Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

The role of technology as air transportation faces the fuel situation

The discussion of system integrators whose task is to identify the application and payoff of various research disciplines is limited to aircraft of the subsonic commerical transport type. The aim is to provide a brief description of the existing fuel situation, the progress made in fuel reduction, near-term prospects for further reductions, and long-term prospects for even further reductions, all primarily from the technology point of view.

Driver, C.↗
NASA NTRS1981

Flow field investigation of atmospheric braking for high drag vehicles with forward facing jets

Flow field phenomena associated with a supersonic jet issuing upstream into a hypervelocity flow field were investigated experimentally in support of a new space vehicle aerobraking concept developed by Boeing for Orbital Transfer Vehicles (OTV's). Tests were made on OTV models in the NASA Langley 22 in., Mach 20 helium tunnel with jet exit Mach numbers from 1.0 to 6.18 and ballute half angles of 45 and 60 deg. Force data were taken at zero angle of attack to determine the effect of ballute angle, jet Mach number and jet flow rate on vehicle drag. Bow shock structures were examined in terms of flow steadiness to define acceptable jet flow rate regimes for use in drag modulation. Limited tests were made to obtain pressure and temperature distributions around the ballute and to determine the ballute center of pressure. Test results are presented and discussed relative to OTV application and similar previous experimental investigations.

Grenich, A. F.↗
NASA NTRS1981

A title-gap flow model for use in aerodynamic loads assessment of space shuttle thermal protection system: Parallel gap faces

The problem of predicting aerodynamic loads on the insulating tiles of the space shuttle thermal protection system (TPS) is discussed and seen to require a method for predicting pressure and mass flux in the gaps between tiles. A mathematical model of the tile-gap flow is developed, based upon a slow viscous (Stokes) flow analysis, and is verified against experimental data. The tile-gap pressure field is derived from a solution of the two-dimensional Laplace equation; the mass-flux vector is then calculated from the pressure gradient. The means for incorporating this model into a lumped-parameter network analogy for porous-media flow is given. The means for incorporating this model into a lumped-parameter network analogy for porous-media flow is given. The flow model shows tile-gap mass flux to be very sensitive to the gap width indicating a need for coupling the TPS flow and tile displacement calculation. Analytical and experimental work to improve TPS flow predictions and a possible shuttle TPS hardware modification are recommended.

Dwoyer, D. L.↗
NASA NTRS1982

Use of a variable exposure photographic pyrometer to measure surface temperatures on a hemispherical-face model

The use of a photographic pyrometer for nonintrusive measurement of high temperature surfaces in a wind tunnel test is described. The advantages of the pyrometer for measuring surfaces whose unique shape makes use of thermocouples difficult are pointed out. The use of computer operated densitometers or optical processors for the data reduction is recommended.

Kantsios, A. G.↗
NASA NTRS1982

The effects on the MHD stability of field line tying to the end faces of a cylindrical magnetic loop

The ideal MHD energy equation is used to derive a stability equation for a specific class of perturbations, in an examination of magnetic loop MHD stability which takes field line tying at its root points into account. It is found that the field line tying effect is negligible to the m=1 kink mode, but important to the localized modes, in the case of a loop of aspect ratio greater than 10. The stability criterion for high-m value localized modes is derived, and compared with the Suydam criterion, to show that there are two field line tying effects for the perturbation of the class studied: (1) a field line bending effect, which is always stabilizing, and (2) a shear effect which is stabilizing or destabilizing depending on the sign of the gradient of the potential magnetic field. The net effect of field line tying is determined by the sum of these two effects.

An, C. Y.↗
NASA NTRS1982

Moonport to Spaceport - The changing face at KSC

The facilities and planned operations of the Orbiter Processing Facility (OPF) at Kennedy Space Center are described, noting an eventual goal of five to six weeks turnaround for the vehicle. The dual-bay OPF is being developed to handle processing of two Orbiters in parallel. Once in the facility, all fuels are drained, parts and systems needing maintenance are removed for shipping and refurbishing or repair in-place, hazardous cargo is secured, and a thorough visual inspection is made of all accessible areas. Mobile launch platforms previously used as transports in the Apollo program have been upgraded and modernized and serve for the Shuttle launch preparations. Details of launch procedures are outlined, and the reduction of launch personnel to 45 persons is mentioned. Finally, details of payload insertion and mating with the Spacelab modules are described, along with the progress on the test flights.

Boggs, W. H.↗
NASA NTRS1981

Hostile environmental conditions facing candidate alloys for the automotive Stirling engine

The materials research program in support of the Automotive Stirling Engine Project focuses on the hot heater head of the engine including the heater head tubes, cylinders, and regenerator housings, which are considered to be the most critical components from a materials viewpoint. The specific areas of investigation in the program involve hydrogen permeability testing, doping of the hydrogen working fluid to reduce permeability rates, oxidation/corrosion studies, creep-rupture evaluation, and assessing effects of hydrogen environment on mechanical properties. Emphasis is placed on the materials challenges that result from the use of hydrogen as the working fluid. Previously announced in STAR as N81-26236

Stephens, J. R.↗
NASA NTRS1984

Composites for large transports - Facing the challenge

NASA has undertaken development and test programs in collaboration with the large transport aircraft construction industry, in order to remove existing barriers to the use of composite material primary structures and to assess their advantages in terms of both acquisition cost and mission performance. These programs are expected to reach design technology readiness for wing and fuselage structures by 1988, paving the way for the validation of design and manufacturing methods in the early 1990s. While composites promise a reduction in fuselage manufacturing costs, it is judged that the relative cost of a metallic wing will be more difficult to surpass. Nevertheless, a 40 percent wing weight saving may more than compensate for increased wing structure cost.

Bohon, H. L.↗
NASA NTRS1984

The many faces of Capella - A search for rotational modulations and a study of systematic velocities of emission lines in the ultraviolet

The UV spectra of Capella were monitored for fluctuations using IUE instrumentation, and radial velocities of the emission lines were determined. The possible fluctuations were studied from March through April 1981, and radial velocity data were taken over six days in 1982. The Capella surface activity emissions proved to be steady, while redshifts from high excitation were found in the photospheric plasma. Downflows of 100,000 K plasma in the stellar transition zone could produce the redshifts. The FWHMs of the emission lines exceeded the redshift by an order of magnitude, suggesting that the observed excitations could be only averaged values of the dynamics of the outer atmosphere of Capella.

Ayres, T. R.↗
NASA NTRS1986

Variable friction secondary seal for face seals

Vibration and stability of a primary seal ring is controlled by a secondary seal system. An inflatable bladder which forms a portion of the secondary seal varies the damping applied to this seal ring. The amplitude of vibration of the primary seal ring is sensed with a proximity probe that is connected to a microprocessor in a control system. The bladder pressure is changed by the control system to mitigate any sensed instability or vibration.

Dirusso, E.↗
NASA NTRS1985

Numerical simulation of a turbulent flame stabilized behind a rearward-facing step

Flow of combustible mixtures in a plane channel past a smooth contraction followed by an abrupt expansion, in a typical dump combustor configuration, is modeled by a two-dimensional numerical technique based on the random vortex method. Both the inert and the reacting case are considered. In the latter, the flame is treated as an interface, self-advancing at a prescribed normal burning speed, while the dynamic effects of expansion due to the exothermicity of combustion are expressed by volumetric source lines delineated by its front. Solutions are shown to be in satisfactory agreement with experimental results, especially with respect to global properties such as the average velocity profiles and the reattachment length. The stochastic turbulent velocity components manifest interesting differences, especially near the walls where three-dimensional effects of turbulence are expected to be of importance.

Hsiao, C. C.↗
NASA NTRS1987

Three-dimensional numerical predictions of the flow behind a rearward-facing-step in a supersonic combustor

A CFD code was developed to compute the mixing and combustion of hydrogen fuel in the turbulent flow fields of scramjets. The code is based on the complete Reynold's time-averaged three-dimensional Navier-Stokes equations, and chemical species equations. The code includes a global finite rate hydrogen-air chemical reaction model and the Baldwin-Lomax (1978) turbulence model. The validity of this CFD code was demonstrated by comparing computed results from the code with existing data for three configurations, each containing an important feature of the scramjet combustor flow. The code was then applied to the reacting flow field in a complex combustor model in which hydrogen fuel was injected transversely into a supersonic hot airstream through several fuel injectors.

Uenishi, K.↗