SEARCH · Engineering Papers

Results for “OILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Innovations in Upstream Oil and Gas Operations in Close Proximity to Communities

This paper reviews how oil and gas (O&G) can be extracted with less disruption to local populations, often for a lower cost, for operations in close proximity to city and suburban areas and other high population density communities. This work presents innovative practices from industry companies that the Joint Institute for Strategic Energy Analysis (JISEA) has engaged over several months, using several focus group meetings, and a comprehensive review of one mid-sized producer (Extraction Oil & Gas, Inc.).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2019

Subtask 1.1 – Advanced Characterization of Unconventional Oil and Gas Reservoirs to Enhance CO2 Storage Resource Estimates

The Energy & Environmental Research Center (EERC) developed methods and approaches for advanced characterization of unconventional oil and gas reservoirs to enhance CO2 storage resource estimates using samples collected from organic-rich shales of the Bakken Formation. The project was funded under U.S. Department of Energy (DOE) Cooperative Agreement No. DE-FE0024233, with nonfederal cost share provided by Hitachi High Technologies America. The project participants included the EERC, Hitachi High Technologies America, the team at the National Energy Technology Laboratory’s (NETL’s) computed tomography (CT) scanning laboratory in Morgantown, West Virginia, and several NETL staff who have worked on CO2 storage resource estimation. Investigations on the use of subsurface geologic formations for CO2 storage have been ongoing for many years. In the last decade, improvements in directional drilling technology and hydraulic fracturing of organic-rich shale and other tight rock formations have opened new opportunities for CO2 storage, with the potential cobenefit of enhancing gas and oil recovery. Gas-bearing, organic-rich shales have been of particular interest as a carbon storage target because their ability to store large volumes of CO2 is implied by their ability to store methane; however, estimating the CO2 storage resource of organic-rich shales and other unconventional reservoirs is challenging because of the lack of detailed geologic and petrophysical data that are needed to develop improved volumetric equations. According to NETL’s method for estimating regional-scale CO2 storage resources, the key factors that control CO2 storage in geologic formations include void space within induced fractures, natural fractures and matrix pores, as well as the occurrence and distribution of organic matter (OM) and clay minerals. A key goal of this effort was to use field emission scanning electron microscopy (FESEM) analysis of fine-grain unconventional reservoir rocks coupled with advanced image analysis and machine learning techniques to quantify the occurrence and distribution of porosity, OM, and clay minerals. By better understanding the potential migration pathways of CO2 within tight rocks and quantifying the occurrence of sorptive components (OM and clays) along potential flow pathways, methods to estimate the CO2 storage resource of such rocks can be refined. The Bakken petroleum system (Bakken) was used as the source of rock samples for this effort because it includes organic-rich shales with contrasting degrees of thermal maturity as well as tight, nonshale clastic rocks with varying clay mineral content. To better understand the key components of interest in tight rock samples, the EERC worked closely with Hitachi to optimize the FESEM settings necessary to resolve the sample mineralogy, porosity and OM content at micro- to nanoscale resolution. The EERC also worked closely with Hitachi to apply and improve its advanced mineral identification and characterization system (AMICS) software so that it is better suited for mineral identification at the high resolution necessary to resolve features of interest in fine-grained rocks such as organic-rich shales. The EERC also applied advanced image analysis software packages, including Ilastik, to classify and quantify the key components of interest within the samples using FESEM imagery. These advanced techniques allowed for quantification and differentiation of the void space within fractures, pores and OM, as well as a technique to determine and quantify the key mineral and OM components surrounding pore spaces. Being able to better quantify the void space and the potential accessibility of CO2 to sorptive minerals or OM within tight rocks allows for improved estimation of the CO2 storage resource potential of organic-rich shales and other unconventional formations. The information derived from the image analysis techniques was used to refine NETL’s method for estimating regional-scale CO2 storage resources in collaboration with staff from NETL. An additional goal of this work was to better understand rates of CO2 permeation, flow pathways, and sorption in organic-rich shales and nonshale reservoir rocks and to evaluate potential changes in CO2 flow over time. The EERC conducted long-duration (several weeks) CO2 flow-through testing at reservoir conditions using Bakken shale and nonshale samples to assess CO2 permeation rates and retention/sorption within core plugs to represent bulk matrix behavior. Conventional isothermal adsorption testing over a range of pressure conditions was also performed on pulverized Bakken samples to better assess potential maximum sorptive capacity of the samples. The results of this testing illustrated the higher sorptive capacity of the Bakken shales when compared to the sorptive capacity of the nonshale reservoir rock, which contains very little OM when compared to the Bakken shales. The results also illustrate the differences in permeation behavior as a function of fracture flow versus matrix flow. In an attempt to visualize CO2 permeation and flow behavior in Bakken shale samples over time, the EERC collaborated with NETL’s CT Lab in Morgantown, West Virginia. A variety of tests were performed at the NETL lab on unfractured and fractured samples of the Bakken shale. The unfractured Bakken shale samples did not result in CO2 migration within the samples over the testing duration; thus imagery of CO2 migration pathways within the matrix of Bakken samples was not obtained. The results of the flow-through testing within fractured samples illustrate changes in CO2 permeation rates over time, with a trend of decreasing CO2 flow over time. The results of this effort suggest that FESEM analysis coupled with advanced image analysis and machine learning techniques are effective in characterizing and quantifying the mineralogy, porosity, fractures, and OM content of 2-D imagery at the high resolution needed to identify features of interest in tight rocks. In addition, the image analysis techniques allow for identification and quantification of different porosity types as well as the key mineral components and/or OM that CO2 would contact in the reservoir as it migrates through pores and fracture networks. This is key information needed to better estimate the CO2 storage resource potential of organic-rich shales and other tight reservoirs. Additional work is needed to determine the sorptive capacity of the individual sample components (OM and clay minerals) at reservoir conditions so that this approach and the refined CO2 storage resource equation can be applied to other shale and unconventional reservoirs. In addition, subsequent work should be performed to better understand the number of images needed to use stereological approaches to estimate the volume of sample components using 2-D imagery, to explore machine learning techniques to differentiate between induced vs. natural fractures, and to estimate the connectivity of pores and fracture networks using 2-D imagery. Being able to derive this information at the microscale would facilitate scaling up of the sample characterization data used for reservoir modeling and simulation to estimate the CO2 storage resource potential of tight formations.

03 NATURAL GAS↗

DOE OSTI2019

NREL's Capabilities in Bio-Oil Characterization

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the capability to provide reliable analyses for biomass-derived liquids produced from thermochemical conversion, such as pyrolysis bio-oils. This fact sheet summarizes the standardized analytical methods that provide chemical information on bio-oil samples.

09 BIOMASS FUELS↗

DOE OSTI2019

Clean Energy Technologies for Oil & Gas Industry Operations

The declining prices of renewable energy technologies is an opportunity to potentially provide clean power and heat to industrial sectors, such as oil and gas, enabling more efficient production and use of resources. This presentation covers energy technology markets and JISEA programs on the intersection of renewable energy and oil and gas operations, including upstream extraction, midstream delivery, and refining.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2020

Renewable Energy Technology and Systems Integration for the Oil and Gas Industry

Introduction to the mission and research of the National Renewable Energy Laboratory (NREL) and the Joint Institute for Strategic Energy Analysis (JISEA). JISEA is co-sponsored by industries, governments, and partnered with several academic institutions (see https://www.jisea.org). Presentation will review statistics about the growth of renewable energy and also discuss potential future trends. It will review several specific case studies relevant to the oil and gas industry, including renewable energy for industrial operations and clean technologies and fuels that would be most relevant to oil and gas technologies and capabilities.

ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2020

Systematic Analysis of Drivers and Barriers of Cross-Sectorial Learning Between Nuclear and Oil and Gas Decommissioning Projects - 20139

Project and megaproject management in the energy sector have historically focused on the planning and delivery of the construction of infrastructure. Therefore, policies are predominantly oriented to support the construction of infrastructure rather than its decommissioning. However, globally, several facilities have reached (or will soon reach) their end-of-life and need to be decommissioned. These facilities span across the energy sector, including nuclear power plants and oil and gas rigs, whose decommissioning present unprecedented techno-socio-economic challenges. Moreover, globally, their decommissioning cost is estimated to reach hundreds of billions of US dollars and this budget keeps increasing, with limited knowledge-transfer across industries to mitigate the spiraling increase of this figure. Cross-sectorial knowledge-transfer is a way to tackle this matter and improve the planning and delivery of decommissioning and waste management projects. The aim of this research is to build a road-map based on cross-sectorial industrial experience, designed to promote the sharing of good practices between projects both within and across industries dealing with major decommissioning and waste management challenges. To reach this aim, the tacit knowledge of senior practitioners on several large scale nuclear and oil and gas decommissioning projects is made explicit by the means of semi-structured interviews, systematically analyzed through directed content analysis. The results of this analysis include a list of good practices that could and should be transferred to nuclear decommissioning projects, including the need to promote the adoption of incentives explicitly linked to the project deliverables, and to develop long-term plans to support smooth transition from operations to decommissioning. Suggestions about how the knowledge-transfer can be promoted within and across organizations are also discussed. In this way, this research provides practical guidance for project managers and policymakers on how to support the planning and delivery of projects with improved performance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

Integration of Nuclear with an Oil Refinery

This presentation presents the oil refinery requirements and conditions needed for the steam, the integration of the oil refinery with a small modular reactor light water reactor (LWR) and small modular reactor high temperature gas reactor (HTGR), and the carbon avoided by replacing the currently utilized natural gas with nuclear energy.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

CO 2 Enhanced Oil Recovery in the Dickinson Lodgepole Mounds

This fact sheet describes the opportunity to use carbon dioxide enhanced oil recovery (CO 2 EOR) in the Dickinson Lodgepole Mounds of Stark County, North Dakota. It highlights how geology and established practices can increase oil production while securely storing CO 2 and supporting local communities.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2016

An overview of uncertainty quantification techniques with application to oceanic and oil‐spill simulations

Abstract We give an overview of four different ensemble‐based techniques for uncertainty quantification and illustrate their application in the context of oil plume simulations. These techniques share the common paradigm of constructing a model proxy that efficiently captures the functional dependence of the model output on uncertain model inputs. This proxy is then used to explore the space of uncertain inputs using a large number of samples, so that reliable estimates of the model's output statistics can be calculated. Three of these techniques use polynomial chaos (PC) expansions to construct the model proxy, but they differ in their approach to determining the expansions' coefficients; the fourth technique uses Gaussian Process Regression (GPR). An integral plume model for simulating the Deepwater Horizon oil‐gas blowout provides examples for illustrating the different techniques. A Monte Carlo ensemble of 50,000 model simulations is used for gauging the performance of the different proxies. The examples illustrate how regression‐based techniques can outperform projection‐based techniques when the model output is noisy. They also demonstrate that robust uncertainty analysis can be performed at a fraction of the cost of the Monte Carlo calculation.

Iskandarani, Mohamed↗

DOE OSTI2016

Capillary pressure-saturation relations in quartz and carbonate sands: Limitations for correlating capillary and wettability influences on air, oil, and supercritical CO 2 trapping

Capillary pressure (P c )-saturation (S w ) relations are essential for predicting equilibrium and flow of immiscible fluid pairs in soils and deeper geologic formations. In systems that are difficult to measure, behavior is often estimated based on capillary scaling of easily measured P c –S w relations (e.g., air-water, and oil-water), yet the reliability of such approximations needs to be examined. In this study, 17 sets of brine drainage and imbibition curves were measured with air-brine, decane-brine, and supercritical (sc) CO 2 -brine in homogeneous quartz and carbonate sands, using porous plate systems under ambient (0.1 MPa, 23°C) and reservoir (12.0 MPa, 45°C) conditions. Comparisons between these measurements showed significant differences in residual nonwetting phase saturation, S nw,r . Through applying capillary scaling, changes in interfacial properties were indicated, particularly wettability. With respect to the residual trapping of the nonwetting phases, S nwr, CO2 > S nwr, decane > S nwr, air . Decane-brine and scCO 2 -brine Pc–Sw curves deviated significantly from predictions assuming hydrophilic interactions. Moreover, neither the scaled capillary behavior nor S nw,r for scCO 2 -brine were well represented by decane-brine, apparently because of differences in wettability and viscosities, indicating limitations for using decane (and other organic liquids) as a surrogate fluid in studies intended to apply to geological carbon sequestration. Thus, challenges remain in applying scaling for predicting capillary trapping and multiphase displacement processes across such diverse fields as vadose zone hydrology, enhanced oil recovery, and geologic carbon sequestration.

58 GEOSCIENCES↗

DOE OSTI2026

Simultaneous Determination of Halogens and Metals in Waste Plastic Pyrolysis Oil by Inductively Coupled Plasma Mass Spectrometry

A major barrier to integrating pyrolysis-derived oil into conventional refinery technology is the presence of impurities, particularly halogens and metals, that can deactivate catalysts. This study presents a novel, cost-effective approach for the simultaneous analysis of a subset of halogens, metals, nonmetals, and metalloids in complex, industrially relevant distilled pyrolysis oil samples, this was previously achievable only through multiple techniques. Excellent results were obtained using a widely accessible inductively coupled plasma mass spectrometry (ICP-MS) method with helium gas mode and standard laboratory consumables, enabling high-throughput analysis and efficient evaluation of adsorbent performance. Sample preparation is straightforward, requiring only dilution in a compatible matrix, and provides accurate and precise quantification, with 75%–137% spike recovery for Be, Ti, V, Cr, Fe, Ni, Co, Cu, As, Se, Mo, Cd, Sb, Tl, and Pb, and 62%–65% spike recovery for Cl and 109%–133% spike recovery for Br. Additionally, an enhanced version of the method using ICP-MS/MS and hydrogen gas is described, which has higher accuracy with 69%–112% spike recovery for Be, B, Ti, V, Fe, Co, Ni, Cu, As, Se, Mo, Cd, Sb, Tl, and Pb, with 85%–102% spike recovery for Cl and 63%–93% spike recovery for Br. Helium mode detection limits for industrially relevant elements (V, Fe, Ni, Cu, As, and Pb) are less than 1.7 µg/kg, and less than 0.2 mg/kg for Br and Cl. Furthermore, this methodology facilitates rapid systematic evaluation of adsorption capacities of materials under time-on-stream conditions and supports robust comparisons across diverse operating environments.

Lazarcik, James [University of Wisconsin-Madison, ↗

DOE OSTI2022

Assessment of antimicrobial activity of melittin encapsulated in bicontinuous microemulsions prepared using renewable oils

Abstract The objective of this study is to demonstrate that melittin, a well‐studied antimicrobial peptide (AMP), can be solubilized in an active form in bicontinuous microemulsions (BMEs) that employ biocompatible oils. The systems investigated consisted of Winsor‐III and ‐IV BME phases composed of Water/Aerosol‐OT (AOT)/Polysorbate 85/isopropyl myristate and a Winsor‐IV BME employing Polysorbate 80 and limonene. We found that melittin resided in an α‐helix‐rich configuration and was in an apolar environment for the AOT/Polysorbate 85 Winsor‐III system, suggesting that melittin interacted with the surfactant monolayer and was in an active conformation. An apolar environment was also detected for melittin in the two Winsor‐IV systems, but to a lesser extent than the Winsor‐III system. Small‐angle X‐ray scattering analysis indicated that melittin at a concentration of 1.0 g/L aq in the aqueous subphase of the Winsor‐IV systems led to the greatest impact on the BME structure (e.g., decrease of quasi‐periodic repeat distance and correlation length and induction of interfacial fluidity). The antimicrobial activity of the Polysorbate 80 Winsor‐IV system was evaluated against several bacteria prominent in chronic wounds and surgical site infections (SSIs). Melittin‐free BMEs inhibited the growth of all tested bacteria due to its oil, limonene, while the inclusion of 1.0 g/L aq of melittin in the BMEs enhanced the activity against several bacteria. A further increase of melittin concentration in the BMEs had no further enhancement. These results demonstrate the potential utility of BMEs as a delivery platform for AMPs and other hydrophilic and lipophilic drugs to inhibit antibiotic‐resistant microorganisms in chronic wounds and SSIs.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

The synergistic effects of rosehip oil and matrine against Icerya aegyptiaca (Douglas) (Hemiptera: Coccoidea) and the underlying mechanisms

Abstract BACKGROUND Icerya aegyptiaca (Douglas) is an important agricultural pest that has a protective wax shell. Insecticides generally fail to achieve the desired control of I. aegyptiaca because of difficulties penetrating this wax shell. Plant essential oils are rich in terpenoids and have strong penetrability and expansibility, which can enable the rapid penetration and absorption of insecticides, thereby improving the control effect. Matrine is a botanical insecticide with contact and stomach toxicity, low toxicity toward non‐target organisms and is environmentally friendly. In this study, we tested the insecticidal activity of rosehip oil (Ro)/matrine combinations and revealed the synergistic mechanism of Ro and its components with matrine in terms of physiology and biochemistry. RESULTS Ro/matrine combinations have strong penetrating power, enabling matrine to quickly penetrate the wax shell of I. aegyptiaca and enter the insect body. This improves the insecticidal activity and enhances inhibition of acetylcholinesterase activity. Ro and its main chemical constituents, cineole and (+)‐camphor, showed synergistic effects on matrine with synergic ratios of 4.79, 3.49 and 4.21, respectively. CONCLUSION Combinations of Ro, cineole and (+)‐camphor with matrine have good insecticidal effects on I. aegyptiaca while remaining safe to the environment. These combinations of biological insecticides have excellent development prospects and provide a new reference for the pest management of scale insects. © 2022 Society of Chemical Industry.

Zhou, Yi↗

DOE OSTI2023

Techno-economic and life cycle analyses for a supercritical biodiesel production process from waste cooking oil for a plant located in the Midwest United States

Existing literature lacks detailed techno-economic and environmental life cycle analyses (TEA-LCA) focused on supercritical biodiesel production pathways produced via waste products. Therefore, in this work, the TEA-LCA was conducted to generate supercritical biodiesel from waste cooking oil for plants located in the Midwest region of USA having annual production capacities of 10,600 and 128,000 t using Aspen Plus and GREET softwares. Here, two plant production capacities were chosen to capture the economies of scale impact on biodiesel manufacture cost. In the supercritical process, methanol and propane were used as a cosolvent to synthesize biodiesel from waste cooking oil (WCO) at 280 °C and 128 bar at a residence time of 8.4 min and a WCO conversion rate of 97%. Economic analysis revealed that the supercritical process was an economically attractive pathway with a 2-year payback period for the 10,600 t/year capacity along with a break-even selling price of $\$$ 2.42/gal of diesel. In case of the larger plant (128,000 t/year capacity), the payback period and the breakeven selling price were considerably lower at values of 0.4 years and $1.31/gal of diesel, respectively, due to economies of scale impact. The generated biodiesel from supercritical process for the both the plant capacities met European (EN14214) and US (ASTM D6751) fuel quality standards while the obtained commercially valuable side product, i.e., glycerol, adhered to a pharmaceutical grade of 99.7%. Cradle to gate life cycle analysis using GREET revealed that supercritical process possessed 17% lower CO2 emissions than alkali-catalyzed process and 4% lower CO2 emissions than the conventional diesel production process. Other biodiesel production pathways in the literature were also compared to the results of the TEA-LCA of supercritical biodiesel production pathway.

Biodiesel production↗

DOE OSTI2017

Development Optimization and Uncertainty Analysis Methods for Oil and Gas Reservoirs

Uncertainty complicates the development optimization of oil and gas exploration and production projects, but methods have been devised to analyze uncertainty and its impact on optimal decision-making. This paper compares two methods for development optimization and uncertainty analysis: Monte Carlo (MC) simulation and stochastic programming. Two example problems for a gas field development and an oilfield development are solved and discussed to elaborate the advantages and disadvantages of each method. Development optimization involves decisions regarding the configuration of initial capital investment and subsequent operational decisions. Uncertainty analysis involves the quantification of the impact of uncertain parameters on the optimum design concept. The gas field development problem is designed to highlight the differences in the implementation of the two methods and to show that both methods yield the exact same optimum design. The results show that both MC optimization and stochastic programming provide unique benefits, and that the choice of method depends on the goal of the analysis. While the MC method generates more useful information, along with the optimum design configuration, the stochastic programming method is more computationally efficient in determining the optimal solution. Reservoirs comprise multiple compartments and layers with multiphase flow of oil, water, and gas. We present a workflow for development optimization under uncertainty for these reservoirs, and solve an example on the design optimization of a multicompartment, multilayer oilfield development.

02 PETROLEUM↗

DOE OSTI2024

Oil-Pressure Based Apparatus for In-Situ High-Energy Synchrotron X-Ray Diffraction Studies During Biaxial Deformation

Background: Understanding biaxial loading response at the microstructural level is crucial in helping better design sheet manufacturing processes and calibrate/validate material deformation models. Objective: The objective of this work was to develop a low-cost testing apparatus to probe, with sufficient spatial resolution, the micro-mechanical response of a sheet material in-situ under biaxial loading conditions. Methods: The testing apparatus fabricated as a part of this study operates in a similar fashion to a standard bulge test and uses oil pressure to generate biaxial loading conditions. This biaxial testing apparatus was operated within a synchrotron beamline to characterize the mechanical response of a flash-processed steel sheet using in-situ high-energy X-ray diffraction (XRD) measurements. Further, the GSAS-II package was utilized to develop a workflow for the analysis of the large volume of diffraction data acquired. The workflow was then used to extract the peak position, width, and integrated intensity of the XRD peaks corresponding to the major body-centered cubic phase. Results: The equi-biaxial nature of the loading in the measured area was independently corroborated using experimental (XRD) and simulation (finite element analysis) methods. Furthermore, we discuss the evolution of elastic strain in the major body-centered cubic phase as a function of applied oil pressure and location on the steel sheet. Conclusions: A key advantage of the biaxial apparatus fabricated in this synchrotron study is demonstrated using the results obtained for the flash-processed steel sheet – i.e., mapping the lattice plane-dependent response to biaxial loading for a relatively large sample area in a spatially resolved manner.

36 MATERIALS SCIENCE↗

DOE OSTI2020

A spatial-statistical investigation of surface expressions associated with cyclic steaming in the Midway-Sunset Oil Field, California

In the Midway Sunset Oil Field in Central California, operators inject steam into the shallow diatomite formation to enhance heavy oil recovery through imbibition, wettability alteration, and viscosity reduction, among other mechanisms. The injected steam, however, does not always remain in the reservoir or return through the wells. In two zones in the study area, the steam comes out at the surface, creating sinkholes, seeps, and steam outlets. These phenomena, called “surface expressions,” pose safety and environmental hazards. Even though these surface expressions are a widespread problem in Central California, they are not well documented and understood. Possible causes of the surface expressions include: high injection pressure, structurally controlled flow patterns, leakage of steam through old improperly abandoned wells, high injection volumes, or flow along naturally occurring faults, among other possible factors. This work examines attributes of the zones with surface expressions in order to determine factors that may contribute to their occurrence. Spatial statistical analysis using logistic regression, random forests, and classification trees is used to explore the relationship between the surface expressions and geological and production-related attributes. The results point to a significant spatial correlation between the surface expressions and two predictors: concentration of plugged wells and geologic seal thickness. The results guide follow-up studies to further investigate the role of well abandonment and seal thickness in the occurrence of surface expressions.

02 PETROLEUM↗

DOE OSTI2018

Life cycle assessment of novel technologies for algae harvesting and oil extraction in the renewable diesel pathway

There are many challenges and technical barriers to implementation of a viable commercial process to produce algae-based biofuels. Biofuels made from algae must typically go through a complicated series of unit processes for algae cultivation, harvesting, dewatering, oil extraction, conversion, and other logistical steps. The National Alliance for Advanced Biofuels and Bioproducts (NAABB) was developed to produce new technologies to be implemented by the algal biofuel industry in an effort to improve the process economics and environmental benefits associated with algae fuels. This LCA study investigated the environmental impacts associated with four harvesting and two extraction technologies developed by NAABB researchers. Gate-to-gate LCA results show that all novel technologies appear to have the potential to provide at least modest decreases in greenhouse gas (GHG) emissions compared to current default algae process technologies. 14 scenarios of different combinations of harvesting and extraction unit operations were further evaluated in the context of the full life cycle for producing algae-based renewable diesel. Results indicate that selection of a particular technology for a unit operation can have consequences that affect other stages of the full biofuels life cycle, both upstream and downstream from the unit operation in question. Considering material and energy inputs, operation efficiency, impacts on on-site recycled energy, and co-products credits, acoustic harvesting followed by acoustic oil extraction give the best performance on the overall lifecycle, which reduce the GHG emissions by roughly 45% compared to the base case. LCA modeling also demonstrates that co-products produced at various points of the value chain, for use within or outside the algae biofuels system boundary, considerably affect the LCA results beyond harvesting and extraction unit processes.

59 BASIC BIOLOGICAL SCIENCES↗