Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Feature Space”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Discovery of a weak topological insulating state and van Hove singularity in triclinic RhBi2

Abstract Time reversal symmetric (TRS) invariant topological insulators (TIs) fullfil a paradigmatic role in the field of topological materials, standing at the origin of its development. Apart from TRS protected strong TIs, it was realized early on that more confounding weak topological insulators (WTI) exist. WTIs depend on translational symmetry and exhibit topological surface states only in certain directions making it significantly more difficult to match the experimental success of strong TIs. We here report on the discovery of a WTI state in RhBi 2 that belongs to the optimal space group P $$\bar{1}$$ 1 ¯ , which is the only space group where symmetry indicated eigenvalues enumerate all possible invariants due to absence of additional constraining crystalline symmetries. Our ARPES, DFT calculations, and effective model reveal topological surface states with saddle points that are located in the vicinity of a Dirac point resulting in a van Hove singularity (VHS) along the (100) direction close to the Fermi energy ( E F ). Due to the combination of exotic features, this material offers great potential as a material platform for novel quantum effects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A high internal heat flux and large core in a warm Neptune exoplanet

Interactions between exoplanetary atmospheres and internal properties have long been proposed to be drivers of the inflation mechanisms of gaseous planets and apparent atmospheric chemical disequilibrium conditions. However, transmission spectra of exoplanets have been limited in their ability to observationally confirm these theories owing to the limited wavelength coverage of the Hubble Space Telescope (HST) and inferences of single molecules, mostly H 2 O. Here, in this work, we present the panchromatic transmission spectrum of the approximately 750 K, low-density, Neptune-sized exoplanet WASP-107b using a combination of HST Wide Field Camera 3 (WFC3) and JWST Near-Infrared Camera (NIRCam) and Mid-Infrared Instrument (MIRI). From this spectrum, we detect spectroscopic features resulting from H 2 O (21σ), CH 4 (5σ), CO (7σ), CO 2 (29σ), SO 2 (9σ) and NH 3 (6σ). The presence of these molecules enables constraints on the atmospheric metal enrichment (M/H is 10–18× solar), vertical mixing strength (log 10 K zz = 8.4–9.0 cm 2 s -1 ) and internal temperature (>345 K). The high internal temperature is suggestive of tidally driven inflation4 acting on a Neptune-like internal structure, which can naturally explain the large radius and low density of the planet. These findings suggest that eccentricity-driven tidal heating is a critical process governing atmospheric chemistry and interior-structure inferences for most of the cool (<1,000 K) super-Earth-to-Saturn-mass exoplanet population.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Active learning of a crystal plasticity flow rule from discrete dislocation dynamics simulations

Continuum-scale material deformation models, such as crystal plasticity (CP), can significantly enhance their predictive accuracy by incorporating input from lower-scale (i.e. mesoscale) models. The procedure to generate and extract the relevant information is however typically complex and ad hoc, involving decision and intervention by domain experts, leading to long development times. In this study, we develop a principled approach for calibration of continuum-scale models using lower scale information by representing a CP flow rule as a Gaussian process model. This representation allows for efficient parameter space exploration, guided by the uncertainty embedded in the model through a process known as Bayesian optimization (BO). We demonstrate a semi-autonomous BO loop which instantiates discrete dislocation dynamics simulations whose initial conditions are automatically chosen to optimize the uncertainty of a model CP flow rule. Our self-guided computational pipeline efficiently generated a dataset and corresponding model whose error, uncertainty, and physical feature sensitivities were validated with comparison to an independent dataset four times larger, demonstrating a valuable and efficient active learning implementation readily transferable to similar material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Probing anisotropies of the Stochastic Gravitational Wave Background with LISA

Here, we investigate the sensitivity of the Laser Interferometer Space Antenna (LISA) to the anisotropies of the Stochastic Gravitational Wave Background (SGWB). We first discuss the main astrophysical and cosmological sources of SGWB which are characterized by anisotropies in the GW energy density, and we build a Signal-to-Noise estimator to quantify the sensitivity of LISA to different multipoles. We then perform a Fisher matrix analysis of the prospects of detectability of anisotropic features with LISA for individual multipoles, focusing on a SGWB with a power-law frequency profile. We compute the noise angular spectrum taking into account the specific scan strategy of the LISA detector. We analyze the case of the kinematic dipole and quadrupole generated by Doppler boosting an isotropic SGWB. We find that β Ω GW ~ 2 × 10 -11 is required to observe a dipolar signal with LISA. The detector response to the quadrupole has a factor ~ 10 3 β relative to that of the dipole. The characterization of the anisotropies, both from a theoretical perspective and from a map-making point of view, allows us to extract information that can be used to understand the origin of the SGWB, and to discriminate among distinct superimposed SGWB sources.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Antiproton bounds on dark matter annihilation from a combined analysis using the DRAGON2 code

Abstract Early studies of the AMS-02 antiproton ratio identified a possible excess over the expected astrophysical background that could be fit by the annihilation of a weakly interacting massive particle (WIMP). However, recent efforts have shown that uncertainties in cosmic-ray propagation, the antiproton production cross-section, and correlated systematic uncertainties in the AMS-02 data, may combine to decrease or eliminate the significance of this feature. We produce an advanced analysis using the DRAGON2 code which, for the first time, simultaneously fits the antiproton ratio along with multiple secondary cosmic-ray flux measurements to constrain astrophysical and nuclear uncertainties. Compared to previous work, our analysis benefits from a combination of: (1) recently released AMS-02 antiproton data, (2) updated nuclear fragmentation cross-section fits, (3) a rigorous Bayesian parameter space scan that constrains cosmic-ray propagation parameters.We find no statistically significant preference for a dark matter signal and set strong constraints on WIMP annihilation tobb̅, ruling out annihilation at the thermal cross-section for dark matter masses below ∼ 200 GeV. We do find a positive residual that is consistent with previous work, and can be explained by a ∼ 70 GeV WIMP annihilating below the thermal cross-section. However, our default analysis finds this excess to have a local significance of only 2.8σ, which is decreased to 1.8σwhen the look-elsewhere effect is taken into account.

Astronomy & Astrophysics↗
DOE OSTI2024

Reducing measurement costs by recycling the Hessian in adaptive variational quantum algorithms

Abstract Adaptive protocols enable the construction of more efficient state preparation circuits in variational quantum algorithms (VQAs) by utilizing data obtained from the quantum processor during the execution of the algorithm. This idea originated with Adaptive Derivative-Assembled Problem-Tailored variational quantum eigensolver (ADAPT-VQE), an algorithm that iteratively grows the state preparation circuit operator by operator, with each new operator accompanied by a new variational parameter, and where all parameters acquired thus far are optimized in each iteration. In ADAPT-VQE and other adaptive VQAs that followed it, it has been shown that initializing parameters to their optimal values from the previous iteration speeds up convergence and avoids shallow local traps in the parameter landscape. However, no other data from the optimization performed at one iteration is carried over to the next. In this work, we propose an improved quasi-Newton optimization protocol specifically tailored to adaptive VQAs. The distinctive feature in our proposal is that approximate second derivatives of the cost function are recycled across iterations in addition to optimal parameter values. We implement a quasi-Newton optimizer where an approximation to the inverse Hessian matrix is continuously built and grown across the iterations of an adaptive VQA. The resulting algorithm has the flavor of a continuous optimization where the dimension of the search space is augmented when the gradient norm falls below a given threshold. We show that this inter-optimization exchange of second-order information leads the approximate Hessian in the state of the optimizer to be consistently closer to the exact Hessian. As a result, our method achieves a superlinear convergence rate even in situations where the typical implementation of a quasi-Newton optimizer converges only linearly. Our protocol decreases the measurement costs in implementing adaptive VQAs on quantum hardware as well as the runtime of their classical simulation.

Ramôa, Mafalda (ORCID:0000000302187801)↗
DOE OSTI2020

Indicator-directed Dynamic Power Management for Iterative Workloads on GPU-Accelerated Systems

Modern high-performance and warehouse computing centers show strong interest in minimizing system power consumption while satisfying customers’ quality of service (QoS). Dynamic voltage and frequency scaling (DVFS) is effective for achieving this goal. Nevertheless, automating the process online and making it transparent to users must address three major challenges: (1) Complexity — today’s hardware components (e.g., CPUs, GPUs, memory, network, etc.) can be configured in several or dozens of frequency/voltage states for satisfying divergent system demands. Given their combination and the emergence of heterogeneity, searching the optimal configuration in the design space online can be timing consuming. (2) QoS guarantee — user-defined objectives such as power constraint and performance target must be monitored, predicted and ensured at the best effort. (3) Adaptability — various known and unknown workloads run on systems. Workloads characteristics should be quickly determined and configurations dynamically adjusted in accord with workloads and QoS. In this work, we focus on applications exhibiting an interesting feature – iterative or periodic, which is common among conventional HPC and emerging machine learning workloads. We propose an online dynamic power-performance (ODPP) management framework to dynamically adjust GPU DVFS configurations to meet performance and power objectives and constraints, without any code annotation or intrusion. Particularly, ODPP extracts the performance and power indicators for applications from their resources utilization profiles in a short episode. It further automatically constructs an accurate model that infers from the indicators how the application's performance and power vary with GPU core and memory frequencies. Aided with the model, for both seen and unseen applications, ODPP can quickly determine the most appropriate DVFS configuration for their execution. We evaluate ODPP on an NVIDIA GPU using multiple exascale computing (ECP) and deep learning applications.

Zou, Pengfei↗
DOE OSTI2021

4D-STEM of Beam-Sensitive Materials

We report that a scanning electron nanobeam diffraction, or 4D-STEM (four-dimensional scanning transmission electron microscopy), is a flexible and powerful approach to elucidate structure from "soft" materials that are challenging to image in the transmission electron microscope because their structure is easily damaged by the electron beam. In a 4D-STEM experiment, a converged electron beam is scanned across the sample, and a pixelated camera records a diffraction pattern at each scan position. This four-dimensional data set can be mined for various analyses, producing maps of local crystal orientation, structural distortions, crystallinity, or different structural classes. Holding the sample at cryogenic temperatures minimizes diffusion of radicals and the resulting damage and disorder caused by the electron beam. The total fluence of incident electrons can easily be controlled during 4D-STEM experiments by careful use of the beam blanker, steering of the localized electron dose, and by minimizing the fluence in the convergent beam thus minimizing beam damage. This technique can be applied to both organic and inorganic materials that are known to be beam-sensitive; they can be highly crystalline, semicrystalline, mixed phase, or amorphous. One common example is the case for many organic materials that have a π-π stacking of polymer chains or rings on the order of 3.4-4.2 Å separation. If these chains or rings are aligned in some regions, they will produce distinct diffraction spots (as would other crystalline spacings in this range), though they may be weak or diffuse for disordered or weakly scattering materials. We can reconstruct the orientation of the π-π stacking, the degree of π-π stacking in the sample, and the domain size of the aligned regions. This Account summarizes illumination conditions and experimental parameters for 4D-STEM experiments with the goal of producing images of structural features for materials that are beam-sensitive. We will discuss experimental parameters including sample cooling, probe size and shape, fluence, and cameras. 4D-STEM has been applied to a variety of materials, not only as an advanced technique for model systems, but as a technique for the beginning microscopist to answer materials science questions. It is noteworthy that the experimental data acquisition does not require an aberration-corrected TEM but can be produced on a variety of instruments with the right attention to experimental parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Supramolecular Assembly of Multielement Ribbon-like Structures Derived from Halide Perovskites

Halide perovskites are crucial materials with broad applications owing to their exceptional optoelectronic properties. Vacancy-ordered double perovskites, featuring highly tunable transition metal sites, enable controllable optoelectronic properties through multielement compositional design. Here, in this study, we introduced 18-crown-6 into the vacancy-ordered double perovskites system and developed two-dimensional ribbon-like single crystals (18C6@K) 2 {PtSnTeIrRe} 1 Cl 6 via an antisolvent supramolecular assembly method, demonstrating morphology modulation through multielement composition design. The crystals crystallize in the centrosymmetric space group $P\bar{1}$. The dumbbell-shaped structural units (crown ether@A)2MX6 pack along a and b axes to form a 2-dimensional (2D) monolayer, and these monolayers further stack along the c axis to generate the ribbon-like single crystals. Energy-dispersive X-ray spectroscopy (EDX) qualitatively confirmed the uniform distribution of the five transition metals throughout the crystal, while inductively coupled plasma atomic emission spectroscopy (ICP–AES) quantitatively verified their atomic ratios. We further investigated the origin of the morphology, distinct from the previously reported cube-like single crystals with the $R\bar{3}$ space group. When acetonitrile was used as the solvent, three-dimensional crystals with $R\bar{3}$ symmetry were obtained, whereas dimethylformamide (DMF) was essential for forming two-dimensional ribbon-like single crystals. The essential role of DMF could be ascribed to its capability to maintain a higher concentration of the building blocks. Moreover, Ir 4+ and Pt 4+ cations also played critical roles in inducing the two-dimensional ribbon-like morphology. The three-element (18C6@K) 2 {PtSnTe}1Cl 6 single crystals exhibited bright yellow emission under 375 nm laser excitation, demonstrating the tunability of optoelectronic properties of this class of material.

Zhu, Heqing [University of California, Berkeley, C↗
DOE OSTI2024

A hybrid-kinetic simulation tool for non-thermal warm x-ray z-pinch sources, with gas-puff and wire array exemplars

Increasing the fluence of z-pinch x-ray radiation sources above ∼ 10 keV has been a long-standing goal for scientists at Sandia National Laboratories’ Z Machine. Optimizing sources for non-thermal “cold Kα” emission in higher atomic-number materials appears to be a promising path to increase warm x-ray yield. However, this emission is generated by supra-thermal electrons, which are not treated in the magnetohydrodynamic (MHD) codes that are typically used in z-pinch source development. MHD codes do not allow for charge separation or space-charge-generated electric fields, and constrain particle kinematics to Maxwellian distributions. The kinetic codes which do accommodate discrete, non-thermal energy distributions are computationally prohibitive when modeling plasmas near solid density and when modeling/tracking higher ionization states. Thus, modeling non-thermal z-pinch sources requires a new simulation tool. In this report, we present a new hybrid modeling capability that uses the fast features of MHD-type particles to the greatest extent possible, then transitions to the slower but more complete kinetic particle treatment to correctly capture the particle energy spectra that generate non-thermal emission. This capability is founded on the fully-relativistic particle-in-cell code Chicago, which already includes fluid particle treatments. The governing equations and hybrid methodology presented here are applied in simulations of an argon gas-puff and a molybdenum wire-array to provide preliminary code validation. The argon simulation is compared to measured implosion times and yields from Jones et al., Phys. Plasmas 22, 020706 (2015). The simulated x-ray yield is within 25% of measurements and the implosion times agree within a few percent. The molybdenum wire array simulation captures the implosion timing reported in Hansen et al., Phys. Plasmas 21, 031202 (2014), but work is needed to verify the available EOS table. These exemplar simulations represents the type of non-thermal sources that will be developed using the hybrid code capability going forward.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Data-Driven Optimization of the Processing Window for 316H Components Fabricated Using Laser Powder Bed Fusion

The Advanced Materials and Manufacturing Technologies Program is focused on accelerating the development and deployment of advanced materials and components fabricated via additive manufacturing with a specific focus on laser powder bed fusion (LPBF). As an initial case study, the program has selected 316H stainless steel (SS) as an initial material around which to develop a code case development strategy. This strategy involves two parallel approaches: (1) an equivalency approach whereby round-robin testing across multiple collaborating laboratories demonstrates repeatability in processing and direct comparisons with conventional wrought 316H material and (2) a revolutionary approach to code qualification combining in situ data collection and high-fidelity modeling to capture, predict, and bound the performance of LPBF 316HSS components. As part of this campaign, this work package has initiated an extensive process optimization campaign across three laboratories, each printing variations of LPBF 316HSS using three different LPBF units (Concept Laser, EOS, and Renishaw). In FY23, ORNL has focused on unique experimental designs spanning wide ranges in energy inputs and turning knobs such as scan speed, laser power, hatch spacing, layer thickness, spot size, scan rotation, and more. On the Concept Laser M2, 72 different combinations of processing variables were investigated with duplicate samples and different powder compositions. In total, 252 samples were printed with combined in situ sensing data. A parallel design of experiments was conducted on the Renishaw AM400 with an additional 390 printed specimens for analysis. All 642 miniature specimens, each with unique features included in each print to capture geometry-related heterogeneity, were subjected to high-throughput x-ray computed tomography (XCT) analysis to enable the downselection of specific processing parameters of interest. Then, using electrical discharge machining (EDM), miniature tensile specimens were extracted for mechanical testing and microscopy investigations. From the analysis performed in FY23, it was found that powder composition drastically affects the resulting microstructure and mechanical performance of 316SS. Specifically, changing from 316L to 316HSS powder results in a wide range of grain sizes with varying degrees of preferred grain orientation, which increases as a function of energy density. It was also found that due to stored heat in thin fin–type features, large microstructural differences can be seen within one part printed with one set of processing parameters. These variations in microstructure features, including grain size, the nanoscale dislocation structure, and grain texture, will all affect the irradiation performance and high-temperature mechanical performance of LPBF 316HSS parts. Two sets of concept laser processing parameters, spanning both refined and columnar grain structures, were scaled to print larger 316H builds for campaign testing (high-temperature creep and irradiation). In addition, at least two optimized processing parameter sets were identified for the Renishaw AM400 for round-robin testing in FY24 with Argonne National Laboratory. Future work includes printing samples using identical parameters identified by partner institutions, providing material for corrosion and high-temperature mechanical testing, and continuing evaluations of heterogeneity in larger printed parts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Data-Driven Optimization of the Processing Window for 316H Components Fabricated Using Laser Powder Bed Fusion

The Advanced Materials and Manufacturing Technologies Program is focused on accelerating the development and deployment of advanced materials and components fabricated via additive manufacturing with a specific focus on laser powder bed fusion (LPBF). As an initial case study, the program has selected 316H stainless steel (SS) as an initial material around which to develop a code case development strategy. This strategy involves two parallel approaches: (1) an equivalency approach whereby round-robin testing across multiple collaborating laboratories demonstrates repeatability in processing and direct comparisons with conventional wrought 316H material and (2) a revolutionary approach to code qualification combining in situ data collection and high-fidelity modeling to capture, predict, and bound the performance of LPBF 316HSS components. As part of this campaign, this work package has initiated an extensive process optimization campaign across three laboratories, each printing variations of LPBF 316HSS using three different LPBF units (Concept Laser, EOS, and Renishaw). In FY23, ORNL has focused on unique experimental designs spanning wide ranges in energy inputs and turning knobs such as scan speed, laser power, hatch spacing, layer thickness, spot size, scan rotation, and more. On the Concept Laser M2, 72 different combinations of processing variables were investigated with duplicate samples and different powder compositions. In total, 252 samples were printed with combined in situ sensing data. A parallel design of experiments was conducted on the Renishaw AM400 with an additional 390 printed specimens for analysis. All 642 miniature specimens, each with unique features included in each print to capture geometry-related heterogeneity, were subjected to high-throughput x-ray computed tomography (XCT) analysis to enable the downselection of specific processing parameters of interest. Then, using electrical discharge machining (EDM), miniature tensile specimens were extracted for mechanical testing and microscopy investigations. From the analysis performed in FY23, it was found that powder composition drastically affects the resulting microstructure and mechanical performance of 316SS. Specifically, changing from 316L to 316HSS powder results in a wide range of grain sizes with varying degrees of preferred grain orientation, which increases as a function of energy density. It was also found that due to stored heat in thin fin–type features, large microstructural differences can be seen within one part printed with one set of processing parameters. These variations in microstructure features, including grain size, the nanoscale dislocation structure, and grain texture, will all affect the irradiation performance and high-temperature mechanical performance of LPBF 316HSS parts. Two sets of concept laser processing parameters, spanning both refined and columnar grain structures, were scaled to print larger 316H builds for campaign testing (high-temperature creep and irradiation). In addition, at least two optimized processing parameter sets were identified for the Renishaw AM400 for round-robin testing in FY24 with Argonne National Laboratory. Future work includes printing samples using identical parameters identified by partner institutions, providing material for corrosion and high-temperature mechanical testing, and continuing evaluations of heterogeneity in larger printed parts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Oxidation Driven Thin‐Film Solid‐State Metal Dealloying Forming Bicontinuous Nanostructures

Abstract Solid‐state metal dealloying (SSMD) is a promising method for fabricating nanoscale metallic composites and nanoporous metals across a range of materials. Thin‐film SSMD is particularly attractive due to its ability to create fine features via solid‐state interfacial reactions within a thin‐film geometry, which can be integrated into devices for various applications. This work examines a new dealloying couple, namely the Nb–Al alloy with the dealloying agent Sc, as previously predicted in the machine‐learning (ML) models. Prior ML predictions aimed to guide the design of nanoarchitectured materials through dealloying, relying on intuition‐driven discovery within a large parameter space. However, this work reveals that at the nanoscale, the involvement of oxygen in thin film processing may instead drive the dealloying process, resulting in the formation of bicontinuous nanostructures similar to those formed by metal‐agent dealloying. The phase evolution, as well as chemical and morphological changes, are closely analyzed using a combination of X‐ray absorption spectroscopy, diffraction, and scanning transmission electron microscopy to understand the mechanisms behind nanostructure formation. The findings suggest a potential pathway for utilizing oxygen to drive the formation of bicontinuous metal–metal oxide nanocomposites, paving the way for further development of functional nanoporous materials in diverse fields.

36 MATERIALS SCIENCE↗
DOE OSTI2022

From Protein Design to the Energy Landscape of a Cold Unfolding Protein

Understanding protein folding is crucial for protein sciences. The conformational spaces and energy landscapes of cold (unfolded) protein states, as well as the associated transitions, are hardly explored. Furthermore, it is not known how structure relates to the cooperativity of cold transitions, if cold and heat unfolded states are thermodynamically similar, and if cold states play important roles for protein function. We created the cold unfolding 4-helix bundle DCUB1 with a de novo designed bipartite hydrophilic/hydrophobic core featuring a hydrogen bond network which extends across the bundle in order to study the relative importance of hydrophobic versus hydrophilic protein–water interactions for cold unfolding. Structural and thermodynamic characterization resulted in the discovery of a complex energy landscape for cold transitions, while the heat unfolded state is a random coil. Below ~0 °C, the core of DCUB1 disintegrates in a largely cooperative manner, while a near-native helical content is retained. The resulting cold core-unfolded state is compact and features extensive internal dynamics. Below -5 °C, two additional cold transitions are seen, that is, (i) the formation of a water-mediated, compact, and highly dynamic dimer, and (ii) the onset of cold helix unfolding decoupled from cold core unfolding. Our results suggest that cold unfolding is initiated by the intrusion of water into the hydrophilic core network and that cooperativity can be tuned by varying the number of core hydrogen bond networks. Protein design has proven to be invaluable to explore the energy landscapes of cold states and to robustly test related theories.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Resonant x-ray emission across the L 3 edge of uranium compounds

A narrow bandwidth x-ray beamline and a multi-crystal von Hamos spectrometer were used to record x-ray absorption and x-ray emission (XES) across the uranium L 3 edge of UO 2 , UO 3 , Cs 2 UO 2 Cl 4 , and Cs 2 UCl 6 . Measurements were made over 17150–17250 eV with an instrumental resolution of ∼2 eV. This resolution allowed the use of Lorentzian peak fits to the L 3 N 4 and L 3 N 5 characteristic x-ray fluorescence lines that have ∼12–13 eV lifetime widths. The fluorescence yields of the four compounds display strong white lines near threshold and multiple scattering features at higher energies. The XES spectra were fit with three Lorentzians, two for the L 3 N 4 and L 3 N 5 lines and one for inelastic scattering by 2p–6d excitations and 4d–6d final states. The intensities of the white lines were largely due to the inelastic scattering component. To support the measurements, relativistic equation-of-motion coupled-cluster and restricted active space configuration interaction calculations were performed for uranium core-excitation energies in Cs 2 UO 2 Cl 4 and Cs 2 UCl 6 . These calculations with rigorous treatments of relativistic effects are shown to provide accurate uranium L 3 -edge binding energies, L 3 N 5 emission energies, as well as the energy losses in the inelastic scattering process. The measured and calculated results show variations between compounds with U(IV) oxidation states that contain 6d 0 5f 2 electrons in their ground configurations (UO 2 and Cs 2 UCl 6 ) compared with U(VI) compounds (UO 3 and Cs 2 UO 2 Cl 4 ) with empty 5f and 6d configurations.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Investigating resource-efficient neutron/gamma classification ML models targeting eFPGAs

There has been considerable interest and resulting progress in implementing machine learning (ML) models in hardware over the last several years from the particle and nuclear physics communities. A big driver has been the release of the Python package, hls4ml, which has enabled porting models specified and trained using Python ML libraries to register transfer level (RTL) code. So far, the primary end targets have been commercial field-programmable gate arrays (FPGAs) or synthesized custom blocks on application specific integrated circuits (ASICs). However, recent developments in open-source embedded FPGA (eFPGA) frameworks now provide an alternate, more flexible pathway for implementing ML models in hardware. These customized eFPGA fabrics can be integrated as part of an overall chip design. In general, the decision between a fully custom, eFPGA, or commercial FPGA ML implementation will depend on the details of the end-use application. In this work, we explored the parameter space for eFPGA implementations of fully-connected neural network (fcNN) and boosted decision tree (BDT) models using the task of neutron/gamma classification with a specific focus on resource efficiency. We used data collected using an AmBe sealed source incident on Stilbene, which was optically coupled to an OnSemi J-series silicon photomultiplier (SiPM) to generate training and test data for this study. We investigated relevant input features and the effects of bit-resolution and sampling rate as well as trade-offs in hyperparameters for both ML architectures while tracking total resource usage. The performance metric used to track model performance was the calculated neutron efficiency at a gamma leakage of 10 -3 . The results of the study will be used to aid the specification of an eFPGA fabric, which will be integrated as part of a test chip.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Wannier representation of Floquet topological states

A universal feature of topological insulators is that they cannot be adiabatically connected to an atomic limit, where individual lattice sites are completely decoupled. This property is intimately related to a topological obstruction to constructing a localized Wannier function from Bloch states of an insulator. In this work, we generalize this characterization of topological phases toward periodically driven systems. We show that nontrivial connectivity of hybrid Wannier centers in momentum space and time can characterize various types of topology in periodically driven systems, which include Floquet topological insulators, anomalous Floquet topological insulators with micromotion-induced boundary states, and gapless Floquet states realized with topological Floquet operators. In particular, nontrivial time dependence of hybrid Wannier centers indicates impossibility of continuous deformation of a driven system into an undriven insulator, and a topological Floquet operator implies an obstruction to constructing a generalized Wannier function which is localized in real and frequency spaces. Our results pave a way to a unified understanding of topological states in periodically driven systems as a topological obstruction in Floquet states.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Universal model of Floquet operator Krylov space

It is shown that the stroboscopic time evolution under a Floquet unitary, in any spatial dimension, and of any Hermitian operator, can be mapped to an operator Krylov space, which is identical to that generated by the edge operator of the noninteracting Floquet transverse-field Ising model (TFIM) in one-spatial dimension, and with inhomogeneous Ising and transverse field couplings. The latter has four topological phases reflected by the absence (topologically trivial) or presence (topologically nontrivial) of edge modes at 0 and/or π quasienergies. It is shown that the Floquet dynamics share certain universal features characterized by how the Krylov parameters vary in the topological phase diagram of the Floquet TFIM with homogeneous couplings. Furthermore, these results are highlighted through examples, all chosen for numerical convenience to be in one spatial dimension: nonintegrable Floquet spin 1/2 chains and Floquet Z 3 clock model where the latter hosts period-tripled edge modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗