SEARCH · Engineering Papers

Results for “Phase distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Local properties of the large-scale peaks of the CMB temperature

In the present work, we study the largest structures of the CMB temperature measured by Planck in terms of the most prominent peaks on the sky, which, in particular, are located in the southern galactic hemisphere. Besides these large-scale features, the well-known Cold Spot anomaly is included in the analysis. All these peaks would contribute significantly to some of the CMB large-scale anomalies, as the parity and hemispherical asymmetries, the dipole modulation, the alignment between the quadrupole and the octopole, or in the case of the Cold Spot, to the non-Gaussianity of the field. The analysis of the peaks is performed by using their multipolar profiles, which characterize the local shape of the peaks in terms of the discrete Fourier transform of the azimuthal angle. In order to quantify the local anisotropy of the peaks, the distribution of the phases of the multipolar profiles is studied by using the Rayleigh random walk methodology. Finally, a direct analysis of the 2-dimensional field around the peaks is performed in order to take into account the effect of the galactic mask. The results of the analysis conclude that, once the peak amplitude and its first and second order derivatives at the centre are conditioned, the rest of the field is compatible with the standard model. In particular, it is observed that the Cold Spot anomaly is caused by the large value of curvature at the centre.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1978

Automatic phase control in solar power satellite systems

Various approaches to the problem of generating, maintaining and distributing a coherent, reference phase signal over a large area are suggested, mathematically modeled and analyzed with respect to their ability to minimize: phase build-up, beam diffusion and beam steering phase jitter, cable length, and maximize power transfer efficiency. In addition, phase control configurations are suggested which alleviate the need for layout symmetry.

Lindsey, W. C.↗

DOE OSTI2018

4-Hydroxybenzoic acid (4-HBA) enhances the sensitivity of human breast cancer cells to adriamycin as a specific HDAC6 inhibitor by promoting HIPK2/p53 pathway

Highlights: • 4-Hydroxybenzoic acid enhances the sensitivity of MCF-7/ADM to ADM-induced apoptosis. • 4-Hydroxybenzoic acid induces apoptosis in breast cancer cell lines. • 4-Hydroxybenzoic acid induces cell cycle arrest in G2/M phase. Breast cancer is reported a very complex disease along with heterogeneous morphological characteristics and unrelated clinical behavior, and is a leading cancer among female. Nevertheless, chemo-resistance is frequently observed. Adriamycin (ADM) is a always employed drug to treat clinical breast cancer. However, strong resistance to ADM limited its clinical efficacy. Deregulation of HDAC6 activity is linked to various diseases including cancer resulting in accumulating interest for developing HDAC6 inhibitors. In the present study, for the first time, we found that 4-Hydroxybenzoic acid (4-HBA), as histone deacetylase 6 (HDAC6) inhibitor, could successfully reverse ADM resistance in human breast cancer cells. 4-HBA significantly promoted the anticancer effect of ADM on apoptosis induction, as evidenced by the increased expressions of Caspase-3 and PARP cleavage, which was associated with the promotion p53 and homeodomain interacting protein kinase-2 (HIPK2) expressions in ADM-resistant breast cancer cells. Furthermore, the suppressive effect of ADM on drug-resistant breast cancer cells was accelerated by 4-HBA through increasing the number of cells distributed in G2/M phase of cell cycle arrest. Inhibiting HIPK2/p53 pathway could abolish 4-HBA/ADM co-treatment-induced apoptosis and G2/M cell cycle arrest. Importantly, HDAC6 expressions were also significantly down-regulated in ADM-resistance breast cancer cells co-treated with ADM and 4-HBA. Additionally, 4-HBA clearly potentiated the anticancer role of ADM in the MCF-7 breast cancer animal model with low toxicity. Therefore, 4-HBA could be applied as an effective HDAC6 inhibitor to reverse human breast cancer resistance. Herein, the 4-HBA and ADM combination might represent as a useful therapeutic strategy to prevent human breast cancer.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2026

GRIDAPPSD/distopf (33583-E)

DistOPF is an open-source Python package providing a three-phase, asymmetric optimal power flow (OPF) tool specifically designed for distribution systems. The key inventive features include: - Asymmetrical 3-phase OPF modeling for distribution systems with unbalanced phases - Comprehensive control optimization supporting both active (P) and reactive (Q) power control variables - Built-in visualization and validation tools - Standard test system benchmarking platform for algorithm development and comparison - Modular CSV-based input system using Pandas DataFrames for flexible model specification - Standard power distribution model importer enabling direct conversion from CIM and OpenDSS format to optimization-ready models - Multiple solve interface compatibility (PYOMO, CVXPY, SciPy) with automatic solver selection based on problem type

Gray, Nathan [Pacific Northwest National Laborator↗

DOE OSTI2013

Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ″-strengthened nickel-base superalloys

Dissimilar welding of γ′- and γ″-strengthened nickel-base superalloys has been investigated to identify the relationship between the microstructure of the welds and the resultant mechanical and weldability characteristics. γ′-Strengthened nickel-base Alloy 500 and γ″-strengthened nickel-base Alloy 718 were used for dissimilar welding. Gas tungsten arc welding operations were utilized for performing the autogenous dissimilar welding. Alloy 500 and Alloy 718 base metals showed various types of phases, carbides, intermetallics and eutectics in their microstructure. The results for Alloy 500 weld metal showed severe segregation of titanium to the interdendritic regions. The Alloy 718 weld metal compositional analysis confirmed the substantial role of Nb in the formation of low-melting eutectic-type morphologies which can reduce the weldability. The microstructure of dissimilar weld metal with dilution level of 65% wt.% displayed semi-developed dendritic structure. The less segregation and less formation of low-melting eutectic structures caused to less susceptibility of the dissimilar weld metal to the solidification cracking. This result was confirmed by analytic modeling achievements. Dissolution of γ″-Ni{sub 3}Nb precipitations took place in the Alloy 718 heat-affected zone leading to sharp decline of the microhardness in this region. Remelted and resolidified regions were observed in the partially-melted zone of Alloy 500 and Alloy 718. Nevertheless, no solidification and liquation cracking happened in the dissimilar welds. Finally, this was concluded that dissimilar welding of γ′- and γ″-strengthened nickel-base superalloys can successfully be performed. - Highlights: • Dissimilar welding of γ′- and γ″-strengthened nickel-base superalloys is studied. • Microstructural, mechanical and weldability aspects of the welds are assessed. • Microstructure of welds, bases and heat-affected zones is characterized in detail. • The type, morphology and distribution of the phases are thoroughly investigated. • Dissimilar welding is successfully performed without occurrence of any hot cracks.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Correlation function distributions for O ( N ) lattice field theories in the disordered phase

Numerical computations in strongly interacting quantum field theories are often performed using Monte Carlo sampling methods. A key task in these calculations is to estimate the value of a given physical quantity from the distribution of stochastic samples that are generated using the Monte Carlo method. Typically, the sample mean and sample variance are used to define the expectation values and uncertainties of computed quantities. However, the Monte Carlo sample distribution contains more information than these basic properties, and it is useful to investigate it more generally. In this work, the exact form of the probability distributions of two-point correlation functions at zero momentum in O ( N ) lattice field theories in the disordered phase and in infinite volume are determined. These distributions allow for a robust investigation of the efficacy of the Monte Carlo sampling procedure and are shown also to allow for improved estimators of the target physical quantity to be constructed. The theoretical expectations are shown to agree with numerical calculations in the O ( 2 ) model. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2018

Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process

A novel design and manufacturing method, dubbed “precast,” of the cooling system and tools for a hot forming process was proposed in this paper. The integrated structures of the punch and blank holder were determined by analyzing the bending and reverse-bending deformation of the forming parts. The desired crashworthiness performance of an automotive front bumper constructed with this process was obtained by a tailored phase transformation, which generated martensite-bainite in the middle and full martensite transformation in the corner areas. Varying cooling effects in the formed parts caused the highest temperature to be located in the bottom and the lowest on the end of the formed parts. Moreover, the microstructural distributions demonstrated that the bottom possessed a relatively lower content of martensite, while, conversely, the end possessed a higher content. This was precisely the most desired phase distributions for the hot formed parts. For the six-process cycle stamping, the temperatures reached a stable status after an initial rapid increase in the first three process cycles. The microstructural results verified the feasibility of the hot forming tools under multiprocess cycles.

36 MATERIALS SCIENCE↗

DOE OSTI2018

A Sulfoxide-Based Isobaric Labelling Reagent for Accurate Quantitative Mass Spectrometry

Modern proteomics requires reagents for exact quantification of peptides in complex mixtures. Peptide labelling is most typically achieved with isobaric tags that consist of a balancer and a reporter part that separate in the gas phase. An ingenious distribution of stable isotopes offers multiple reagents with identical molecular weight but a different mass of the reporter groups, allowing relative quantification of multiple samples in one measurement. In this work, we discuss a new isobaric labelling reagent, where the balancer and the reporter are linked by a sulfoxide group, which, based on the sulfoxide pyrolysis, leads to easy and asymmetric cleavage at low fragmentation energy. The fragmentation of our new design is significantly improved, yielding more intense complementary ion signals, allowing complementary ion cluster analysis as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Fractionating and Purifying Softwood Kraft Lignin with Aqueous Renewable Solvents: Liquid–Liquid Equilibrium for the Lignin–Ethanol–Water System

Hot ethanol–water solutions can be used to simultaneously fractionate and purify softwood Kraft lignin through the Aqueous Lignin Purification with Hot Agents (ALPHA) process, using the regions of liquid–liquid equilibrium (LLE) that form at selected temperatures and solvent-to-lignin feed (S/F) ratios. Lignin, ethanol, and water compositions are measured for the solvent-rich (SR) and lignin-rich (LR) liquid phases in mutual equilibrium, as well as the lignin and metals mass distributions between the two phases. As depicted in quasi-ternary diagrams for clarity, both temperature and S/F ratio can be used to grow, merge, and even split the regions of LLE, giving significant control over both molecular weight (MW) and lignin purity. For example, a solvent comprising 45:55 EtOH/H 2 O at 75 °C and an S/F ratio of 6:1 enables recovery of an ultrapure (95 % of Na removed), higher MW (M n =8400 Da) lignin fraction in the LR phase. On the other hand, 95:5 EtOH/H 2 O at 45 °C and S/F=3:1 enables recovery of an ultrapure, low MW (1500 Da) lignin in the SR phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Finding wombling boundaries in LHC data with Voronoi and Delaunay tessellations

We address the problem of finding a wombling boundary in point data generated by a general Poisson point process, a specific example of which is an LHC event sample distributed in the phase space of a final state signature, with the wombling boundary created by some new physics. We discuss the use of Voronoi and Delaunay tessellations of the point data for estimating the local gradients and investigate methods for sharpening the boundaries by reducing the statistical noise. The outcome from traditional wombling algorithms is a set of boundary cell candidates with relatively large gradients, whose spatial properties must then be scrutinized in order to construct the boundary and evaluate its significance. Here we propose an alternative approach where we simultaneously form and evaluate the significance of all possible boundaries in terms of the total gradient flux. We illustrate our method with several toy examples of both straight and curved boundaries with varying amounts of signal present in the data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2013

Multiphase Resistivity Model for Magnetic Nanocomposites Developed for High Frequency, High Power Transformation

New power conversion systems that offer promise to transform electricity grids into unified interactive supply networks require high-resistivity soft-magnetic materials to allow for switching of magnetic materials at frequencies approaching 100 kHz for power transformation in the megawatt range. Amorphous and nanocomposite soft-magnetic materials, which represent the state of the art in terms of high power densities and low losses at high frequencies, have resistivities that depend on the structures and spatial distributions of multiple phases in thin ribbons. We present a multiphase resistivity model applicable to nanocomposite materials by considering an equivalent circuit approach considering paths through an amorphous, crystalline, and growth inhibitor shell phase. We detail: (a) identification of amorphous, crystalline, and shell phases; (b) consideration of the role of the morphology of each phase in an equivalent circuit model for the resistance; (c) a two-band model for the Fe/Co composition dependence of the resistivity in crystalline and amorphous phases; (d) a virtual bound state model for resistivity to explain increased resistivity due to early transition-metal growth inhibitors in the shell surrounding the nanocrystalline phase; and (e) disorder effects on amorphous phase resistivity. Experimental design and results for systems of interest in high-frequency power transformation are discussed in the context of our model including: (a) techniques for measurements of cross-section and density, (b) four-point probe and surface resistivity measurements, and (c) measurements in Fe- and Co-rich systems comparing amorphous and nanocomposite materials.

DeGeorge, V↗

DOE OSTI2019

The Effect of Chemical Composition and Processing Technology on the Microstructure, Texture and Earing Behavior of DR Tinplate

The influence of alloying elements and processing technology on the microstructure, crystallographic texture and earing propensity has been investigated in two kinds of DR tinplate differing in Ti content: steel A, no Ti addition, and steel B 0.015% added. The cementite distribution, second-phase particles and the content of dissolved carbon and nitrogen atoms were obtained by SEM, TEM and XPS, respectively. Since the two steels develop both a partial 〈110〉//RD fiber and a {111}//ND fiber, the relative intensities of the several vital texture components seem to differ visibly. There are three types of strengthening mechanisms involved here: strengthening by grain size reduction, solution strengthening and strain hardening. That the tensile strength of steel B is greater than A implies the third mode plays a dominant role in the strength increasing for the DR tinplate. The crystallographic texture of materials not only results in a “preferential orientation” of the mechanical property, but also takes the primary responsibility for ears forming during drawing. Increasing the second cold-rolled reduction is not favorable to reduce the ear height, but this situation seems to be ameliorable. The average ears height of steel B is smaller than that of A, which demonstrated a low level of solute atoms and an ideal texture characteristic before deformation could alleviate the adverse effect caused by an elevated second cold reduction.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Influence of Thermal Treatment on the Microstructure, Mechanical Properties, and Corrosion Resistance of Newly Developed Ti20Nb13Zr Biomedical Alloy in a Simulated Body Environment

The effect of thermal treatments on the microstructure, hardness, and electrochemical performance in a simulated body fluid were studied for the newly developed (β + α) Ti20Nb13Zr alloy (TNZ) for biomedical applications. The alloy was heat-treated for 1 h at 900 °C and then cooled at different cooling rates. Then, the solution-treated samples were aged at 400, 500, or 600 °C for 5 h. The phase evolution and microstructure of the treated alloy were examined using XRD and SEM/EDX analysis. The mechanical properties were assessed using microindentation. The surface protection performance against corrosion was assessed by potentiodynamic polarization and electrochemical impedance spectroscopic analysis. The obtained results showed that the wide range of microstructure with varied volume fraction and morphology of β and α were obtained with different heat treatment conditions. The different phases’ sizes and distributions influenced the microstructure obtained during the heat treatment, thereby affecting the mechanical properties. The corrosion performance significantly altered with variations in the microstructure of the TNZ alloy as a result of the different thermal treatments. The heat treatment of TNZ conferred enhanced combination of mechanical and corrosion protection compared to that of the commercial Ti6Al4V alloy.

36 MATERIALS SCIENCE↗

DOE OSTI2018

MFAP5 suppression inhibits migration/invasion, regulates cell cycle and induces apoptosis via promoting ROS production in cervical cancer

Highlights: • Suppression of MFAP5 reduces migration/invasion, regulates cell cycle and induces apoptosis in cervical cancer cells. • Inhibition of MFAP5 promotes ROS generation to prevent cervical cancer progression in vitro. • MFAP5 down-regulation inhibits cervical cancer growth in vivo. Cervical cancer is one of the most lethal types of cancer among female. Microfibrillar-associated protein 5 (MFAP5) is an extracellular matrix (ECM) glycoprotein, and is confirmed to be involved in cell signaling during microfibril assembly, elastinogenesis and cell survival. However, the role of MFAP5 in cervical cancer development and progression remains poorly understood. In the study, MFAP5 was over-expressed in human cervical cancers, and in different cervical cancer cell lines. Patients suffering from cervical cancer with low MFAP5 expression exhibited better survival rate. Suppressing MFAP5 in cervical cancer cells markedly reduced the cell proliferation, migration and invasion by modulating epithelial-mesenchymal transition (EMT)-related signaling pathway. In addition, MFAP5 knockdown induced large number of cells distributed in G2/M phase, along with reduced Cyclin B1, Cyclin D1 and cyclin-dependent kinase 4 (CDK4) expressions, and enhanced p21 and p53 levels. Moreover, apoptosis was highly induced by MFAP5 silence through reducing Bcl-xl and Bcl-2 expressions, and promoting Bax, cleaved Caspase-3 and poly (ADP-Ribose) polymerase (PARP) expressions in cervical cancer cells. Reactive oxygen species (ROS) production levels were also higher in MFAP5-knockdown cells, along with Jun-N-terminal kinase (JNK) activation. Importantly, we found that MFAP5 knockdown-inhibited cervical cancer cell growth was dependent on ROS production. Finally, the depletion of MFAP5 prevented cervical cancer progression in vivo. In summary, our study identified a critical role played by MFAP5 in the progression of cervical cancer and the potential mechanisms by which exerted its effects, indicating that targeting MFAP5-related pathways could be conducive to the therapies for cervical cancer.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Multi deep learning-based stochastic microstructure reconstruction and high-fidelity micromechanics simulation of time-dependent ceramic matrix composite response

A multi deep learning-based framework is developed for efficient, automated microstructure reconstruction and generation of stochastic representative volume elements (SRVEs) with periodic boundary conditions (PBCs) for accurate modeling of ceramic matrix composite (CMC) response. The methodology comprises a convolutional neural network coupled with regression layers to act as a vanilla regression network for semantic segmentation of the microstructure, allowing accurate characterization of the phases and their distributions at the microscale. Scanning electron microscope and confocal microscope are used to obtain C/SiNC and SiC/SiNC CMCs micrographs for vanilla regression testing. Microstructure variability in terms of fiber volume fraction and porosity are quantified through the output regression layer, ensuring accurate representation of material variability in SRVE construction. Generative adversarial network (GAN) and its variants are designed to produce high-fidelity SRVE, spanning CMCs microstructure variability space. A circular padding algorithm is developed to generate SRVEs with PBCs during training of GANs. The accuracy of the generated SRVEs is established through micromechanics simulations, where an efficient formulation of the high-fidelity generalized methods of cells (HFGMC) approach is used to compute the effective mechanical properties. Furthermore, an iterative algorithm is implemented in the HFGMC solver to simulate time-dependent deformation of SiC/SiNC subjected to creep loading conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Multidisciplinary benchmarks of a conservative spectral solver for the nonlinear Boltzmann equation

The Boltzmann equation describes the evolution of the phase-space probability distribution of classical particles under binary collisions. Approximations to it underlie the basis for several scholarly fields, including aerodynamics and plasma physics. While these approximations are appropriate in their respective domains, they can be violated in niche but diverse applications which require direct numerical solution of the original nonlinear Boltzmann equation. An expanded implementation of the Galerkin–Petrov conservative spectral algorithm is employed to study a wide variety of physical problems. Enabled by distributed precomputation, solutions of the spatially homogeneous Boltzmann equation can be achieved in seconds on modern personal hardware, while spatially-inhomogeneous problems are solvable in minutes. Here, several benchmarks are presented focusing on accuracy compared to both analytic theoretical predictions and other Boltzmann solvers. These benchmarks span several physical domains including weakly ionized plasma, gaseous fluids, and atomic-plasma interaction.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2018

Tensile mechanical properties and fracture behaviors of nickel-based superalloy 718 in the presence of hydrogen

Hydrogen embrittlement of a nickel-based superalloy IN718 was investigated using slow strain rate tensile tests. Post-mortem observation of fractured samples was performed to explore hydrogen-assisted failure mechanisms of the alloy. The results reveal that hydrogen charging reduces yield strength, tensile strength, fracture strain and work hardening rate. With increasing current density, yield strength and tensile strength reduce linearly and fracture strain decreases exponentially. Furthermore, the crack initiation and propagation in hydrogen-charged region depends on the distribution of δ phase in the alloy. For needle-shaped δ phase within the grains, the nucleation of voids takes place at the intersections between dislocation slip bands and δ phase due to the hydrogen-enhanced localized plasticity (HELP)-assisted shear localization and possible hydrogen agglomeration. For δ phase along the grain boundaries, the impingement of slip bands and local hydrogen accumulation at γ-matrix/δ phase interfaces as well as hydrogen-enhanced decohesion (HEDE)-assisted decohesion lead to the void nucleation at the interfaces. Because of the decoration of δ phase at the grain boundaries, hydrogen-assisted cracking preferentially propagates along the grain boundaries. It is therefore suggested that the synergistic interplay of HELP mechanism and HEDE mechanism can be used to explain the embrittlement of the alloy.

08 HYDROGEN↗

DOE OSTI2021

High speed manufacturing of aluminum alloy 7075 tubing by Shear Assisted Processing and Extrusion (ShAPE)

Shear assisted processing and extrusion (ShAPE) was used to extrude aluminum alloy 7075 tubing at speeds up to 12.2 m/min. This is in comparison to 2.0 m/min which is generally the limit for conventionally extruded 7075. The increased speed is primarily attributed to more extensive shear deformation, compared to conventional extrusion, which results in a high density of low angle grain boundaries that facilitate continued deformation and delay the onset of surface tearing. Mechanical testing after heat treating to the T6 condition gave an ultimate tensile strength of 565.3 ± 4.6 MPa, yield strength of 495.7 ± 8.7 MPa, and elongation of 16.8 ± 0.8%. Strength values exceed the ASTM minimum standard and are on par with ASM typical values, while elongation was substantially improved compared to 7 and 11% for the ASTM and ASM values respectively. Finally, it was observed that low temperature extrusion at 341 °C and 40 rpm gave superior material properties in the T6 condition compared to high temperature extrusion at 441 °C and 120 rpm due to variances in nanoscale second phase size and distribution.

36 MATERIALS SCIENCE↗