Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Italy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Cryogenic light detectors with thermal signal amplification for 0 νββ search experiments

As a step towards the realization of cryogenic-detector experiments to search for neutrinoless double-beta decay (such as CROSS, BINGO, and CUPID), we investigated a batch of 10 Ge light detectors (LDs) assisted by Neganov-Trofimov-Luke (NTL) signal amplification. Each LD was assembled with a large cubic light-emitting crystal (45 mm side) using the recently developed CROSS mechanical structure. The detector array was operated at milli-Kelvin temperatures in a pulse-tube cryostat at the Canfranc underground laboratory in Spain. We achieved good performance with scintillating bolometers from CROSS, made of Li 2 100 MoO 4 crystals and used as reference detectors of the setup, and with all LDs tested (except for a single device that encountered an electronics issue). No leakage current was observed for 8 LDs with an electrode bias up to 100 V. Operating the LDs at an 80 V electrode bias applied in parallel, we obtained a gain of around 9 in the signal-to-noise ratio of these devices, allowing us to achieve a baseline noise RMS of O(10 eV). Thanks to the strong current polarization of the temperature sensors, the time response of the devices was reduced to around half a millisecond in rise time. The achieved performance of the LDs was extrapolated via simulations of pile-up rejection capability for several configurations of the CUPID detector structure. Despite the sub-optimal noise conditions of the LDs (particularly at high frequencies), we demonstrated that the NTL technology provides a viable solution for background reduction in CUPID.

47 OTHER INSTRUMENTATION↗

Distinguishing prompt-collapse binary neutron star mergers from binary black Holes: Tidal effects and remnant properties

We study the properties of remnants formed in prompt-collapse binary neutron star mergers. We consider nonspinning neutron star binaries over a range of total masses and mass ratios across a set of 22 equations of state, totaling 107 numerical relativity simulations. We report the final mass and spin of the systems (including the accretion disk and ejecta) to be constrained in a narrow range—0.98 ≲ 𝑀 𝑓 /𝑀 ≲ 0.99 for the mass and 0.85 ≲ 𝑎 𝑓 ≲ 0.95 for the dimensionless spin—regardless of the binary configuration and matter effects. This sets them apart from binary black hole merger remnants. We assess the detectability of the postmerger signal in a future 40 km Cosmic Explorer observatory and find that the signal-to-noise ratio in the postmerger of an optimally located and oriented binary at a distance of 100 Mpc can range from <1 to 8, depending on the binary configuration and equation of state, with a majority of them greater than 4 in the set of simulations that we consider. We also consider the distinguishability between prompt-collapse binary neutron star and binary black hole mergers with the same masses and spins. We find that Cosmic Explorer will be able to distinguish such systems primarily via the measurement of tidal effects in the late inspiral. Neutron star binaries with reduced tidal deformability $\tilde{Λ}$ as small as ∼ 3.5 can be identified up to a distance of 100 Mpc, while neutron star binaries with $\tilde{Λ}$ ∼ 22 can be identified to distances greater than 250 Mpc. This is larger than the distance up to which the postmerger will be visible. Finally, we discuss the possible implications of our findings for the equation of state of neutron stars from the gravitational wave event GW230529.

79 ASTRONOMY AND ASTROPHYSICS↗

Interplay Between Time and Energy in Bosonic Noisy Quantum Metrology

Quantum entanglement and coherence often allow for protocols that outperform classical ones in estimating a system’s parameter. When using infinite-dimensional probes (such as a bosonic mode), one could, in principle, obtain infinite precision in a finite time for both classical and quantum protocols, which makes it hard to quantify potential quantum advantage. However, such a situation is unphysical, as it would require infinite resources, so one needs to impose some additional constraint: typically the average energy employed by the probe is finite. Here we treat both energy and time as a resource, showing that, in the presence of noise, there is a nontrivial interplay between the average energy and the time devoted to the estimation. Our results are valid for the most general metrological schemes (e.g., adaptive schemes, which may involve entanglement with external ancillae or any kind of continuous measurement). We apply recently derived precision bounds for all parameters characterizing the paradigmatic case of a bosonic mode, subject to Lindbladian noise. We show how the time employed in the estimation should be partitioned in order to achieve the best possible precision. In most cases, the optimal performance may be obtained without the necessity of adaptivity or entanglement with ancilla. We compare results with classical strategies. Interestingly, for temperature estimation, applying a fast-prepare-and-measure protocol with Fock states provides better scaling with the number of photons than any classical strategy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ground calibration plan for the Athena/X-IFU microcalorimeter spectrometer

The X-ray Integral Field Unit is the X-ray imaging spectrometer on board one of ESA’s next large missions, Athena. Athena is set to investigate the theme of the Hot and Energetic Universe, with a launch planned in the late-2030s. Based on a high-sensitivity transition edge sensor (TES) detector array operated at very low temperature (50 mK), X-IFU will provide spatially resolved high-resolution spectroscopy of the X-ray sky in the 0.2 to 12 keV energy band, with an energy resolution goal of 4 eV up to 7 keV [3 eV design goal]. This work presents the current calibration plan of the X-IFU. It provides the requirements applicable to the X-IFU calibration, describes the overall calibration strategy, and details the procedure and sources needed for the ground calibration of each parameter or characteristics of the X-IFU.

47 OTHER INSTRUMENTATION↗

PROTOCALC, a W -band Polarized Calibrator for Cosmic Microwave Background Telescopes: Application to Simons Observatory and CLASS

Current- and next-generation cosmic microwave background (CMB) experiments will measure polarization anisotropies with unprecedented sensitivities. The need for high precision in these measurements underscores the importance of gaining a comprehensive understanding of instrument properties, with a particular emphasis on the study of the beam properties, and especially their polarization characteristics and the measurement of the polarization angle. In this context, a major challenge lies in the scarcity of millimeter polarized astrophysical sources with sufficient brightness and calibration knowledge to meet the stringent accuracy requirements of future CMB missions. This led to the development of a drone-borne calibration source designed for the frequency band centered on approximately 90 GHz, matching a commonly used channel in ground-based CMB measurements. The Prototype Calibrator for Cosmology, PROTOCALC, has undergone thorough in-lab testing, and its properties have been subsequently modeled through simulation software integrated into the standard Simons Observatory analysis pipeline. Moreover, the PROTOCALC system has been tested in the field, having been deployed twice on calibration campaigns with CMB telescopes in the Atacama Desert. The data collected constrain the roll angle of the source with a statistical accuracy of 0$^°_•$045.

79 ASTRONOMY AND ASTROPHYSICS↗

AT2025ulz and S250818k: Zooming in with the Hubble Space Telescope

AT2025ulz is an optical/near-infrared transient discovered during follow-up of the candidate gravitational wave (GW) event S250818k. Its young age (≲1 day), rapid decline, and strong color evolution over the first 48 hr classify it as a potential kilonova candidate. In this work, we present the results of our observing campaign, carried out with the Gran Telescopio Canarias and the Hubble Space Telescope (HST). Although the early time evolution of AT2025ulz resembles some aspects of a kilonova, its rapid onset (∼3 hr after the GW trigger) and luminosity (a factor of ∼5 brighter than AT2017gfo in g band) are difficult to reproduce. Only a small subset of our kilonova models matches its multicolor light curve, and the inferred ejecta mass is uncomfortably large given the low chirp mass (≲0.87 M ⊙ ) of the GW candidate. HST observations place the transient within a nearby (z = 0.08489) spiral galaxy with ongoing star formation and measure a color (F336W − F160W ≈ 1.4 mag) that is too blue to match with a kilonova. Our data support the classification of AT2025ulz as a supernova, initially undergoing a shock-cooling phase and later entering its photospheric phase and spectroscopically identified via its broad absorption features.

79 ASTRONOMY AND ASTROPHYSICS↗

The HTAP_v3.2 emission mosaic: merging regional and global monthly emissions (2000–2020) to support air quality modelling and policies

This study, performed under the umbrella of the Task Force on Hemispheric Transport of Air Pollution (TF-HTAP), responds to the need of the global and regional atmospheric modelling community of having a mosaic emission inventory of air pollutants that conforms to specific requirements: global coverage, long time series, spatially distributed emissions with high time resolution, and a high sectoral resolution. The mosaic approach of integrating official regional emission inventories based on locally reported data, with a global inventory based on a globally consistent methodology, allows modellers to perform simulations of a high scientific quality while also ensuring that the results remain relevant to policymakers. HTAP_v3.2, an ad-hoc global mosaic of anthropogenic inventories, is an update to the HTAP_v3 global mosaic inventory and has been developed by integrating official inventories over specific areas (North America, Europe, Asia including China, Japan and Korea) with the independent Emissions Database for Global Atmospheric Research (EDGAR) inventory for the remaining world regions. The results are spatially and temporally distributed emissions of SO 2 , NO x , CO, NMVOC, NH 3 , PM 10 , PM 2.5 , Black Carbon (BC), and Organic Carbon (OC), with a spatial resolution of 0.1 × 0.1° and time intervals of months and years covering the period 2000–2020 (https://doi.org/10.5281/zenodo.17086684, Crippa, 2025, https://edgar.jrc.ec.europa.eu/dataset_htap_v32, last access: 27 October 2025). The emissions are further disaggregated to 16 anthropogenic emitting sectors. This paper describes the methodology applied to develop such an emission mosaic, reports on source allocation, differences among existing inventories, and best practices for the mosaic compilation. One of the key strengths of the HTAP_v3.2 emission mosaic is its temporal coverage, enabling the analysis of emission trends over the past two decades. The development of a global emission mosaic over such long time series represents a unique product for global air quality modelling and for better-informed policy making, reflecting the community effort expended by the TF-HTAP to disentangle the complexity of transboundary transport of air pollution.

Guizzardi, Diego [European Commission, Ispra (Ital↗

Powder‐to‐Film Conversion of Nickel Single‐Atom Catalysts into Binder‐Free and Resistant Electrodes

Although a few binder-free and self-supported single-atom electrodes have been reported, achieving mechanically robust, defect-engineered, and reproducible films that preserve atomic dispersion under electrochemical operation remains challenging. This work addresses this limitation by presenting a versatile and generalizable strategy to transform powders into standalone, defect-engineered thin films hosting atomically dispersed Ni centers within conductive 2D frameworks. The physicochemical and electronic properties of these materials are thoroughly characterized using a comprehensive set of spectroscopic and microscopic techniques and confirmed the homogeneous dispersion and monoatomic nature of the Ni centers (0.94 wt.%) on the electrode films. Electrochemical testing via cyclic voltammetry and electrochemical impedance spectroscopy under a range of experimental conditions revealed that integration of Ni single atoms markedly enhanced performance and stability compared to carbon nanotube-only electrodes, maintaining integrity after 15 h of continuous operation. This improvement is accompanied by a notable reduction in charge transfer resistance (30.50 Ω) and an increase in double-layer capacitance (295.45 µF). Post-electrochemical analyses corroborated the structural integrity and robustness of the electrodes. Overall, this work bridges atomically precise catalysis and device-level electrochemistry, opening a route toward reproducible and scalable single-atom electrodes for sensing and energy conversion.

36 MATERIALS SCIENCE↗

Quantifying Twist Angles in Cuprate Heterostructures with Anisotropic Raman Signatures

Artificially engineered twisted van der Waals (vdW) heterostructures have unlocked new pathways for exploring emergent quantum phenomena and strongly correlated electronic states. Many of these phenomena are highly sensitive to the twist angle, which can be deliberately tuned to tailor the interlayer interactions. This makes the twist angle a critical tunable parameter, emphasizing the need for precise control and accurate characterization during device fabrication. In particular, twisted cuprate heterostructures based on Bi 2 Sr 2 CaCu 2 O 8 + x (BSCCO) have demonstrated angle-dependent superconducting properties, positioning the twist angle as a key tunable parameter. However, the twisted interface is highly unstable under ambient conditions and vulnerable to damage from conventional characterization tools such as electron microscopy or scanning probe techniques. In this work, a fully non-invasive, polarization-resolved Raman spectroscopy approach is introduced for determining twist angles in artificially stacked BSCCO heterostructures. By analyzing twist-dependent anisotropic vibrational Raman modes, particularly utilizing the out-of-plane A 1g vibrational mode of Bi/Sr at ≈116 cm −1 , clear optical fingerprints of the rotational misalignment between cuprate layers are identified. The high-resolution confocal Raman setup, equipped with polarization control and RayShield filtering down to 10 cm −1 , allows for reliable and reproducible measurements without compromising the material's structural integrity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The structure of high-Mg alkali-bearing aluminosilicate glasses investigated in situ at ambient and high pressure by multi-angle energy dispersive X-ray diffraction and infrared microspectroscopy

The structural properties of synthetic high-Mg alkali-bearing aluminosilicate glasses analogues of natural picritic-to-komatiitic magmas were investigated in situ by multiangle energy dispersive X-ray diffraction at 2.1 GPa and ambient pressure and by Fourier Transform infrared spectroscopy up to 5.4 GPa in a cycle of compression and decompression experiments. Our results show that the intermediate range ordering of the glass structure at 2.1 GPa is 3.14 Å, increasing to 3.19 Å when decompressed. The local structure shows T-O lengths of 1.66 Å (2.1 GPa) and 1.65 Å (ambient pressure), T-T distances of 3.19 Å at high pressure, which lengthen to 3.21 Å at ambient pressure, causing the T-O-T angle of 147° determined at 2.1 GPa to widen to 154° upon decompression. The deconvoluted infrared spectra result in the presence of Q 1 , Q 2 , Q 3 populations in the aluminosilicate spectral region, whose proportions remain relatively unchanged up to 5.4 GPa. The structural response of the investigated glasses to cold-compression does not involve changes in polymerization, but rather a shrinking and compaction of the structure as evidenced by the Qn species shifting to higher wavenumbers as a function of pressure. The structural properties determined from X-ray diffraction for this glass composition are discussed together with those of glasses emerging from previous studies to highlight a compositional dependence mainly dictated by the amount of SiO 2 and Al 2 O 3 .

glass structure↗

OC7 phase I: Toward practical sea-state-dependent modeling of hydrodynamic viscous drag and damping

Here, this article presents a collaborative research campaign under the OC7 project on refining the engineering modeling approach for hydrodynamic viscous drag and damping on floating wind platforms, focusing on the adjustment of hydrodynamic drag and damping coefficients for different sea states. The participant simulation results show significant improvements over the previous OC6 project in predicting the low-frequency resonance motion under nonoperational conditions. The improvements are mainly due to enhanced modeling, including the adoption of wave stretching, and directly tuning the coefficients to measured platform motion in waves instead of free decay. For accurate predictions of mean- and slow-drift motion, the better performing models use a decreasing column splash zone drag coefficient and increasing surge damping/drag with increasing wave height. The model tuning for heave and pitch resonance shows less consistency. Generally, both quadratic drag and additional heave or pitch damping are needed for accurate predictions. Alternatively, a quadratic drag formulation with velocity filtering for the rectangular pontoons leads to improved predictions without additional damping. This model is also potentially more predictive, requiring minimal adjustment to its parameters for different conditions.

17 WIND ENERGY↗

Collins asymmetries for pion-in-jet production in polarized ℓp collisions at the EIC

We study Collins azimuthal asymmetries for pion-in-jet production in polarized lepton-proton collisions, extending previous analyses of polarized pp scattering to a complementary and theoretically simpler process. We keep adopting a simplified transverse momentum dependent (TMD) approach, with a collinear configuration for the initial state, and employ the transversity and Collins fragmentation functions as extracted from semi-inclusive deep inelastic scattering and $e^{+}e^{-}$ annihilation processes. We then compute azimuthal asymmetries for the Electron-Ion Collider (EIC) kinematics, both within a leading order (LO) approach and by including quasireal photon exchange in the Weizsäcker-Williams approximation. Although this contribution is relevant in the whole kinematical range explored, it does not spoil the dominance of quark-initiated channels, leaving only a marginal role to their gluon counterparts. In this respect, Collins asymmetries in lepton-proton processes allow for a much clearer access to the transversity distribution, including its sea-quark component. As we will argue, a comparison with future EIC data could represent a further step in testing the hypothesis of the universality of the Collins function as well as of the TMD factorization for this class of processes.

Azimuthal asymmetries↗

Volatilized Ammonia Supports Subterranean Ecosystems with Unusual Nitrogen Isotopic Signatures

The Frasassi cave system hosts a robust subterranean ecosystem based on microbial lithoautotrophy. Curiously, acidic biofilms forming above degassing sulfidic cave streams, and the invertebrates that feed on them, are extremely depleted in nitrogen-15 (δ 15 N values less than −20‰). In this study, we tested the hypothesis that these low δ 15 N values result from the volatilization, trapping, and uptake of ammonia degassed from circumneutral streams. We found that dissolved ammonium in the streams had δ 15 N values near +3‰, whereas NH 3(g) in the cave atmosphere above streams exhibited δ 15 N values as low as −27‰, consistent with fractionation by NH 3 volatilization. Extremely acidic condensation droplets on cave walls efficiently trapped airborne NH 3 , accumulating up to 4 mM NH 4 + with δ 15 N values as low as −29‰, thereby confirming volatilized and trapped ammonia as the primary N source to cave wall biofilms and the extensive subsurface ecosystem they support. Airborne ammonia trapping represents a novel mechanism for biological N acquisition and provides abundant N for growth in an extreme subsurface environment that otherwise receives very limited nutrient input.

Nitrogen↗

LHCSR1 Functions as a Dimmer Switch for Light Harvesting

In oxygenic photosynthesis, high light leads to a set of photoprotective processes, known as nonphotochemical quenching, that are required for fitness. In moss and algae, the pigment−protein complex, light-harvesting stress-related (LHCSR), is crucial for photoprotection. Acidification of the thylakoid lumen under high light triggers the activation of LHCSR and the conversion of the xanthophyll violaxanthin into zeaxanthin, which is found within LHCSR. These interrelated molecular components combine to turn on a safety valve that dissipates excess energy as heat. Previous studies of detergent-solubilized LHCSR1 found that pH and zeaxanthin regulate distinct quenching sites via the protein conformation. However, protein function in the native membrane environment can be significantly different. In this work, we applied single-molecule fluorescence spectroscopy to LHCSR1 in membrane nanodiscs. The membrane environment enhanced total quenching, regardless of pH or zeaxanthin-binding. pH-dependent quenching was still observed whereas zeaxanthin-dependent quenching was suppressed. Conformational changes also increased in the membrane, establishing that the local environment can change the nature of the equilibrium between light harvesting and photoprotection.

Hoffmann, Madeline P. [Massachusetts Inst. of Tech↗

Charged- and Multi-Exciton Dynamics in Colloidal Quantum Dot Molecules

Multicarrier states in quantum dots are confined to small volumes, resulting in increased nonradiative Auger recombination rates with implications for different optoelectronic applications. Recently, the fusion of two core-shell quantum dots into a dimer has provided a new physical landscape for multiexciton states, since the excitons may share a core (intradot, localized) or occupy different cores (interdot, segregated). Here, in this study, we employ transient absorption spectroscopy to investigate the multiexciton dynamics in coupled quantum dot dimers. We observe that multiexciton populations in the dimers live significantly longer in comparison to the parent monomers, in contrast to the single exciton regime. A kinetic model that accounts for the statistical differences between monomers and dimers reveals that, while intradot multiexcitons show Auger rates similar to the monomers, interdot states have reduced Auger rates. These results pave the way for the rational design of new quantum dot molecules with tailored multiexciton properties.

Auger recombination↗

Regio- and Stereoselective Lactone Polymerization: Divergent Effect of Catalyst Modification and Monomer Structure

Selective ring-opening polymerization (ROP) of chiral lactones enables access to biodegradable polyesters with precisely controlled microstructures. Here, combined DFT modeling and experimental validation elucidate how fine-tuning of enantiopure SalBinam aluminum catalysts (through introduction of bromine atoms and tert-butyl groups, respectively, in ortho- and para-positions) modulates regio- and stereocontrol in the ROP of methyl glycolide (MeG) and lactide (LA). Computations reveal that regioselectivity in MeG polymerization arises mainly from steric repulsion, with a small contribution from weak stabilizing C-H···Br interactions that favor ring-opening at the glycolic site, consistent with the experimentally enhanced regioselectivity for (R)-MeG. In contrast, the same steric congestion at the ligand’s ortho positions destabilizes the key transition states in rac-LA polymerization, reducing the calculated stereoselectivity. Experiments confirm the predicted loss of stereocontrol, yielding nearly atactic PLA under standard conditions. Extension of the computational framework to rac-MeG polymerization promoted by racemic catalyst identified a low-barrier, stepwise polymer chain exchange pathway that rationalizes the experimentally observed syndiotacticity of poly(lactic-co-glycolic acid).

DFT calculations↗

Electrical switching of a p-wave magnet

Magnetic states with zero magnetization but non-relativistic spin splitting are outstanding candidates for the next generation of spintronic devices. Their electronvolt (eV)-scale spin splitting, ultrafast spin dynamics and nearly vanishing stray fields make them particularly promising for several applications. A variety of such magnetic states with non-trivial spin textures have been identified recently, including even-parity d-wave, g-wave or i-wave altermagnets and odd-parity p-wave magnets. Achieving voltage-based control of the non-uniform spin polarization of these magnetic states is of great interest for realizing energy-efficient and compact devices for information storage and processing. Spin-spiral type II multiferroics are optimal candidates for such voltage-based control, as they exhibit an inversion-symmetry-breaking magnetic order that directly induces ferroelectric polarization, allowing for symmetry-protected cross-control between spin chirality and polar order. Here we combine photocurrent measurements, first-principles calculations and group-theory analysis to provide direct evidence that the spin polarization of the spin-spiral type II multiferroic NiI 2 exhibits odd-parity character connected to the spiral chirality. The symmetry-protected coupling between chirality and polar order enables electrical control of a primarily non-relativistic spin polarization. Our findings represent an observation of p-wave magnetism in a spin-spiral type II multiferroic, which may lead to the development of voltage-based switching of non-relativistic spin polarization in compensated magnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The dynamical state of eROSITA clusters and its impact on the brightest cluster galaxy luminosity

The first Spectrum-Roentgen-Gamma (SRG) eROSITA public release contains 12 247 clusters and groups from its first 6 months of operation. We used the offset between the brightest cluster galaxy (BCG) and the X-ray peak ( D BCG − X ) to classify the cluster dynamical state of 3946 galaxy clusters and groups. We aim to investigate the evolution of the merger and relaxed cluster distributions with redshift and mass, and the distributions’ impact on the BCG. We used the X-ray peak from the eROSITA survey and the BCG position from the LS DR10 optical data, which includes the DECam eROSITA Survey optical data, to measure the D BCG − X offset. We modelled the distribution of D BCG − X , in units of R 500 , as the sum of two Rayleigh distributions representing the cluster’s relaxed and disturbed populations, and explored their evolution with redshift and mass. To explore the impact of the cluster’s dynamical state on the BCG luminosity, we separated the main sample according to the dynamical state. We defined clusters as relaxed if D BCG − X < 0.25R500, disturbed if D BCG − X > 0.5R500, and ‘diverse’ if 0.25R500 < D BCG − X < 0.5R500. We find no evolution of the merging fraction with redshift or mass. The width of the relaxed distribution increases with redshift, while the width of the two Rayleigh distributions decreases with mass. The analysis reveals that BCGs in relaxed clusters are brighter than BCGs in both the disturbed and diverse cluster populations. The most significant differences are found for high-mass clusters at higher redshifts. The results suggest that BCGs in low-mass clusters are less centrally bound than those in high-mass systems, irrespective of the dynamical state. Over time, BCGs in relaxed clusters progressively align with the potential centre. This alignment correlates with their luminosity growth relative to BCGs in dynamically disturbed clusters, underscoring the critical role of the cluster’s dynamical state in regulating BCG evolution.

galaxy clusters↗