Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energetic material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Visible-Light Photoinitiation of (Meth)acrylate Polymerization with Autonomous Post-Conversion

Conversion plateaus rapidly in radical photopolymerizations (RPPs) following discontinuation of irradiation due to rapid termination of reactive radicals, which restricts the wider use of RPPs in applications that involve nonuniform light access including those with attenuated light transmission or irregular surfaces. Based on our recent report of a radical dark-curing photoinitiator (DCPI) that continues polymerization beyond the cessation of irradiation by enabling latent redox initiation with photo-released amine in the presence of a suitable oxidant, we developed a new DCPI with an absorption spectrum that extends well into the visible range. Our design process involved a series of computational investigations of candidate molecules, including a systematic study of substituents and their position-dependent effects on absorption characteristics, electronic transitions, and the photochemical mechanism and its associated energetics. Our quantum chemical computations identified the target compound 5,7-dimethoxy-6-bromo-3-aroylcoumarin-DMPT/BPh4 and predicted that it would facilitate the dark-curing mechanism by concurrent photo-radical generation and photo-induced release of an efficient redox reductant under visible irradiation. This reductant-tethered chromophore was then synthesized and optically characterized with UV–vis spectroscopy that revealed its strong visible-light absorption with a molar absorptivity of 5710 M–1 cm–1 at 405 nm and 50 M–1 cm–1 at 455 nm. We then demonstrated extensive dark-curing of >35% additional conversion over 25 min following brief activation of the shelf-stable one-part system by irradiation with a 455 nm LED that was ceased at 20% conversion. In contrast, shuttering irradiation of the control formulation at that same point resulted in immediate cessation of conversion, which plateaued at 20%. We determined a remarkable initiator efficiency of 2.82 that results from the additional redox-generated radicals with a 77% photo-reductant generation quantum yield. The combination of superior photo- and dark-curing efficiencies of this new visible DCPI is expected to open new application opportunities in RPP, especially those involving resins that are highly light attenuating, surfaces that possess irregular features that produce uneven irradiance, and production lines where continued dark-curing downstream of the light activation step enhances line efficiencies.

absorption spectrum↗
DOE OSTI2024

Thermodynamics of Tritium Trapping by Point Defects in Intermetallic Al 12 (TM) 2.35 Aluminide Coating Phase

Density functional theory simulations have been carried out to investigate the potential for tritium trapping by metal vacancies in intermetallic Al 12 (TM) 2.35 phase (TM = Fe, Cr, and Ni) as function of temperature and tritium partial pressure. It was found that tritium could be favorably trapped by Fe and Ni vacancies and not favorably trapped by Al and Cr vacancies. However, due to the presence of partially occupied Al sites in bulk Al 12 (TM) 2.35 , leading to the approximate number of ~255 Al atoms in the unit cell, 86 sites were found energetically favorable to the creation of an Al vacancy. While adding a tritium atom in an Al vacancy is not energetically favorable, the tritiated defect still has a negative Gibbs free energy because the energy gain for creating an Al vacancy overcome the energy cost of adding the tritium species. Based on the calculated Gibbs free energy, the first tritiation of a metal vacancy, at conditions relevant to in-reactor operations, should be more favorable for Al, followed Fe, Ni, and Cr vacancies. By comparing the behavior of tritium in Al 12 (TM) 2.35 with previously studied Fe-Al coating phases (i.e., FeNiAl 5 , Fe 4 Al 13 , and Fe 2 Al 5.6 ), we found that there is a correlation between interstitial tritium solubility and the potential for vacancy trapping. The current trend suggests that if the insertion of an interstitial tritium cost more than 0.3 eV, then trapping by metal vacancies should be preferred. By combining the simulations results obtained to date, we noticed different trapping mechanisms of tritium in the Al coating. Tritium is mostly trapped by Fe and Ni vacancies in the outer Fe-Al coating phase Al 12 (TM) 2.35 while tritium should be preferentially trapped by Al and Fe vacancies for the inner Fe-Al coating phases (FeNiAl 5 , Fe 4 Al 13 , Fe 2 Al 5.6 ). Altogether, these studies show that tritium interacts differently with the various Fe-Al aluminide phases, they also suggest that tritium trapping and retention could be more efficient if metal defects are present and if the solubility of interstitial tritium in the different phases is low.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Compositional patterning in irradiated alloys: Effective potentials and effective interfacial energy

Compositional patterning (CP) in binary alloys during energetic particle irradiation is studied using a kinetic model that considers two competing kinetic processes, a thermally activated one promoting macroscopic phase separation (MPS) of the concentration field c(r,t) and a forced one resulting in finite-range random atomic mixing. The forced mixing is modeled by a Gaussian relocation distribution with a characteristic distance R. A series of approximate kinetic models are introduced by expanding the mixing function into a series of n terms, thus replacing the non-local evaluations of the concentration field c(r'-r,t) by local derivatives of c(r,t). This approach makes it possible to obtain exact effective potentials and build steady-state diagrams for each order-n model. Phase field (PF) simulations using these order-n models reveal that near the onset of patterning, phase evolution is accurately described using an order-3 model, which changes smoothly from an extended Cahn-Hilliard free energy in the MPS regime to a one-mode Swift-Hohenberg functional in the CP regime. Deeper into the patterning regime, higher-order models are required to achieve convergence, yielding square-like concentration profiles characteristic of a strong segregation regime. These higher-order effective free energies are analogous to multimodal Swift-Hohenberg functionals. Here, a new definition for the effective interfacial energy is proposed in the CP regime, since the interfacial area is no longer an excess quantity in that regime, precluding the use of the standard thermodynamic definition of interfacial energy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Calibration and characterization of the line-VISAR diagnostic at the HED-HIBEF instrument at the European XFEL

In dynamic-compression experiments, the line-imaging Velocity Interferometer System for Any Reflector (VISAR) is a well-established diagnostic used to probe the velocity history, including wave profiles derived from dynamically compressed interfaces and wavefronts, depending on material optical properties. Knowledge of the velocity history allows for the determination of the pressure achieved during compression. Such a VISAR analysis is often based on Fourier transform techniques and assumes that the recorded interferograms are free from image distortions. In this paper, we describe the VISAR diagnostic installed at the HED-HIBEF instrument located at the European XFEL along with its calibration and characterization. It comprises a two-color (532, 1064 nm), three-arm (with three velocity sensitivities) line imaging system. We provide a procedure to correct VISAR images for geometric distortions and evaluate the performance of the system using Fourier analysis. We finally discuss the spatial and temporal calibrations of the diagnostic. As an example, we compare the pressure extracted from the VISAR analysis of shock-compressed polyimide and silicon.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

High Thermoelectric Performance and Defect Energetics of Multipocketed Full Heusler Compounds

We report a first-principles density-functional study of electron-phonon interactions in and thermoelectric transport properties of the full Heusler compounds Sr 2 BiAu and Sr 2 SbAu. Our results show that ultrahigh intrinsic bulk thermoelectric performance across a wide range of temperatures is physically possible and point to the presence of multiply degenerate and highly dispersive carrier pockets as the key factor for achieving this. Sr 2 BiAu, which features ten energy-aligned low-effective-mass pockets (six along Γ-X and four at L), is predicted to deliver n-type zT=0.4-4.9 at T=100-700 K. Comparison with the previously investigated compound Ba 2 BiAu shows that the additional L pockets in Sr 2 BiAu significantly increase its low-temperature power factor to a maximum value of 12 mW m -1 K -2 near T=300 K. However, at high temperatures the power factor of Sr 2 BiAu drops below that of Ba 2 BiAu because the L states are heavier and subject to strong scattering by phonon deformation, as opposed to the lighter Γ-X states, which are limited by polar-optical scattering. Sr2SbAu is predicted to deliver a lower n-type zT=3.4 at T=750 K due to appreciable misalignment between the L and Γ-X carrier pockets, generally heavier scattering, and a slightly higher lattice thermal conductivity. Soft acoustic modes, which are responsible for the low lattice thermal conductivity, also increase the vibrational entropy and high-temperature stability of these Heusler compounds, suggesting that their experimental synthesis may be feasible. The dominant intrinsic defects are found to be Au vacancies, which drive the Fermi level towards the conduction band and work in favor of n-doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Highly Active Hydrogen Evolution Reaction (HER) Catalysts Formed by Energetic Pt n Cluster Deposition: Deposition Dynamics and the HER Mechanism

Mass-selected Pt n + (n ≤ 7) were deposited at variable energies on highly oriented pyrolytic graphite (HOPG), creating highly active hydrogen evolution reaction (HER) electrocatalysts. HER mass activities were ~2 to >10 times higher than those for the surface atoms in bulk Pt and for Pt n deposited on several other supports. Thus, high activity reflects the Pt-C structures formed by energetic Pt n -HOPG impacts, in addition to high Pt surface availability. The Pt n /HOPG electrodes were probed by X-ray photoelectron spectroscopy, low energy ion scattering, and electron microscopy. Born-Oppenheimer molecular dynamics (BOMD) was used to simulate Pt n - HOPG impacts, revealing the types of structures formed at different energies, then DFT was used to probe their most important HER pathways. For low deposition energies, the Pt n deposit onto the HOPG surface with sub-unit sticking probability, aggregating at defects. With increasing deposition energy, the sticking probability initially decreases, then rises to unity as subplantation and defect creation allow formation of strongly bonded platinum-carbon structures. Barriers for HER on these structures were found to be low and weakly dependent on Pt n size, consistent with experiment. The activities were highest for small covalently-bonded Pt-C structures created at high deposition energies. The larger aggregated structures formed at low energies were less active, but still substantially better than the bulk Pt surface monolayer. The catalysts were stable in repeated potential cycling at reducing potentials, but electrodes containing subplanted Pt became more active when scanned to oxidizing potentials, due to emergence of subplanted Pt onto the surface.

08 HYDROGEN↗
DOE OSTI2020

Silver Adsorption on Calcium Niobate(001) Nanosheets: Calorimetric Energies That Explain Sinter-Resistant Support

Metal nanoparticles deposited on oxide supports are essential to many technologies, including catalysts, fuel cells and electronics. Therefore, understanding the chemical bonding strength between metal nanoparticles and oxide surfaces is of great interest. The adsorption energetics, adhesion energy and adsorbate structure of Ag on dehydrated HCa 2 Nb 3 O 10 (001) nanosheets at 300 K have been studied using metal adsorption calorimetry and surface spectroscopies. These dehydrated (“dh”) calcium niobate nanosheets “(dh-HCa 2 Nb 3 O 10 (001))” have stoichiometry Ca 4 Nb 6 O 19 . They impart unusual stability to metal nanoparticles when used as catalyst supports and are easy-to-prepare by Langmuir-Blodgett (LB) techniques, highly ordered, and essentially single-crystal surfaces of mixed oxides with a huge ratio of terrace to edge sites. Below monolayer coverage, Ag grows on dh-HCa 2 Nb 3 O 10 (001) as 2D islands of thickness ~2 layers. The differential heat of Ag adsorption is initially ~303 kJ/mol, increasing slowly to ~338 kJ/mol by 0.8 ML. At higher coverages, Ag atoms mainly add on top of these 2D islands, growing 3D nanoparticles of increasing thickness, as the heat decreases asymptotically towards silver’s heat of sublimation (285 kJ/mol). The adhesion energy of Ag(s) to this Ca niobate surface is estimated to be 4.33 J/m 2 , larger than on any oxide surface previously measured. This explains the sinter resistance reported for metal nanoparticles on this support. Electron transfer from Ag into the calcium niobate is also measured. Furthermore, these results demonstrate an easy way to do singlecrystal-type surface science studies - and especially thermochemical measurements - on the complex surfaces of mixed oxides: using LB-deposited perovskite nanosheets and ultrahigh vacuum annealing in O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Geometric frustration of Jahn–Teller order in the infinite-layer lattice

The Jahn–Teller effect, in which electronic configurations with energetically degenerate orbitals induce lattice distortions to lift this degeneracy, has a key role in many symmetry-lowering crystal deformations. Lattices of Jahn–Teller ions can induce a cooperative distortion, as exemplified by LaMnO 3 . Although many examples occur in octahedrally or tetrahedrally coordinated transition metal oxides due to their high orbital degeneracy, this effect has yet to be manifested for square-planar anion coordination, as found in infinite-layer copper, nickel, iron and manganese oxides. Here, for this work, we synthesize single-crystal CaCoO 2 thin films by topotactic reduction of the brownmillerite CaCoO 2.5 phase. We observe a markedly distorted infinite-layer structure, with ångström-scale displacements of the cations from their high-symmetry positions. This can be understood to originate from the Jahn–Teller degeneracy of the d xz and d yz orbitals in the d 7 electronic configuration along with substantial ligand–transition metal mixing. A complex pattern of distortions arises in a $2\sqrt2$ x $2\sqrt2$ x $1$ tetragonal supercell, reflecting the competition between an ordered Jahn–Teller effect on the CoO 2 sublattice and the geometric frustration of the associated displacements of the Ca sublattice, which are strongly coupled in the absence of apical oxygen. As a result of this competition, the CaCoO 2 structure forms an extended two-in–two-out type of Co distortion following ‘ice rules’.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Characterization of self-magnetic pinch (SMP) radiographic diode performance on RITS-6 at Sandia National Laboratories. I. Diode dynamics, DC heating to extend radiation pulse

Radiographic diodes focus on an intense electron beam to a small spot size to minimize the source area of energetic photons for radiographic interrogation. The self-magnetic pinch (SMP) diode has been developed as such a source and operated as a load for the six-cavity radiographic integrated test stand (RITS-6) inductive voltage adder driver. While experiments support the generally accepted conclusion that a 1:1 aspect diode (cathode diameter equals anode–cathode gap) delivers optimum SMP performance, such experiments also show that reducing the cathode diameter, while reducing spot size, also results in reduced radiation dose, by as much as 50%, and degraded shot reproducibility. Analysis of the effective electron impingement angle on the anode converter with time made possible by a newly developed dose-rate array diagnostic indicates that fast-developing oscillations of the angle are correlated with early termination of the radiation pulse on many of the smaller-diameter SMP shots. This behavior as a function of relative cathode size persists through experiments with output voltages and currents up to 11.5 MV and 225 kA, respectively, and with spot sizes below approximately few millimeters. Since simulations to date have not predicted such oscillatory behavior, considerable discussion of the angle behavior of SMP shots is made to lend credence to the inference. We report there is clear anecdotal evidence that DC heating of the SMP diode region leads to stabilization of this oscillatory behavior. This is the first of two papers on the performance of the SMP diode on the RITS-6 accelerator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Trace explosives sampling for security applications (TESSA) study: Evaluation of procedures and methodology for contact sampling efficiency

We report the detection of trace amounts of explosive materials is critical to the security at mass transit centers (e.g., airports and railway stations). In a typical screening process, a trap is used to probe a surface of interest to collect and transfer particulate residue to a detector for analysis. The collection of residues from the surface being probed is widely viewed as the limiting step in this process. A multi-institutional study was performed to establish a methodology for the evaluation of sampling media collection efficiencies. Dry deposited residues of 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), C-4 (an RDX-based explosive), and pentaerythritol tetranitrate (PETN) were harvested from acrylonitrile butadiene styrene (ABS) plastic, ballistic nylon (NYL), and uncoated aluminum surfaces using muslin, Texwipe cotton, and stainless-steel mesh traps. Transfer and collection efficiencies of the sample media were calculated based on liquid chromatography-mass spectrometry analysis. Dry transfer efficiencies (DTE%) to all tested surfaces were greater than 75%, with transfer to ABS plastic being the lowest. Collection efficiency (CE%) varied significantly across the traps and the surfaces, yet some conclusions can be drawn; nylon had the lowest CE% for all cases (~10%), and the stainless steel mesh had the lowest CE% for the evaluated traps (~20%). Though the testing parameters have been standardized among the participants to establish a framework for an independent comparison of contact sampling media and surfaces, substantial variations in the DTE% and the CE% were observed, suggesting that other variables can affect contact sampling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Antiferromagnetic Fe Te 2 1 T - phase formation at the Sb 2 Te 3 / Ni 80 Fe 20 interface

Bilayer topological insulator/ferromagnet (TI/FM) heterostructures are promising for spintronic applications due to their low switching energy and therefore power efficiency. Until recently, the reactivity of TI with FM films was overlooked in the spin orbit-torque literature, even though there are reports that it is energetically favorable for TIs to react with transition metals and form interfacial layers. Here, in this study we fabricated a TI/FM heterostructure comprised of molecular beam epitaxy grown Sb 2 Te 3 and DC sputtered Ni 80 Fe 20 . Broadband ferromagnetic resonance revealed spin-pumping evident by the significant enhancement in Gilbert damping, which is likely a signature of the topological surface states or the presence of large spin-orbit-coupling in the adjacent Sb 2 Te 3 . With low-temperature magnetometry, an exchange bias is observed which indicates an exchange interaction between an antiferromagnet (AFM) and an adjacent FM. Cross-section high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) characterization of the Sb 2 Te 3 - Ni 80 Fe 20 bilayer revealed a complex interface showing diffusion of Fe and Ni into the Sb 2 Te 3 film yielding the formation of a FeTe 2 1T-type structural phase. Furthermore, density functional theory calculations revealed that the FeTe 2 1T-phase has an AFM ground state. Due to experimental limitations in the electron energy loss spectroscopy measurements precise chemistry of the interfacial phase could not be determined, therefore it is possible that the FeTe 2 1T and/or an intermixed (Fe 1-x Ni x )Te 2 1T is the AFM interfacial phase contributing to exchange bias in the system. This work emphasizes the chemical complexity of TI/FM interfaces that host novel, metastable magnetic topological phases and require more in-depth studies of other similar interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

In Situ Electrochemistry of Buried Interfaces in Metal Halide Perovskites: Probing Energy Bands, Halide Redox Activity, and Kinetics

Control over charge injection and extraction processes across buried interfaces is fundamental for all (opto)electronic multilayer device platforms, necessitating detailed understanding of local structural and chemical differences that promote defect formation, distort energetic band-edge alignments, and alter charge transport processes. Herein, the implementation of a low-cost electroanalytical methodologies’ tool suite is described to quantitatively characterize buried interfaces and redox reactions in printable, mixed electrical–ionic, and redox-active metal halide perovskites and a prototypical hole-transporting nickel oxide (NiO x ) thin film. The objective is to demonstrate the power of electrochemical methodologies to improve the nanoscale understanding of complex interfaces within optoelectronic devices by providing case studies on how to: i) differentiate between electronic and chemical properties in NiO x contacts; ii) measure changes in reversibility of halide redox reactions via NiO x surface states; iii) assess energy alignment and charge transport across (modified) buried interfaces; and iv) quantify defects at buried interfaces that change with modifiers and differences in perovskite processing, including increasing defect concentrations when films are slot-die-coated versus spin-cast. The collective approach addresses major challenges in understanding the precise energy landscape and interface reactivity under relevant electric fields that mimic operando conditions (away from equilibrium) and across length scales in thin film device formats.

(spectro)electrochemistry↗
DOE OSTI2025

Lithium's low-temperature phase transitions: Insights into quantum lattice dynamics and superconductivity

The large lattice dynamics of lithium, driven by its low atomic mass, results in energetically similar structures and significant isotope effects under pressure, posing challenges to current theoretical models. Above 20 GPa and at low temperatures, lithium's electronic properties deviate from simple metallic behavior, with superconductivity emerging in a complex, pressure-dependent manner, alongside an unusual isotope effect. The structural phases of 7 Li reported under these conditions are inconsistent across studies, and the structures of 6 Li remain unexamined. These gaps limit our understanding of the effects of pressure on lithium's electronic properties and the role of quantum lattice effects on its structural behavior under pressure. Here, we integrate experimental and theoretical approaches to investigate the low-temperature structural phase boundaries in lithium isotopes. We map the structural phase diagram of 7 Li from 5 to 55 GPa and 15–75 K, identifying the sequence fcc → ℎ⁡R⁢1 → cI16. A pronounced isotope effect is observed, with 6 Li shifting the fcc → ℎ⁡R⁢1 phase boundary to lower pressures at 15 K. Density functional theory calculations further clarify how these structural changes affect superconducting properties, particularly emphasizing the role of the fcc → ℎ⁡R⁢1 transition in lithium's superconductivity. Furthermore, our findings offer insights into the unique behavior of lithium isotopes under pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Energetic and Electronic Properties of UX +/0/– for X = Li and Be and Comparison of the Properties of the Uranium Atom Binding to 2nd Row Elements Li–F

The bonding and spectroscopic properties of ULi +/0/– and UBe +/0/– to complete the series for UX +/0/– for X = Li to F were investigated by high-level ab initio SO-CASPT2 and CCSD(T) electronic structure calculations. The low-lying spin–orbit states were obtained at the SA-CASPT2/aQ-PP level; bond dissociation energies (BDEs), ionization energies (IEs), adiabatic electronic affinities (AEAs), and vertical detachment energies (VDEs) were calculated at the Feller-Peterson-Dixon (FPD) level. A dense manifold of low-lying states was predicted for ULi +/0/– and UBe +/0/– . Here, the calculated BDEs for ULi (37.7 kJ/mol) and UBe (8.0 kJ/mol) show that UBe is weakly bound. For redox processes, the BDEs increased for ULi + (109.3 kJ/mol), ULi – (47.4 kJ/mol), UBe + (35.6 kJ/mol), and UBe – (72.3 kJ/mol). The IE(ULi) = 4.650 eV is lower than IE(Li); the IE(UBe) = 5.901 eV is close to the IE(U) and to the IEs of UB, UC, UN, UO, and UF. The AEAs of ULi (0.708 eV) and UBe (0.989 eV) are lower than those for UB, UC, UN, and UO but higher than that for EA(UF). Natural bond orbital (NBO) calculations show that ULi has the 5f 3 6d 1 7s 2 configuration for U and 2s 1 for Li, with a small partial negative charge slightly delocalized on U. UBe arises from the U(5f 3 6d 1 7s 2 ) and Be(2s 2 ) electron configurations with no charge separation. The same calculations were made for WX (X = Li, Be, C–F) to enable detailed comparisons of the properties for UX with WX (X = Li–F). For WX, BDE(WX) is higher than that for UX for X = Li to N and lower than BDE(UX) for X = O and F, mostly due to the higher IE of W than U as ionic character becomes more important going from Li to F.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser ablation up to pressures above ∼135 GPa. We hence deduce the x-ray Debye–Waller factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density endstation of the European X-ray Free-Electron Laser. Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering) and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer provides a reliable measurement of $T/Θ^2_D$, where Θ D is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper and find good agreement within experimental errors. We, thus, demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Emerging Potassium Metal Anodes: Perspectives on Control of the Electrochemical Interfaces

Potassium metal acts as the anode in emerging potassium metal batteries (KMBs). It further serves as the counter-electrode for potassium ion battery (KIB) half-cells, with its reliable performance being critical for assessing the working electrode material. This first-of-its-kind critical review focuses on the dual challenge of controlling the potassium metal-substrate and the potassium metal-electrolyte interface so as to prevent dendrites. The discussion begins with a comparison of the physical and chemical properties of K metal anodes versus the much oft studied Li and Na metal anodes. Based on established descriptions for root causes of dendrites, the problem should be less severe for K than for Li or Na, while in fact the opposite is observed. The key reason that the K metal surface rapidly becomes dendritic in common electrolytes is its unstable solid electrolyte interphase (SEI). An unstable SEI layer is defined as being non self-passivating. No SEI is perfectly stable during cycling, and all SEI structures are heterogenous both vertically and horizontally relative to the electrolyte interface. The difference between a "stable" and an "unstable" SEI may be viewed as the relative degree to which during cycling it thickens and becomes further heterogeneous. The unstable SEI on K metal leads to a number of interrelated problems, such as low cycling Coulombic efficiency (CE), a severe impedance rise, large overpotentials, and possibly electrical shorting; all of which have been reported to occur as early as in the first ten plating/stripping cycles. Many of the traditional "interface fixes" employed for Li and Na metal anodes, such as various artificial SEIs, surface membranes, barrier layers, the secondary separators, etc. have not been attempted or optimized for the case of K. This is an important area for further exploration, with an understanding that success may come harder than with Li due to K-based SEI reactivity with both ether and ester solvents. The second critical problem with K metal anodes is that they do not thermally or electrochemically wet a standard (untreated) Cu foil current collector. Published experimental and modeling research directly highlights the weak bonding between the K atoms and a Cu surface. Existing surface treatment approaches that achieve improved K wetting are discussed, along with the general design rules for future studies. Also discussed are geometry-based methods to tune nucleation, as well dual approaches where nucleation and SEI structure are tuned through complementary schemes to achieve extended half-cell and full battery stability. We hypothesize that K metal never achieves a planar wetting morphology even at cycle one making the dendrites "baked-in". We propose that classical thin films growth models, Frank van der Merwe (F-M), Volmer Weber (V-W), and Stranski-Krastanov (S-K) can be employed to describe early stage plating behavior. It is demonstrated that island-like V-W growth is the applicable description for the natural plating behavior of K on pristine Cu. Moving forward, there are three inter-related thrusts to be pursued: First, K salt - based electrolyte formulations have to mature and become further tailored to handle the increased reactivity of a metal rather than an ion anode. Second, the K-based SEI structure needs to be further understood and ultimately tuned to be less reactive. Third, the energetics of the K metal - current collector interface must be controlled to promote planar wetting/dewetting throughout cycling.

25 ENERGY STORAGE↗
DOE OSTI2026

Enrichment by the first stars in a relic dwarf galaxy

Stars that contain trace amounts of elements heavier than helium (that is, ‘metallicity’) preserve the chemical fingerprints of the first stars. In the Milky Way, nearly all of the lowest-metallicity stars show an extreme over-abundance of carbon. The origin of this signature has remained a mystery owing to the lack of observational constraints on the environments in which it originates. Here, in this work, we present observations of a star in the >10-billion-year-old ultrafaint dwarf galaxy Pictor II, showing the lowest iron and calcium abundances outside the Milky Way (<1/43,000th solar and ~1/160,000th solar), with >3,000× relative carbon enhancement. The star’s exceptional paucity in iron and calcium make it clearly preserve enrichment from the first stars in a relic dwarf galaxy; Pictor II is one of the smallest, most chemically primordial systems known. This star supports the hypothesis that extreme carbon enhancement results from low-energy supernovae from the first stars, as the yields of energetic supernovae are harder to retain in small-scale environments. This signature of enrichment by the first stars may trace a regime inaccessible to current high-redshift observations, which can hardly detect the initial enrichment of the smallest galaxies.

chemical evolution↗
DOE OSTI2026

Modulating Mid-Gap Electronic States Through Site-Selective Modification in B-Pbx/B'-CuyV2O5/CdS Heterostructures for Photocatalytic Hydrogen Evolution

We interfaced ..beta..-Pbx/..beta..'-CuyV2O5 compounds, with varying stoichiometries of precisely positioned Pb-ions (x) and Cu-ions (y) in interstitial sites along a tunnel-structured ?-V2O5 framework, with cysteine-capped CdS (cysCdS) quantum dots (QDs) to yield heterostructured photocatalysts. ..beta..-Pbx/..beta..'-CuyV2O5 compounds exhibit midgap electronic states with orbital contributions from both Cu 3d and stereochemically active Pb 6s states that show distinctive light-initiated reactivity with photoexcited QDs. ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures were prepared by linker-assisted assembly (LAA). Scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Raman spectroscopy revealed that cysCdS QDs were deposited onto surfaces of ..beta..-Pbx/..beta..'-CuyV2O5 via LAA. HAXPES revealed that the site-selective positioning of Pb-ions and Cu-ions promoted close energetic alignment of the midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds with the valence-band maximum of cysCdS QDs. Transient absorption spectroscopy revealed that photogenerated holes were transferred from CdS QDs to midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds on time scales <50 ps. Finally, photoelectrochemical and photochemical experiments revealed that ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the photocatalytic reduction of H+ to H2. In photoelectrochemical experiments, under oxidative conditions, for all ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at a Pt counter electrode while a sacrificial donor was oxidized at the heterostructure-functionalized working electrode. In contrast, under reductive conditions, for ..beta..-Pb0.152V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at the working electrode. In photochemical experiments, dispersed ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the reduction of H+ to H2 under white-light illumination; ..beta..'-Cu0.55V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, for which midgap states have Cu 3d orbital character, generated 2-fold more H2 than ..beta..-Pb0.152V2O5/CdS heterostructures. Cu-ion insertion thus appends additional acceptor surface states that improve ligand-mediated hole transfer from photoexcited QDs, but such states are intrinsically limited in mediating hole transport to the substrate as a result of the low mobility of holes in narrow Cu 3d-states. Our results reveal that the density and orbital character of midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds, tunable through recently developed site-selective ion insertion strategies, determine efficiencies of charge-transfer and charge-transport mechanisms that underpin photocatalysis.

36 MATERIALS SCIENCE↗