Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Selective sorption of oxygen and nitrous oxide by an electron donor-incorporated flexible coordination network

Incorporating strong electron donor functionality into flexible coordination networks is intriguing for sorption applications due to a built-in mechanism for electron-withdrawing guests. Here we report a 2D flexible porous coordination network, [Ni 2 (4,4'-bipyridine)(VTTF) 2 ]n(1) (where H 2 VTTF = 2,2;-[1,2-bis(4-benzoic acid)-1,2ethanediylidene]bis-1,3-benzodithiole), which exhibits large structural deformation from the as-synthesized or open phase (1α) into the closed phase (1β) after guest removal, as demonstrated by X-ray and electron diffraction. Interestingly, upon exposure to electron-withdrawing species, 1β reversibly undergoes guest accommodation transitions; 1α$\supset$O 2 (90 K) and 1α$\supset$N 2 O (185 K). Moreover, the 1β phase showed exclusive O 2 sorption over other gases (N 2 , Ar, and CO) at 120 K. The phase transformations between the 1α and 1β phases under these gases were carefully investigated by in-situ X-ray diffraction, in-situ spectroscopic studies, and DFT calculations, validating that the unusual sorption was attributed to the combination of flexible frameworks and VTTF (electron-donor) that induces strong interactions with electron-withdrawing species.

36 MATERIALS SCIENCE↗

Characterization of ZnS thin films synthesized through a non-toxic precursors chemical bath

Highlights: • High quality ZnS thin films have been deposited by chemical bath deposition technique from a non-toxic precursor’s solution. • Nanocrystalline ZnS thin films with large band gap energy were synthesized without using ammonia. • Evidence that the growing of the thin films is carried out by means of hydroxide mechanism was found. • The properties of these ZnS thin films are similar and in some cases better than the corresponding ones produced using toxic precursors such as ammonia. - Abstract: In solar cells, ZnS window layer deposited by chemical bath technique can reach the highest conversion efficiency; however, precursors used in the process normally are materials highly volatile, toxic and harmful to the environment and health (typically ammonia and hydrazine). In this work the characterization of ZnS thin films deposited by chemical bath in a non-toxic alkaline solution is reported. The effect of deposition technique (growth in several times) on the properties of the ZnS thin film was studied. The films exhibited a high percentage of optical transmission (greater than 80%); as the deposition time increased a decreasing in the band gap values from 3.83 eV to 3.71 eV was observed. From chemical analysis, the presence of ZnS and Zn(OH){sub 2} was identified and X-ray diffraction patterns exhibited a clear peak corresponding to ZnS hexagonal phase (1 0 3) plane, which was confirmed by electron diffraction patterns. From morphological studies, compact samples with well-defined particles, low roughness, homogeneous and pinhole-free in the surface were observed. From obtained results, it is evident that deposits of ZnS–CBD using a non-toxic solution are suitable as window layer for TFSC.

36 MATERIALS SCIENCE↗

Structure study of Bi{sub 4}Ti{sub 3}O{sub 12} produced via mechanochemically assisted synthesis

Nanosized bismuth titanate was prepared via high-energy ball milling process through mechanically assisted synthesis directly from their oxide mixture of Bi{sub 2}O{sub 3} and TiO{sub 2}. Only Bi{sub 4}Ti{sub 3}O{sub 12} phase was formed after 3 h of milling time. The excess of 3 wt% Bi{sub 2}O{sub 3} added in the initial mixture before milling does not improve significantly the formation of Bi{sub 4}Ti{sub 3}O{sub 12} phase comparing to stoichiometric mixture. The formed phase was amorphized independently of the milling time. The Rietveld analysis was adopted to determine the crystal structure symmetry, amount of amorphous phase, crystallite size and microstrains. With increasing the milling time from 3 to 12 h, the particle size of formed Bi{sub 4}Ti{sub 3}O{sub 12} did not reduced significantly. That was confirmed by SEM and TEM analysis. The particle size was less than 20 nm and show strong tendency to agglomeration. The electron diffraction pattern indicates that Bi{sub 4}Ti{sub 3}O{sub 12} crystalline powder is embedded in an amorphous phase of bismuth titanate. Phase composition and atom ratio in BIT ceramics were determined by X-ray diffraction and EDS analysis.

36 MATERIALS SCIENCE↗

Synthesis of PbS/poly (vinyl-pyrrolidone) nanocomposite

A simple solution growth method for synthesis of nanocomposite of PbS nanoparticles in poly(vinyl-pyrrolidone) (PVP) polymer is described. The nanocomposite is prepared from methanolic solution of lead acetate (PbAc), thiourea (TU) and PVP at room temperature ({approx}27 deg. C). Optical absorption spectrum of PbS/PVP nanocomposite solution shows strong absorption from 300 to 650 nm with significant bands at 400 and 590 nm which is characteristic of nanoscale PbS. Spin-coated nanocomposite films on glass have an absorption edge at {approx}650 nm with band gap of 2.55 eV. Fourier transform infrared (FTIR) spectroscopy of PbS/PVP nanocomposite and PVP shows strong chemical bond between PbS nanoparticles and host PVP polymer. The transmission electron microscope (TEM) images reveal that 5-10 nm PbS particles are evenly embedded in PVP polymer. The formation of PbS is confirmed by selective area electron diffraction (SAED) of a typical nanoparticle.

36 MATERIALS SCIENCE↗

Structural phase transitions in the relaxor ferroelectric Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18}

The relaxor ferroelectric Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18} has been studied by Rietveld refinement of powder neutron diffraction data collected at temperatures of 100, 250 and 400 deg. C. Our refinements are compatible with the 'average' crystal structure of Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18} undergoing the phase transition sequence F2mm->I4mm->I4/mmm as a function of increasing temperature, with the latter phase being observed above the known ferroelectric Curie temperature, T{sub m}, and the intermediate phase consistent with a previously observed dielectric anomaly around 207 deg. C. The results are, however, in conflict with both observation of a symmetry lowering (to space group B2eb) in the lowest temperature phase, observed by electron diffraction, and also with electrical property measurements, which suggest both a- and c-axis polarisation up to T{sub m}. Nevertheless, these crystallographic results are consistent with the observation of relaxor behaviour in this material, and underline the importance of considering 'long-range' versus 'local' structural effects in relaxor materials. - Abstract: A powder neutron diffraction study suggests that the relaxor ferroelectric Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18} undergoes the phase transition sequence F2mm-I4mm-I4/mmm with increasing temperature. Display Omitted

36 MATERIALS SCIENCE↗

Visible photoluminescence and room temperature ferromagnetism in high In-content InGaN:Yb nanorods grown by molecular beam epitaxy

We report the growth of high indium content InGaN:Yb nanorods grown on c-plane sapphire (0001) substrates using plasma assisted molecular beam epitaxy. The in situ reflection high energy electron diffraction patterns recorded during and after the growth revealed crystalline nature of the nanorods. The nanorods were examined using electron microscopy and atomic force microscopy. The photoluminescence studies of the nanorods showed the visible emissions. The In composition was calculated from x-ray diffraction, x-ray photoelectron spectroscopy, and the photoluminescence spectroscopy. The In-concentration was obtained from photoluminescence using modified Vegard's law and found to be around 37% for InGaN and 38% for Yb (5 ± 1%)-doped InGaN with a bowing parameter b = 1.01 eV. The Yb-doped InGaN showed significant enhancement in photoluminescence properties compared to the undoped InGaN. The Yb-doped InGaN nanorods demonstrated the shifting of the photoluminescence band at room temperature, reducing luminescence amplitude temperature dependent fluctuation, and significant narrowing of excitonic emission band as compared to the undoped InGaN. The magnetic properties measured by superconducting quantum interference devices reveals room temperature ferromagnetism, which can be explained by the double exchange mechanism and magnetostriction.

36 MATERIALS SCIENCE↗

Growth of epitaxial iron nitride ultrathin film on zinc-blende gallium nitride

The authors report the growth of iron nitride on zinc-blende gallium nitride using molecular beam epitaxy. First, zinc-blende GaN is grown on a magnesium oxide substrate having (001) orientation; second, an ultrathin layer of FeN is grown on top of the GaN layer. In situ reflection high-energy electron diffraction is used to monitor the surface during growth, and a well-defined epitaxial relationship is observed. Cross-sectional transmission electron microscopy is used to reveal the epitaxial continuity at the gallium nitride-iron nitride interface. Surface morphology of the iron nitride, similar to yet different from that of the GaN substrate, can be described as plateau valley. The FeN chemical stoichiometry is probed using both bulk and surface sensitive methods, and the magnetic properties of the sample are revealed.

36 MATERIALS SCIENCE↗

Structural, morphological, optical and magnetic properties of Ag3(2+x)InxNb4-xO11+δ (0.25 ≤ x ≤ 1.0) nanoparticles synthesized by sol–gel method

Highlights: • Novel Ag{sub 3 (2+x)} In{sub x}Nb{sub 4-x}O{sub 11+δ} nanoparticles were synthesized by sol-gel method and studied their optical magnetic properties. • XRD studies confirm the single-phase monoclinic lattice structure with P2/m space group. • Morphology, purity and homogeneity of samples were confirmed by SEM images, EDX and X-ray mapping. • The absorption spectra and tauc plots confirms the semiconductor nature of the samples. • Magnetic studies reveals the ferromagnetic behavior of the samples at room temperature. - Abstract: Herein, we report the structure, morphology, optical and magnetic properties of novel Ag{sub 3 (2+x)} In{sub x}Nb{sub 4-x}O{sub 11+δ} (0.25 ≤ × ≤ 1.0; A1–A4) nanoparticles prepared by sol-gel technique. The samples were studied using X-ray diffraction, electron microscopy, diffuse reflectance spectroscopy, vibrating sample magnetometer, and electron spin resonance. X-ray diffraction studies confirm the formation of monoclinic lattice type with P2/m space group. Purity and homogeneity of the samples were confirmed by X-ray mapping. The semiconductor nature of the samples was identified by optical absorption spectra which indicate an inter-band transition from the oxygen 2p to niobium 4d electronic states. The magnetization plots reveal the room temperature ferromagnetic behavior of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Augmented photocatalytic activity and luminescence response of Tb³⁺ doped nanoscale titania systems

The present work reports on the effect of Tb³⁺ doping on the luminescence and photocatalytic performance of nano-structured titania derived through a sol-gel route. X-ray diffraction patterns have revealed the existence of anatase phase with and without Tb³⁺ doping and with an improved orientation factor along (004) and (200) planes. Transmission electron microscopy and selective area electron diffraction studies, while exhibiting ample poly-crystallinity feature, have predicted an average particle size of ~9 nm and ~6 nm for the un-doped and 5% Tb³⁺ doped nano-titania samples; respectively. Apart from emissions accompanied by different types of defects, Tb³⁺ related transitions, such as, ⁵D₃ → ⁷F₅, ⁵D₃ → ⁷F₄, and ⁵D₄ → ⁷F₆ were identified in the photoluminescence spectra. Brunauer-Emmett-Teller surface area analysis, as carried out on a Tb³⁺ doped nano-titania system, has demonstrated a more-open hysteretic loop owing to significant difference of N₂ adsorption/desorption rates. The photocatalytic activity of nano-titania, as evaluated from the nature of degradation of methyl orange under UV illumination, exhibited the highest efficiency for a Tb³⁺ doping level of 2.5%. The augmented photocatalytic degradation has also been discussed in the light of a model based on pseudo first-order kinetics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparative SEM and TEM analyses of apatite phases prepared by a multi-sample loading device

Highlights: • A multi-sample loading device which ultrasonically disperses samples was developed. • Comparative EM analyses on various apatite phases were efficiently carried out. • SEM-EDS data revealed distinctive values of O/P and Ca/P intensity ratios. • TEM-SAED data presented characteristic structural features of apatite phases. • Lattice parameters of bone and fossil apatite were affected by CO{sub 3} content. - Abstract: Comparative chemical and structural characterization of various apatite phases from both synthetic and natural sources were carried out by utilizing a multi-sample loading device developed for scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. The device is capable of spraying nanoparticles via ultrasonication, and four separate samples were loaded on a single TEM grid by a masking tool to characterize different apatite phases in consistent instrumental and analytical conditions. SEM energy dispersive spectroscopy (EDS) analysis of the apatite samples revealed distinctive values of O/P and Ca/P intensity ratios except for the fossil apatite due to its high proportion of externally originating phases. Selected area electron diffraction (SAED) pattern analysis presented the characteristic lattice parameters of the apatite phases, especially the bone and fossil apatite which had CO{sub 3}in their chemistry. Analyzing distinctive chemical and structural features among varied apatite phases can be efficiently carried out through electron microscopy with multiple samples on a single TEM grid, and such methods can be employed for characterizing a wider range of materials.

36 MATERIALS SCIENCE↗

Fe/Si(001) Ferromagnetic Layers: Reactivity, Local Atomic Structure and Magnetism

Ultrathin ferromagnetic Fe layers on Si(001) have recently been synthesized using the molecular beam epitaxy (MBE) technique, and their structural and magnetic properties, as well as their interface reactivity have been investigated. The study was undertaken as function of the amount of Fe deposited and of substrate temperature. The interface reactivity was characterized by Auger electron spectroscopy (AES). The surface structure was characterized by low-energy electron diffraction (LEED). The magnetism was investigated by magneto-optical Kerr effect (MOKE). A higher deposition temperature stabilizes a better surface ordering, but it also enhances Fe and Si interdiffusion and it therefore decreases the magnetism. Despite the rapid disappearance of the long range order with Fe deposition at room temperature, the material exhibits a significant uniaxial in-plane magnetic anisotropy. For the Fe deposition performed at high temperature (500 deg. C), a weak ferromagnetism is still observed, with saturation magnetization of about 10% of the value obtained previously. MOKE studies allowed inferring the main properties of the distinct formed layers.

36 MATERIALS SCIENCE↗

Tailoring a 3D Covalent Organic Framework Toward Facile Functionalization

Three-dimensional covalent organic frameworks (3D COFs) are notably crystalline and stable, but their architectures and monomer structures make them difficult to functionalize. Here, a new strategy is presented to render COF-300 and other imine-linked frameworks amenable to facile functionalization in the last step of synthesis. By reducing the imine linkages to secondary amines and appending them with acetyl halide groups, the linkages are converted to electrophiles that can be readily reacted with nucleophilic guests. This route yields eight new COF-300 derivatives, bearing chloroacetyl, bromoacetyl, azide, cyano, amino, hydroxyl, methoxy, or thiomethyl groups appended to the inter-monomer linkages. The new materials are characterized through solid-state NMR, infrared spectroscopy, and powder X-ray diffraction, among other techniques, finding that the reported linkage transformations proceed to complete conversion while retaining the crystallinity of the materials. Microcrystal electron diffraction (microED) data are used to solve the evacuated structure of the amine-linked framework COF-300-AR for the first time, providing conclusive evidence of this framework's guest-induced phase change, along with the structure of the new framework COF-300-NH 2 . Finally, COF-300-NH 2 is shown to have significantly improved adsorption capacity for CO 2 and perfluoroalkyl substances (PFAS), highlighting the benefits of this synthetic strategy for the generation of customized adsorbents.

COF-300↗

Microscopic evolution of dielectric nanoparticles at different calcination temperatures synthesized via sol-gel auto-combustion

Dielectric nano powder synthesis is carried by a simple and fast sol-gel auto-combustion method. The transformation of crystalline phases of as-synthesized nano powders is investigated through the detailed transmission electron microscopy (TEM), revealed the crystallographic alterations and morphological information even at lattice scale. From specific area electron diffraction (SAED) pattern, has specified the d-spacing and corresponding planes supported by the observed lattice fringes. The morphological characterization of nanoparticles is performed through field-emission scanning electron microscopy (FESEM), exhibiting the increment in particle size due to agglomeration with the increase in annealing temperature. Furthermore, EDX pattern has been used to verify the formation of nanoparticles by revealing the presence of required elements.

36 MATERIALS SCIENCE↗

The evolution of orientation relationships during the transformation of a twin-free T-particle to tenfold T-twins in an Al alloy during homogenisation

Highlights: • The ORs of T-phase change continuously during its transformation to tenfold twins. • The changes in ORs are achieved by lattice rotations of T-phase about [010]{sub T} axis. • The OR change of T-phase exhibits a relationship with its cross-section shape. • The OR change of T-phase reduce the interface misfit increased by newly-formed twins. • Rotation of T-particle requires coordinate deformation at the near-interface region. - Abstract: The crystallographic and morphological analysis of T-phase formation in Al alloys was investigated using high-resolution electron microscopy (HRTEM) and selected-area electron diffraction pattern (SAEDP). The results show that the orientation relationships (ORs) of the T-phase change continuously from its original ORs during the transformation of a twin-free T-particle to the tenfold T-twins. These OR changes were achieved by lattice rotations of T-twin domains (T-TDs) about the [010]{sub T}//[010]{sub Al} axis by an angle ranging from 0° to 9°, and this exhibits a relationship with the shape of the cross-sections of the T-phase (T-CSs). The changes in ORs of the T-phase can reduce the increase in interface misfit between the newly-formed T-TDs and the Al matrix. The matrix could only accommodate the rotation of a T-particle at the near-interface region at relatively high temperatures.

36 MATERIALS SCIENCE↗

Preparation and atomic structure of reconstructed (0001) InGaN surfaces

The preparation and surface structure of high quality group-III-polar (0001) InGaN layers grown by metal-organic vapor phase epitaxy have been investigated. In order to obtain a clean and well-ordered surface we studied the preparation by annealing at various temperatures under ultra high vacuum and nitrogen-rich conditions in nitrogen-plasma. We show that different InGaN surface reconstructions such as (1 Multiplication-Sign 1), (1 + 1/6), (2 Multiplication-Sign 2), and ({radical}(3) Multiplication-Sign {radical}(3))R30 Degree-Sign can be obtained as observed by low energy electron diffraction. Dependent on the annealing temperature and nitrogen supply these surfaces exhibit significant differences in stoichiometry and morphology as determined by Auger electron spectroscopy and atomic force microscopy measurements. The (1 Multiplication-Sign 1), (2 Multiplication-Sign 2), and ({radical}(3) Multiplication-Sign {radical}(3))R30 Degree-Sign superstructures are terminated by single group-III-adatoms, whereas the (1 + 1/6) exhibits a incommensurate overlayer of group-III-atoms. We show that the (2 Multiplication-Sign 2) and ({radical}(3) Multiplication-Sign {radical}(3))R30 Degree-Sign an In depletion in the first group-III layer and In or Ga adatoms in ontop position. Strain-relaxation is suggested to explain this structure formation.

36 MATERIALS SCIENCE↗

Synthesis and characterisation of the novel double perovskites La{sub 2}CrB{sub 2/3}Nb{sub 1/3}O{sub 6}, B = Mg, Ni, Cu

Highlights: ► La{sub 2}CrB{sub 2/3}Nb{sub 1/3}O{sub 6}, B = Mg, Ni, Cu perovskites adopt the GdFeO{sub 3} type structure. ► HREM and ED study indicating week ordering of B-cations for B = Mg. ► Antiferromagnetics with T{sub N} 90 (Mg), 125 (Ni) and 140 K (Ni). -- Abstract: The novel perovskites La{sub 2}CrB{sub 2/3}Nb{sub 1/3}O{sub 6}, B = Mg, Ni, and Cu have been synthesised at 1350 °C in air via the citrate route. Rietveld refinements using neutron powder diffraction (NPD) data showed that the compounds adopt the GdFeO{sub 3} type structure with space group Pbnm, and unit cell parameters a≈b≈√(2)×a{sub p} and c ≈ 2 × a{sub p}, where a{sub p} ≈ 3.8 Å. Selected area electron diffraction (SAED) of B = Ni and Cu samples confirmed space group Pbnm. However, distinct reflections forbidden in Pbnm symmetry, but allowed in the monoclinic sub-group P2{sub 1}/n and unit cell parameters a≈b≈√(2)×a{sub p} and c ≈ 2 × a{sub p}, β ≈ 90° were present in SAED patterns of B = Mg sample. This indicates an ordering of the B-cations within the crystal structure of La{sub 2}CrMg{sub 2/3}Nb{sub 1/3}O{sub 6}. High-resolution electron microscopy (HREM) study indicating uniform, without formation of clusters, ordering of B-cations in the crystallites of La{sub 2}CrMg{sub 2/3}Nb{sub 1/3}O{sub 6}. Magnetic susceptibility measurements show that the compounds are antiferromagnetic (with some glass or spin clustering effects due to additional ferromagnetic interactions between the B-cations) with T{sub N} for La{sub 2}CrB{sub 2/3}Nb{sub 1/3}O{sub 6}, B = Mg, Ni, Cu being 90, 125 and 140 K, respectively.

36 MATERIALS SCIENCE↗

Variable Energy 2-MeV S-Band Linac for X-ray and Other Applications

We will describe the design and operation of a compact, 2-MeV, S-band linear accelerator (linac) with variable energy tuning and short-pulse operation down to 15 ps with 100-A peak current. The design consists of a buncher cavity for short-pulse operation and two coupled resonator sections for acceleration. Single-pulse operation is accomplished through a fast injector system with a 219-MHz subharmonic buncher. The machine is intended to support a variety of applications, such as X-ray and electron beam diagnostic development and, recently, electron diffraction studies of phase transitions in shocked materials.

43 PARTICLE ACCELERATORS↗

Growth of strontium ruthenate films by hybrid molecular beam epitaxy

We report on the growth of epitaxial Sr 2 RuO 4 films using a hybrid molecular beam epitaxy approach in which a volatile precursor containing RuO 4 is used to supply ruthenium and oxygen. The use of the precursor overcomes a number of issues encountered in traditional molecular beam epitaxy that uses elemental metal sources. Phase-pure, epitaxial thin films of Sr 2 RuO 4 are obtained. At high substrate temperatures, growth proceeds in a layer-by-layer mode with intensity oscillations observed in reflection high-energy electron diffraction. Films are of high structural quality, as documented by x-ray diffraction, atomic force microscopy, and transmission electron microscopy. In conclusion, the method should be suitable for the growth of other complex oxides containing ruthenium, opening up opportunities to investigate thin films that host rich exotic ground states.

36 MATERIALS SCIENCE↗