Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NOSE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

The calculation of steady non-linear transonic flow over finite wings with linear theory aerodynamics

The feasibility of calculating steady mean flow solutions for nonlinear transonic flow over finite wings with a linear theory aerodynamic computer program is studied. The methodology is based on independent solutions for upper and lower surface pressures that are coupled through the external flow fields. Two approaches for coupling the solutions are investigated which include the diaphragm and the edge singularity method. The final method is a combination of both where a line source along the wing leading edge is used to account for blunt nose airfoil effects; and the upper and lower surface flow fields are coupled through a diaphragm in the plane of the wing. An iterative solution is used to arrive at the nonuniform flow solution for both nonlifting and lifting cases. Final results for a swept tapered wing in subcritical flow show that the method converges in three iterations and gives excellent agreement with experiment at alpha = 0 deg and 2 deg. Recommendations are made for development of a procedure for routine application.

Cunningham, A. M., Jr.↗
NASA NTRS1976

Planetary/DOD entry technology flight experiments. Volume 3: Planetary entry flight experiments handbook

The environments produced by entry into Jupiter and Saturn atmospheres are summarized. Worst case design environments are identified and the effect of entry angle, type of atmosphere and ballistic coefficient variations are presented. The range of environments experienced during earth entry is parametrically described as a function of initial entry conditions. The sensitivity of these environments to vehicle ballistic coefficient and nose radius is also shown. An elliptical deorbit maneuver strategy is defined in terms of the velocity increment required versus initial entry conditions and apoapsis altitude. Mission time, ground track, and out of plane velocity penalties are also presented. Performance capabilities of typical shuttle launched boosters are described including the initial entry conditions attainable as a function of paylaod mass and apoapsis altitude.

Christensen, H. E.↗
NASA NTRS1976

Asymmetric aerodynamic forces on aircraft at high angles of attack - some design guides

Aerodynamic side forces on forebodies are considered that are produced by two types of flow: asymmetric vortices on bodies of revolution and nonuniform flow separation on square bodies with rounded corners under spinning conditions. Steady side forces that can be as large as the normal force are produced by asymmetric vortices on pointed forebodies. This side force has a large variation with Reynolds number, decreases rapidly with Mach number, and can be nearly eliminated with small nose bluntness or strakes. The angle of attack where the side force first occurs depends primarily on body geometry. The theoretical techniques to predict these side forces are necessarily semi-empirical because the basic phenomenon is not well understood. The side forces produced by nonuniform flow separation under spinning conditions depend extensively on spin rate, angle of attack, and Reynolds number. The application of simple crossflow theory to predict this side force is inadequate much below angles of attack of 90 deg.

Chapman, G. T.↗
NASA NTRS1976

Shuttle model tailcone pressure distribution at low subsonic speeds of a 0.03614-scale model in the NASA/LaRC low-turbulence pressure tunnel (LA81), volume 1

An investigation was conducted in the NASA/LaRC Low-Turbulence Pressure Tunnel on a 0.03614-scale orbiter model of a 089B configuration with a 139B configuration nose forward of F.S. 500. The tailcone was the TC sub 4 design and was instrumented with eighty-nine pressure orifices. Control surfaces were deflected and three wind tunnel mounting techniques were investigated over an angle-of-attack range from -2 deg to a maximum of 18 deg. In order to determine the sensitivity of the tailcone to changes in Reynolds number, most of the test was made at a Mach number of 0.20 over a Reynolds number range of 2.0 to 10 million per foot. A few runs were made at a Mach number of 0.30 at Reynolds numbers of 4.0, 6.0, and 8 million per foot.

Ball, J. W.↗
NASA NTRS1976

Heat shield characterization: Outer planet atmospheric entry probe

A full scale carbon phenolic heat shield was fabricated for the Outer Planet Probe in order to demonstrate the feasibility of molding large carbon phenolic parts with a new fabrication processing method (multistep). The sphere-cone heat shield was molded as an integral unit with the nose cap plies configured into a double inverse chevron shape to achieve the desired ply orientation. The fabrication activity was successful and the feasibility of the multistep processing technology was established. Delaminations or unbonded plies were visible on the heat shield and resulted from excessive loss of resin and lack of sufficient pressure applied on the part during the curing cycle. A comprehensive heat shield characterization test program was conducted, including: nondestructive tests with the full scale heat shield and thermal and mechanical property tests with small test specimen.

Mezines, S. A.↗
NASA NTRS1976

The Effects of Blowing Over Various Trailing-edge Flaps on an NACA 0006 Airfoil Section, Comparisons with Various Types of Flaps on other Airfoil Sections, and an Analysis of Flow and Power Relationships for Blowing Systems

The results are presented of a two-dimensional investigation conducted to determine the effect of blowing over various types of trailing-edge flaps on a wing having the NACA 0006 airfoil section and a drooped-nose flap. The position and profile of the trailing-edge flap, the nozzle height, and the location of the flap with respect to the nozzle were found to be important variables. Data from many investigations were used to make an evaluation of the effects of blowing on lift. An analysis was made of flow and power relationships for blowing systems.

Dods, J. B., Jr.↗
NASA NTRS1976

A tow concept for the space shuttle orbiter approach and landing test

The tow concept provides the means for evaluating the orbiter aerodynamic performance and handling qualities in the same configuration as expected in actual space shuttle flight operation. A Boeing 747-100 aircraft has engine-out capability to tow the orbiter to an altitude that permits a safe orbiter approach and landing. The tow concept also provides a means for conducting a comprehensive ground test program before proceeding into the actual ALT flight operations. The implementation of the tow concept requires only a minor structural modification in the nose section of the orbiter vehicle; requires minor modifications in the 747 cargo bay; and makes use of those orbiter onboard systems installed in the ALT orbiter vehicle. The 747 wake turbulence does not constitute a problem for the orbiter during take-off or climb to altitude. The impact that the tow concept would have on the cost and schedule of the space shuttle program was not evaluated in this study.

Bonner, T. F., Jr.↗
NASA NTRS1975

Drogue parachute deployment dynamics of the space shuttle solid rocket booster

Theoretical analysis and experimental investigations are presented for two deployment concepts of the drogue parachute deployment for the space shuttle solid rocket booster. The analysis represents the motion of three coupled rigid bodies, with one of the bodies having variable mass and moment of inertia. The unfurling process of the parachute from the bag is idealized as the flow of a continuum out of a control surface. The pilot parachute or tethered nose cap is modeled as a flexible pendulum with a nonlinear spring and a moving support. Measured wind tunnel test data compare reasonably well with the theory.

Banerjee, A. K.↗
NASA NTRS1975

100-kW hingeless metal wind turbine blade design, analysis and fabrication

The design, fabrication and analysis of aluminum wind turbine rotor blades is discussed. The blades are designed to meet criteria established for a 100-kilowatt wind turbine generator operating between 8 and 60-mile-per-hour speeds at 40 revolutions per minute. The design wind speed is 18 miles per hour. Two rotor blades are used on a new facility which includes a hingeless hub and its shaft, gearbox, generator and tower. Experience shows that, for stopped rotors, safe wind speeds are strongly dependent on blade torsional and bending rigidities which the basic D spar structural blade design provides. The 0.25-inch-thick nose skin is brake/bump formed to provide the basic 'D' spar structure for the tapered, twisted blades. Adequate margins for flutter and divergence are predicted from the use of existing, correlated stopped rotor and helicopter rotor analysis programs.

Donham, R. E.↗
NASA NTRS1976

Sonic boom theory - Its status in prediction and minimization

This paper gives a brief review of the currently accepted understanding of sonic boom phenomena and describes the manner in which modified linearized theory and geometric acoustics are used to predict the sonic boom caused by a complex aircraft configuration. Minimization methods that have evolved in recent years are discussed with particular attention given to a method developed by Seebass and George for an isothermal atmosphere which was modified for the real atmosphere by Darden. An additional modification which permits the relaxation of the nose bluntness requirement in the defining aircraft is also discussed. Finally, an overview of current areas of sonic boom research is given.

Darden, C. M.↗
NASA NTRS1976

Roughness induced transition criteria for space shuttle-type vehicles

Tripping effectiveness of surface roughness on a delta wing shuttle orbiter model at 20 deg angle of attack is compared to that on plane and axisymmetrical bodies with and without longitudinal pressure gradients. The experimental data presented are compared on the basis of effective roughness Reynolds number since this parameter is not sensitive to flow conditions downstream of the roughness. The discussion covers the effective roughness Reynolds number as a function of roughness position Reynolds number, effective size ratio as a function of pressure gradient and distance from vehicle nose, and effect of spanwise roughness position on roughness effectiveness. It is shown that conventional criteria for sizing roughness elements which promote transition in two-dimensional zero-pressure gradient flows are insufficient for high-pressure gradient flows and three-dimensional flows. Roughness much smaller than that given by conventional criteria can cause transition and significantly increase the heating load.

Morrisette, E. L.↗
NASA NTRS1976

Whistler mode plasma waves observed on Electron Echo 2

Observations of whistler-mode waves associated with beams of electrons injected into the ionosphere are reported. The measurements are from the plasma-wave experiments carried on the Electron Echo 2 sounding rocket launched on September 24, 1972. Over 2000 electron injections were made with durations of 8 ms and 64 ms and pitch angles from 0 to 180 deg. The electric field receivers carried on the ejected nose cone observed strong whistler waves in the range from less than 100 kHz up to the electron cyclotron frequency of 1400 kHz. The whistler characteristics fall into four distinct types depending on pitch angle and gun energy. Both frequency and amplitude showed strong dependence on time from the start of the pulse and pitch angle. Cases of enhancement at the leading edge of a gun pulse, growth during a pulse, and echoes after the end of a pulse were all observed.

Monson, S. J.↗
NASA NTRS1976

Wind-tunnel testing with a rotary-balance apparatus to simulate aircraft spin motions

Experiments have been conducted in the Ames 12-Foot Pressure Wind Tunnel on a simple airplane-like model using a rotary-balance apparatus to simulate a steady spin motion at high angles of attack. Tests were run at Mach numbers of 0.1 and 0.25 over a wide Reynolds number range with the angle of attack varying from 45 to 90 deg. During previous tests of the same research model, some difficulties were experienced with measurement accuracy in the low-to-medium range of Reynolds number because of limitations in the sensitivity of selected force balances. For the present tests, special balances were built to provide accurate measurements of the nose and tail contributions to spin motions and improvements were made to the overall test apparatus. The results of this test, including some interesting hysteresis effects with spin rate, are described. Some of the problems associated with rotary-balance tests at high Reynolds numbers are discussed. A new large-scale rotary apparatus now nearing completion for use in the Ames 12-Foot and 11- by 11-Foot Wind Tunnels is described briefly.

Malcolm, G. N.↗
NASA NTRS1976

Injection boundary dynamics during a geomagnetic storm

A series of proton and electron injections were observed by Explorer 45 associated with several substorms during the main phase of the Feb. 24, 1972 geomagnetic storm. The 1- to 290-keV protons and 1- to 560-keV electrons were observed in the evening quadrant up to L of about 5.2. A model distorted dipole magnetic field and McIlwain's E3 convection electric field were used to backtrack the energy-dispersed electron and proton fluxes to their source at the time of injection. The source turns out to be a region extending over several earth radii outside an injection boundary. In the night magnetosphere, the inferred injection boundary is displaced inward with each successive substorm. The energy dispersion plot of the particles injected during orbit 314 indicates that as the energy of the observed particles decreases there is a smooth transition to the position of the plasmapause. This suggests that for that substorm the injection boundary and the plasmapause were one and the same. The proton 'noses' reported by Smith and Hoffman (1974) are discussed.

Konradi, A.↗
NASA NTRS1976

Attitude control system

An attitude control system is described in which angular rate signals are generated by rate gyros mounted closely adjacent to gimbaled engines at the rear of a vehicle. Error signals representative of a commanded change in vehicle angle or attitude are obtained from a precision inertial platform located in the nose region of the vehicle. The rate gyro derived signals dominate at high frequencies where dynamic effects become significant, and platform signals dominate at low frequencies where precision signals are required for a steady vehicle attitude. The blended signals are applied in a conventional manner to control the gimbaling of vehicle engines about control axes.

Vonpragenau, G. L.↗
NASA NTRS1976

Heat-transfer distributions on a 0.013-scale shuttle solid rocket booster at Mach 3.70 and angles of attack from 0 deg to 180 deg

An experimental investigation was conducted in the Langley Unitary Plan wind tunnel to estimate the peak aerodynamic heating on the space shuttle solid rocket booster during the descent phase of its flight. Heat transfer measurements were obtained using 0.013 scale models instrumented with thermocouples at a Mach number of 3.70, Reynolds number per meter of 11.48 million, and angles of attack from 0 to 180 deg. At angles of attack of 0 and 180 deg, heat transfer measurements on the cylindrical section of the model between the conical nose and ring interaction region were in good agreement with flat plate strip theory for laminar and turbulent flow. At angles of attack up to 30 deg, measurements on this section of the model were in good agreement with laminar swept-cylinder theory, whereas at angles of attack from 120 to 180 deg, the measurements were in good agreement with turbulent swept-cylinder theory. The good agreement with turbulent theory indicated that large flow disturbances created by the nozzle and afterbody flare at these large angles of attack influenced the downstream heating primarily by promoting boundary layer transition. Measurements obtained at 90 deg angle of attack were indicative of laminar flow.

Lamb, M.↗
NASA NTRS1976

A flight investigation of piloting techniques and crosswind limitations during visual STOL-type landing operations

A flight research program was undertaken to investigate problems concerned with landing a STOL airplane in crosswind conditions. The program included a study of piloting techniques and crosswind limitations during visual STOL type landing operations. The results indicated that the crosswind was more limiting during the ground roll out than during the airborne phases. The pilots estimated that the crosswind limit for commercial STOL type operations with the test aircraft would be approximately 15 to 20 knots. The pilots thought that the crosswind limits for ground operation might be extended by incorporating wing-lift spoilers, improved nose gear steering, and improved engine response. The pilots agreed that a crosswind landing gear would also be beneficial.

Fisher, B. D.↗
NASA NTRS1976

Landing practices of general aviation pilots in single-engine light airplanes

The methods and techniques used by a group of general aviation pilots during the landing phase of light airplane operations are documented. The results of 616 landings made by 22 pilots in 2 modern, four-place, single-engine, flight airplanes (one having a low wing and the other, a high wing) are presented. The landings were made on both a long runway (1524 m (5000 ft)) and a short runway (762 m (2500 ft)); both runways were considered typical of those used in general aviation. The results generally show that most of the approaches were fast with considerable floating during the flares and with touchdowns that were relatively flat or nose-low.

Goode, M. W.↗