Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GOES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Numerical wave propagation on non-uniform one-dimensional staggered grids

The wave propagation behaviour of centered difference schemes on one-dimensional non-uniform staggered grids is investigated. Previous results for the linear advection equation are extended to the case of the shallow water equations on staggered grids. For waves of a given frequency, the wave field is decomposed into right- and left-propagating components, and a wave energy conservation law is derived in terms of these components. For slowly varying grids, separate evolution equations for the right- and left-propagating components are derived, leading to the result that there is asymptotically no reflection in the limit of a slowly varying grid, provided that waves of that frequency are resolvable. However, there will be reflection from any location at which the wave group velocity goes to zero. The possibility for wave energy to tunnel through a narrow region of the grid too coarse for propagation is noted. Grids with an abrupt jump in resolution are also investigated. It is possible to tailor the scheme at the jump to minimize spurious wave reflection over a range of frequencies provided the waves are resolvable on both sides of the jump. However, it does not appear possible to avoid complete reflection, except by introducing extra dissipation terms, if the waves are not resolvable on one side of the jump. An example is presented of a second-order accurate scheme that spontaneously radiates waves from the resolution jump.

97 MATHEMATICS AND COMPUTING↗

An asymptotic-preserving scheme for the semiconductor Boltzmann equation toward the energy-transport limit

We design an asymptotic-preserving scheme for the semiconductor Boltzmann equation which leads to an energy-transport system for electron mass and energy as mean free path goes to zero. As opposed to the classical drift-diffusion limit where the stiff collisions are all in one scale, new difficulties arise in the two-scale stiff collision terms because the simple BGK penalization [15] fails to drive the solution to the correct limit. We propose to set up a spatially dependent threshold on the penalization of the stiffer collision operator such that the evolution of the solution resembles a Hilbert expansion at the continuous level. Formal asymptotic analysis and numerical results confirm the efficiency and accuracy of our scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Statistical behaviour of adaptive multilevel splitting algorithms in simple models

Adaptive multilevel splitting algorithms have been introduced rather recently for estimating tail distributions in a fast and efficient way. In particular, they can be used for computing the so-called reactive trajectories corresponding to direct transitions from one metastable state to another. The algorithm is based on successive selection–mutation steps performed on the system in a controlled way. It has two intrinsic parameters, the number of particles/trajectories and the reaction coordinate used for discriminating good or bad trajectories. We investigate first the convergence in law of the algorithm as a function of the timestep for several simple stochastic models. Second, we consider the average duration of reactive trajectories for which no theoretical predictions exist. The most important aspect of this work concerns some systems with two degrees of freedom. They are studied in detail as a function of the reaction coordinate in the asymptotic regime where the number of trajectories goes to infinity. We show that during phase transitions, the statistics of the algorithm deviate significatively from known theoretical results when using non-optimal reaction coordinates. In this case, the variance of the algorithm is peaking at the transition and the convergence of the algorithm can be much slower than the usual expected central limit behaviour. The duration of trajectories is affected as well. Moreover, reactive trajectories do not correspond to the most probable ones. Such behaviour disappears when using the optimal reaction coordinate called committor as predicted by the theory. We finally investigate a three-state Markov chain which reproduces this phenomenon and show logarithmic convergence of the trajectory durations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pairwise-interaction extended point-particle model for particle-laden flows

In this work we consider the pairwise interaction extended point-particle (PIEP) model for Euler–Lagrange simulations of particle-laden flows. By accounting for the precise location of neighbors the PIEP model goes beyond local particle volume fraction, and distinguishes the influence of upstream, downstream and laterally located neighbors. The two main ingredients of the PIEP model are (i) the undisturbed flow at any particle is evaluated as a superposition of the macroscale flow and a microscale flow that is approximated as a pairwise superposition of perturbation fields induced by each of the neighboring particles, and (ii) the forces and torque on the particle are then calculated from the undisturbed flow using the Faxén form of the force relation. The computational efficiency of the standard Euler–Lagrange approach is retained, since the microscale perturbation fields induced by a neighbor are pre-computed and stored as PIEP maps. Here we extend the PIEP force model of Akiki et al. with a corresponding torque model to systematically include the effect of perturbation fields induced by the neighbors in evaluating the net torque. Also, we use DNS results from a uniform flow over two stationary spheres to further improve the PIEP force and torque models. We then test the PIEP model in three different sedimentation problems and compare the results against corresponding DNS to assess the accuracy of the PIEP model and improvement over the standard point-particle approach. In the case of two sedimenting spheres in a quiescent ambient the PIEP model is shown to capture the drafting-kissing-tumbling process. In cases of 5 and 80 sedimenting spheres a good agreement is obtained between the PIEP simulation and the DNS. For all three simulations, the DEM-PIEP was able to recreate, to a good extent, the results from the DNS, while requiring only a negligible fraction of the numerical resources required by the fully-resolved DNS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A multidimensional unified gas-kinetic scheme for radiative transfer equations on unstructured mesh

In order to extend the unified gas kinetic scheme (UGKS) to solve radiative transfer equations in a complex geometry, a multidimensional asymptotic preserving implicit method on unstructured mesh is constructed in this paper. With an implicit formulation, the CFL condition for the determination of the time step in UGKS can be much relaxed, and a large time step is used in simulations. Differently from previous direction-by-direction UGKS on orthogonal structured mesh, on unstructured mesh the interface flux transport takes into account multi-dimensional effect, where gradients of radiation intensity and material temperature in both normal and tangential directions of a cell interface are included in the flux evaluation. The multiple scale nature makes the UGKS be able to capture the solutions in both optically thin and thick regions seamlessly. In the optically thick region the condition of cell size being less than photon's mean free path is fully removed, and the UGKS recovers a solver for diffusion equation in such a limit on unstructured mesh. For a distorted quadrilateral mesh, the UGKS goes to a nine-point scheme for the diffusion equation, and it naturally reduces to the standard five-point scheme for a orthogonal quadrilateral mesh. Numerical computations covering a wide range of transport regimes on unstructured and distorted quadrilateral meshes will be presented to validate the current approach. - Highlights: • A unified gas-kinetic scheme (UGKS) on unstructured mesh has been developed in all flow regimes. • The scheme solves diffusion equation in optical thick region with large cell size. • The implicit UGKS removes the CFD condition. The efficiency of the scheme has been much improved.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SubTSBR to tackle high noise and outliers for data-driven discovery of differential equations

Data-driven discovery of differential equations has been an emerging research topic. We propose a novel algorithm subsampling-based threshold sparse Bayesian regression (SubTSBR) to tackle high noise and outliers. The subsampling technique is used for improving the accuracy of the Bayesian learning algorithm. It has two parameters: subsampling size and the number of subsamples. When the subsampling size increases with fixed total sample size, the accuracy of our algorithm goes up and then down. When the number of subsamples increases, the accuracy of our algorithm keeps going up. We demonstrate how to use our algorithm step by step and compare our algorithm with threshold sparse Bayesian regression (TSBR) for the discovery of differential equations. We show that our algorithm produces better results. We also discuss the merits of discovering differential equations from data and demonstrate how to discover models with random initial and boundary condition as well as models with bifurcations. The numerical examples are: (1) predator-prey model with noise, (2) shallow water equations with outliers, (3) heat diffusion with random initial and boundary condition, and (4) fish-harvesting problem with bifurcations.

97 MATHEMATICS AND COMPUTING↗

Theoretical analysis of crack front instability in mode I+III

This paper focusses on the theoretical prediction of the widely observed crack front instability in mode I+III, that causes both the crack surface and crack front to deviate from planar and straight shapes, respectively. This problem is addressed within the classical framework of fracture mechanics, where the crack front evolution is governed by conditions of constant energy-release-rate (Griffith criterion) and vanishing stress intensity factor of mode II (principle of local symmetry) along the front. The formulation of the linear stability problem for the evolution of small perturbations of the crack front exploits previous results of Movchan et al. (1998) (suitably extended) and Gao and Rice (1986), which are used to derive expressions for the variations of the stress intensity factors along the front resulting from both in-plane and out-of-plane perturbations. We find exact eigenmode solutions to this problem, which correspond to perturbations of the crack front that are shaped as elliptic helices with their axis coinciding with the unperturbed straight front and an amplitude exponentially growing or decaying along the propagation direction. Exponential growth corresponding to unstable propagation occurs when the ratio of the unperturbed mode III to mode I stress intensity factors exceeds some “threshold” depending on Poisson's ratio. Moreover, the growth rate of helical perturbations is inversely proportional to their wavelength along the front. This growth rate therefore diverges when this wavelength goes to zero, which emphasizes the need for some “regularization” of crack propagation laws at very short scales. Furthermore, this divergence also reveals an interesting similarity between crack front instability in mode I+III and well-known growth front instabilities of interfaces governed by a Laplacian or diffusion field.

Crack front↗

Operational resilience of additively manufactured parts to stealthy cyberphysical attacks using geometric and process digital twins

Cyberphysical attacks on the digital backbone of Additive Manufacturing (AM) can compromise the printed part’s functionality. They can alter features in the digital geometry to introduce geometric defects (e.g., missing fillets) or alter process parameters to create local defects (e.g., voids). Addressing the downtime, waste, and quality deterioration associated with existing solutions requires operational resilience, i.e., rapid elimination or disruption of defect formation (to retain part function) without production stoppage or part disposal (to retain yield). This need is unmet due to the inherently unpredictable nature of attack-induced alterations, lack of access to the original geometric model for identification of altered geometric features, and in-process imposition of unknown process dynamics via attack-driven alteration of real-time-uncontrolled (or exogenous) parameters. This work establishes the above-mentioned operational resilience for the first time by creating two Digital Twins (DT). The Geometric DT (Geo-DT) is based on a unique physical-field-driven soft sensor and topology optimization method. The Process Digital Twin (Pro-DT) combines local defect quantification with a novel Reinforcement Learning formulation and training method. The importance of these methodological advances and the scalability of our approach are examined on a real AM testbed. It is shown that Geo-DT can correct geometric defects without access to the original digital geometry or explicit knowledge of attack-altered geometric features. Further, Pro-DT can accelerate real-time disruption of local defects despite attack-driven imposition of unknown process dynamics. We discuss how our framework goes beyond the contemporary focus on pre-attack security and in-attack detection towards resilience for AM and beyond.

Additive Manufacturing↗

Solubility Control of Technetium Release from Saltstone by Tc02•xH20

Saltstone leaching experiments were conducted using a modified single-pass flow-through method under anoxic conditions. The analytical results of leachates collected from these experiments were evaluated using thermodynamic modeling to determine if the data were consistent with potential solubility controlling phases. The results demonstrate that technetium concentrations in water in contact with Saltstone under anoxic conditions is controlled by the solubility of TcO2•xH2O (likely TcO2•1.6H2O). In our system equilibrium solubility appears to have been reached within two weeks at a concentration of approximately 1.5 x 10-6 M. This concentration is likely to vary as the composition of Saltstone pore fluid evolves over time. As the pH goes from the initial high values (~12.5-13) to lower values, the solubility of technetium will decrease significantly. The thermodynamic data used to determine the solubility of TcO2•1.6H2O were taken from the tabulation of critically selected thermodynamic data determined by the Nuclear Energy Agency. Solid phase characterization to demonstrate the presence of TcO2•xH2O was not possible due to the low concentrations of technetium in our samples. Previous solid phase characterization studies with cementitious waste forms that were very similar to our Saltstone samples as well as reaction products derived from reductive immobilization of TcO4- by amorphous FeS clearly indicate the presence of TcO2 with varying degrees of hydration. Although, the presence of TcSx or other reduced technetium sulfide phases in our samples cannot be ruled out, release of technetium from Saltstone will be controlled by TcO2•1.6H2O because of its higher solubility. Our results clearly demonstrate that the release mechanism of technetium from Saltstone under reducing conditions is solubility controlled by TcO2•xH2O (likely TcO2•1.6H2O); however, distribution coefficients (Kds), that describe sorption and not solubility, were calculated for comparison with past literature values. After 84 days of reaction under anoxic conditions, the average Kd value for technetium was determined to be 610 mL/g. This value is similar to a value determined previously for a similar saltstone sample under reducing conditions at 56 days (712 ± 81 mL/g).

Saltstone↗

Comprehensive survey of Nd{sup 3+} substitution In La{sub 2}Mo{sub 2}O{sub 9} oxide-ion conductor

Differential thermal analysis coupled to temperature-controlled diffraction have given evidence of a topological metastability phenomenon in an extended compositional range of the La{sub 2-x}Nd{sub x}Mo{sub 2}O{sub 9} solid solution. A metastable-stable phase diagram is proposed for this series of LAMOX-type fast oxide-ion conductors. In the Nd range 0<x<=0.35, a freezing of the oxygen/vacancy disorder of the beta-phase at ambient temperature can be achieved through a splat-quenching to water-ice mixture or/and shaping/sintering into pellet. In the intermediate 0.4<=x<=1.2 range, the amount of beta-metastable phase grows upon substitution for powders. The negative impact of beta-metastable to alpha phase transition on conductivity tends to disappear through the partial stabilization of the beta phase by shaping/sintering. - Graphical abstract: Metastable-stable phase diagram of the solid solution La{sub 2-x}Nd{sub x}Mo{sub 2}O{sub 9} determined from DTA. The topological metastability of the high-temperature cubic beta-form which goes back to monoclinic stable alpha-form above 450-500 deg. C is shown in the intermediate range 0.4<=x<=1.2. Above x=1.2, this transition progressively changes into a thermal trace of the postulated Arrhenius/VTF transformation of transport mechanism.

36 MATERIALS SCIENCE↗

Incommensurately modulated LT''-Ni{sub 1+{delta}}Sn (delta=0.60, 0.63): Rietveld refinement, line-broadening analysis and structural relation with LT- and LT'-Ni{sub 1+{delta}}Sn

X-ray powder diffraction data of NiAs/Ni{sub 2}In-type Ni{sub 1.60}Sn and Ni{sub 1.63}Sn alloys annealed at or below about 573 K reveal the development of an incommensurately ordered phase called LT''. In this phase Ni(2) atoms occupy partially the trigonal-bipyramidal interstices formed by five Sn within an NiAs-type arrangement Ni(1)Sn. The modulated occupational ordering of Ni(2) in the LT'' phase can be described in the superspace group Cmcm(alpha00)0 s 0, and the parameters describing this occupational modulation were refined together with atomic displacement modulations using the Rietveld method. The structure parameters revealed close structural analogies of the LT'' phase with the previously reported commensurate LT-Ni{sub 1+{delta}}Sn and incommensurate LT'-Ni{sub 1+{delta}}Sn phases (A. Leineweber, J. Solid State Chem. 177 (2004) 1197-1212), which both occur for lower Ni contents than the LT'' phase. The 1st-order satellite reflections visible in the powder-diffraction patterns exhibit, with respect to the fundamental reflections, a considerable diffraction-line broadening, caused by a small size of the particularly ordered domains. This small-domain-size broadening was successfully described by a recently developed reflection-index (hklm) dependent (anisotropic) line-broadening model (A. Leineweber, V. Petricek, J. Appl. Crystallogr. 40 (2007) 1027-1034) designed to consider the effect of fluctuations of the lattice metrics on the peak widths in powder diffraction patterns of incommensurately modulated crystal structures. The small domain sizes encountered for the LT'' phase indicate that domain coarsening is much more difficult than for the LT and LT' phases. This special feature of the LT'' phase goes along with a compared to the LT and LT' phases absent orthorhombic distortion and the low ordering temperature, which are discussed as a consequence of the ordering patterns due to the Ni(2) atoms. - Graphical abstract: Approximant structure of incommensurately modulated LT''-Ni{sub 1.60}Sn, forming below 573 K from the disordered phase. The phase has a close structural relationship to the LT and LT' phases occurring at lower Ni contents.

36 MATERIALS SCIENCE↗

Chemical order and local structure of the lead-free relaxor ferroelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}

The A-site mixed perovskite sodium bismuth titanate (Na{sub 1/2}Bi{sub 1/2})TiO{sub 3} (NBT) is investigated by means of first-principles calculations based on density functional theory. By studying different geometries with varying occupations of the A-site, the influence of chemical order on the thermodynamic stability and local structure is explored. We find that the hybridization of Bi 6sp with O 2p-states leads to stereochemically active Bi{sup 3+} lone pairs and increases the stability of structures with high Bi concentrations in {l_brace}001{r_brace}-planes. This goes along with displacive disorder on the oxygen sublattice, which up to now has been neglected in experimental studies. The calculated ordering energies are, however, small as compared to the thermal energy and therefore only short-range chemical order can be expected in experiments. Thus, it is conceivable that chemically ordered local areas can act as nucleation sites for polar nano-regions, which would explain the experimentally observed relaxor behavior of NBT. - Graphical abstract: First-principles calculations give relative stabilities of different chemically ordered structures. The results suggest a new model for the local structure of Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} with 001-ordered nano-regions embedded in a chemically disordered matrix. Chemical order/disorder additionally induces displacive disorder within the oxygen sublattice. Highlights: > Lead-free relaxor ferroelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} is studied by ab initio-calculations. > Structural relaxations in the oxygen sublattice are decisive for relative stabilities. > Chemical environment of oxygen determines relaxation ability. > Bi 6s{sup 2} lone pair formation is the driving force for relaxation. > New structure model: Chemically 001-ordered nano-regions embedded in disordered matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, physical properties and electronic structure of Sr{sub 1-x}La{sub x}Cu{sub 2}Pn{sub 2} (Pn=P, As, Sb)

To explore new series of high-T{sub c} superconductors, Cu-based ternary pnictides of SrCu{sub 2}Pn{sub 2} (Pn=P, As, Sb) with La doping were synthesized at 1073 K from the stoichiometric reaction of the elements. The electrical and magnetic properties as well as the electronic structure were systematically investigated. Absence of superconductive transition was observed over the temperature range from room temperature down to 2 K, and these materials show p-type metal-like conductivity and Pauli paramagnetic behavior. The near E{sub F} bands mainly originate from Cu 3d and Pn np states and the value of total densities of states (DOS) becomes higher as Pn goes from P to Sb. The results provides us with considerable information for a better understanding of the transport properties in pnictides. - Graphical abstract: Sr{sub 1-x}La{sub x}Cu{sub 2}Pn{sub 2} (Pn=P, As, Sb) show metal-like conducting behavior and no superconductive transition was observed from 300 K down to 2 K. Highlights: Black-Right-Pointing-Pointer The superconductivity and electronic structure of Sr{sub 1-x}La{sub x}Cu{sub 2}Pn{sub 2} were investigated. Black-Right-Pointing-Pointer Sr{sub 1-x}La{sub x}Cu{sub 2}Pn{sub 2} show p-type metal-like conducting behavior and paramagnetism. Black-Right-Pointing-Pointer The near E{sub F} electronic structure of SrCu{sub 2}Pn{sub 2} mainly originate from Cu 3d and Pn np states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mg dopant in Cu{sub 2}ZnSnSe{sub 4}: An n-type former and a promoter of electrical mobility up to 120 cm{sup 2} V{sup −1} s{sup −1}

Mg-doped Cu{sub 2}ZnSnSe{sub 4} (CZTSe) bulk materials with the (Cu{sub 2−x}Mg{sub x})ZnSnSe{sub 4} formula at x=0, 0.1, 0.2, 0.3, and 0.4 were prepared at 600 °C for 2 h with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring structural and electrical properties of Mg-doped CZTSe as a function of dopant concentration. Except at x=0, all Mg-doped CZTSe pellets showed an n-type behavior. The Mg-doped CZTSe pellets showed an n-type behavior. n-Type Mg-CZTSe pellets at x=0.1 showed the highest electrical conductivity of 24.6 S cm{sup −1} and the net hole mobility of 120 cm{sup 2} V{sup −1} s{sup −1}, while they were 11.8 S cm{sup −1} and 36.5 cm{sup 2} V{sup −1} s{sup −1} for the undoped p-type CZTSe. Mg dopant is a strong promoter of electrical mobility. Mg dopant behaves as a donor defect in CZTSe at a 5% doping content, but is also used as an acceptor at a high content above 5%. Mg doping has further developed CZTSe into a promising semiconductor. - Graphical abstract: The effects of extrinsic doping of Mg{sup 2+} on the electrical properties of Cu{sub 2}ZnSnSe{sub 4} bulks. - Highlights: • (Cu{sub 2−x}Mg{sub x})ZnSnSe{sub 4} bulks were fabricated by liquid-phase sintering at 600 °C. • All Mg-x-CZTSe pellets except at x=0 exhibited n-type conductivity. • Electrical properties of CZTSe pellets changed with the Cu and Mg ratios. • Mg{sup 2+} goes to the Cu{sup 1+} site to form the Mg{sub Cu}{sup 1+} donor defect for the n-type CZTSe. • n-Type Mg-0.1-CZTSe bulk with 5% Mg showed the highest mobility of 120 cm{sup 2} V{sup −1} s{sup −1}.

36 MATERIALS SCIENCE↗

Pressure-induced phase transitions of hexagonal perovskite-like oxides

We have stabilized two new cubic (3C structured) A{sub 2}B′B′′O{sub 6}-type double-perovskite phases, Ba{sub 2}CoSbO{sub 6} and Ba{sub 2}ZnTeO{sub 6}, by means of a high-pressure heat-treatment of corresponding hexagonal (6H and 12R structured, respectively) non-perovskite phases at 4 GPa and 1000 °C. Similar treatments on hexagonal Ba{sub 2}TiMnO{sub 6} (12R) and Ba{sub 2}NiTeO{sub 6} (12R) phases did not yield the 3C double-perovskite structure but converted the 12R structure to the 6H structure. The pressure-induced phase conversion in each A{sub 2}B′B′′O{sub 6} system apparently goes from the 12R structure towards the 6H and 3C structures with increasing pressure, where the pressure ranges required most likely depend (among other possible factors) on the tolerance factor for the particular combination of A, B′ and B′′. We foresee that yet a number of novel B-site ordered double-perovskite compounds are to be discovered through the high-pressure high-temperature treatment. - Graphical abstract: High-pressure (HP) heat-treatment is an efficient tool to synthesize novel B-site ordered double-perovskite materials. This is demonstrated for two new cubic (3C structured) perovskite phases, Ba{sub 2}CoSbO{sub 6} and Ba{sub 2}ZnTeO{sub 6}, obtained through a HP conversion of corresponding hexagonal (6H and 12R structured, respectively) non-perovskite phases at 4 GPa and 1000 °C. Similar treatments on hexagonal Ba{sub 2}TiMnO{sub 6} (12R) and Ba{sub 2}NiTeO{sub 6} (12R) phases yield the intermediate 6H structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of γ-irradiation induced phase transformations in nanocrystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} ceramics

The structural, infrared absorption and magnetic property transformations in nanocrystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} samples irradiated with different doses (0, 15, 25 and 50 kGy) of γ-irradiation were investigated in this work and a mechanism of phase transformation/decomposition is provided based on the metastable nature of the Mn-atoms in the spinel lattice. The nano-powder sample was prepared by solution combustion route and the pellets of the sample were exposed to γ-radiation. Up to a dose of 25 kGy of γ-radiation, the sample retained the single phase cubic spinel (Fd-3m) structure, but the disorder in the sample increased. On irradiating the sample with 50 kGy γ-radiation, the spinel phase decomposed into new stable phases such as α-Fe{sub 2}O{sub 3} and ZnFe{sub 2}O{sub 4} phases along with amorphous MnO phase, leading to a change in the surface morphology of the sample. Along with the structural transformations the magnetic properties deteriorated due to breakage of the ferrimagnetic order with higher doses of γ-irradiation. Our results are important for the understanding of the stability, durability and performance of the Mn-Zn ferrite based devices used in space applications. - Graphical abstract: The nanocrystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} ceramic sample transforms to crystalline α-Fe{sub 2}O{sub 3} and ZnFe{sub 2}O{sub 4} phases (and amorphous MnO phase) at a γ-irradiation dose of 50 kGy, as MnO goes out of the spinel lattice. The high energy γ-irradiation causes structural damage to the nanomaterials leading to change in morphology of the sample as seen in the SEM images. - Highlights: • Mn atoms are more unstable in the Mn-Zn ferrite spinel lattice than Zn-atoms. • Displacement of Mn atoms by γ-radiation from the lattice renders phase transformation. • In Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}, Mn-ferrite cell transforms to crystalline α-Fe{sub 2}O{sub 3} and amorphous MnO. • The stable ZnFe{sub 2}O{sub 4} phase retains its structure even after 50 KGy γ-irradiation. • The γ-irradiation degrades the magnetic properties of Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing the tensile properties of EBM as-built thin parts: Effect of HIP and chemical etching

Highlights: • The EBM process leads to important cross section variations in thin parts. • Stress calculation must be based on the average section in order to be relevant. • As-built state has a detrimental effect on every mechanical property. • Mechanical properties of machined samples are met with chemical etching. • HIP has a beneficial effect on the ductility. - Abstract: As-built Ti-6Al-4 V thin parts were manufactured using Electron Beam Melting (EBM) and characterized by optical microscopy and laboratory X-ray tomography in order to observe their microstructure, pore distribution and surface aspect. Chemical etching and HIP post-treatments were applied to as-built samples and their effect on the material and static mechanical properties were studied. Tensile tests were performed on both as-built and post-treated samples and their results compared to the ones reported in the literature for machined EBM samples. Because of the significant variations of the cross section observed along the gauge length, the calculation of the tensile stresses is not straightforward. Three simple sections were measured from the tomography scans. The average section along the gauge length was considered as the most suitable. The tensile mechanical properties of the as-built samples were studied and a detrimental effect of the surface state on the yield strength, ultimate tensile strength and elongation to failure was observed. Smoothing of the surface irregularities induced by chemical etching provoked an increase of those mechanical properties whereas the change of the microstructure generated by the HIP treatment leads to a decrease of the material strength that goes along with an increase of the ductility. Down scaling factors were proposed in order to take into account the sample state, as-built or post-treated.

36 MATERIALS SCIENCE↗