Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Grain Growth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Transport and optical properties of the chiral semiconductor Ag 3 AuSe 2

Previous band structure calculations predicted Ag 3 AuSe 2 to be a semiconductor with a band gap of approximately 1 eV. Here, we report single crystal growth of Ag 3 AuSe 2 and its transport and optical properties. Single crystals of Ag 3 AuSe 2 were synthesized by slow-cooling from the melt, and grain sizes were confirmed to be greater than 2 mm using electron backscatter diffraction. Optical and transport measurements reveal that Ag 3 AuSe 2 is a highly resistive semiconductor with a band gap and activation energy around 0.3 eV. Our first-principles calculations show that the experimentally determined band gap lies between the predicted band gaps from GGA and hybrid functionals. We predict band inversion to be possible by applying tensile strain. The sensitivity of the gap to Ag/Au ordering, chemical substitution, and heat treatment merit further investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Damage Tolerance Assessment of Laser Clad Repairs of Coarse Grain Ti-6Al-4V

Background: Laser cladding offers a promising approach to repairing aviation components, with the ability to restore the geometric shape and the static and fatigue strength. Objective: The damage tolerance of a coarse grain Ti-6Al-4 V material is assessed via three sets of samples: (i) baseline, (ii) laser clad repaired, and (iii) laser cladding followed by heat treatment. Method: The specimens were subjected to fatigue loading using a marker band technique, in which cracks initiated from pre-defined laser slots and the small crack growth rates were measured by quantitative fractography. Additional characterization was performed on these samples, including hardness measurements, microstructure analysis, and multimodal residual stress analyses. Results: The region of the specimen undergoing laser cladding exhibited higher hardness values and a compressive residual stress, based on the slitting method. The samples subjected to heat treatment after cladding displayed negligible differences in grain size and minimal residual stress relaxation. Conclusions: The results demonstrated significant variability, with data demonstrating that cracks in the laser clad region (exhibiting the largest compressive residual stress) grew faster than cracks in the substrate region of the sample or in the baseline cases. Finally, these counterintuitive results are rationalized with additional analyses from synchrotron-based energy dispersive X-ray diffraction and high energy X-ray diffraction, demonstrating significant spatial variability in the residual elastic strains in the millimeter-sized prior β grains within the material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Early self-organization of fission gas bubble superlattice formation in neutron-irradiated monolithic U-10Mo fuels

Self-organization of defect superlattices in far-from-equilibrium systems presents a promising way to mitigate swelling concerns in nuclear materials. The gas bubble superlattice (GBS) is a highly ordered, three-dimensional complex defect structure that can retain fission gasses in Uranium-Molybdenum (U-Mo) fuels. Transmission electron microscopy (TEM) investigation of monolithic U-10Mo fuel irradiated to 1.15 × 10 21 fissions/cm 3 and 1.30 × 10 21 fissions/cm 3 revealed that early-stage ordering preferentially occurs at the grain boundaries (GB) and that the critical bubble size for complete ordering is ~3 nm. Once formed at the GB, the GBS extends towards the grain interior; however, the spread in distance from the GB varies likely depending on the type and strength of the GB sink. TEM results also showed a possible correlation between the growth and evolution of the intragranular disordered bubbles and large dislocation networks. The fission product distribution in and outside of the GBS was also investigated confirming the presence of xenon in the GBS, as well as other fission products including cesium, barium, lanthanum, and cerium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2014

Behavior of Particle Depots in Molten Silicon During Float-Zone Growth in Strong Magnetic Fields

Solar cells made from directionally solidified silicon cover 57% of the photovoltaic industry's market [1]. One major issue during directional solidification of silicon is the precipitation of foreign phase particles. These particles, mainly SiC and Si3N4, are precipitated from the dissolved crucible coating, which is made of silicon nitride, and the dissolution of carbon monoxide from the furnace atmosphere. Due to their hardness and size of several hundred micrometers, those particles can lead to severe problems during the wire sawing process for wafering the ingots. Additionally, SiC particles can act as a shunt, short circuiting the solar cell. Even if the particles are too small to disturb the wafering process, they can lead to a grit structure of silicon micro grains and serve as sources for dislocations. All of this lowers the yield of solar cells and reduces the performance of cells and modules. We studied the behaviour of SiC particle depots during float-zone growth under an oxide skin, and strong static magnetic fields. For high field strengths of 3T and above and an oxide layer on the sample surface, convection is sufficiently suppressed to create a diffusive like regime, with strongly dampened convection [2, 3]. To investigate the difference between atomically rough phase boundaries and facetted growth, samples with [100] and [111] orientation were processed.

Jauss, T.↗
DOE OSTI2021

Role of crystallographic orientation on intragranular void growth in polycrystalline FCC materials

In this study, we study the effect of crystallographic orientation and applied triaxiality on the growth of intragranular voids. Two 3D full-field micromechanics methods are used, the dilatational visco-plastic fast-Fourier transform (DVP-FFT) and the crystal plasticity Finite Elements (CP-FE), both of which incorporate a combination of crystalline plasticity and dilatational plasticity. We demonstrate with several select cases that predictions of void growth from both formulations agree qualitatively. With the more computationally efficient DVP-FFT, additional effects of polycrystalline microstructure and the influence of nearest neighborhood are investigated. Crystals bearing a single intracrystalline void are studied in three types of 3D microstructural environments: isolated single crystals, individual equal-sized grains within a regular polycrystal, and individual variable sized grains within a polycrystal with grains and voids randomly located. We show that loading type plays a significant role. In strain-rate controlled conditions, voids in the hardest [111]-crystals grow the fastest in time, whereas in stress-controlled conditions, voids in the softest [100]-crystal grow the fastest in time. The analysis reveals that on average void growth is slower for the same starting orientation in the polycrystal than in the single crystal. We find that at the highest triaxiality tested that the correlation between crystal orientation and void growth rate in the polycrystal strengthens, drawing closer to that seen in the isolated single crystals. These results and model can help guide the microstructural design of polycrystalline materials with high strength and damage-tolerance in high-rate deformation.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Flight 1 technical report for experiment 74-36: Thermal migration of bubbles and their interaction with solidification interfaces

Specimens of gas saturated carbon tetrabromide were directionally solidified in a transparent furnace using a gradient freeze technique. The original temperature gradient was 5 C/cm and the cooling rate was 40 C/h. Progress of the experiment was monitored photographically. Gas bubbles were generated at the advancing solidification front in each of the three specimens. The gas bubbles were observed to increase in size, coalesce, and eventually be grown into the solid specimen under low gravity conditions. No bubble detachment from the interface was observed. Identical specimens processed in the laboratory showed bubble nucleation, bubble growth, and eventual bubble detachment due to buoyancy forces. Examination of the specimens showed a significantly greater void content in the low gravity processed samples. The grain size was observed to be finer in the low gravity processed samples.

Papazian, J. M.↗
NASA NTRS1989

Dust coagulation in ISM

Coagulation is an important mechanism in the growth of interstellar and interplanetary dust particles. The microphysics of the coagulation process was theoretically analyzed as a function of the physical properties of the coagulating grains, i.e., their size, relative velocities, temperature, elastic properties, and the van der Waal interaction. Numerical calculations of collisions between linear chains provide the wave energy in individual particles and the spectrum of the mechanical vibrations set up in colliding particles. Sticking probabilities are then calculated using simple estimates for elastic deformation energies and for the attenuation of the wave energy due to absorption and scattering processes.

Chokshi, Arati↗
NASA NTRS2001

In Situ Monitoring of Crystal Growth Using Mephisto

Experiments were carried out to study the morphological stability of Bi-1atomic% Sn alloys using the MEPHISTO directional solidification apparatus aboard Space Shuttle Columbia (STS-87, launched November 19, 1997). The research program involved collaboration of the University of Florida, Centre National d'Etudes Spatiales (France), NASA/Glenn Research Center, the National Institute of Standards and Technology, and the University of New South Wales (Australia). The experiments made use of the Seebeck technique to measure the interface temperature, the resistance change across the sample for determination of the interface velocity, and Peltier current pulsing for demarcation of the interface shape. These data were obtained in real-time during various melting/solidification cycles, and the experiments were controlled via telecommands. The Seebeck signal and temperature measurements in the space experiments, as well as morphological behavior of the solid/liquid interface, were found to be significantly different than those obtained from ground-based studies. For the space-based experiments, interface breakdown was observed at growth velocities of 6.7, 27, and 40 micrometers/s, but not at 1.8 and 3.3 micrometers/s. The results further indicate that the morphological stability threshold for some grain orientations is significantly enhanced, resulting in a staggered planar to cellular transition front. This report summarizes some of these findings.

Abbaschian, Reza↗
NASA NTRS2015

Insulation Resistance Degradation in Ni-BaTiO3 Multilayer Ceramic Capacitors

Insulation resistance (IR) degradation in Ni-BaTiO3 multilayer ceramic capacitors has been characterized by the measurement of both time to failure and direct-current (DC) leakage current as a function of stress time under highly accelerated life test conditions. The measured leakage current-time dependence data fit well to an exponential form, and a characteristic growth time SD can be determined. A greater value of tau(sub SD) represents a slower IR degradation process. Oxygen vacancy migration and localization at the grain boundary region results in the reduction of the Schottky barrier height and has been found to be the main reason for IR degradation in Ni-BaTiO3 capacitors. The reduction of barrier height as a function of time follows an exponential relation of phi (𝑡)=phi (0)e(exp -2Κt), where the degradation rate constant 𝐾=𝐾o𝑒(𝐸𝑘/𝑘𝑇) is inversely proportional to the mean time to failure (MTTF) and can be determined using an Arrhenius plot. For oxygen vacancy electromigration, a lower barrier height phi(0) will favor a slow IR degradation process, but a lower phi(0) will also promote electronic carrier conduction across the barrier and decrease the insulation resistance. As a result, a moderate barrier height phi(0) (and therefore a moderate IR value) with a longer MTTF (smaller degradation rate constant 𝐾) will result in a minimized IR degradation process and the most improved reliability in Ni-BaTiO3 multilayer ceramic capacitors.

dielectric degradation↗
DOE OSTI2023

Non‐Linear Kinetics of The Lithium Metal Anode on Li 6 PS 5 Cl at High Current Density: Dendrite Growth and the Role of Lithium Microstructure on Creep

Abstract Interfacial instability, viz., pore formation in the lithium metal anode (LMA) during discharge leading to high impedance, current focusing induced solid–electrolyte (SE) fracture during charging, and formation/behaviour of the solid–electrolyte interphase (SEI), at the anode, is one of the major hurdles in the development of solid‐state batteries (SSBs). Also, understanding cell polarization behaviour at high current density is critical to achieving the goal of fast‐charging battery and electric vehicle. Herein, via in situ electrochemical scanning electron microscopy (SEM) measurements, performed with freshly deposited lithium microelectrodes on transgranularly fractured fresh Li6PS5Cl (LPSCl), the LiǀLPSCl interface kinetics are investigated beyond the linear regime. Even at relatively small overvoltages of a few mV, the LiǀLPSCl interface shows non‐linear kinetics. The interface kinetics possibly involve multiple rate‐limiting processes, i.e., ion transport across the SEI and SE|SEI interfaces, as well as charge transfer across the LiǀSEI interface. The total polarization resistance R P of the microelectrode interface is determined to be ≈ 0.8 Ω cm 2 . It is further shown that the nanocrystalline lithium microstructure can lead to a stable LiǀSE interface via Coble creep along with uniform stripping. Also, spatially resolved lithium deposition, i.e., at grain surface flaws, grain boundaries, and flaw‐free surfaces, indicates exceptionally high mechanical endurance of flaw‐free surfaces toward cathodic load (>150 mA cm −2 ). This highlights the prominent role of surface defects in dendrite growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

cm 2 -Scale Synthesis of MoTe 2 Thin Films with Large Grains and Layer Control

Owing to the small energy differences between its polymorphs, MoTe 2 can access a full spectrum of electronic states from the 2H semiconducting state to the 1T' semimetallic state and from the T d Weyl semimetallic state to the superconducting state in the 1T' and T d phase at low temperature. Thus, it is a model system for phase transformation studies as well as quantum phenomena such as the quantum spin Hall effect and topological superconductivity. Careful studies of MoTe 2 and its potential applications require large-area MoTe 2 thin films with high crystallinity and thickness control. Here, we present cm 2 -scale synthesis of 2H-MoTe 2 thin films with layer control and large grains that span several microns. Layer control is achieved by controlling the initial thickness of the precursor MoO x thin films, which are deposited on sapphire substrates by atomic layer deposition and subsequently tellurized. Despite the van der Waals epitaxy, the precursor–substrate interface is found to critically determine the uniformity in thickness and grain size of the resulting MoTe 2 films: MoTe 2 grown on sapphire show uniform films while MoTe 2 grown on amorphous SiO 2 substrates form islands. Furthermore, this synthesis strategy decouples the layer control from the variabilities of growth conditions for robust growth results and is applicable to growing other transition-metal dichalcogenides with layer control.

2D materials↗
NASA NTRS1988

Crystal growth of CdTe in space and thermal field effects on mass flux and morphology

The primary, long-range goals are the development of vapor phase crystal growth experiments, and the growth of technologically useful crystals in space. The necessary ground-based studies include measurements of the effects of temperature variations on the mass flux and crystal morphology in vapor-solid growth processes. For in-situ mass flux measurements dynamic microbalance techniques will be employed. Crystal growth procedures and equipment will be developed to be compatible with microgravity conditions and flight requirements. Emphasis was placed on the further development of crystal growth and the investigation of relevant transport properties of CdTe. The dependence of the mass flux on source temperature was experimentally established. The CdTe synthesis and pretreatment procedures are being developed that yield considerable improvements in mass transport rates, and mass fluxes which are independent of the amount of source material. A higher degree of stoichiometric control of CdTe than before was achieved during this period of investigation. Based on this, a CdTe crystal growth experiment, employing physical vapor transport, yielded very promising results. Optical microscopy and X-ray diffraction studies revealed that the boule contained several large sized crystal grains of a high degree of crystallinity. Further characterization studies of CdTe crystals are in progress. The reaction chamber, furnace dimensions, and ampoule location of the dynamic microbalance system were modified in order to minimize radiation effects on the balance performance.

Wiedemeier, H.↗
NASA NTRS1991

Comparison of dynamic fatigue behavior between SiC whisker-reinforced composite and monolithic silicon nitrides

The dynamic fatigue behavior of 30 vol percent silicon nitride whisker-reinforced composite and monolithic silicon nitrides were determined as a function of temperature from 1100 to 1300 C in ambient air. The fatigue susceptibility parameter, n, decreased from 88.1 to 20.1 for the composite material, and from 50.8 to 40.4 for the monolithic, with increasing temperature from 1100 to 1300 C. A transition in the dynamic fatigue curve occurred for the composite material at a low stressing rate of 2 MPa/min at 1300 C, resulting in a very low value of n equals 5.8. Fractographic analysis showed that glassy phases in the slow crack growth region were more pronounced in the composite compared to the monolithic material, implying that SiC whisker addition promotes the formation of glass rich phases at the grain boundaries, thereby enhancing fatigue. These results indicate that SiC whisker addition to Si3 N4 matrix substantially deteriorates fatigue resistance inherent to the matrix base material for this selected material system.

Choi, Sung R.↗
NASA NTRS1994

Conditions in the z = 0.692 absorber toward 3CR 286

We present Hubble Space Telescope/Faint Object Spectrograph (HST/FOS) ultraviolet and ground-based optical spectra of the z = 0.692 21 cm absorption system in the quasi-stellar object (QSO) 3CR 286. The strength of the damped Lyman-alpha absorption implies an H I column density, N(H I) approximately 2 x 10(exp 21)/sq cm. We derive a high spin temperature for the H I gas, T(sub s) greater than or approximately equal to 10(exp 3) K, as has been found for other high-redshift 21 cm absorbing systems; at least 80% of the H I is hotter than 1200 K. Curve-of-growth analysis yields Mg(+) and Fe(+) abundances which are approximately 1-2 dex below solar values; the Ca(+) abundance is even lower implying some depletion onto dust grains. The H2 fraction is not high. We speculate that the high inferred T(sub s) for the gas may reflect continuing active star formation at the 5-8 Gyr look-back time to the absorbing galaxy.

Cohen, Ross D.↗
DOE OSTI2021

Three-Dimensional Free Gas Flow Focuses Basin-Wide Microbial Methane to Concentrated Methane Hydrate Reservoirs in Geological System

Here, we present a systematic model that links the generation, migration, phase partitioning, and accumulation of methane into a closed loop as the sediment is deposited from the seafloor and buried through the base of hydrate stability zone (BHSZ). In our model, methane is generated by biodegradation of organic carbon in muds. Hydrate does not form and methane is not trapped until a coarse-grained layer is deposited, because the small pores prevent hydrate formation in muds. Instead, methane diffuses into sands/silts where methane solidifies into hydrate. As hydrate-bearing sands/silts pass through the BHSZ during sediment burial, methane hydrate dissociates, and releases free gas. The released and the newly generated free gas below the BHSZ concentrates into a vertical/dipping zone with low capillary entry pressure and high permeability and flows upward driven its buoyancy. When free gas reaches the hydrate stability zone (HSZ), capillary forces drive free gas to flow laterally, preferentially enter sands/silts, feed hydrate growth, and elevate hydrate saturation. With three-dimensional focused free gas flow, microbial methane that is generated from a much larger fetch area of the entire basin, both above and below the BHSZ, is concentrated into coarse-grained layers at structural closures for hydrate formation. Our model illustrates how geological evolution, microbial methane generation, and gas flow by buoyancy couple to generate concentrated hydrate deposits in geological system. These insights can be used to explore for high-concentration methane hydrate and are important for understanding the methane budget and carbon cycle under the seafloor.

58 GEOSCIENCES↗
DOE OSTI2024

Unveiling the nucleation and growth of Zr oxide precipitates in internally oxidized Nb3Sn superconductors

We report on atomic-scale analyses of nucleation and growth of Zr oxide precipitates and the microstructural evolution of internally oxidized Nb3Sn wires for high-field superconducting magnet applications, utilizing atom probe tomography (APT), transmission electron microscopy (TEM), and first-principles calculations. APT analyses reveal that oxygen and zirconium are already segregated at grain boundaries (GBs) in the unreacted Nb-1Zr-4Ta (at%) alloy prior to forming Nb3Sn through reacting the Nb alloy with Sn and SnO2. After forming Nb3Sn, Zr oxide precipitates nucleate both at the Nb3Sn/Nb heterophase interfaces and in the Nb3Sn grains, driven by the small solubilities of Zr and O in Nb3Sn compared to their value in Nb. A high number density (Nv) of Zr oxide nanoprecipitates is observed in the Nb3Sn layers, ∼10 23 m −3 , with a mean diameter <10 nm for a heat treatment at 625 °C. Quantitative APT and TEM analyses of the Zr oxide precipitates in the reacted Nb3Sn layers elucidate details of the nucleation, growth, and coarsening processes of the Zr oxide precipitates in Nb3Sn. First-principles calculations and classical nucleation theory are employed to study the nucleation of Zr oxide precipitates in Nb3Sn and to estimate the maximum energy barrier and critical radius for nucleation. Our research unveils the kinetic pathways for nucleation and growth of Zr oxide precipitates and the microstructural evolution of Nb3Sn layers, which helps to understand and improve the superconducting properties of internally oxidized Nb3Sn wires for use in high-field superconducting magnets. •We investigated the nucleation and growth of Zr oxide nanoprecipitates in Nb3Sn superconductors for magnet applications.•APT and TEM analyses reveals the nucleation and growth process of Zr oxide precipitates in Nb3Sn layers.•Classical nucleation theory with DFT is employed to describe the nucleation process of Zr oxide precipitates in Nb3Sn.•We find that the interfacial reactions at Nb/Nb3Sn interface play a critical role in the nucleation of Zr oxide precipitates.•Current study provides a pathway to improve the properties of internally oxidized Nb3Sn superconducting wires.

43 PARTICLE ACCELERATORS↗