SEARCH · Engineering Papers

Results for “Pm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Climate, air quality, and equity benefits from hydrogen substitution for fossil fuels used in process heat

Fossil fuel combustion for process heat in heavy industry accounts for ~15% of all United States CO 2 emissions and emits PM 2.5 and its precursors, emissions that have a disproportionate impact on minority populations. Decarbonizing process heat in the U.S. via hydrogen substitution presents an opportunity to reduce emissions of CO 2 and PM 2.5 and mitigate resulting exposure disparity. Here, we show that hydrogen substitution in steelmaking provides a large reduction in CO 2 emissions and air quality-related premature mortality, while hydrogen substitution in petroleum refining substantially benefits disadvantaged communities. When reductions in CO 2 emissions and premature mortality are monetized using standard regulatory values, we find that the sum of air pollution and climate benefits outweighs the difference in private cost associated with hydrogen substitution in steelmaking, regardless of the method of hydrogen production. The approach developed here can support evaluations of equity-focused decarbonization strategies in other industries and for specific sites.

08 HYDROGEN↗

DOE OSTI2026

Four ppm measurement of the antihydrogen ground-state hyperfine splitting

The hydrogen atom is a touchstone for the foundations, evolution and frontiers of quantum theory. Key spectral lines of this atom have been determined to remarkable precision. Our research focuses on the study of antihydrogen, the antimatter counterpart of hydrogen. We test fundamental symmetries of nature (such as simultaneous charge conjugation, parity inversion, and time reversal or CPT symmetry) through precision comparisons of these atomic systems. Recent 1S–2S spectroscopic measurements on trapped antihydrogen have achieved relative precisions of parts per trillion. However, the ground-state hyperfine splitting, which is sensitive to the internal structure of the antiproton, has only been measured to 400 parts per million (ppm). Here we report a 4 ppm measurement of the antihydrogen ground-state hyperfine splitting energy a 1S , advancing the state-of-the-art precision by two orders of magnitude. From microwave spectroscopy experiments with roughly 24,000 anti-atoms, we determine ${a}_{1{\rm{S}}}/h=\mathrm{1,420,404.8}\pm 1.1(\mathrm{stat.})\pm 5.6\,(\mathrm{sys.})\,\text{kHz}$ in a 1-T magnetic field, consistent with expectations for hydrogen. At this level, our measurement is sensitive to the internal structure of the antiproton, which contributes at about 40 ppm and is approaching the limit of existing theoretical analyses. The gains we report are the product of marked advances in magnetic trap field control, stabilization and characterization; anti-atom spin-state manipulation; and improved antihydrogen accumulation rate.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2021

Measuring the structure and equation of state of polyethylene terephthalate at megabar pressures

Abstract We present structure and equation of state (EOS) measurements of biaxially orientated polyethylene terephthalate (PET, $$({\hbox {C}}_{10} {\hbox {H}}_8 {\hbox {O}}_4)_n$$ ( C 10 H 8 O 4 ) n , also called mylar) shock-compressed to ( $$155 \pm 20$$ 155 ± 20 ) GPa and ( $$6000 \pm 1000$$ 6000 ± 1000 ) K using in situ X-ray diffraction, Doppler velocimetry, and optical pyrometry. Comparing to density functional theory molecular dynamics (DFT-MD) simulations, we find a highly correlated liquid at conditions differing from predictions by some equations of state tables, which underlines the influence of complex chemical interactions in this regime. EOS calculations from ab initio DFT-MD simulations and shock Hugoniot measurements of density, pressure and temperature confirm the discrepancy to these tables and present an experimentally benchmarked correction to the description of PET as an exemplary material to represent the mixture of light elements at planetary interior conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Hard-to-soft transition-enhanced piezoelectricity in poly(vinylidene fluoride) via relaxor-like secondary crystals activated by high-power ultrasonication

We report although high piezoelectric coefficients have recently been observed in poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)] random copolymers, they have low Curie temperatures, which makes their piezoelectricity thermally unstable. It has been challenging to achieve high piezoelectric performance from the more thermally stable PVDF homopolymer. In this report, we describe how high-power ultrasonic processing was used to induce a hard-to-soft piezoelectric transition and improve the piezoelectric coefficient d 31 in neat PVDF. After high-power ultrasonication for 20 min, a uniaxially stretched and poled PVDF film exhibited a high d 31 of 50.2 ± 1.7 pm V -1 at room temperature. Upon heating to 65 °C, the d 31 increased to a maximum value of 76.2 ± 1.2 pm V -1 , and the high piezoelectric performance persisted up to 110 °C. The enhanced piezoelectricity was attributed to the relaxor-like secondary crystals in the oriented amorphous fraction, broken off from the primary crystals by ultrasonication, as suggested by differential scanning calorimetry and broadband dielectric spectroscopy studies.

relaxor-like secondary crystals↗

DOE OSTI2026

Range Hood Use and Effectiveness in Reducing Indoor Air Pollution During Gas and Induction Cooking

The Cooking Energy and Ventilation Impacts on Children's Asthma (CEVICA) study measured cooking frequency, range hood use, indoor air quality and respiratory health indicators of children with asthma living in homes with gas stoves in California's San Joaquin Valley. The study installed electric induction stoves and repeated measurements over three 2-week intensive periods, at baseline and at the end of two consecutive 3-month study phases. Stove replacements occurred at the start of Phase 1 or Phase 2 by random assignment. There were 4184 cooking events identified by automated analysis of time-series data from temperature sensors mounted above the cooktops and 1038 related range hood usage events detected from data recorded by anemometers, smart plugs, or motor loggers. Analysis of 1-minute resolved PM2.5 and NO 2 data identified and quantified 2685 PM 2.5 events and 2606 NO 2 events. Range hood use was characterized as a binary variable (>3 min vs. <3 min use). Range hood use was more common during cooking events associated with particle emissions and longer cooking durations. PM 2.5 concentrations during events with range hood use were comparable to those without use, which could result from limited effectiveness or if range hoods were preferentially used during higher-emission cooking scenarios. In homes with gas cooking, integrated NO 2 concentrations were about 45 percent higher during cooking events with no range hood use compared to those range hood use. The lowest pollutant levels were observed when the range hood operated for more than half of the cooking duration. These findings show that operation of venting range hood during cooking can substantially reduce short-term indoor exposure NO 2 in homes with gas cooking.

Fang, Yi↗

DOE OSTI2022

Effects of doping, hydrostatic pressure, and thermal quenching on the phase transitions and magnetocaloric properties in Mn 1– x Co x NiGe

The effects of doping, hydrostatic pressure, and thermal quenching on the phase transitions and magnetocaloric properties of the Mn 1–x Co x NiGe system have been investigated. Cobalt doping on the Mn site shifted the martensitic structural transition toward lower temperature until it was ultimately absent, leaving only a magnetic transition from a ferromagnetic (FM) to a paramagnetic (PM) state in the high-temperature hexagonal phase. Co-occurrence of the magnetic and structural transitions to form a first-order magnetostructural transition (MST) from the FM orthorhombic to the PM hexagonal phase was observed in samples with 0.05 < x < 0.20. An additional antiferromagnetic–ferromagnetic-like transition was observed in the martensite phase for 0.05 < x < 0.10, which gradually vanished with increasing Co concentration (x > 0.10) or magnetic field (H > 0.5 T). The application of external hydrostatic pressure shifted the structural transition to lower temperature until an MST was formed in samples with x = 0.03 and 0.05, inducing large magnetic entropy changes up to –80.3 J kg –1 K –1 (x = 0.03) for a 7-T field change under 10.6-kbar pressure. Similar to the effects of the application of hydrostatic pressure, an MST was formed near room temperature in the sample with x = 0.03 by annealing at high temperature (1200 °C) followed by quenching, resulting in a large magnetic entropy change of –56.2 J kg –1 K –1 . Furthermore, these experimental results show that the application of pressure and thermal quenching, in addition to compositional variations, are effective methods to create magnetostructural transitions in the MnNiGe system, resulting in large magnetocaloric effects.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

Robust unfolding of MeV x-ray spectra from filter stack spectrometer data

Here, we present an inversion method capable of robustly unfolding MeV x-ray spectra from filter stack spectrometer (FSS) data without requiring an a priori specification of a spectral shape or arbitrary termination of the algorithm. Our inversion method is based upon the perturbative minimization (PM) algorithm, which has previously been shown to be capable of unfolding x-ray transmission data, albeit for a limited regime in which the x-ray mass attenuation coefficient of the filter material increases monotonically with x-ray energy. Our inversion method improves upon the PM algorithm through regular smoothing of the candidate spectrum and by adding stochasticity to the search. With these additions, the inversion method does not require a physics model for an initial guess, fitting, or user-selected termination of the search. Instead, the only assumption made by the inversion method is that the x-ray spectrum should be near a smooth curve. Testing with synthetic data shows that the inversion method can successfully recover the primary large-scale features of MeV x-ray spectra, including the number of x-rays in energy bins of several-MeV widths to within 10%. Fine-scale features, however, are more difficult to recover accurately. Examples of unfolding experimental FSS data obtained at the Texas Petawatt Laser Facility and the OMEGA EP laser facility are also presented.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

The influence of laser energy on deuterium emission characteristics from a Zircaloy-4 plasma

Laser-produced plasma coupled with optical emission spectroscopy (OES) is a promising technique for detecting certain isotopes, with unique capabilities such as standoff and rapid detection and minimal to no sample preparation requirements. The key figure-of-merit for isotopic analysis using optical spectroscopy tools is the linewidth relative to the isotope shift. Although the isotopes of hydrogen (1H, 2H, and 3H) possess large isotopic shifts (1H–2H ≈ 180 pm, 1H–3H ≈ 240 pm), being a light element, the H transitions are susceptible to various broadening mechanisms in the plasma environment. One of the critical parameters that influence the linewidth of a transition in an LPP is the incident laser energy. In the present study, we evaluated the role of laser energy on plume expansion dynamics, deuterium emission intensity, and linewidth in a nanosecond laser-produced Zircaloy-4 plasma. The changes in 2Hα emission intensity and linewidth were investigated for varying laser fluence and time after plasma onset. Spatially resolved and spatially integrated OES were performed and compared to investigate the emission spectral features and linewidth of 2Hα. Monochromatic two-dimensional time-resolved imaging was also performed to understand the morphology of the deuterium and protium emission relative to all species in the plume. Our results showed that 1Hα and 2Hα emissions predominantly occur closer to the target. Measurements of 2Hα linewidth approached similar values at later times of plasma evolution regardless of the laser energy. The linewidths of the 2Hα transition showed insignificant differences between spatially resolved and spatially integrated measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances—Part 3: Optical properties of black and brown carbon emissions

Residential biomass combustion is a source of carbonaceous aerosol. Inefficient combustion, particularly of solid fuels produces large quantities of black and brown carbon (BC and BrC). These particle types are important as they have noted effects on climate forcing and human health. One method of measuring these quantities is by measurement of aerosol light-absorption and scattering, which can be performed using an aethalometer and nephelometer, respectively. These instruments are widely deployed in the study of ambient air and are frequently used in air quality modeling and source apportionment studies. In this study, we will describe (1) a method for measuring primary BC and BrC emissions from two residential log-fired wood hydronic heaters and (2) the BC and BrC emission from these devices over a wide range of operating conditions, such as cold-starts, warm-starts, four different levels of output ranging from 15% to 100% maximum rated output, and periods of repeated cycling. The range in flue-gas BC concentrations, measured using an aethalometer at the 880 nanometer (nm) wavelength, were between 5.09 × 10 2 and 2.24 × 10 4 micrograms per cubic meter (µg/m 3 ) while the scattering coefficient of the flue-gas, measured by a nephelometer at 880 nm, ranged between 2.20 × 10 3 and 8.56 × 10 5 inverse megameters (Mm –1 ). The BrC concentrations, measured using the 370 nm wavelength of an aethalometer, were between 9.10 × 10 1 and 3.56 × 10 4 µg/m 3 . The calculated Angstrom Absorption Exponent (AAE) of the flue-gas aerosol ranged between 1.54 and 3.63. Performing a comparison between the measured BC concentration and an external particulate matter (PM) concentration showed that overall BC makes up roughly a quarter of the PM emitted by either of the two appliances. Further for both appliances, the cold-start and the test phase immediately following it had the highest BC and BrC concentrations, the highest measured scattering coefficient, as well as a low AAE.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

Exact results for the orbital angular momentum of magnons on honeycomb lattices

In this work, we obtain exact results for the orbital angular momentum (OAM) of magnons at the high symmetry points of ferromagnetic (FM) and antiferromagnetic (AF) honeycomb lattices in the presence of Dzyallonshinskii–Moriya (DM) interactions. For the FM honeycomb lattice in the absence of DM interactions, the values of the OAM at the corners of the Brillouin zone (BZ) (${\mathbf{k}^*_1} = (0,2\sqrt{3}/9)2\pi/a $, ${\mathbf{k}^*_2} = (1/3,\sqrt{3}/9)2\pi/a,\ldots $) are alternately $\pm 3\hbar /16$ for both magnon bands. The presence of DM interactions dramatically changes those values by breaking the degeneracy of the two magnon bands. The OAM values are alternately $3\hbar /8$ and 0 for the lower magnon band and $-3\hbar /8$ and 0 for the upper magnon band. For the AF honeycomb lattice, the values of the OAM at the corners of the BZ are $\mp (3\hbar /16)\kappa $ on one of the degenerate magnon bands and $\pm (3\hbar /8) (1+\kappa /2)$ on the other, where κ measures the anisotropy and the result is independent of the DM interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Error field measurements and correction on MUSE permanent magnet stellarator

The magnetic field topology and error fields are measured in the MUSE permanent magnet stellarator with an electron beam and fluorescent rod. The effective magnetization of the magnets is determined by measuring rational flux surface locations. Electron magnetic drift effects must be considered self-consistently due to the small magnetic shear on MUSE. Error fields are characterized by flux surface shape deviation and magnetic island chain width and phase. Error fields are then corrected by adjusting the permanent magnet (PM) holders as rigid bodies. Resonant error fields are on the order of or smaller than 3 x 10 -6 of the toroidal field after correction and surface shape matches well with the design. Resonant components of the quasi-symmetry deviation are estimated, using a novel magnetic drift measurement, to be in the 10 −4 range. The PM approach is validated as a low-cost and precise way to build optimized stellarators.

electron beam mapping↗

DOE OSTI2021

Measurement of proton quenching in a plastic scintillator detector

The non-linear energy response of the plastic scintillator EJ-260 is measured with the MicroCHANDLER detector, using neutron beams of energy 5 to 27 MeV at the Triangle Universities Nuclear Laboratory. The first and second order Birks' constants are extracted from the data, and found to be $k_B = (8.70 \pm 0.93)\times 10^{-3}\ {\rm g/cm^2/MeV}$ and $k_C = (1.42 \pm 1.00) \times 10^{-5}\ {\rm (g/cm^2/MeV)^2}$. This result covers a unique energy range that is of direct relevance for fast neutron backgrounds in reactor inverse beta decay detectors. Furthermore, these measurements will improve the energy non-linearity modeling of plastic scintillator detectors. In particular, the updated energy response model will lead to an improvement of fast neutron modeling for detectors based on the CHANDLER reactor neutrino detector technology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Short-term impacts of 2017 western North American wildfires on meteorology, the atmosphere’s energy budget, and premature mortality

Abstract Western North American fires have been increasing in magnitude and severity over the last few decades. The complex coupling of fires with the atmospheric energy budget and meteorology creates short-term feedbacks on regional weather altering the amount of pollution to which Americans are exposed. Using a combination of model simulations and observations, this study shows that the severe fires in the summer of 2017 increased atmospheric aerosol concentrations leading to a cooling of the air at the surface, reductions in sensible heat fluxes, and a lowering of the planetary boundary layer height over land. This combination of lower-boundary layer height and increased aerosol pollution from the fires reduces air quality. We estimate that from start of August to end of October 2017, ∼400 premature deaths occurred within the western US as a result of short-term exposure to elevated PM 2.5 from fire smoke. As North America confronts a warming climate with more fires the short-term climate and pollution impacts of increased fire activity should be assessed within policy aimed to minimize impacts of climate change on society.

Bernstein, Diana N. (ORCID:0000000308279336)↗

DOE OSTI2024

Air quality and public health co-benefits of 100% renewable electricity adoption and electrification pathways in Los Angeles

To demonstrate how a mega city can lead in decarbonizing beyond legal mandates, the city of Los Angeles (LA) developed science-based, feasible pathways towards utilizing 100% renewable energy for its municipally-owned electric utility. Aside from decarbonization, renewable energy adoption can lead to co-benefits such as improving urban air quality from reductions in combustion-related emissions of oxides of nitrogen (NO x ), primary fine particulate matter (PM 2.5 ) and others. Herein, we quantify changes to air pollutant concentrations and public health from scenarios of 100% renewable electricity adoption in LA in 2045, alongside aggressive electrification of end-use sectors. Our analysis suggests that while ensuring reliable electricity supply, reductions in emissions of air pollutants associated with the 100% renewable electricity scenarios can lead to 8% citywide reductions of PM 2.5 concentration while increasing ozone concentration by 5% relative to a 2012 baseline year, given identical meteorology conditions. The combination of these concentration changes could result in net monetized public health benefits (driven by avoided deaths) of up to $\$$1.4 billion in year 2045 in LA, results potentially replicable for other city-scale decarbonization scenarios.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Scanning tunneling microscopy study of epitaxial Fe 3 GeTe 2 monolayers on Bi 2 Te 3

Abstract Introducing magnetism to the surface state of topological insulators, such as Bi 2 Te 3 , can lead to a variety of interesting phenomena. We use scanning tunneling microscopy (STM) to study a single quintuple layer (QL) of the van der Waals magnet Fe 3 GeTe 2 (FGT) that is grown on Bi 2 Te 3 via molecular beam epitaxy. STM topographic images show that the FGT grows as free-standing islands on Bi 2 Te 3 and outwards from Bi 2 Te 3 steps. Atomic resolution imaging shows triangular lattices of 390 ± 10 pm for FGT and 430 ± 10 pm for Bi 2 Te 3 , consistent with the respective bulk crystals. A moiré pattern is observed on FGT regions with a periodicity of 4.3 ± 0.4 nm that can be attributed solely to this lattice mismatch and thus indicates zero rotational misalignment. While most of the surface is covered by a single QL of the FGT, there are small double QL regions, as well as regions with distinct chemical terminations due to an incomplete QL. The most common partial QL surface termination is the FeGe layer, in which the top two atomic layers are missing. This termination has a distinctive electronic structure and a 3 x 3 R 30 ∘ reconstruction overlaid on the moiré pattern in STM images. Magnetic circular dichroism measurements confirm these thin FGT films are ferromagnetic withT C ∼190 K.

Materials Science↗

DOE OSTI2026

Association of short-term ambient environmental exposures with suicide and drug overdose deaths among U.S. Veterans

This study examined associations between short-term ambient environmental exposures and suicide (n = 3210) and overdose mortality (n = 4293; 2226 opioid-related) among U.S. Veterans from 2018 to 2019. Daily exposure to 24-hour maximum temperature, average atmospheric pressure, average fine particulate matter (PM 2.5 ), 1-hour maximum nitrogen dioxide (NO 2 ), and 8-hour maximum ozone (O 3 ) was assessed at the decedent's county of residence on the day of death and up to 6 days prior. A national bi-directional, time-stratified case-crossover design was applied. Conditional logistic regression models estimated associations between each exposure and suicide or overdose deaths, overall, and stratified by season, region, elevation, and urbanicity. Over lag days 0-1, an interquartile range increase in maximum temperature was associated with increased suicide (19%) and overdose (27%) mortality, with stronger summer effects for suicide (55%) and overdose (71%). In winter, interquartile range increases in atmospheric pressure, PM 2.5 , and NO 2 were associated with 104%, 15%, and 19% increases in suicide mortality. Maximum temperature was associated with a 22% increase in suicide risk in metropolitan areas and 57% in the Western U.S., while NO 2 was associated with a 26% increase in overdose mortality in nonmetropolitan areas. Findings suggest environmental stressors contribute to suicide and overdose mortality among Veterans, supporting environmentally informed prevention efforts.

air pollution↗

DOE OSTI2020

MUSEQuBES: calibrating the redshifts of Ly α emitters using stacked circumgalactic medium absorption profiles

ABSTRACT Ly α emission lines are typically found to be redshifted with respect to the systemic redshifts of galaxies, likely due to resonant scattering of Ly α photons. Here, we measure the average velocity offset for a sample of 96 z ≈ 3.3 Ly α emitters (LAEs) with a median Ly α flux (luminosity) of ${\approx}10^{-17}~\rm erg~cm^{-2}~s^{-1}$ (${\approx}10^{42}~\rm erg~s^{-1}$) and a median star formation rate (SFR) of ≈1.3 $\rm M_{\odot }~yr^{-1}$ (not corrected for possible dust extinction), detected by the Multi-Unit Spectroscopic Explorer as part of our MUSEQuBES circumgalactic medium (CGM) survey. By postulating that the stacked CGM absorption profiles of these LAEs, probed by eight background quasars, must be centred on the systemic redshift, we measure an average velocity offset, Voffset = 171\pm 8 km s−1, between the Ly α emission peak and the systemic redshift. The observed Voffset is lower by factors of ≈1.4 and ≈2.6 compared to the velocity offsets measured for narrow-band-selected LAEs and Lyman break galaxies, respectively, which probe galaxies with higher masses and SFRs. Consistent with earlier studies based on direct measurements for individual objects, we find that the Voffset is correlated with the full width at half-maximum of the red peak of the Ly α line, and anticorrelated with the rest-frame equivalent width. Moreover, we find that Voffset is correlated with SFR with a sub-linear scaling relation, $V_{\rm offset}\propto \rm SFR^{0.16\pm 0.03}$. Adopting the mass scaling for main-sequence galaxies, such a relation suggests that Voffset scales with the circular velocity of the dark matter haloes hosting the LAEs.

Muzahid, Sowgat↗

DOE OSTI2020

Imaging systematics and clustering of DESI main targets

ABSTRACT We evaluate the impact of imaging systematics on the clustering of luminous red galaxies (LRG), emission-line galaxies (ELG), and quasars (QSO) targeted for the upcoming Dark Energy Spectroscopic Instrument (DESI) survey. Using Data Release 7 of the DECam Legacy Survey, we study the effects of astrophysical foregrounds, stellar contamination, differences between north galactic cap and south galactic cap measurements, and variations in imaging depth, stellar density, galactic extinction, seeing, airmass, sky brightness, and exposure time before presenting survey masks and weights to mitigate these effects. With our sanitized samples in hand, we conduct a preliminary analysis of the clustering amplitude and evolution of the DESI main targets. From measurements of the angular correlation functions, we determine power law fits $r_0 = 7.78 \pm 0.26\, h^{-1}$Mpc, γ = 1.98 ± 0.02 for LRGs and $r_0 = 5.45 \pm 0.1\, h^{-1}$Mpc, γ = 1.54 ± 0.01 for ELGs. Additionally, from the angular power spectra, we measure the linear biases and model the scale-dependent biases in the weakly non-linear regime. Both sets of clustering measurements show good agreement with survey requirements for LRGs and ELGs, attesting that these samples will enable DESI to achieve precise cosmological constraints. We also present clustering as a function of magnitude, use cross-correlations with external spectroscopy to infer dN/dz and measure clustering as a function of luminosity, and probe higher order clustering statistics through counts-in-cells moments.

79 ASTRONOMY AND ASTROPHYSICS↗