Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Large emissions of CO 2 and CH 4 due to active-layer warming in Arctic tundra

Climate warming may accelerate decomposition of Arctic soil carbon, but few controlled experiments have manipulated the entire active layer. To determine surface-atmosphere fluxes of carbon dioxide and methane under anticipated end-of-century warming, here we used heating rods to warm (by 3.8 °C) to the depth of permafrost in polygonal tundra in $Utqia\dot{g}vik$ (formerly Barrow), Alaska and measured fluxes over two growing seasons. We show that ecosystem respiration is ~30% higher in warmed plots than in control plots (0.99 μmol m -2 s -1 versus 0.67 μmol m -2 s -1 , p < 0.0001, n = 79). Additionally, the observed temperature sensitivity (Q 10 of 2.8) is higher than that imposed for soil in Earth system models or reported by arctic experiments warming only the surface. A shoulder-season warming experiment revealed that rapid snow melt, which is becoming a more common event, can result in large methane emissions that may have otherwise been oxidized to carbon dioxide. Thus, warming promotes greenhouse gas emissions from the whole, deepening active layer and may contribute to climate change amplification.

54 ENVIRONMENTAL SCIENCES↗

Warming induces unexpectedly high soil respiration in a wet tropical forest

Abstract Tropical forests are a dominant regulator of the global carbon cycle, exchanging more carbon dioxide with the atmosphere than any other terrestrial biome. Climate models predict unprecedented climatic warming in tropical regions in the coming decades; however, in situ field warming studies are severely lacking in tropical forests. Here we present results from an in situ warming experiment in Puerto Rico, where soil respiration responses to + 4 o C warming were assessed half-hourly for a year. Soil respiration rates were 42-204% higher in warmed relative to ambient plots, representing some of the highest soil respiration rates reported for any terrestrial ecosystem. While respiration rates were significantly higher in the warmed plots, the temperature sensitivity (Q 10 ) was 71.7% lower, pointing to a mechanistic shift. Even with reduced Q 10 , if observed soil respiration rates persist in a warmer world, the feedback to future climate could be considerably greater than previously predicted or observed.

Science & Technology - Other Topics↗

The Arctic Plant Aboveground Biomass Synthesis Dataset

Plant biomass is a fundamental ecosystem attribute that is sensitive to rapid climatic changes occurring in the Arctic. Nevertheless, measuring plant biomass in the Arctic is logistically challenging and resource intensive. Lack of accessible field data hinders efforts to understand the amount, composition, distribution, and changes in plant biomass in these northern ecosystems. Here, we present The Arctic plant aboveground biomass synthesis dataset, which includes field measurements of lichen, bryophyte, herb, shrub, and/or tree aboveground biomass (g m -2 ) on 2,327 sample plots from 636 field sites in seven countries. We created the synthesis dataset by assembling and harmonizing 32 individual datasets. Aboveground biomass was primarily quantified by harvesting sample plots during mid- to late-summer, though tree and often tall shrub biomass were quantified using surveys and allometric models. Each biomass measurement is associated with metadata including sample date, location, method, data source, and other information. This unique dataset can be leveraged to monitor, map, and model plant biomass across the rapidly warming Arctic.

54 ENVIRONMENTAL SCIENCES↗

Plant traits, productivity, biomass and soil properties from forest sites in the Pacific Northwest, 1999–2014

Plant trait measurements are needed for evaluating ecological responses to environmental conditions and for ecosystem process model development, parameterization, and testing. Here, we present a standardized dataset integrating measurements from projects conducted by the Terrestrial Ecosystem Research and Regional Analysis- Pacific Northwest (TERRA-PNW) research group between 1999 and 2014 across Oregon and Northern California, where measurements were collected for scaling and modeling regional terrestrial carbon processes with models such as Biome-BGC and the Community Land Model. The dataset contains measurements of specific leaf area, leaf longevity, leaf carbon and nitrogen for 35 tree and shrub species derived from more than 1,200 branch samples collected from over 200 forest plots, including several AmeriFlux sites. The dataset also contains plot-level measurements of forest composition, structure (e.g., tree biomass), and productivity, as well as measurements of soil structure (e.g., bulk density) and chemistry (e.g., carbon). Publically-archiving regional datasets of standardized, co-located, and geo-referenced plant trait measurements will advance the ability of earth system models to capture species-level climate sensitivity at regional to global scales.

09 BIOMASS FUELS↗

Correlating the hydrogen evolution reaction activity in alkaline electrolytes with the hydrogen binding energy on monometallic surfaces

The slow reaction kinetics of the hydrogen evolution and oxidation reactions (HER/HOR) on platinum in alkaline electrolytes hinders the development of alkaline electrolysers, solar hydrogen cells and alkaline fuel cells. A fundamental understanding of the exchange current density of the HER/HOR in alkaline media is critical for the search and design of highly active electrocatalysts. By studying the HER on a series of monometallic surfaces, we demonstrate that the HER exchange current density in alkaline solutions can be correlated with the calculated hydrogen binding energy (HBE) on the metal surfaces via a volcano type of relationship. The HER activity varies by several orders of magnitude from Pt at the peak of the plot to W and Au located on the bottom of each side of the plot, similar to the observation in acids. Such a correlation suggests that the HBE can be used as a descriptor for identifying electrocatalysts for HER/HOR in alkaline media, and that the HER exchange current density can be tuned by modifying the surface chemical properties.

Sheng, WC↗

Watermelon-like iron nanoparticles: Cr doping effect on magnetism and magnetization interaction reversal

Chromium (Cr) forms a solid solution with iron (Fe) lattice when doped in core-shell iron -iron oxide nanocluster (NC) and shows a mixed phase of sigma (σ) FeCr and bcc Fe. The Cr dopant affects heavily the magnetization and magnetic reversal process, and causes the hysteresis loop to shrink near the zero field axis. Dramatic transformation happens from dipolar interaction (0 at. % Cr) to strong exchange interaction (8 at. % of Cr) is confirmed from the Henkel plot and delta M plot, and is explained by a water-melon model of core-shell NC system.

Environmental Molecular Sciences Laboratory↗

Effect of Dispersion on Surface Interactions of Cobalt(II) Octaethylporphyrin Monolayer on Au(111) and HOPG(0001) Substrates: a Comparative First Principles Study

A density functional theory study of a cobalt(II) octaethylporphyrin (CoOEP) monolayer on Au(111) and HOPG(0001) surfaces was performed under periodic boundary conditions. Calculations with and without dispersion corrections are performed and the effect of van der Waals forces on the interface properties is analyzed. Calculations have determined that the CoOEP molecule tends to bind at the 3-fold and the 6-fold center sites on Au(111) and HOPG(0001), respectively. Geometric optimizations at the center binding sites have indicated that the porphyrin molecules (in the monolayer) lie flat on both substrates. Calculations also reveal that the CoOEP monolayer binds slightly more strongly to Au(111) than to HOPG(0001). Charge density difference plots disclose that charge is redistributed mostly around the porphyrin plane and the first layer of the substrates. Dispersion interactions cause a larger substrate to molecule charge pushback on Au(111) than on HOPG. CoOEP adsorption tends to lower the work functions of either substrate, qualitatively agreeing with the experimental photoelectron spectroscopic data. Comparison of the density of states (DOS) of the isolated CoOEP molecule with that on gold and HOPG substrates showed significant band shifts around the Fermi energy due to intermolecular orbital hybridization. Simulated STM images were plotted with the Tersoff–Hamann approach using the local density of states, which also agree with the experimental results. This study elucidates the role of dispersion for better describing porphyrin–substrate interactions. A DFT based overview of geometric, adsorption and electronic properties of a porphyrin monolayer on conductive surfaces is presented.

Environmental Molecular Sciences Laboratory↗

Quantifying vorticity in magnetic particle suspensions driven by symmetric and asymmetric multiaxial fields.

We recently reported two methods of inducing vigorous fluid vorticity in magnetic particle suspensions. The first method employs symmetry-breaking rational fields. These fields are comprised of two orthogonal ac components whose frequencies form a rational number and an orthogonal dc field that breaks the symmetry of the biaxial ac field to create the parity required to induce deterministic vorticity. The second method is based on rational triads, which are fields comprised of three orthogonal ac components whose frequency ratios are rational (e.g., 1 : 2 : 3). For each method a symmetry theory has been developed that enables the prediction of the direction and sign of vorticity as functions of the field frequencies and phases. However, this theory has its limitations. It only applies to those particular phase angles that give rise to fields whose Lissajous plots, or principal 2-d projections thereof, have a high degree of symmetry. Nor can symmetry theory provide a measure of the magnitude of the torque density induced by the field. In this paper a functional of the multiaxial magnetic field is proposed that not only is consistent with all of the predictions of the symmetry theories, but also quantifies the torque density. This functional can be applied to fields whose Lissajous plots lack symmetry and can thus be used to predict a variety of effects and trends that cannot be predicted from the symmetry theories. These trends include the dependence of the magnitude of the torque density on the various frequency ratios, the unexpected reversal of flow with increasing dc field amplitude for certain symmetry-breaking fields, and the existence of off-axis vorticity for rational triads, such as 1 : 3 : 5, that do not have the symmetry required to analyze by symmetry theory. As a result, experimental data are given that show the degree to which this functional is successful in predicting observed trends.

36 MATERIALS SCIENCE↗

Understanding resistances in capacitive deionization devices

The desalination characteristics of capacitive deionization (CDI) are significantly impacted by the cell resistance. Here we apply electrochemical impedance spectroscopy (EIS) to analyze the resistive properties of a CDI device, which include EIS measurements on a complete assembled cell (in two wire mode) and EIS measurements with additional contacts to decouple electrode/electrolyte and contact impedances (four wire mode). These measurements shed light on the interface between current collector and electrode as well as the internal capacitive and resistive elements of the cell. With two-wire and four-wire EIS measurements, we find that the often observed high-frequency arc(s) in the impedance spectra can be due to contact effects and/or an internal ionic-transfer resistance that is locally in parallel with macropore wall capacitance. In some cases, the two associated arcs in the Nyquist plot are overlapping and present simultaneously, making their identification in the EIS spectra difficult unless both two-wire and four-wire measurements are made. Despite causing a large high-frequency arc in the Nyquist plot, we find that the apparent internal ionic-transfer resistance is negligible compared to the resistances of the electrode, separator, and external electronic components. Here, an investigation of the contact impedance between the electrode and current collector reveals a parallel RC arc that can grow over time if an improper material is used (e.g., titanium). In our system, the electrode ionic resistance dominates the total Ohmic power dissipation, which has implications for scale-up of CDI systems and future improvements of cell design.

36 MATERIALS SCIENCE↗

Plot2Spectra: an automatic spectra extraction tool

Scientists cannot easily make use of numerical data encoded in plot images, such as of spectroscopy data, in scientific literature. Plot2Spectra was developed to use computer vision tools to automatically digitize plot images.

Jiang, Weixin↗

Influence of tritium exposure route on vegetation types at the Savannah River Site

Plant, soil, water, and other media from various locations at the Savannah River Site were measured for total tritium (T) content and T speciation to characterize T in these areas, as well as investigate its uptake behavior and the transport of T species in these media. This characterization included the isolation and measurement of T in tritiated water (HTO), and (when possible) exchangeable organic bound T (E-OBT) and non-exchangeable organic bound T (NE-OBT). Two areas of interest were investigated: (1) a holding pond with T-contaminated water and (2) open basins or streams with low to background levels of T. Water in the holding pond is used to irrigate forest plots in the local area as a T remediation approach. This study compares the analytical data for water, soil/sediment, plants, and lichens from these locations. Here, the results indicate that the behavior of T in plants from these areas can be a function of one or more of the following: seasonal precipitation, the plant's primary route of access to the T-contamination (such as water uptake through the root vs. shoot), plant physical location (relative to T-contaminated water sources), plant rooting depth, pond water level, and plant height above the ground. Total T concentrations were lowest in the un-irrigated forest plants, followed by irrigated forest plants, shallow rooting plants near the pond, deep rooting plants further from the pond, and then water-saturated plants. The OBT:HTO and NE-OBT:E-OBT ratios were always greater for plants from irrigated forest plots compared to those from the holding pond.

36 MATERIALS SCIENCE↗

Study of nonlinear oscillations in a glow discharge plasma using empirical mode decomposition and Hilbert Huang transform

Hilbert Huang transform (HHT) based time series analysis was carried out on nonlinear floating potential fluctuations obtained from hollow cathode glow discharge plasma in the presence of anode glow. HHT was used to obtain contour plots and the presence of nonlinearity was studied. Frequency shift with time, which is a typical nonlinear behaviour, was detected from the contour plots. Various plasma parameters were measured and the concepts of correlation coefficients and the physical contribution of each intrinsic mode function have been discussed. Physically important quantities such as instantaneous energy and their uses in studying physical phenomena such as intermittency and non-stationary data have also been discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical verification of Orbit and Nemato codes for magnetic topology diagnosis

We present the results of a benchmark study involving the Orbit and Nemato codes. The two codes have been used to compare magnetic structure in a reversed-field pinch (RFP), where conserved magnetic structures/islands appear both in the core (dominated by m = 1 modes) and in the edge (dominated by m = 0 modes). As input, a snapshot of a 3D nonlinear MHD visco-resistive simulation (produced by the SpeCyl code) has been used. The first test is given by the reconstruction via Poincaré surface of section plot of an island generated by a single mode. In this case, the magnetic field topology corresponds to a time-independent Hamiltonian and shows conserved flux-surfaces used as a reference. Both codes successfully yield field lines which follow the same flux surfaces, in both the m = 1 and m = 0 cases. The benchmark between the codes has then been extended to a more complex configuration with chaotic magnetic field, using as input a fully 3D multiple mode RFP condition, characterized by the typical chain of edge magnetic islands providing a transport barrier. Finally, a quantitative benchmark has been performed, using the same 3D input, by estimating the correlation length of the magnetic field line in a bounded stochastic domain. The conclusion is that both codes yield consistent Poincaré plot structure on one hand, and very good quantitative agreement in correlation length estimate. This gives confidence to the application of both codes to magnetic topology in the RFX-mod device, for which they are used routinely, as well as for a generic fusion device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dielectric property of NiTiO{sub 3} doped substituted ortho-chloropolyaniline composites

Ortho-chloropolyaniline (OCP)-NiTiO{sub 3} composites have been synthesized via in-situ polymerization of ortho-chloroaniline with various weight percentages of NiTiO{sub 3.} Fourier Transform Infrared spectroscopic studies of Ortho-chloropolyaniline and its composites indicated the formation of composites as a result of Vander Waal's interaction between OCP and NiTiO{sub 3} particles. Surface morphology of OCP and OCP-NiTiO{sub 3} composites were studied using Scanning Electron Microscope (SEM). The SEM micrographs indicated a modified morphology after the composite formation. Dielectric properties and electric modulus of OCP and OCP-NiTiO{sub 3} composites have been investigated in the frequency range of 50 Hz – 5 MHz. It has been noticed that electrical resistance decreases with increase in weight percentage of NiTiO{sub 3} particles in polymer matrix as well as with applied frequency. The display of semicircular arcs in Cole-Cole plots indicates the formation of series resistor and capacitor in network causing a decrease in the relaxation time and as a result conductivity enhances in these composites. The facile and cost effective synthesis process and excellent dielectric and conductivity response of these materials makes them promising materials for practical applications.

36 MATERIALS SCIENCE↗

Evaluation of minority and majority spin band energies of ferromagnetic GdN thin film using optical absorption spectroscopy

Temperature dependent optical Tauc plots of AlN/GdN/AlN heterostructures have showed two optically induced transitions, and those optical transitions could be attributed to the minority and majority spin band energy. In contrast, temperature dependent magnetization measurements of GdN thin film provide direct evidence of spin ordering below 39 K, and which is also evidenced by Arrott plots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature spin dynamics in Cr{sub 7}Ni-Cu-Cr{sub 7}Ni coupled molecular rings

Proton Nuclear Magnetic Resonance (NMR) relaxation measurements have been performed down to very low temperature (50 mK) to determine the effect of coupling two Cr{sub 7}Ni molecular rings via a Cu{sup 2+} ion. No difference in the spin dynamics was found from nuclear spin lattice relaxation down to 1.5 K. At lower temperature, the {sup 1}H-NMR line broadens dramatically indicating spin freezing. From the plot of the line width vs. magnetization, it is found that the freezing temperature is higher (260 mK) in the coupled ring with respect to the single Cr{sub 7}Ni ring (140 mK)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Signature of quantum entanglement in NH{sub 4}CuPO{sub 4}·H{sub 2}O

Entangled solid state systems have gained a great deal of attention due to their fruitful applications in modern quantum technologies. Herein, detection of entanglement content from experimental magnetic susceptibility and specific heat data is reported for NH{sub 4}CuPO{sub 4}·H{sub 2}O in its solid state crystalline form. NH{sub 4}CuPO{sub 4}·H{sub 2}O is a prototype of Heisenberg spin 1/2 dimer system. Temperature dependent magnetic susceptibility and specific data are fitted to an isolated dimer model and the exchange coupling constant is determined. Field dependent magnetization isotherms taken at different temperatures are plotted in a three dimensional plot. Subsequently, entanglement is detected both from susceptibility and specific heat through two different entanglement measures; entanglement witness and entanglement of formation. The temperature evolution of entanglement is studied and the critical temperature is determined up to which entanglement exists. Temperature dependent nature of entanglement extracted from susceptibility and specific heat shows good consistency with each other. Moreover, the field dependent entanglement is also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

How much improvement in thermoelectric performance can come from reducing thermal conductivity?

Large improvements in the performance of thermoelectric materials have come from designing materials with reduced thermal conductivity. Yet as the thermal conductivity of some materials now approaches their amorphous limit, it is unclear if microstructure engineering can further improve thermoelectric performance in these cases. In this contribution, we use large data sets to examine 300 compositions in 11 families of thermoelectric materials and present a type of plot that quickly reveals the maximum possible zT that can be achieved by reducing the thermal conductivity. This plot allows researchers to quickly distinguish materials where the thermal conductivity has been optimized from those where improvement can be made. Moreover, through these large data sets we examine structure-property relationships to identify methods that decrease thermal conductivity and improve thermoelectric performance. We validate, with the data, that increasing (i) the volume of a unit cell and/or (ii) the number of atoms in the unit cell decreases the thermal conductivity of many classes of materials, without changing the electrical resistivity.

36 MATERIALS SCIENCE↗