Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Locking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Solid-state lasers for coherent communication and remote sensing

Semiconductor-diode laser-pumped solid-state lasers have properties that are superior to other lasers for the applications of coherent communication and remote sensing. These properties include efficiency, reliability, stability, and capability to be scaled to higher powers. We have demonstrated that an optical phase-locked loop can be used to lock the frequency of two diode-pumped 1.06 micron Nd:YAG lasers to levels required for coherent communication. Monolithic nonplanar ring oscillators constructed from solid pieces of the laser material provide better than 10 kHz frequency stability over 0.1 sec intervals. We have used active feedback stabilization of the cavity length of these lasers to demonstrate 0.3 Hz frequency stabilization relative to a reference cavity. We have performed experiments and analysis to show that optical parametric oscillators (OPO's) reproduce the frequency stability of the pump laser in outputs that can be tuned to arbitrary wavelengths. Another measurement performed in this program has demonstrated the sub-shot-noise character of correlations of the fluctuations in the twin output of OPO's. Measurements of nonlinear optical coefficients by phase-matched second harmonic generation are helping to resolve inconsistency in these important parameters.

Byer, Robert L.↗
NASA NTRS1991

Quick application/release nut with engagement indicator (commercial application of an innovative nut design)

This is an assembly which permits a fastener to be inserted or removed from either side with an indicator of fastener engagement. The nut has a plurality of segments, preferably at least three segments, which are internally threaded, spring loaded apart by an internal spring, and has detents on opposite sides which force the nut segments into operative engagement with a threaded member when pushed in and release the segments for quick insertion or removal of the fastener when moved out. When the nut is installed, end pressure on the detents presses the nut segments into operative engagement with a threaded member where continued rotation locks the structure together with the detents depressed to indicate positive locking engagement of the nut. On removal, counterclockwise rotation relieves the endwise pressure on the detents, permitting internal springs to force the detents outward, allowing the nut segments to move outward and separate to permit quick removal of the fastener.

Wright, Jay M.↗
NASA NTRS1991

A geometric nonlinear degenerated shell element using a mixed formulation with independently assumed strain fields

A mixed formulation is chosen to overcome deficiencies of the standard displacement-based shell model. Element development is traced from the incremental variational principle on through to the final set of equilibrium equations. Particular attention is paid to developing specific guidelines for selecting the optimal set of strain parameters. A discussion of constraint index concepts and their predictive capability related to locking is included. Performance characteristics of the elements are assessed in a wide variety of linear and nonlinear plate/shell problems. Despite limiting the study to geometric nonlinear analysis, a substantial amount of additional insight concerning the finite element modeling of thin plate/shell structures is provided. For example, in nonlinear analysis, given the same mesh and load step size, mixed elements converge in fewer iterations than equivalent displacement-based models. It is also demonstrated that, in mixed formulations, lower order elements are preferred. Additionally, meshes used to obtain accurate linear solutions do not necessarily converge to the correct nonlinear solution. Finally, a new form of locking was identified associated with employing elements designed for biaxial bending in uniaxial bending applications.

Graf, Wiley E.↗
NASA NTRS1992

Quick application/release nut with engagement indicator

A composite nut is shown which permits a fastener to be inserted or removed from either side with an indicator of fastener engagement. The nut has a plurality of segments, preferably at least three segments, which are internally threaded, spring loaded apart by an internal spring, and has detents on opposite sides which force the nut segments into operative engagements with a threaded member when pushed in and release the segments for quick insertion or removal of the nut when moved out. When the nut is installed, end pressure on one of the detents presses the nut segments into operative engagement with a threaded member where continued rotation locks the structure together with the detents depressed to indicate positive locking engagement of the nut. On removal, counterclockwise rotation of the nut relieves the endwise pressure on the detents, permitting internal springs to force the detents outward and allowing the nut segments to move outward and separate to permit quick removal of the fastener.

Wright, Jay M.↗
NASA NTRS1991

Geodynamic laser ranging system laser transmitter

A description is given of the requirements and design options in the development of a spaceborne laser transmitter for NASA's Geodynamic Laser Ranging System. Three different oscillators are considered. The first is an injection-seeded ring oscillator yielding 1 mJ of energy within a 120-ps pulse. The second is a frequency-modulated mode-locked oscillator emitting 0.30 nJ in a 20-ps pulse. The third is a self-starting, additive pulse mode-locked laser. Detailed design considerations and preliminary results of these lasers are reported as well as the design of a unique multipass amplifier.

Dallas, J. L.↗
NASA NTRS1992

Doppler tracking of planetary spacecraft

This article concerns the measurement of Doppler shift on microwave links that connect planetary spacecraft with the Deep Space Network. Such measurements are made by tracking the Doppler effect with phase-locked loop receivers. A description of equipment and techniques as well as a summary of the appropriate mathematical models are given. The two-way Doppler shift is measured by transmitting a highly-stable microwave (uplink) carrier from a ground station, having the spacecraft coherently transpond this carrier, and using a phase-locked loop receiver at the ground station to track the returned (downlink) carrier. The largest sources of measurement error are usually plasma noise and thermal noise. The plasma noise, which may originate in the ionosphere or the solar corona, is discussed; and a technique to partially calibrate its effect, involving the use of two simultaneous downlink carriers that are coherently related, is described. Range measurements employing Doppler rate-aiding are also described.

Kinman, Peter W.↗
NASA NTRS1993

Phase Detector For Rectangular Waveforms

Phase detector for use with phase-locked-loops, servocontrol, and other electronic circuits designed to avoid disadvantages of other phase detectors. Used with both intermittent and continuous input signals. Circuit offers several advantages; reference signals continuous, burst of few pulses, or single pulse. Circuit "coasts" in absence of reference signal. Generates no steady-state output waveform at lock which makes filtering easier.

Dischert, Robert A.↗
NASA NTRS1993

Trip Roller Clutch

Bidirectional roller-locking mechanism offers advantages of efficiency and controllability. Trip roller clutch contains back-to-back roller-locking, overrunning clutches released (tripped) with small magnetic forces. Designed to operate with lubricant. Unlike other friction-based devices, trip roller clutch remains cool during operation.

Vranish, John M.↗
NASA NTRS1987

Space-qualified submillimeter radiometer

The purpose of this research was to develop a reliable submillimeter wave spectrometer for space-borne high frequency spectral line work. The emphasis was on improving the efficiency of frequency multipliers to limit the system components to rugged, low power consumption solid-state devices. This research has allowed Millitech to develop increased efficiency and performance in Millitech's existing line of submillimeter components and systems. Millitech has fabricated and tested a complete solid-state spectrometer front end for use at 560 GHz (the 1(sub 10) to 1(sub 01) transition of water vapor). The spectrometer was designed with the rigors of flight conditions in mind. The spectrometer uses a phase-locked, solid-state Gunn diode oscillator as the local oscillator, employing a tripler to produce about 3 mW of power at 285 GHz, and a low noise second harmonic waveguide mixer which requires less than 2 mW of LO power. The LO (and the signal) is injected into the mixer by means of a quasioptical diplexer. The measured system noise temperature is 2800 K (DSB) over 400 MHz. The whole spectrometer front end is compact (21 cm by 21 cm by 24 cm), light (7.4 kg), and has a power consumption of less than 8 W. Other topics explored in this work include compact frequency agile phase lock loops, optical filters, and InP Gunn oscillators for low noise applications. As a result of this research, the improvement in the design of multipliers and harmonic mixers will allow their use as the LO power for a variety of satellite-borne receivers operating in the 200 to 600 GHz frequency range.

Huguenin, G. R.↗
NASA NTRS1992

Adaptive low-bandwidth tracking of Galileo and Pioneer 10 carriers

In the Deep Space Network, tracking of residual carrier phase typically occurs with a fixed-bandwidth phase-locked loop using a bandwidth sufficiently wide to prevent loss of lock under worst-case conditions of signal dynamics, received signal phase noise, and receiver phase noise. Much of the time, however, such a high bandwidth is not required and may inflict unnecessarily heavy penalties on loop signal-to-noise ratios. This article describes a technique for improving tracking performance by permitting initial tracking at narrow bandwidths and gradually widening the loop as needed. The cost is a requirement for signal buffering, which is relatively inexpensive for low data rate applications. Results based on off-line processing of recorded carrier data from Galileo and Pioneer 10 are presented, and show potential 10-16 dB gains in loop SNR over worst-case fixed-bandwidth tracking.

Watola, D. A.↗
NASA NTRS1993

Quick acting gimbal joint

An improved linkage assembly provides for locking the pivotable position of one member relative to another member. The linkage assembly permits the unlocking of these members, their subsequent repositioning, and the reliable relocking in a desired position without utilizing tooling. The first member includes a pair of spaced apart support flanges each having a through aperture therein defining a flange female spline. The second member has an end positioned between the pair of support flanges and also includes a through aperture defining a pair of second member female splines. A pair of control members are each slidably moveable along the common axis and extend through the respective flanges. Each control member has a male splined portion which normally engages both the respective flange female spline and the second member female spline to lock the rotatable position of the first and second members. When each of the control members are pressed inward simultaneously, the male splined portions disengage the flange female splines to permit rotation of the first member about the common axis with respect to the second member.

William B Wood↗
NASA NTRS1991

A self-reconfigurable manipulator system with dextrous bracing structure

The authors present a dextrous bracing structure of a dual-arm system as a means of implementing a self-reconfigurable manipulator system. The dextrous bracing structure allows a dual-arm system to relocate the bracing point between two arms, select the type of contact as the bracing point, and lock or release the joints of individual arms. The self-reconfigurable dual-arm system is now capable of reconfiguring its topology through serial, parallel and bracing structures, supporting general types of contact, rigid or sliding, as well as locking or releasing some of its joints as needed. The focus is on an analysis of the effects of the dextrous bracing on the performance of a dual-arm system in terms of dual-arm manipulabilities and resistivities. The analysis shows that a self-reconfigurable dual-arm system with a dextrous bracing structure gives continuously varying performance characteristics ranging from serial to parallel structures.

Lee, Sukhan↗
NASA NTRS1993

Plio-Pleistocene time evolution of the 100-kyr cycle in marine paleoclimate records

A new time-series analysis technique (called envelope inversion), which is based on multiple taper spectral analysis, is used to address the question of an abrupt versus a gradual onset of the 100-kyr ice-age periodicity in the middle Pleistocene. Three long (greater than 2.6 m.y.) time series from Deep Sea Drilling Project site 607 (midlatitude Atlantic) and Ocean Drilling Program site 677 (equatorial Pacific) were analyzed using delta(O-18) records. Results do not yield compelling evidence for an abrupt change in the 100-kyr delta(O-18) signal. Rather, the results suggest that the 100-kyr delta(O-18) cycle is phase-locked with the 124-kyr eccentricity cycle some 300-400 kyr prior to its late Pleistocene growth in amplitude and phase lock with the 95-kyr eccentricity cycle.

Park, Jeffrey↗
NASA NTRS1993

Constraints on interseismic deformation at Japan trench from VLBI data

Space geodetic data from very long baseline interferometry (VLBI) was used to estimate velocity relative to the plate interiors of two sites on the deforming leading edge at the Japan trench. Elastic models of interseismic deformation and results obtained were used to put constraints on the slip rate along the main thrust of the Japan subduction zone. Observed velocities reflect the sum of permanent west-northwest shortening in Honshu, elastic deformation due to locking of the main thrust fault at the Japan trench, and deformation associated with the subducting Phillipine plate. These velocities limit the locked segment of the main thrust at the Japan trench to 27 km vertically and 100 km along the dip. This indicates that the main Pacific plate thrust fault is not strongly coupled and probably does not generate strong earthquakes.

Argus, Donald F.↗
NASA NTRS1993

Rapid transaction-undo recovery using twin-page storage management

This paper presents a twin-page storage method, which is an alternative to the TWIST (twin slot) approach by Reuter, for rapid transaction-undo recovery. In contrast to TWIST, our twin-page approach allows dirty pages in the buffer to be written at any instant onto disk without the requirement of undo logging, and, when a transaction is aborted, no explicit undo is required. As a result, all locks accumulated by the aborted transaction can be released earlier, allowing other transactions waiting for the locks to proceed. Through maintenance of aborted transaction identifiers, invalid pages written by the aborted transaction coexist with other valid pages and are guaranteed not be accessed by subsequent transactions. Instead of an explicit undo, most of the invalid pages are overwritten by subsequent normal updates. Performance in terms of disk I/O and CPU overhead for transaction-undo recovery is analyzed and compared with TWIST. It is shown that our scheme is particularly suited for applications where there are a large number of updates written onto disk when transactions are aborted, and there are frequent aborts. The approach, however, is not as applicable to environments where transactions are typically short or rarely aborted, or most updates are not written onto disk before a commitment.

Wu, Kun-Lung↗
NASA NTRS1992

Free-space laser communication technologies IV; Proceedings of the 4th Conference, Los Angeles, CA, Jan. 23, 24, 1992

Papers included in this volume are grouped under topics of receivers; laser transmitters; components; system analysis, performance, and applications; and beam control (pointing, acquisition, and tracking). Papers are presented on an experimental determination of power penalty contributions in an optical Costas-type phase-locked loop receiver, a resonant laser receiver for free-space laser communications, a simple low-loss technique for frequency-locking lasers, direct phase modulation of laser diodes, and a silex beacon. Particular attention is given to experimental results on an optical array antenna for nonmechanical beam steering, a potassium Faraday anomalous dispersion optical filter, a 100-Mbps resonant cavity phase modulator for coherent optical communications, a numerical simulation of a 325-Mbit/s QPPM optical communication system, design options for an optical multiple-access data relay terminal, CCD-based optical tracking loop design trades, and an analysis of a spatial-tracking subsystem for optical communications.

Begley, David L.↗
NASA NTRS1992

Characterization of a Nd:YAG doubled pulsed laser system

A description of a frequency doubled, double pulsed Nd:YAG laser that is to be used to pump an injection locked Ti:Sapphire power oscillator is presented. These two lasers make up the transmitter portion of the Lidar Atmospheric Sensing Experiment (LAWSE) instrument. LASE is a Lidar/DIAL experiment that is to measure water vapor in the troposphere. By utilizing the twin concept, both pulses can be produced with a single laser system, thereby minimizing cost, size, and weight. Alignment problems associated with having two separate lasers each produce one of the twin pulses are also alleviated. The LASE transmitter consists of a doubled pulsed Nd:YAG laser that will pump a Ti:Sapphire power oscillator that will be injection-locked by a diode laser. The wavelength of the Ti:Sapphire output will be tunable from 813 to 818 nm. A performance summary of the pump laser is given. The data verify that the pump laser can meet the performance requirements to pump the Ti:Sapphire power oscillator.

Williams-Byrd, Julie A.↗
NASA NTRS1923

Control in Circling Flight

This investigation was undertaken for the purpose of developing instruments that would record the forces and positions of all three controls, and to obtain data on the behavior of an airplane in turns. All the work was done on a standard rigged JN4H (airplane no. 2 of National Advisory Committee for Aeronautics, report no. 70). It was found that the airplane was longitudinally unstable and nose heavy; that it was laterally unstable, probably due to too little dihedral; and that it was directionally unstable, due to insufficient fin area, this last being very serious, for in case of a loss of rudder control the airplane immediately whips into a spin from which there is no way of getting it out. On the other hand, it was found possible to fly quite satisfactorily with the rudder locked, and safely, though not so well, with the ailerons locked.

Norton, F H↗