Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

The Operating Principle of a Fully Solid State Active Magnetic Regenerator

As an alternative refrigeration technology, magnetocaloric refrigeration has the potential to be safer, quieter, more efficient, and more environmentally friendly than the conventional vapor compression refrigeration technology. Most of the reported active magnetic regenerator (AMR) systems that operate based on the magnetocaloric effect use heat transfer fluid to exchange heat, which results in complicated mechanical subsystems and components such as rotating valves and hydraulic pumps. This paper presents an operating principle of a fully solid state AMR, in which an alternative mechanism for heat transfer between the AMR and the heat source/sink is proposed. The operating principle of the fully solid state AMR is based on moving rods/sheets (e.g. copper, brass, iron or aluminum), which are employed to replace the heat transfer fluid. Such fully solid state AMR would provide a significantly higher heat transfer rate than a conventional AMR because the conductivity of moving solid rods/plates is high and it enables the increase in the machine operating frequency hence the cooling capacity. The details of operating principle are presented and discussed here. One of the key enabling features for this technology is the contact between the moving rods/sheets and magnetocaloric material, and heat exchange mechanism at the heat source/sink. This paper provides an overview of the design for a fully solid state magnetocaloric refrigeration system along with guidelines for their optimal design.

Abdelaziz, Omar↗

Preliminary Concept of Operations for the Spent Fuel Management System--WM2017

The Nuclear Fuels Storage and Transportation Planning Project (NFST) within the U.S. Department of Energy s Office of Nuclear Energy is tasked with identifying, planning, and conducting activities to lay the groundwork for developing interim storage and transportation capabilities in support of an integrated waste management system. The system will provide interim storage for commercial spent nuclear fuel (SNF) from reactor sites and deliver it to a repository. The system will also include multiple subsystems, potentially including; one or more interim storage facilities (ISF); one or more repositories; facilities to package and/or repackage SNF; and transportation systems. The project team is analyzing options for an integrated waste management system. To support analysis, the project team has developed a Concept of Operations document that describes both the potential integrated system and inter-dependencies between system components. The goal of this work is to aid systems analysts in the development of consistent models across the project, which involves multiple investigators. The Concept of Operations document will be updated periodically as new developments emerge. At a high level, SNF is expected to travel from reactors to a repository. SNF is first unloaded from reactors and placed in spent fuel pools for wet storage at utility sites. After the SNF has cooled enough to satisfy loading limits, it is placed in a container at reactor sites for storage and/or transportation. After transportation requirements are met, the SNF is transported to an ISF to store the SNF until a repository is developed or directly to a repository if available. While the high level operation of the system is straightforward, analysts must evaluate numerous alternative options. Alternative options include the number of ISFs (if any), ISF design, the stage at which SNF repackaging occurs (if any), repackaging technology, the types of containers used, repository design, component sizing, and timing of events. These alternative options arise due to technological, economic, or policy considerations. As new developments regularly emerge, the operational concepts will be periodically updated. This paper gives an overview of the different potential alternatives identified in the Concept of Operations document at a conceptual level.

Cumberland, Riley M↗

Store operations to maintain cache coherence

In one embodiment, a computer-implemented method includes encountering a store operation during a compile-time of a program, where the store operation is applicable to a memory line. It is determined, by a computer processor, that no cache coherence action is necessary for the store operation. A store-without-coherence-action instruction is generated for the store operation, responsive to determining that no cache coherence action is necessary. The store-without-coherence-action instruction specifies that the store operation is to be performed without a cache coherence action, and cache coherence is maintained upon execution of the store-without-coherence-action instruction.

97 MATHEMATICS AND COMPUTING↗

Can We Practically Bring Physics-based Modeling Into Operational Analytics Tools?

We present that analytics software is increasingly used to improve and maintain operational efficiency in commercial buildings. Energy managers, owners, and operators are using a diversity of commercial offerings often referred to as Energy Information Systems, Fault Detection and Diagnostic (FDD) systems, or more broadly Energy Management and Information Systems, to cost-effectively enable savings on the order of ten to twenty percent. Most of these systems use data from meters and sensors, with rule-based and/or data-driven models to characterize system and building behavior. In contrast, physics-based modeling uses first-principles and engineering models (e.g., efficiency curves) to characterize system and building behavior. Historically, these physics-based approaches have been used in the design phase of the building life cycle or in retrofit analyses. Researchers have begun exploring the benefits of integrating physics-based models with operational data analytics tools, bridging the gap between design and operations. In this paper, we detail the development and operator use of a software tool that uses hybrid data-driven and physics-based approaches to cooling plant FDD and optimization. Specifically, we describe the system architecture, models, and FDD and optimization algorithms; advantages and disadvantages with respect to purely data-driven approaches; and practical implications for scaling and replicating these techniques. Finally, we conclude with an evaluation of the future potential for such tools and future research opportunities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Store operations to maintain cache coherence

In one embodiment, a computer-implemented method includes encountering a store operation during a compile-time of a program, where the store operation is applicable to a memory line. It is determined, by a computer processor, that no cache coherence action is necessary for the store operation. A store-without-coherence-action instruction is generated for the store operation, responsive to determining that no cache coherence action is necessary. The store-without-coherence-action instruction specifies that the store operation is to be performed without a cache coherence action, and cache coherence is maintained upon execution of the store-without-coherence-action instruction.

97 MATHEMATICS AND COMPUTING↗

Two-Year Operational Evaluation Of A Consumer Electronics-Based Data Acquisition System For Equipment Monitoring

Oak Ridge National Laboratory (ORNL) has performed a two-year evaluation of the performance of an in-house developed consumer electronics-based data acquisition system (DAS). The main advantage of this approach compared to conventional instrumentation grade systems is cost; instrument grade data acquisition systems average costs range from $800 to $2,000 per channel compared to a range of $200 - $400 per channel for a consumer electronics-based system. The DAS is operated as a full-time in-situ vibration monitor. The resulting data stream is streamed over the ORNL network, at an aggregate rate of approximately 2 megabytes/s, to a Linux server. The server includes the capability to implement event-triggered data stores, as well as real-time files for the implementation of continuous display monitoring of the spectra. Detailed spectral analysis is performed post event. The DAS is installed on a large industrial chiller and cooling water pump associated with ORNL’s Titan supercomputer. These mechanical systems include rotating components that operate at fundamental frequencies within the range of 30 Hz to over 3 KHz. Evaluation of the DAS data over a two-year operating period leads to the conclusion that for many industrial processes this system could form the basis for a cost effective means of obtaining operating health data in real time from rotating machinery. The deployment has also shown that the DAS technology is reliable. Furthermore, because the cost of the DAS is low, the other significant advantage of this approach is that the DAS can be deployed in a dedicated manner and operated on a full-time basis.

Wetherington Jr, G↗

Techniques for Achieving High Reliability Operation of the Spallation Neutron Source High Power Radio-Frequency System

The Spallation Neutron Source (SNS) high power radiofrequency (HPRF) system operates with high reliability to support the goals of the SNS user program. In recent operational periods the availability of the HPRF system has exceeded 97 percent while the neutron source availability overall is typically greater than 90 percent. SNS has a unique set of 92 HPRF stations that operate at either 402.5 MHz or 805 MHz with peak output power ranging from 550 kW to 5 MW and average power ranging from 49.5 kW to 450 kW. The HPRF transmitters consist of chassis-mounted power supplies, solid-state amplifiers and other equipment that support the operation of the klystrons that ultimately provide the RF power to the accelerating structures. Management of the operation and maintenance of the HPRF system has increasingly focused on reliability and sustainability in recent years. Techniques for klystron lifetime preservation and optimization of transmitter reliability have been developed and will be described.

Moss, John↗

Economically efficient operation of a power generator

A method of operating a power generator comprises receiving, a fault code corresponding to an operating condition of the power generator being outside of an acceptable range. A generator controller determines a cost of increased maintenance or repairing damage associated with overriding the fault code and maintaining existing power output from the power generator through the operating condition. A cost of a utility fine or contractual penalty associated with shutting down the power generator is determined in response to the fault code. The generator controller compares the cost of the utility fine or contractual penalty associated with shutting down the power generator with the cost of increased maintenance or damage repair to the power generator associated with overriding the fault code and maintaining existing power output through the operating condition. In response to the comparing, the fault code is overridden continuing operation of the power generator.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Method and apparatus of performing a memory operation in a hierarchical memory assembly

A method and apparatus of performing a memory operation includes receiving a memory operation request at a first memory controller that is in communication with a second memory controller. The first memory controller forwards the memory operation request to the second memory controller. Upon receipt of the memory operation request, the second memory controller provides first information or second information depending on a condition of a pseudo-bank of the second memory controller and a type of the memory operation request.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Downhole Sensors in Drilling Operations

Before downhole and surface equipment became mainstream, drillers had little way of knowing where they were or the conditions of the well. Eventually, breakthroughs in technology such as Measurement While Drilling (MWD) devices and the Electronic Drilling Recorder system allowed for more accurate and increased data collection. More modern initiatives that approach drilling as manufacturing such as Lean Drilling, Drilling the Limit, and revitalized Drilling the Limit programs have allowed petroleum drilling operations to become more efficient in the design and creation of a well, increasing rates of penetration by more than 50%. Unfortunately, temperature and cost limitations of these tools have prevented geothermal operations from using this state-of-the-art equipment in most wells. Today, petroleum drilling operations can collect surface measurements on key drilling data such as rotary torque, hook load (for surface weight on bit), rotary speed, block height (for rate of penetration), mud pressure, pit volume, and pump strokes (for flowrates). They also can collect downhole measurements of azimuth, inclination, temperature, pressure, revolutions per minute, downhole torque on bit, downhole weight on bit, downhole vibration, and bending moment using an MWD device (although not necessarily in real time). These data can be used to calculate and minimize mechanical specific energy, which is the energy input required to remove a unit volume of rock. In geothermal operations, these data are not always used due to poor accuracy or lack of equipment. This is one of the major hurdles for geothermal well construction and a reason why geothermal drilling operations take much longer than their petroleum counterparts. This paper reviews the surface and downhole data collection equipment used in the petroleum industry and its associated costs, capabilities, limitations, and impacts. The impact these downhole tools and measurements have had on increasing drilling efficiency for the petroleum industry suggests that developing these tools for high-temperature, high-pressure environments could be similarly impactful for the geothermal industry.

15 GEOTHERMAL ENERGY↗

URANIUM ACCUMULATIONS IN CASTING OPERATIONS

In December 2017, unexpected accumulations of uranium were discovered in several locations throughout the casting process area at the Y-12 National Security Complex that subsequently placed casting operations on hold. The Y-12 uranium casting process takes place in enclosures and hoods, many of which are open to a large floor surface area that has limited visibility and access. At the time of discovery, there were no Nuclear Criticality Safety (NCS) analyses or limits for material accumulations in the casting processing areas. Due to changes in the operation of the casting process and invalid assumptions in the criticality safety evaluation, significant material accumulations were occurring inside the enclosures. The material accumulations were identified as a result of an extent of condition review from another process, and an occurrence report was filed. The NCS organization worked with Production and Operations personnel to identify additional areas of uranium accumulation in the casting area, which resulted in several iterations of cleaning and material collection. Following material recovery, a causal analysis was performed that identified several contributing factors that allowed the accumulations to go unnoticed. In order to resume operations, the criticality safety evaluation was revised to analyze and control uranium accumulations in the casting area. Additionally, improvements in nuclear material control and accountability (NMC&A) controls were required. Casting operations have since resumed with frequently required material collections, which have limited the amount of uranium material accumulation.

42 ENGINEERING↗

URANIUM ACCUMULATIONS IN CASTING OPERATIONS

In December 2017, unexpected accumulations of uranium were discovered in several locations throughout the casting process area at the Y-12 National Security Complex that subsequently placed casting operations on hold. The Y-12 uranium casting process takes place in enclosures and hoods, many of which are open to a large floor surface area that has limited visibility and access. At the time of discovery, there were no Nuclear Criticality Safety (NCS) analyses or limits for material accumulations in the casting processing areas. Due to changes in the operation of the casting process and invalid assumptions in the criticality safety evaluation, significant material accumulations were occurring inside the enclosures. The material accumulations were identified as a result of an extent of condition review from another process, and an occurrence report was filed. The NCS organization worked with Production and Operations personnel to identify additional areas of uranium accumulation in the casting area, which resulted in several iterations of cleaning and material collection. Following material recovery, a causal analysis was performed that identified several contributing factors that allowed the accumulations to go unnoticed. In order to resume operations, the criticality safety evaluation was revised to analyze and control uranium accumulations in the casting area. Additionally, improvements in nuclear material control and accountability (NMC&A) controls were required. Casting operations have since resumed with frequently required material collections, which have limited the amount of uranium material accumulation.

61 RADIATION PROTECTION AND DOSIMETRY↗

Setting operating points for circuits in an integrated circuit chip using an integrated voltage regulator power loss model

An apparatus includes an integrated circuit chip with a set of circuits having two or more subsets of circuits; an external voltage regulator separate from the integrated circuit chip; two or more integrated voltage regulators on the integrated circuit chip that each provide an input voltage to a respective subset of the circuits; and a controller. The controller determines, using an integrated voltage regulator power loss model, an electrical power loss for the integrated voltage regulators for a first combination of operating points for the subsets of the circuits. The controller then determines, based on the electrical power loss, a second combination of operating points for the subsets of the circuits that includes an adjustment to an operating point for at least one of the subsets of the circuits that compensates for an electrical power loss of the corresponding integrated voltage regulator. The controller sets an operating point of each of the subsets of the circuits based on the second combination of operating points.

42 ENGINEERING↗

Scalable filesystem enumeration and metadata operations

Systems, apparatus, and methods are disclosed for performing scalable operations in a file system, including POSIX-like file systems. Metadata entries in a namespace or directory tree are sharded across multiple file metadata servers. An enumeration operation, such as listing a directory, is parallelized across the multiple file metadata servers, while retaining standard functionality transparently to clients. Other enumeration operations include no-output operations such as changing file attributes or deleting a file, and cumulative operations such as counting total disk space usage. The parallelization is compatible with tree-level parallelization and storage-level parallelization. Disclosed technologies can be applied to other fields requiring scalable enumeration, such as database and network applications.

Grider, Gary A.↗

Effect of fuel injection scheme on rotating detonation engine operation

In this work, we experimentally in- vestigate the operation and performance characteristics of a rotating detonation engine (RDE) operated with different fuel injection schemes and operating conditions. In particular, we investigate the detonation and operation characteristics produced with an axial flow injector con- figuration and semi-impinging injector configurations. These are com- pared to the characteristics produced with a canonical radial injection system (AFRL injector). Each type produces a different flowfield and mixture distribution, leading to a different detonation initiation, injector dynamic response, and combustor pressure rise. By using a combination of diagnostics, we quantify the pressure loses and gains in the system, the ability to maintain detonation over a range of operating points, and the coupling between the detonation and the air/fuel feed lines. We par- ticularly focus on how this coupling affects both the stability and the performance of the detonation wave.

Chacon, Fabian↗

Koopman Operator Methods for Global Phase Space Exploration of Equivariant Dynamical Systems

In this paper, we develop the Koopman operator theory for dynamical systems with symmetry. In particular, we investigate how the Koopman operator and eigenfunctions behave under the action of the symmetry group of the underlying dynamical system. Further, exploring the underlying symmetry, we propose an algorithm to construct a global Koopman operator from local Koopman operators. In particular, we show, by exploiting the symmetry, data from all the invariant sets are not required for constructing the global Koopman operator; that is, local knowledge of the system is enough to infer the global dynamics.

Sinha, Subhrajit↗

Controlled Pyroshock Transients Can Be Used To Better Match Operational Shock Transients and Improve Shock Analysis and Testing

SRS analysis and testing to SRS is known to be conservative since SRS is generated from maxi-max shock transient data, maximum peaks are assumed to occur for each mode simultaneously, and the structural dynamics are not accounted for between the shock source and the test article. Knowing the structural dynamics of a shock test setup it is possible to subscribe a force shock transient applied at a particular strike location and direction to achieve a desired shock transient at a test reference accelerometer. The SRS at this test accelerometer reference location can be used to compare to the reference SRS, but the key reference is the shock transient not the SRS, which should lead to more realistic shock testing that better matches operational shock transient data and reduces artificial test failures that don’t occur in operational usage. The desired test shock transient should match operational shock transients. As such, the test shock transient should look similar to the operational shock transient and have similar positive and negative peaks, the same shape, and the same duration. Many shock transients can be created that satisfy an SRS, but better control of these shock transient parameters is needed to better match operational shock transients so that more realistic and less conservative shock testing can be performed. Three different shock transients are presented that satisfy a given SRS and the results are compared for an electronic board (test article) attached to a circular shock resonance test plate.

SRS, shock transient, frequency domain, FRF↗

Scalable augmented enumeration and metadata operations for large filesystems

Systems, apparatus, and methods are disclosed for performing scalable operations in a file system. Metadata entries in a namespace or directory tree are sharded across multiple file metadata servers. An augmented enumeration operation, such as listing a directory, is parallelized across the multiple file metadata servers, transparently to clients. Exemplary augmentation features can include filtering and sorting. Augmentation features can be executed concurrently with enumeration, prior to enumeration, after enumeration, or as a combination of these, and can utilize pre-built index structures or holding structures for intermediate results. Augmented enumeration operations can also include no-output operations such as changing file attributes or deleting a file, and cumulative operations such as counting total disk space usage. The parallelization is compatible with tree-level parallelization and storage-level parallelization. Disclosed technologies can be applied to other fields requiring scalable enumeration, such as database and network applications.

Grider, Gary A.↗