applications in high-power and high-temperature electronics. The phonons of $β$-Ga 2 O 3 play a crucial role in determining its important material characteristics for these applications such as its thermal transport, carrier mobility, and breakdown voltage. In this work, we apply predictive calculations based on density functional theory and density functional perturbation theory to understand the vibrational properties, phonon-phonon interactions, and electron-phonon coupling of $β$-Ga 2 O 3 . We calculate the directionally dependent phonon dispersion, including the effects of LO-TO splitting and isotope substitution, and quantify the frequencies of the infrared and Raman-active modes, the sound velocities, and the heat capacity of the material. Our calculated optical-mode Grüneisen parameters reflect the anharmonicity of the monoclinic crystal structure of $β$-Ga 2 O 3 and help explain its low thermal conductivity. We also evaluate the electron-phonon coupling matrix elements for the lowest conduction band to determine the phonon mode that limits the mobility at room temperature, which we identified as a polar-optical mode with a phonon energy of 29 meV. We further apply these matrix elements to estimate the breakdown field of $β$-Ga 2 O 3 . Our theoretical characterization of the vibrational properties of $β$-Ga 2 O 3 highlights its viability for high-power electronic applications and provides a path for experimental development of materials for improved performance in devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unraveling cosmological anisotropies within stochastic gravitational wave backgrounds

Identifying the anisotropies in a cosmologically sourced stochastic gravitational wave background (SGWB) would be of significance in shedding light on the nature of primordial inhomogeneities. For example, if SGWB carries isocurvature fluctuations, it would provide evidence for a multi-field inflationary origin of these inhomogeneities. However, this is challenging in practice due to finite detector sensitivity and also the presence of the astrophysical foregrounds that can compete with the cosmological signal. In this work, we explore the prospects for measuring cosmological SGWB anisotropies in the presence of an astrophysical counterpart and detector noise. To illustrate the main idea, we perform a Fisher analysis using a well-motivated cosmological SGWB template corresponding to a first order phase transition, and an astrophysical SGWB template corresponding to extra-galactic binary mergers, and compute the uncertainty with which various parameters characterizing the isotropic and anisotropic components can be extracted. Finally, we also discuss some subtleties and caveats involving shot noise in the astrophysical foreground. Overall, we show that upcoming experiments, e.g., LISA, Taiji, Einstein Telescope, Cosmic Explorer, and BBO, can all be effective in discovering plausible anisotropic cosmological SGWBs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Frequency-resolved Raman for transient thermal probing and thermal diffusivity measurement

Steady state Raman has been widely used for temperature probing and thermal conductivity/conductance measurement in combination with temperature coefficient calibration. In this work, a new transient Raman thermal probing technique: frequency-resolved Raman (FR-Raman) is developed for probing the transient thermal response of materials and measuring their thermal diffusivity. The FR-Raman uses an amplitude modulated square-wave laser for simultaneous material heating and Raman excitation. The evolution profile of Raman properties: intensity, Raman wavenumber, and emission, against frequency are measured experimentally and reconstructed theoretically. They are used for fitting to determine the thermal diffusivity of the material under test. A Si cantilever is used to investigate the capacity of this new technique. The cantilever’s thermal diffusivity is determined as 9.57 × 10 -5 m 2 /s, 11.00 × 10 -5 m 2 /s and 9.02 × 10 -5 m 2 /s by fitting the Raman intensity, wavenumber and emission. The deviation from the reference value is largely attributed to thermal stress-induced material deflection and Raman drift, which could be significantly suppressed by using a higher sensitivity Raman spectrometer with lower laser energy. As a result, the FR-Raman provides a novel way for transient thermal characterization of materials with a ?m spatial resolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Optical-Gating of Spin-based Quantum States (Final Report)

This project developed a generalizable strategy for optical control of spin-based quantum states through the Photoisomerization-Induced Spin–Charge Excited State (PISCES) process, in which a photochromic spirooxazine ligand bound to an electronically bistable metal complex enables reversible, room-temperature optical switching of spin states in both dilute matrices and the solid state. A multidisciplinary team integrated synthesis, spectroscopy, theory, and surface science to establish design principles for opto-spintronic quantum materials. Systematic structure–property studies across four spirooxazine series revealed that donor–π–acceptor interactions govern thermal isomerization, which proceeds via a rotational pathway. Pulsed EPR measurements demonstrated millisecond-scale coherence times in cobalt-dioxolene-spirooxazine complexes, establishing their promise as optically addressable molecular qubits; the approach was extended to Cu(II), Ni(II), and lanthanide complexes, including optical modulation of zero-field splittings and clock transitions. Two-dimensional IR spectroscopy resolved picosecond ground-state population exchange dynamics, while ab initio calculations elucidated photoisomerization mechanisms and parametrized Hamiltonians for spin relaxation and decoherence. Toward device integration, the team fabricated 2D polymer scaffolds for covalent qubit organization, developed tip-enhanced Raman imaging of molecular monolayers, and demonstrated optical gating of gate voltage in spirooxazine-graphene field-effect transistors. The project produced numerous publications, dissertations, and presentations, and trained over 30 researchers.

2D polymers↗
DOE OSTI2023

Probing the decelerating trajectory of a Raman soliton using temporal reflection

Temporal reflection is a process where an optical pulse reflects off a moving boundary with different refractive indices across it. In a dispersive medium, this process creates a reflected pulse with a frequency shift that changes its speed. Such frequency shifts depend on the speed of the moving boundary. In this work, we propose and experimentally show that it is possible to probe the trajectory of the boundary by measuring the frequency shifts while changing the initial delay between the incident pulse and the boundary. We demonstrate this effect by reflecting a probe pulse off a short soliton, acting as a moving boundary that decelerates inside a photonic crystal fiber because of intrapulse Raman scattering. We deduce trajectory of the soliton from the measured spectral data for the reflected pulse.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

J-aggregation in porphyrin nanoparticles induced by diphenylalanine

In this report, L-diphenylalanine-decorated tetraphenylporphyrin (TPPtFF{sub C}) was synthesized and self-assembled into regular nano-architechtures. The morphology of the assemblies varied with the concentration of TPPtFF{sub C}. The absorption spectra of the nanoparticles show the Soret band merges with the Q bands and redistributes with great red-shift, indicative of the formation of J-aggregates of the porphyrin molecules. The fluorescence emission of the nanoparticles is merged and red-shifted to near-infrared region. Studies of absorption and fluorescence spectra reveal an indispensible role of diphenylalanine group in the formation of J-aggregates. The Raman spectra disclose that diprotonation of the porphyrin core contributes to delocalized coherent excited states in the nanoparticles. The positive cotton effect in circular dichroism spectra corresponding to the Soret band of TPPtFF{sub C} in solution confirms the formation of J-aggregates with right-handed chirality of the dipole moment. This report will shed light on the rational design of porphyrin-peptide conjugates to mimic naturally light-harvesting complexes. - Graphical abstract: TPPtFF{sub C} was synthesized and self-assembled into regular nano-architectures. Photophysical property studies of the nanoparticles indicate the porphyrin molecules form typical J-aggregates. The diprotonation of the porphyrin core and the FF group play an indispensible role in the formation of J-aggregates. - Highlights: • Porphyrin-peptide conjugates were self-assembled into regular nanostructures. • The photophysical properties of the nanoparicles indicate formation of typical J-aggregates. • The Raman spectra confirm that diprotonation of the porphyrin core contributes to exciton coherence in the nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

A qualitative study of spin polarization effect in defect tuned Co/graphene/Co nanostructures

Theoretical reports predict that in contact with a ferromagnetic giant spin, spin polarization evolves in defective graphene since defects in graphene act as local spin moments. We have synthesized different Co/graphene/Co nano spin valve like structures tuning the degree of defect applying ultrasonic vibration and characterized them by Raman spectroscopy. Initially with increasing I{sub D}/I{sub G} ratio in Raman spectra, antiferromagnetic coupling between the Co nanosheets on either sides of graphene enhances leading to betterment in spin transport through graphene. But for highest I{sub D}/I{sub G}, a totally new phenomenon called antiferro quadrupolar ordering (AFQ) takes place which eventually reduces the spin polarization effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Thermal effects in molecular gas-filled hollow-core fibers

Few-cycle sources with high average powers are required for applications to attosecond science. Raman-enhanced spectral broadening of Yb-doped laser amplifiers in molecular gases can yield few-cycle pulses, but thermal excitation of vibrational and rotational degrees of freedom may preclude high-power operation. Here we investigate changes in the spectral broadening associated with repetitive laser interactions in an N 2 O -filled hollow-core fiber. By comparing experimental measurements of the spectrum associated with each laser pulse to simulations based on a density matrix model, we find that losses in a spectral bandwidth and transmission are largely dominated by thermal excitation of the gas.

Beetar, John E. (ORCID:000000032885852X)↗
DOE OSTI2019

Study of Polysulfide Speciation in Lithium Sulfur Batteries using in situ Confocal Raman Microscopy: Introduction

A transition to sustainable energy is among society’s greatest challenges. With this change, the development of more efficient, safe, and cost-effective batteries is also necessary. Batteries are becoming ever more integral to today’s technology rich world. 3 Intermittent power sources, such as wind and solar, require storage devices to deliver a consistent energy supply. More ecofriendly, electric vehicles, have limited travel distances due to low energy density batteries. Phones and other personal electronics are also reliant on battery performance. An encouraging improvement in specific energy from current, lithium (Li) ion batteries, which are already nearing the bounds of their performance potential, are lithium sulfur (Li-S) batteries.

25 ENERGY STORAGE↗
DOE OSTI2014

Cardiovascular Risks Associated with Low Dose Ionizing Particle Radiation

Previous epidemiologic data demonstrate that cardiovascular (CV) morbidity and mortality may occur decades after ionizing radiation exposure. With increased use of proton and carbon ion radiotherapy and concerns about space radiation exposures to astronauts on future long-duration exploration-type missions, the long-term effects and risks of low-dose charged particle irradiation on the CV system must be better appreciated. Here we report on the long-term effects of whole-body proton ( 1 H; 0.5 Gy, 1 GeV) and iron ion ( 56 Fe; 0.15 Gy, 1GeV/nucleon) irradiation with and without an acute myocardial ischemia (AMI) event in mice. We show that cardiac function of proton-irradiated mice initially improves at 1 month but declines by 10 months post-irradiation. In AMI-induced mice, prior proton irradiation improved cardiac function restoration and enhanced cardiac remodeling. This was associated with increased pro-survival gene expression in cardiac tissues. In contrast, cardiac function was significantly declined in 56 Fe ion-irradiated mice at 1 and 3 months but recovered at 10 months. In addition, 56 Fe ion-irradiation led to poorer cardiac function and more adverse remodeling in AMI-induced mice, and was associated with decreased angiogenesis and pro-survival factors in cardiac tissues at any time point examined up to 10 months. This is the first study reporting CV effects following low dose proton and iron ion irradiation during normal aging and post-AMI. Finally, understanding the biological effects of charged particle radiation qualities on the CV system is necessary both for the mitigation of space exploration CV risks and for understanding of long-term CV effects following charged particle radiotherapy.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2017

On-Surface Synthesis and Characterization of 9-Atom Wide Armchair Graphene Nanoribbons

The bottom-up approach to synthesize graphene nanoribbons strives not only to introduce a band gap into the electronic structure of graphene but also to accurately tune its value by designing both the width and edge structure of the ribbons with atomic precision. Within this paper, we report the synthesis of an armchair graphene nanoribbon with a width of nine carbon atoms on Au(111) through surface-assisted aryl–aryl coupling and subsequent cyclodehydrogenation of a properly chosen molecular precursor. By combining high-resolution atomic force microscopy, scanning tunneling microscopy, and Raman spectroscopy, we demonstrate that the atomic structure of the fabricated ribbons is exactly as designed. Angle-resolved photoemission spectroscopy and Fourier-transformed scanning tunneling spectroscopy reveal an electronic band gap of 1.4 eV and effective masses of ≈0.1 m e for both electrons and holes, constituting a substantial improvement over previous efforts toward the development of transistor applications. We use ab initio calculations to gain insight into the dependence of the Raman spectra on excitation wavelength as well as to rationalize the symmetry-dependent contribution of the ribbons’ electronic states to the tunneling current. Lastly, we propose a simple rule for the visibility of frontier electronic bands of armchair graphene nanoribbons in scanning tunneling spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microstructure, Thermal, and Mechanical Properties Relationships in U and UZr Alloys (Final Report)

Uranium-zirconium (U-Zr) alloys are candidate fuel systems for transmutation based reactors that can be used to burn long-lived minor actinides and fission products in fast spectrum reactors. Metallic fuels have also been gaining more recent attention for applications as accident tolerant fuels, as well as for use in small modular reactors. This research focused on a “science-based” approach to capture the connections between U and U-Zr alloys’ three-dimensional (3-D) microstructure, thermal properties, and mechanical properties through closely coordinated experiments and modeling efforts from the unirradiated to the irradiated fuels. Advanced characterization and modeling techniques were used to understand irradiation-induced microstructural evolution and its direct impact on the thermal and mechanical properties of U and U-Zr fuel. Closely coordinated experiments and modeling were performed to provide crucial data that does not currently exist. Overall, this research spanned multiple length and time scales within the models and experiments. The scope of the research encompassed the understanding of the irradiation effects in U and various U-Zr alloys with particular attention paid to three task areas: (1) microstructural evolution, (2) in-situ/ex-situ thermal and mechanical properties, and (3) multiscale modeling connections to microstructure, thermal, and mechanical properties. This research resulted in (1) the 3-D characterization of neutron irradiated U-Zr fuel in multiple phase regions to better understand fission gas swelling and constituent redistribution, (2) development of a microstructural model linking thermal and mechanical properties via in situ Raman and nanoindentation, (3) and mesoscale phase field modeling was coupled with the AEH method in the MOOSE framework was used to calculate the effective thermal conductivities of U-Zr fuels consisting of α-U and δ-UZr 2 heterogeneous microstructures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

First-principles study of structural, electronic, vibrational, dielectric and elastic properties of tetragonal Ba₂YTaO₆

We report first-principles study of structural, electronic, vibrational, dielectric, and elastic properties of Ba₂YTaO₆, a pinning material in high temperature superconductors (HTS), by using density functional theory. By using different exchange-correlation potentials, the accuracy of the calculated lattice constants of Ba₂YTaO₆ has been achieved with GGA-RPBE, since many important physical quantities crucially depend on change in volume. We have calculated the electronic band structure dispersion, total and partial density of states to study the band gap origin and found that Ba₂YTaO₆ is an insulator with a direct band gap of 3.50 eV. From Mulliken population and charge density studies, we conclude that Ba₂YTaO₆ have a mixed ionic-covalent character. Moreover, the vibrational properties, born effective charges, and the dielectric permittivity tensor have been calculated using linear response method. Vibrational spectrum determined through our calculations agrees well with the observed Raman spectrum, and allows assignment of symmetry labels to modes. We perform a detailed analysis of the contribution of the various infrared-active modes to the static dielectric constant to explain its anisotropy, while electronic dielectric tensor of Ba₂YTaO₆ is nearly isotropic, and found that static dielectric constant is in good agreement with experimental value. The six independent elastic constants were calculated and found that tetragonal Ba₂YTaO₆ is mechanically stable. Other elastic properties, including bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and elastic anisotropy ratios are also investigated and found that Poisson's ratio and Young's modulus of Ba₂YTaO₆ are similar to that of other pinning materials in HTS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Dirac point and transconductance of top-gated graphene field-effect transistors operating at elevated temperature

Top-gated graphene field-effect transistors (GFETs) have been fabricated using bilayer epitaxial graphene grown on the Si-face of 4H-SiC substrates by thermal decomposition of silicon carbide in high vacuum. Graphene films were characterized by Raman spectroscopy, Atomic Force Microscopy, Scanning Tunnelling Microscopy, and Hall measurements to estimate graphene thickness, morphology, and charge transport properties. A 27 nm thick Al₂O₃ gate dielectric was grown by atomic layer deposition with an e-beam evaporated Al seed layer. Electrical characterization of the GFETs has been performed at operating temperatures up to 100 °C limited by deterioration of the gate dielectric performance at higher temperatures. Devices displayed stable operation with the gate oxide dielectric strength exceeding 4.5 MV/cm at 100 °C. Significant shifting of the charge neutrality point and an increase of the peak transconductance were observed in the GFETs as the operating temperature was elevated from room temperature to 100 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Facile synthesis of high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions with the assistance of lauric acid and dodecylamine

Highlights: • High surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions are synthesized by a facile method. • Hydrophobic surfaces are obtained with the addition of lauric acid and dodecylamine in the synthesis. • The introduced lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through a coordination effect. • Excellent thermal stability are obtained in lauric acid and dodecylamine assisted materials. - Abstract: Co-precipitation combined with the assistance of lauric acid and dodecylamine was used to synthesize high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions (CZ-L and CZ-D). The promotion effects of lauric acid and dodecylamine were studied systematically by N{sub 2} adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR and Raman analysis. After being thermal aged at 1100 °C for 4 h in air, CZ-L and CZ-D present high surface areas of 26 m{sup 2}/g and 16 m{sup 2}/g, respectively. The results indicate that the added lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through coordination effect. The obtained hydrophobic surface could greatly decrease the amount of superficial adsorbed water on the material and significantly reduce the surface tension. The addition of lauric acid and dodecylamine could also effectively support the network structures of the material and resist the collapse of pores upon drying and calcination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2015

Occurrence of magnetoelectric effect correlated to the Dy order in Dy{sub 2}NiMnO{sub 6} double perovskite

Magnetic, dielectric, and ac conductivity as well as room temperature structural and Raman studies are performed on double perovskite Dy{sub 2}NiMnO{sub 6}. The crystal structure of the compound adopts monoclinic P2{sub 1}/n space group, where alternate Mn and Ni distorted octahedral are arranged in anti-phase a{sup −} a{sup −} b{sup +} order in Glazer notation. Magnetization studies show two magnetic transitions around 100 K and 20 K which are related to the ordering of transition and rare earth cations moment, respectively. Temperature dependent dielectric permittivity shows Havriliak-Negami type thermally activated dielectric relaxation. The ac conductivity at different temperature is found to follow Jonscher power law behavior. Time-temperature scaling of the conductivity spectra reveals that the charge transport dynamics is independent of temperature. Intriguingly, an anomaly in the dielectric constant is observed close to the order of Dy moment which indicates intrinsic magnetoelectric coupling. The hybridization between Dy and Ni/Mn is suggested to be correlated with the magnetoelectric coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗