Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inflatable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Magnetospheric-field distortions observed by OGO 3 and 5.

The rubidium vapor magnetometer data of the scalar magnetic-field intensity obtained by the OGO 3 and 5 satellites are analyzed to study the magnetospheric-field distortions in terms of the observed field magnitude under quiet and slightly disturbed conditions minus the magnitude of the reference geomagnetic field (delta B). Average contours of equal delta Bs are shown in the geomagnetic noon-midnight and dawn-dusk meridian planes for magnetically quiet and slightly disturbed conditions. The equatorial distribution of observed delta Bs as a function of geocentric distance differs substantially from that expected from the well-known models of the quiet-time ring current. Other findings suggest that there must be a population of low-energy particles with substantial total energy near the equator at distances of 2 to 5 earth radii that has not been recognized as having sufficient energy to inflate the magnetic field.

Sugiura, M.↗

Magnetospheric substorms in the distant magnetotail observed by Imp 3.

Study of variations of the magnetic field and plasma sheet in the distant magnetotail (20 to 40 earth radii) during magnetospheric substorms on the basis of the Imp 3 magnetic-field and particle data. Depending on the locations of the satellite with respect to the boundary of the plasma sheet, the variations differ greatly. However, the present results and the results of other workers give a clear indication of an increase of the magnitude of the field outside the plasma sheet and of the simultaneous ?thinning' of the plasma sheet during an early phase of substorms. At about the maximum epoch or during the recovery phase of substorms, the plasma sheet expands and appears to be inflated to at least the presubstorm level. Furthermore, a large excessive flux of the magnetic (approximately equal to Z component) field, as compared with the flux of the original dipole field, appears across the neutral sheet.

Meng, C. I.↗

Stresses, strains, and surface pressures in the lung caused by its weight.

In an effort to understand how the lung is deformed by its own weight, we have analyzed the distribution of regional expansion, stresses, and surface pressures in a theoretical elastic lung-shaped model using the technique of finite elements. In the upright position, the parenchyma was most expanded at the apex and least at the base. Stresses in both the vertical and lateral directions were maximal at the apex. As the lung was inflated from very low volumes to total lung capacity, parenchymal expansion and stress at the apex first decreased, then increased. This behavior can be explained by the increasing rigidity of the expanded lung which enabled it to resist distortion by its own weight. At functional residual capacity, the stress at the apex was near its minimum. The differences in intrapleural pressure down the lung were volume dependent, increasing at very low volumes. In the inverted lung, the regional differences in stress, strain, and surface pressures were less marked because of the shape of the chest.

West, J. B.↗

Force-free magnetic-field structures and their role in solar activity.

Magnetic-field structures in solar active regions are expected to be substantially force-free. A method is proposed for calculating such structures by numerical methods. The method is applied to the study of the magnetic-field pattern associated with a sunspot of one polarity surrounded by a magnetic region of opposite polarity when the sunspot rotates with respect to the surrounding region. Rotation introduces a toroidal component of magnetic field, and the associated pressure leads to inflation of the magnetic field pattern. If the differential rotation exceeds about 180 deg, the force-free magnetic field has energy greater than that of an open magnetic-field configuration with the same photospheric boundary conditions. It is concluded that, beyond this point, the force-free field structure is metastable and can be converted into an open field structure by an explosive MHD instability.

Barnes, C. W.↗

Manufacture of large, lightweight parabolic antennas

Antenna was produced in segments. Parabole sections were built up as aluminum foil sandwich with core bonded by film adhesive; whole structure was oven-cured after assembly. Structure was assembled with special tool for splice-bonding segments into complete dish, and inflatable bladder to apply pressure at joints during cure.

Hooper, S. W.↗

An evaluation of some unbraked tire cornering force characteristics

An investigation to determine the effects of pavement surface condition on the cornering forces developed by a group of 6.50x13 automobile tires of different tread design was conducted at the Langley aircraft landing loads and traction facility. The tests were made at fixed yaw angles of 3,4.5, and 6 deg at forward speeds up to 80 knots on two concrete surfaces of different texture under dry, damp, and flooded conditions. The results showed that the cornering forces were extremely sensitive to tread pattern and runway surface texture under all conditions and that under flooded conditions tire hydroplaning and complete loss of cornering force occurred at a forward velocity predicted from an existing formula based on tire inflation pressure. Futher, tests on the damp concrete with a smooth tire and a four-groove tire showed higher cornering forces at a yaw angle of 3 deg than at 4.5 deg; this indicated that maximum cornering forces are developed at extremely small steering angles under these conditions.

Leland, T. J. W.↗

Apollo experience report: Command module uprighting system

A water-landing requirement and two stable flotation attitudes required that a system be developed to ensure that the Apollo command module would always assume an upright flotation attitude. The resolution to the flotation problem and the uprighting concepts, design selection, design changes, development program, qualification, and mission performance are discussed for the uprighting system, which is composed of inflatable bags, compressors, valves, and associated tubing.

White, R. D.↗

Transequatorial effects of sea surface temperature anomalies in a global general circulation model

The global response of the atmosphere to a persistent anomalous pool of warm sea surface temperatures in the extratropical Pacific Ocean is examined in terms of the meridional pole-to-pole profile of the zonally-averaged 600 mb surface for periods up to 90 days. Following an initial hydrostatic inflation of the isobaric surface in the latitude of the warm pool, effects spread poleward within the hemisphere, then begin to appear after about two to three weeks in high latitudes of the opposite hemisphere, but with little or no response in the tropics. The same sea temperature anomaly field generates a stronger response in winter than in summer, and a very different reaction when located in the Southern Hemisphere than when in the Northern Hemisphere.

Spar, J.↗

Investigation of extendable nozzle concepts

Preliminary research and technology were performed toward the development of a transpiration cooled inflatable nozzle extension. The J-2 engine of the Saturn-Apollo launch vehicle was selected as a design application test bed to provide realistic operational parameters and a possible hot firing demonstration. The nozzle extension attached at the 27.5 to 1 area ratio of the basic J-2 nozzle exit and extended to an area ratio of 48 to 1. The final nozzle extension design as evolved during this effort utilized conically woven stainless steel airmat as the major construction material. Model and full scale nozzle extensions were fabricated and tested although an actual J-2 hot firing demonstration was not possible due to the lack of a proper altitude test opportunity.

Scott, C. N.↗

Some effects of grooved runway configurations on aircraft tire braking traction under flooded runway conditions

An experimental investigation was conducted to study the effect of grooved runway configurations on aircraft tire braking traction on flooded runway surfaces. The investigation was performed, utilizing size 49 x 17, type VII, aircraft tires with an inflation pressure of 170 lb per square inch at ground speeds up to approximately 120 knots. The results of this investigation indicate that when the runway is flooded, grooved surfaces provide better braking traction than an ungrooved surface and, in general, the level of braking traction was found to improve as the tire bearing pressure was increased because of an increase in the groove area of either the surface or the tire tread. Rounding the groove edges tended to degrade the tire braking capability from that developed on the same groove configuration with sharp edges. Results also indicate that braking friction coefficients for the test tires and runway surfaces decreased as ground speed was increased because of the hydroplaning effects.

Byrdsong, T. A.↗

Cost estimation for unmanned lunar and planetary programs

A basic model is presented for estimating the cost of unmanned lunar and planetary programs. Cost data were collected and analyzed for eight lunar and planetary programs. Total cost was separated into the following components: labor, overhead, materials, and technical support. The study determined that direct labor cost of unmanned lunar and planetary programs comprises 30 percent of the total program cost. Twelve program categories were defined for modeling: six spacecraft subsystem categories (science, structure, propulsion, electrical power, communications, and guidance and integration, test and quality assurance, launch and flight operations, ground equipment, systems analysis and engineering, and program management). An analysis showed that on a percentage basis, direct labor cost and direct labor manhours compare on a one-to-one ratio. Therefore, direct labor hours is used as the parameter for predicting cost, with the advantage of eliminating the effect of inflation on the analysis.

Dunkin, J. H.↗

Engineering design manual of parachute decelerator characteristics for space shuttle solid rocket booster recovery

The design criteria and characteristics of parachutes for recovery of the solid rocket boosters used with the space shuttle launch are presented. A computer program for analyzing the requirements of the parachute decelerators is described. The computer inputs for both the drogue and main parachute decelerators are; (1) parachute size, (2) deployment conditions, (3) inflation times, (4) reefing times, (5) mass properties, (6) spring properties, and (7) aerodynamic coefficients. Graphs of the parachute performance are included.

Mansfield, D. L.↗

Fore and aft elastic response characteristics of size 34x9.9, type 7, 14 ply-rated aircraft tires of bias ply, bias belted, and radial belted design

An investigation was conducted to determine the fore-and-aft elastic response characteristics of aircraft tires of bias ply, bias-belted, and radial-belted design. The investigation consisted of: (1)static and rolling tests, (2)a statistical analysis which related the measured tire elastic characteristics to variations in the vertical load, inflation pressure, braking force and/or tire vertical deflection, and (3) a semi-empirical analysis which related the tire elastic behavior to measured wheel slippage during a steady-state braking. The results of this investigation indicate that the bias-belted tire has the largest spring constant value for most loading conditions and the radial-belted tire has the smallest spring constant value.

Tanner, J. A.↗

The ring current.

The topology of delta-B (i.e., the observed scalar magnetic field intensity minus a scalar reference field intensity) in the magnetosphere has been established by the Rb magnetometer observations on OGO's 3 and 5. This delta-B topology provides a convenient framework, on the basis of which the complex features found by the earlier magnetic field observations made by Explorers 10, 12, 14, 26 and Electron 2 can be reinterpreted to fit a unified simple picture of the magnetospheric field distortions including the inflation of the equatorial magnetosphere by the ring current. It is proposed that the quiet-time ring current consists of two parts, the inner ring current imbedded deeply inside the plasmapause and the outer ring current flowing in the plasma sheet.

Sugiura, M.↗

Effect of suspension-line viscous damping on parachute opening load amplification.

A digital computer program was used to investigate the effects of suspension-line viscous damping on the opening loads of a high-altitude parachute system having a specified configuration. It was found (1) that the nonlinear elastic characteristics of the suspension system produce an amplification of the opening load when the viscous damping is negligible, (2) that the load amplification is markedly reduced when the suspension-line viscous damping coefficient is increased, and (3) that the suspension-line viscous damping is an important parameter of opening load amplification for high-velocity parachute inflations.

Poole, L. R.↗

Meteoroid-detector deployment and pressurization systems

The Explorer 46 Meteoroid Technology Satellite (MTS) launched from Wallops Island, Va., August 13, 1972, was configured to fit within the Scout heat shield, 86.36 cm in diameter. In order to package within this envelope, the meteoroid bumper detector panels had to be rolled up unpressurized and secured to the spacecraft main structure. After the spacecraft was placed in orbit the panels were unrolled by a deployment system and inflated by a pressurization system.

Halliday, H. C.↗

Lightweight tire concept for space shuttle

Various tests were conducted on a 49x17/26 PR aircraft tire that had been designed as a lightweight tire for use on the C-5A military transport. This tire is approximately 25 per cent lighter than a tire of the same size and ply rating that would be used in commercial airline service. The tires were tested at 40 per cent, 37 per cent, and 35 per cent deflections. These deflections were obtained by adjusting the inflation pressure while the load on the tire remained constant at 60,000 pounds. It was determined that the tire would operate successfully under the test conditions at 35% deflection. Prior to testing, the tires were subjected to conditions of high vacuum and low temperature. It was determined that the tires were not adversely affected by these conditions.

Shufflebotham, W. T.↗

Review of drag measurements from flight tests of manned aircraft with comparisons to wind-tunnel predictions

In-flight studies of the overall and local components of drag of many types of aircraft were conducted. The primary goal of these studies was to evaluate wind-tunnel and semiempirical prediction methods. Some evaluations are presented in this paper which may be summarized by the following observations: Wind-tunnel predictions of overall vehicle drag can be accurately extrapolated to flight Reynolds numbers, provided that the base drag is removed and the boattail areas on the vehicle are small. The addition of ablated roughness to lifting body configurations causes larger losses in performance and stability than would be expected from the added friction drag due to the roughness. Successful measurements of skin friction have been made in flight to Mach numbers above 4. A reliable inflatable deceleration device was demonstrated in flight which effectively stabilizes and decelerates a lifting aircraft at supersonic speeds.

Pyle, J. S.↗