Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

An evaluation of the Johnson-Cook model to simulate puncture of 7075 aluminum plates.

The objective of this project was to evaluate the use of the Johnson-Cook strength and failure models in an adiabatic finite element model to simulate the puncture of 7075- T651 aluminum plates that were studied as part of an ASC L2 milestone by Corona et al (2012). The Johnson-Cook model parameters were determined from material test data. The results show a marked improvement, in particular in the calculated threshold velocity between no puncture and puncture, over those obtained in 2012. The threshold velocity calculated using a baseline model is just 4% higher than the mean value determined from experiment, in contrast to 60% in the 2012 predictions. Sensitivity studies showed that the threshold velocity predictions were improved by calibrating the relations between the equivalent plastic strain at failure and stress triaxiality, strain rate and temperature, as well as by the inclusion of adiabatic heating.

Corona, Edmundo↗

Using Direct Metal Deposition to Fabricate Mold Plates for an Injection Mold Machine Allowing for the Evaluation of Cost Effective Near-Sourcing Opportunities in Larger, High Volume Consumer Products

ORNL collaborated with Radio Systems Corporation to investigate additive manufacturing (AM) of mold plates for plastic injection molding by direct metal deposition. The team s modelling effort identified a 100% improvement in heat transfer through use of conformal cooling lines that could be built into the mold using a revolutionary design enabled by additive manufacturing. Using the newly installed laser deposition system at the ORNL Manufacturing Demonstration Facility (MDF) a stainless steel mold core was printed.

36 MATERIALS SCIENCE↗

Extended Plate and Beam Wall System: Concept Investigation and Initial Evaluation

A new and innovative High-R wall design, referred to as the Extended Plate & Beam (EP&B), is under development. The EP&B system uniquely integrates foam sheathing insulation with wall framing such that wood structural panels are installed exterior of the foam sheathing, enabling the use of standard practices for installation of drainage plane, windows and doors, claddings, cavity insulation, and the standard exterior foam sheathing installation approach prone to damage of the foam during transportation of prefabricated wall panels. As part of the ongoing work, the EP&B wall system concept has undergone structural verification testing and has been positively vetted by a group of industry stakeholders. Having passed these initial milestone markers, the advanced wall system design has been analyzed to assess cost implications relative to other advanced wall systems, undergone design assessment to develop construction details, and has been evaluated to develop representative prescriptive requirements for the building code. This report summarizes the assessment steps conducted to-date and provides details of the concept development.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advanced Extended Plate and Beam Wall System in a Cold-Climate House

This report presents the design and evaluation of an innovative wall system. This highly insulated (high-R) light-frame wall system for use above grade in residential buildings is referred to as Extended Plate & Beam (EP&B). The EP&B design is the first of its kind to be featured in a new construction test house (NCTH) for the DOE Building America program. The EP&B wall design integrates standard building methods and common building products to construct a high-R wall that minimizes transition risks and costs to builders.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

C1-continuous Virtual Element Method for Poisson-Kirchhoff plate problem

We present a family of C1-continuous high-order Virtual Element Methods for Poisson-Kirchho plate bending problem. The convergence of the methods is tested on a variety of meshes including rectangular, quadrilateral, and meshes obtained by edge removal (i.e. highly irregular meshes). The convergence rates are presented for all of these tests.

97 MATHEMATICS AND COMPUTING↗

Skin Effect Simulation for Area 11 Dense Plasma Focus Hot Plate

Two arc flashover events occurred at the DPF Area 11 facility. These flashover events happened in the same location on the bank current delivery plates. The damage from one of these events can be seen on the left-hand side of Figure 1. Since the flashovers occurred in the same area of the bank, and the reliability of the bank is important for future DPF experiments, a failure analysis effort was initiated. Part of this failure analysis effort was an effort to understand the physical reasons behind why the flashover happened, and why it happened in the same place twice. This paper summarizes an effort to simulate the current flow in the bank in order to understand the reasons for the flashover.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ELROI Extremely Low Resource Optical Identifier. A license plate for your satellite, and more.

ELROI (Extremely Low Resource Optical Identifier) is a license plate for your satellite; a small tag that flashes an optical identification code that can be read by a small telescope on the ground. The final version of the tag will be the size of a thick postage stamp and fully autonomous: you can attach it to everything that goes into space, including small cubesats and inert debris like rocket stages, and it will keep blinking even after the satellite is shut down, reliably identifying the object from launch until re-entry.

47 OTHER INSTRUMENTATION↗

Extended Plate and Beam Wall System

Home Innovation Research Labs studied the extended plate and beam wall (EP&B) system during a two-year period from mid-2015 to mid-2017 to determine the wall’s structural performance, moisture durability, constructability, and cost effectiveness for use as a high-R enclosure system for energy code minimum and above-code performance in climate zones 4–8.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Characterization of Oxyhydroxides on a Dry-Stored Fuel Plate From L-Basin

This report describes the characterization of oxyhydroxide (oxide) films on a fuel plate that was previously irradiated in an RU-1 pool type reactor in Uruguay and subsequently stored in vented dry storage, first in Uruguay and most recently in L-Area on the Savannah River Site. Characterization of the as-received oxides includes the oxide morphology, thickness, structure, and chemical composition. The results from this work will, in a future report, be compared to characterizations of oxide films grown on alloys in the laboratory under prototypic conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Light Initiated High Explosive Driven Flyer Plate Impulse Generation Technique For Material and Structural Response

The objective for this research has been to develop a method to induce a high frequency, large amplitude shock pulse into materials and structures as an above-ground laboratory simulation of an exo-atmospheric cold x-ray induced blow-off event. This work builds on the successes of direct-spray Light Initiated High Explosive impulse delivery technique, in order to drive a flyer to a desired impact velocity to induce the proper combined material and structural response of the target. The reported development focuses on flyer velocity from explosive initiation to target impact to flyer rebound. A comprehensive derivation of an analytical model to predict flyer velocity as a function of explosive deposition and flyer properties is presented. One-and two-dimensional test series were conducted to evaluate impulse delivery and impact pressure, as well as target material and structural response. Experimental results show good agreement in flyer velocity between that predicted by the developed theory and that inferred by impulse delivery. A definitive material response was measured in each of the one-dimensional targets. The structural strain response measured in the ring experiments showed excellent agreement with both the predicted flyer performance and the analytical strain solution for a cosine distributed impulsive loading. This work has focused on the utilization of analytical, hydrocode, and test analysis to confirm that a LIHE driven flyer impulse technique can be an effective simulation of a cold x-ray blow-off event. It is shown that a thin metallic flyer plate can be explosively accelerated to impact a target with sufficient energy to generate an impulsive load which induces both structural and material response in a test item.

36 MATERIALS SCIENCE↗

Experimental Measurements Summary for Thermal/Epithermal eXperiments (TEX) with ZPPR Plutonium/Aluminum Plates with Polyethylene and Tantalum

This report documents the experimental critical configurations for IER-184, Thermal/Epithermal eXperiments (TEX), using plutonium ZPPR plates moderated by polyethylene with and without a tantalum diluent. The experiments were completed in multiple campaigns over 2017 and 2018 at the National Critical Experiments Research Center (NCERC) at the Nevada National Security Site (NNSS).

36 MATERIALS SCIENCE↗

Characterization of Distributed Phase Plates for use on Z-Beamlet

Distributed Phase Plates (DPP) are used in laser experiments to create homogenous intensity distributions of a distinct shape at the location of the laser focus. Such focal shaping helps with controlling the intensity that is impeding on the target. To efficiently use a DPP, the exact size and shape of the focal distribution is of critical importance. We recorded direct images of the focal distribution with ideal continuous-wave (CW) alignment lasers and with laser pulses delivered by the Z-Beamlet facility. As necessary to protect the imaging sensors, laser pulses will not be performed by full system shots, but rather with limited energy on so-called 'rod-shots', in which Z-Beamlet's main amplifiers do not engage. The images are subsequently analyzed for characteristic radii and shape. All characterizations were performed at the Pecos target area of Sandia with a lens of 3.2 m focal length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of Phenolic Groups in Bio-Oils Using Revised Folin-Ciocalteu Methods: Single Cuvette and Plate Reader. Laboratory Analytical Procedure (LAP), Issue Date: May 12, 2022

Phenol components are ubiquitous in wood-derived bio-oils and biocrudes. Their reaction with other functional groups (e.g., aldehydes) may contribute to the formation of carbonaceous species and the expected thermal instability of pyrolysis oils. During hydrotreating, phenols can be recalcitrant species, requiring higher reaction temperatures than other oxygen-containing functional groups. Phenols are also present in upgraded products and have been shown to lead to catalyst deactivation during hydrotreating. They also are the first oxygenated functional group to re-appear in the upgraded product, signaling catalyst deactivation. This procedure covers the determination of phenolic compounds in fast pyrolysis oils. This Laboratory Analytical Procedure (LAP) includes two methods, the first allowing for shorter analysis time at increased reaction temperature, while the second employs a longer analysis time but at room temperature. Additionally, the use of both a single cuvette and of a plate reader are also presented.

09 BIOMASS FUELS↗