SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
New low-temperature procedure used to deposit ohmic gold contacts on gallium arsenide epitaxial films, forming ohmic electrical contacts. Keeping wafer in vacuum until metallization prevents formation of rectifying contacts.
A photometer developed to characterize lightning from the ground is discussed. The detector and the electronic signal processing and data storage systems are presented along with field data measured by the system. The discussion will include improvements that will be incorporated to enhance the measurement of lightning and the data storage capability to record for many days without human involvement. Finally, the calibration of the GOLD system is presented.
Report describes study of thermal conductance of gold-plated copper, aluminum, brass, and stainless-steel contacts at temperatures from 1.6 to 4.2 K under applied forces of 22 to 670 N.
Ground-Orbiter Lasercomm Demonstration (GOLD) includes the following: (1) Optical communication experiments between Table Mountain Observatory (TMF) and Japanese Engineering Test Satellite (ETS-VI); (2) International cooperative effort between NASA, NASDA, CRL and JPL; and (3) Phase 1 transmissions from October 1995 to January 1996 and Phase 2 transmissions from March 1996 to May 1996.
The Ground/Orbiter Lasercomm Demonstration is a demonstration of optical communications between the Japanese Engineering Test Satellite (ETS-VI) and an optical ground transmitting and receiving station at the Table Mountain Facility in Wrightwood, California. Laser transmissions to the satellite are performed for approximately 4 hours every third night when the satellite is at apogee above Table Mountain. The experiment requires the coordination of resources at the Communications Research Laboratory (CRL), JPL, the National Aeronautics and Space Development Agency (NASDA) Tsukuba tracking station, and NASA's Deep Space Network at Goldstone, California, to generate and transmit real-time commands and receive telemetry from the ETS-VI. Transmissions to the ETS-VI began in November 1995 and are scheduled to last into the middle of January 1996, when the satellite is expected to be eclipsed by the Earth's shadow for a major part of its orbit. The eclipse is expected to last for about 2 months, and during this period there will be limited electrical power available on board the satellite. NASDA plans to restrict experiments with the ETS-VI during this period, and no laser transmissions are planned. Posteclipse experiments are currently being negotiated. GOLD is a joint NASA-CRL experiment that is being conducted by JPL in coordination with CRL and NASDA.
We report what is believed to be the first experimental demonstration of gold coating by a chemical baking process on tapered fiber tips used in near-field scanning optical microscopy. Many tips can be simultaneously coated.
Cosmogenic radionuclides and noble gases in samples of the Gold Basin L-chondrite shower indicate a complex exposure history, with a first stage exposure on the parent body, followed by a second stage of approx. 19 Myr in a meteoroid 3-4 m in radius. Additional information is contained in the original extended abstract.
The Advanced Qualification Program requires that airlines evaluate crew performance in Line Oriented Simulation. For this evaluation to be meaningful, instructors must observe relevant crew behaviors and evaluate those behaviors consistently and accurately against standards established by the airline. The airline industry has largely settled on an approach in which instructors evaluate crew performance on a series of event sets, using standardized grade sheets on which behaviors specific to event set are listed. Typically, new instructors are given a class in which they learn to use the grade sheets and practice evaluating crew performance observed on videotapes. These classes emphasize reliability, providing detailed instruction and practice in scoring so that all instructors within a given class will give similar scores to similar performance. This approach has value but also has important limitations; (1) ratings within one class of new instructors may differ from those of other classes; (2) ratings may not be driven primarily by the specific behaviors on which the company wanted the crews to be scored; and (3) ratings may not be calibrated to company standards for level of performance skill required. In this paper we provide a method to extend the existing method of training instructors to address these three limitations. We call this method the "gold standards" approach because it uses ratings from the company's most experienced instructors as the basis for training rater accuracy. This approach ties the training to the specific behaviors on which the experienced instructors based their ratings.
Free-space laser communications experiments were conducted between the laser communication equipment (LCE) on board the Japanese Engineering Test Satellite VI (ETS-VI) and the ground station located at the Table Mountain Facility (TMF) during late 1995 and early 1996. This article describes the on-line data reduction process used to decode LCE telemetry (called E2) downlinked on the optical carrier during the Ground/Orbiter Lasercomm Demonstration (GOLD) experiments. The LCE has the capability of transmitting real-time sensor and status information at 128 kbps by modulating the onboard diode laser. The optical downlink was detected on the ground, bit synchronized, and the resulting data stream stored on a data recorder. The recorded data were subsequently decoded by on-line data processing that included cross-correlation of the known telemetry data format and the downlink data stream. Signals obtained from the processing can be useful not only in evaluating the characteristics of the LCE but also in understanding uplink and downlink signal quality.
A new visualization environment, pV3-Gold, can be used during and after a computer simulation to extract and visualize the physical features in the results. This environment, which is an extension of the pV3 visualization environment developed at the Massachusetts Institute of Technology with guidance and support by researchers at the NASA Lewis Research Center, features many tools that allow users to display data in various ways.
An electrochemical method for forming a partial monomolecular layer of a predetermined extent of coverage of a thiolate of the formula, XRS--, therein R can be a linear or branched chain hydrocarbon or an aromatic or the like and X can be any compatible end group, e.g., OH, COOH, CH.sub.3 or the like, upon a substrate such as gold, which involves applying in an electrochemical system a constant voltage preselected to yield the desired predetermined extent of coverage.
Extremely tight thermal control property degradation allowances on the vapor-deposited, gold-coated IEC baffle surface, made necessary by the cryogenic JWST Observatory operations, dictate tight contamination requirements on adjacent surfaces. Theoretical degradation in emittance with contaminant thickness was calculated. Maximum allowable source outgassing rates were calculated using worst case view factors from source to baffle surface. Tight requirements pushed the team to change the design of the adjacent surfaces to minimize the outgassing sources
The atomic scattering factor in the energy range of 11.2 - 15.4 keV for the ASTRO-H Soft X-ray Telescope (SXT) is reported. The large effective area of the SXT makes use of photon spectra above 10 keV viable, unlike most other X-ray satellites with total-reflection mirror optics. Presence of gold's L-edges in the energy band is a major issue, as it complicates the function of the effective area. In order to model the area, the reflectivity measurements in the 11.2 - 15.4 keV band with the energy pitch of 0.4 - 0.7 eV were made in the synchrotron beam-line Spring-8 BL01B1. We obtained atomic scattering factors f1 and f2 by the curve fitting to the reflectivities of our witness sample. The edges associated with the L-I, II, and III transitions are identified, of which the depths are found to be roughly 60 shallower than those expected from the Henkes atomic scattering factor.
We report the atomic scattering factor in the 11.215.4 keV for the ASTRO-H Soft X-ray Telescope (SXT) obtained in the ground based measurements. The large effective area of the SXT covers above 10 keV. In fact, the flight data show the spectra of the celestical objects in the hard X-ray band. In order to model the area, the reflectivity measurements in the 11.2-15.4 keV band with the energy pitch of 0.4-0.7 eV were made in the synchrotron beamline Spring-8 BL01B1. We obtained atomic scattering factors f1 and f2 by the curve fitting to the reflectivities of our witness sample. The edges associated with the golds L-I, II, and III transitions are identified, of which the depths are found to be roughly 60 percent shallower than those expected from the Henke's atomic scattering factor.
The Ground-Orbiter Lasercomm Demonstration (GOLD) is an international co-operative effort between NASA, NASDA, CRL, and JPL involving optical communication experiments between the Table Mountain Observatory (TMF) and the Japanese Engineering Test Satellite (ETS-VI). Experiments verify the feasibility of daytime acquisition and tracking in two-way space-to-ground laser communication from geostationary ranges using multibeam uplinks. Experimental data clearly show significant reduction in scintillation with multiple beams. Collected data includes a combination of atmospheric effects as well as spacecraft vibrations and pointing errors. Furthur analyses are required to deconvolve these effects.
Gold mining has played a significant role in Ghana's economy for centuries. Regulation of this industry has varied over time and while industrial mining is prevalent in the country, the expansion of artisanal mining, or Galamsey has escalated in recent years. Many of these artisanal mines are not only harmful to human health due to the use of Mercury (Hg) in the amalgamation process, but also leave a significant footprint on terrestrial ecosystems, degrading and destroying forested ecosystems in the region. In this study, the Landsat image archive available through Google Earth Engine was used to quantify the total footprint of vegetation loss due to artisanal goldmines in Ghana from 2005 to 2019 and understand how conversion of forested regions to mining has changed over a decadal period from 2007 to 2017. A combination of machine learning and change detection algorithms were used to calculate different land cover conversions and the timing of conversion annually. Within the study area of southwestern Ghana, our results indicate that approximately 47,000 ha (⨦2218 ha) of vegetation were converted to mining at an average rate of ~2600 ha yr−1. The results indicate that a high percentage(~50%) of this mining occurred between 2014 and 2017. Around 700 ha of this mining occurred within protected areas as mapped by the World Database of Protected Areas. In addition to deforestation, increased artisanal mining activity in recent years has the potential to affect human health, access to drinking water resources and food security. This work expands upon limited research into the spatial footprint of Galamseyin Ghana, complements mapping efforts by local geographers, and will support efforts by the government of Ghana to monitor deforestation caused by artisanal mining.
We examine characteristics of the seasonal variation of thermospheric composition using column number density ratio ∑O/N(2) observed by the NASA Global Observations of Limb and Disk (GOLD) mission from low-mid to mid-high latitudes. We also use ∑O/N(2) derived from the Global Ultraviolet Imager (GUVI) limb measurements onboard the Thermosphere Ionosphere Mesosphere Energetics and Dynamics (TIMED) satellite and estimated by the NRLMSISE-00 empirical model to aid our investigation. We found that the ∑O/N(2) seasonal variation is hemispherically asymmetric: in the southern hemisphere, it exhibits the well-known annual and semiannual pattern, with highs near the equinoxes, and primary and secondary lows near the solstices. In the northern hemisphere, it is dominated by an annual variation, with a minor semiannual component with the highs shifting toward the wintertime. We also found that the durations of the December and June solstice seasons in terms of ∑O/N(2) are highly variable with longitude. Our hypothesis is that ion-neutral collisional heating in the equatorial ionization anomaly region, ion drag, and auroral Joule heating play substantial roles in this longitudinal dependency. Finally, the rate of change in ∑O/N(2) from one solstice season to the other is dependent on latitude, with more dramatic changes at higher latitudes.
The detection of Lead (Pb) heavy metal in water is crucial in many chemical processes as it is associated with serious health hazard. Here, we report the selective and precise colorimetric detection of Pb 2+ ions in water exploiting the mechanisms of aggregation and self-assembly of Glutathione (GSH) functionalized gold nanoparticles (GNPs). The carboxyl functional groups are available to create coordination complexes with Pb 2+ inducing aggregation amongst the GSH-GNPs in the presence of Pb 2+ due to the chelation of the GSH ligands. The resulting aggregation of amongst the GSHGNPs in the presence of Pb2+ increases the aggregate size depending on available Pb 2+ ions affecting the plasmonic coupling. This causes in a substantial shift in the plasmon wavelength to a longer wavelength side with increasing Pb 2+ concentration, resulting in a red-to-blue colorimetric or visual change, enabling instant determination of lead content in water.