Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Effect of formation temperature on properties of graphite/stannum composite for bipolar plate

Bipolar plates are key components in Proton Exchange Membrane (PEM) fuel cells. They carry current away from the cell and withstand the clamping force of the stack assembly. Therefore, PEM fuel cell bipolar plates must have high electrical conductivity and adequate mechanical strength, in addition to being light weight and low cost in terms of both applicable materials and production methods. In this research, the raw materials used to fabricate the high performance bipolar plate are Graphite (Gr), Stannum (Sn) and Polypropylene (PP). All materials used was in powder form and Gr and Sn act as fillers and the PP acts as binder. The ratio of fillers (Gr/Sn) and binder (PP) was fixed at 80:20. For the multi-conductive filler, small amount of Sn, which is 10 up to 20wt% (from the total weight of fillers 80%) have been added into Gr/Sn/PP composite. The fillers were mixed by using the ball mill machine. The second stage of mixing process between the mixer of fillers and binder is also carried out by using ball mill machine before the compaction process by the hot press machine. The effect of formation temperatures (160°C-170°C) on the properties of Gr/Sn/PP composite had been studied in detail, especially the electrical conductivity, bulk density, hardness and microstructure analysis of Gr/Sn/PP composite. The result shows that there are significant improvement in the electrical conductivity and bulk density, which are exceeding the US-DoE target with the maximum value of 265.35 S/cm and 1.682g/cm{sup 3} respectively.

36 MATERIALS SCIENCE↗

Organometallic Polymeric Conductors

For aerospace applications, the use of polymers can result in tremendous weight savings over metals. Suitable polymeric materials for some applications like EMI shielding, spacecraft grounding, and charge dissipation must combine high electrical conductivity with long-term environmental stability, good processability, and good mechanical properties. Recently, other investigators have reported hybrid films made from an electrically conductive polymer combined with insulating polymers. In all of these instances, the films were prepared by infiltrating an insulating polymer with a precursor for a conductive polymer (either polypyrrole or polythiophene), and oxidatively polymerizing the precursor in situ. The resulting composite films have good electrical conductivity, while overcoming the brittleness inherent in most conductive polymers. The highest conductivities reported (approximately 4/Scm) were achieved with polythiophene in a polystyrene host polymer. The best films using a polyamide as base polymer were four orders of magnitude less conductive than the polystyrene films. The authors suggested that this was because polyimides were unable to swell sufficiently for infiltration of monomer as in the polystyrene. It was not clear, however, if the different conductivities obtained were merely the result of differing oxidation conditions. Oxidation time, temperature and oxidant concentration varied widely among the studies.

Source record↗

Structure, properties, and applications of polyacrylonitrile/carbon nanotube ( CNT ) fibers at low CNT loading

Abstract Bi‐component, polyacrylonitrile (PAN)/carbon nanotube (CNT) fibers were processed, at different core‐sheath area ratios, by gel spinning. A percolated CNT network at 10 wt% CNT in the sheath enhanced electrical conductivity as compared to the neat PAN fiber, while PAN polymer in the core contributed to the good mechanical properties. Fibers with relatively thin sheath allowed overall CNT loading as low as 3.7 wt% to be made with good electrical conductivity, and PAN stabilization by Joule heating was demonstrated. Such fibers with combined good mechanical properties and electrical conductivity can also potentially be used for electrical heating of fabrics, for making smart textiles, and for electromagnetic interference shielding.

Lu, Mingxuan↗

Role of atomistic structure in the stochastic nature of conductivity in substoichiometric tantalum pentoxide

First-principles calculations of electrical conductivity (σ{sub o}) are revisited to determine the atomistic origin of its stochasticity in a distribution generated from sampling 14 ab-initio molecular dynamics configurations from 10 independently quenched models (n = 140) of substoichiometric amorphous Ta{sub 2}O{sub 5}, where each structure contains a neutral O monovacancy (V{sub O}{sup 0}). Structural analysis revealed a distinct minimum Ta-Ta separation (dimer/trimer) corresponding to each V{sub O}{sup 0} location. Bader charge decomposition using a commonality analysis approach based on the σ{sub o} distribution extremes revealed nanostructural signatures indicating that both the magnitude and distribution of cationic charge on the Ta subnetwork have a profound influence on σ{sub o}. Furthermore, visualization of local defect structures and their electron densities reinforces these conclusions and suggests σ{sub o} in the amorphous oxide is best suppressed by a highly charged, compact Ta cation shell that effectively screens and minimizes localized V{sub O}{sup 0} interaction with the a-Ta{sub 2}O{sub 5} network; conversely, delocalization of V{sub O}{sup 0} corresponds to metallic character and high σ{sub o}. The random network of a-Ta{sub 2}O{sub 5} provides countless variations of an ionic configuration scaffold in which small perturbations affect the electronic charge distribution and result in a fixed-stoichiometry distribution of σ{sub o}; consequently, precisely controlled and highly repeatable oxide fabrication processes are likely paramount for advancement of resistive memory technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magneli Phases TinO2n-1 Nanowires: Formation, Optical, and Transport Properties

We have prepared triclinic Ti8O15 nanowires and Ti4O7 quasi-one-dimensional fibers by heat-treating thick H2Ti3O7 nanowires under hydrogen atmospheres at 850 and 1050 C, respectively. In contrast to wide-bandgap semiconducting tetragonal TiO2, both Ti8O15 and Ti4O7 exhibit high electrical conducting behavior at room temperature. The electrical conductivities of Ti8O15 and Ti4O7 are, respectively, 0.24 and 10.4 S/cm at 300 K, and 2.4x10-5 and 4x10-3 S/cm at 77 K. In both materials, the light absorption band covers the full visible-light spectrum region and extends into the near-infrared region.

08 HYDROGEN↗

Carbon cladded composite flow field plate, bipolar plate and fuel cell

The present invention provides a carbon-cladded composite composition for use as a fuel cell flow field plate or bipolar plate. In one preferred embodiment, the composition comprises a core composite layer sandwiched between two clad layers, wherein (a) the clad layer comprises a conductive carbon or graphite material (e.g., carbon nano-tubes, nano-scaled graphene plates, graphitic nano-fibers, and fine graphite particles); (b) the core composite layer comprises a matrix resin and a conductive filler present in a sufficient quantity to render the composite layer electrically conductive with an electrical conductivity no less than 1 S/cm (preferably no less than 100 S/cm); and (c) the composition has a planar outer surface on each clad side having formed therein a fluid flow channel.

30 DIRECT ENERGY CONVERSION↗

Crystal structure, chemical expansion and phase stability of HoMnO{sub 3} at high temperature

Anisotropic thermal and chemical expansion of hexagonal HoMnO{sub 3} was investigated by high temperature X-ray diffraction in inert (N{sub 2}) and oxidizing (air) atmospheres up to 1623 K. A second order structural phase transition directly from P6{sub 3}cm to P6{sub 3}/mmc was found at 1298{+-}4 K in N{sub 2} atmosphere, and 1318{+-}4 K in air. For the low temperature polymorph P6{sub 3}cm the contraction of the c-axis was more rapid in inert than in oxidizing atmosphere. The c-axis of the P6{sub 3}/mmc polymorph of HoMnO{sub 3} displayed anomalously high expansion above 1400 K, which is discussed in relation to chemical expansion caused by point defects. The a-axis expanded stronger in inert than oxidizing atmosphere. Anisotropic chemical and thermal expansion of the P6{sub 3}cm phase of YMnO{sub 3} in N{sub 2}, air and O{sub 2} atmospheres was found to be qualitatively similar to that of HoMnO{sub 3}. Decomposition of hexagonal HoMnO{sub 3} by two different processes occurs in oxidizing atmosphere above {approx}1200 K followed by nucleation and growth of the perovskite polymorph of HoMnO{sub 3}. A rapid, reconstructive transition from the perovskite back to the hexagonal polymorph was observed in situ at 1623 K upon reduction of the partial pressure of oxygen. A phase stability diagram of the hexagonal and orthorhombic polymorphs is proposed. Finally, distinctly non-linear electrical conductivity was observed for both HoMnO{sub 3} and YMnO{sub 3} in oxidizing atmosphere between 555 and 630 K, and shown to be associated with excess oxygen. - Graphical abstract: Chemical expansion of hexagonal HoMnO{sub 3} is observed during HTXRD in different pO{sub 2}. Oxidizing atmosphere favors the competing perovskite polymorph. Electrical conductivity anomalies related to excess oxygen are found at 550-630 K. Highlights: Black-Right-Pointing-Pointer Thermal evolution of crystal structure of HoMnO{sub 3} studied up to 1623 K in air and N{sub 2}. Black-Right-Pointing-Pointer Anisotropic chemical expansion of HoMnO{sub 3} and YMnO{sub 3} in N{sub 2}, air and O{sub 2}. Black-Right-Pointing-Pointer Hexagonal phase destabilized with respect to perovskite in oxidizing atmosphere. Black-Right-Pointing-Pointer Crystal structure and phase stability discussed in terms of point defect chemistry. Black-Right-Pointing-Pointer Electrical conductivity anomalies associated with excess oxygen at 550-630 K.

36 MATERIALS SCIENCE↗

Fouling-Resistant Membranes for Treating Concentrated Brines for Water Reuse in Advanced Energy Systems- Final Technical Report

The high total dissolved solids (TDS) levels in the wastewater quality generated from unconventional oil and gas development make the current state-of-the art approach to water treatment/disposal untenable. Our proposed membrane technology approach addresses the two major challenges associated with this water: 1) the membrane distillation process removes the high TDS content, which is often 8 times higher than that of seawater, and 2) our novel membrane coating prevents the formation of scale that would otherwise pose a significant operational hurdle. This is accomplished through next-generation electrically conductive membranes that mitigate fouling beyond what is currently possible, and allow for the flexibility to treat to the water to levels desirable for multiple reuse options, thus reducing fresh water withdrawal, all the way to direct disposal into the environment. The overall project objective was to demonstrate the efficacy of membrane distillation (MD) as a cost-savings technology to treat concentrated brines (such as, but not limited to, produced waters generated from fossil fuel extraction) that have high levels of TDS for beneficial water reuse in power production and other industrial operations as well as agricultural and municipal water uses. In addition, a novel fouling-resistant nanocomposite membrane was developed to reduce the need for chemicals to address membrane scaling due to the precipitation of divalent ions in high-TDS waters and improve overall MD performance via an electrically conductive membrane distillation process (ECMD). This anti-fouling membrane technology platform is based on incorporating carbon nanotubes (CNTs) into the surface layer of existing, commercially available MD membranes. The CNTs impart electrical conductivity to the membrane surface to prevent membrane scaling and fouling when an electrical potential is applied.

36 MATERIALS SCIENCE↗

Point defects diagrams for pure and doped copper oxide Cu{sub 2{+-}{delta}}O in the temperature range of 873-1473 K

Point defects diagrams for the Cu{sub 2{+-}{delta}}O, both pure and doped with M{sup 2+} metal ions with all the types of defects in the cation sublattice considered are presented in this work. The calculations of the diagrams were performed by a novel method. The calculations were based on the data from the results of the studies of the deviation from stoichiometry and the electrical conductivity in the temperature range of 873-1473 K. The values of {Delta}G{sup o} of the formation of Frenkel-type defects, of copper vacancies, and of interstitial copper atoms were determined and their temperature dependence. It was shown that character of the dependence of the sum of concentrations of electronic defects ([h{sup Bullet }]+b[e Prime ]) on p{sub O{sub 2}} is fully consistent with its dependence of the electrical conductivity. Their mobility ({mu}{sub e}/{mu}{sub h}=b), vary from 1300 to 30. The dope M{sup 2+} increases the concentration of electrons and shifts the minimum of electrical conductivity toward higher oxygen pressures. - Graphical abstract: This work presents point defects diagrams for the Cu{sub 2{+-}{delta}}O, with all the types of defects in the cation sublattice considered. Highlights: Black-Right-Pointing-Pointer The point defects diagrams. Copper oxide Cu{sub 2{+-}{delta}}O, for pure and M{sup 2+} doped. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation of Frenkel-type defects were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation QUOTE QUOTE of singly-ionized copper vacancies were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation of electroneutral copper vacancies were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation and of interstitial copper atoms were determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Difficulty of carrier generation in orthorhombic PbO

Polycrystalline β-PbO films were grown by pulsed laser deposition in atmospheres ranging from oxygen-poor (the oxygen pressure of 0.01 Pa) to oxygen-rich (13 Pa) conditions, and the oxygen chemical potential was further enhanced by ozone annealing to examine hole doping. It was found that each of the as-grown β-PbO films showed poor electrical conductivity, σ < 1.4 × 10{sup −7} S cm{sup −1}, regardless of the oxygen pressure. The density functional calculations revealed that native defects including Pb and O vacancies have deep transition levels and extremely high formation enthalpies, which indicates difficulty of carrier generation in β-PbO and explains the experimentally observed poor electrical conductivity. The analysis of the electronic structures showed that the interaction between Pb 6s and O 2p orbitals is weak due to the deep energy level of Pb 6s and does not raise the valence band maximum (VBM) level unlike that observed in SnO, which is also supported by ultraviolet photoemission spectroscopy measurements. The deep acceptor transition levels of the native defects are attributed to the deep VBM of β-PbO. On the other hand, annealing β-PbO films in reactive oxygen-containing atmospheres (i.e., O{sub 3}) led to a significantly enhanced electrical conductivity (i.e., σ > 7.1 × 10{sup 2} S cm{sup −1}) but it is the result of the formation of an n-type PbO{sub 2} phase because oxygen chemical potential exceeded the phase boundary limit. The striking difference in carrier generation between PbO and SnO is discussed based on the electronic structures calculated by density functional theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Process development of 99.95% pure copper processed via selective electron beam melting and its mechanical and physical properties

Highlights: • Additively manufactured dense copper samples (>99.5%) • Measured electrical conductivity >58 MS/m (>100% IACS) • Equiaxed grain structure • 177 N/mm{sup 2} tensile strength, 87 N/mm{sup 2} yield strength, 59% elongation at fracture - Abstract: Additive manufacturing by selective electron beam melting (SEBM) was used to fabricate pure copper specimens. A process window at process temperature of 530 °C, gives the required beam powers and deflection speeds for manufacturing dense specimens (>99.5%). The microstructure of SEBM specimens was analyzed by using optical and scanning electron microscopy (SEM). Electrical conductivity, thermal conductivity, hardness, and mechanical performance were investigated by using eddy current, laser flash analysis, Vickers hardness and tensile tests, respectively. It was found that the variation of beam power and scan speed results in different microstructures from columnar to nearly equiaxed grain. The electrical conductivity of SEBM-processed specimens was above 58 MS/m (>100 IACS) while their hardness was around 55 HV0.05 and 46 HV5 without any dependency on processing parameters within the process window. The tensile tests revealed how vertical cracks affect the mechanical strength under tensile loading condition. The results of this study not only show a reliable process window but also introduce the links between processing parameters, defect formations, conductivity and mechanical strength of pure copper specimens manufactured by SEBM.

36 MATERIALS SCIENCE↗

Dielectric properties of Ba{sub 3-x}K{sub x}CaNb{sub 2}O{sub 9-{delta}} (0.5 < x < 1.25) (KBCN) double perovskites

Graphical abstract: Electrical conductivity, dielectric constant and dielectric loss of Ba{sub 1.75}K{sub 1.25}CaNb{sub 2}O{sub 9-{delta}} in air at 400-700 {sup o}C. Research highlights: {yields} We show the effectiveness of AC impedance spectroscopy to screen dielectric materials and to understand contributing effects on the dielectric properties of polycrystalline metal oxides. {yields} Unlike Ba{sub 3}CaNb{sub 2}O{sub 9}, Ba{sub 3-x}K{sub x}CaNb{sub 2}O{sub 9-{delta}} exhibits negligible grain-boundary and electrode effects to the total electrical properties and is consistent with perovskite-type K-doped BaZrO{sub 3}. {yields} Among the samples investigated, Ba{sub 1.75}K{sub 1.25}CaNb{sub 2}O{sub 9-{delta}} sintered at 1100 {sup o}C showed the highest dielectric constant of 65 at 10{sup 6} Hz and dielectric loss of 0.14 at 400 {sup o}C in air. -- Abstract: We report synthesis, structure and dielectric properties of double perovskite-type Ba{sub 3-x}K{sub x}CaNb{sub 2}O{sub 9-{delta}} (x = 0.5, 0.75, 1, 1.25) (KBCN). Powder X-ray diffraction (XRD) confirmed the formation of double perovskite-type structure and lattice constant decreases with increasing K in KBCN. AC impedance study showed a single semicircle over the investigated temperatures and frequencies in dry H{sub 2}, H{sub 2} + 3% H{sub 2}O, 3% H{sub 2}O + N{sub 2}, while two semicircles were observed at low temperatures in air, which could be attributed to bulk and grain-boundary contributions. Unlike un-doped BCN, KBCN exhibits negligible grain-boundary and electrode effects to the total electrical properties and is consistent with perovskite-type K-doped BaZrO{sub 3}. The bulk dielectric constant and dielectric loss were found to increase with increasing K content in KBCN and also found to change with sintering temperature. Among the samples investigated, Ba{sub 1.75}K{sub 1.25}CaNb{sub 2}O{sub 9-{delta}} sintered at 1100 {sup o}C showed the highest dielectric constant of 65 at 10{sup 6} Hz and dielectric loss of 0.14 at 400 {sup o}C in air. Isothermal dielectric constant and electrical conductivity at 1 MHz were found to be independent at elevated temperatures, while vary at low-frequency and low temperatures. Below 700 {sup o}C, dielectric constant and dielectric loss decreases with increasing frequency, whereas an opposite trend was observed for the electrical conductivity.

36 MATERIALS SCIENCE↗

Polycrystalline Mg{sub 2}Si thin films: A theoretical investigation of their electronic transport properties

The electronic structures and thermoelectric properties of a polycrystalline Mg{sub 2}Si thin film have been investigated by first-principle density-functional theory (DFT) and Boltzmann transport theory calculations within the constant-relaxation time approximation. The polycrystalline thin film has been simulated by assembling three types of slabs each having the orientation (001), (110) or (111) with a thickness of about 18 Å. The effect of applying the relaxation procedure to the thin film induces disorder in the structure that has been ascertained by calculating radial distribution functions. For the calculations of the thermoelectric properties, the energy gap has been fixed at the experimental value of 0.74 eV. The thermoelectric properties, namely the Seebeck coefficient, the electrical conductivity and the power factor, have been determined at three temperatures of 350 K, 600 K and 900 K with respect to both the energy levels and the p-type and n-type doping levels. The best Seebeck coefficient is obtained at 350 K: the S{sub yy} component of the tensor amounts to about ±1000 μV K{sup −1}, depending on the type of charge carriers. However, the electrical conductivity is much too small which results in low values of the figure of merit ZT. Structure–property relationship correlations based on directional radial distribution functions allow us to tentatively draw some explanations regarding the anisotropy of the electrical conductivity. Finally, the low ZT values obtained for the polycrystalline Mg{sub 2}Si thin film are paralleled with those recently reported in the literature for bulk chalcogenide glasses. - Graphical abstract: Structure of the polycrystalline thin film of Mg{sub 2}Si. - Author-Highlights: • Polycrystalline Mg{sub 2}Si film has been modelled by DFT approach. • Thermoelectric properties have been evaluated by semi-classical Boltzmann theory. • The structure was found to be slightly disordered after relaxation. • The highest value of Seebeck coefficient reaches −1000 μV/K at 350 K. • The ZT value is estimated between 0.0175 at 350 K and 0.2 at 900 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the thermally activated charge transport in NaPb m SbQ m+2 (Q = S, Se, Te) thermoelectrics: weak dielectric screening leads to grain boundary dominated charge carrier scattering

Many thermoelectric materials feature irregular electrical conductivity with thermally activated transport below ~600 K and metallic behavior at high temperatures, despite possessing degenerate carrier concentrations. The suppression of the electrical conductivity ultimately degrades the thermoelectric performance on the cold side and limits the device energy conversion efficiency. As such, establishing the origin of the low temperature scattering and developing strategies to mitigate its effect are paramount issues. To date, the correct microscopic description of the low temperature carrier scattering remains an open issue, and there is little work addressing why some thermoelectric materials are more susceptible to the deleterious behavior. Here, we use the promising thermoelectric alloys of PbQ and NaSbQ 2 (Q = S, Se, Te) as model systems to address these concerns. We directly show the thermally activated transport stems from the scattering of charge carriers by the grain boundaries (GBs), and that the expected metallic electrical conductivity is recovered by preparing large grained samples with reduced densities of GBs. We furthermore study the electrical properties NaPb m SbSe m+2 as a function of NaSbSe 2 fraction, as well as those of the chalcogenide analogues, PbTe–NaSbTe 2 and PbS–NaSbS 2 , and demonstrate that the strength of GB scattering can be understood by utilizing simple chemical principles. By considering the polarizability of the host atoms, we directly relate the magnitude of GB scattering to the relative degree of charge carrier screening in each material, and demonstrate that GB scattering is strongest in the ionic NaSbQ 2 -rich compounds and weakest in more polarizable PbQ-rich phases. We finally show how these chemical arguments elegantly explain the strong GB scattering in numerous other thermoelectric materials. By uniting the deleterious charge transport properties exhibited by many different compounds into a common picture, we discuss how our work gives design principles for proper microstructure engineering in emerging thermoelectric materials.

36 MATERIALS SCIENCE↗

Evaluation of high strength, high conductivity CuNiBe alloys for fusion energy applications

The unirradiated tensile properties for several different heats and thermomechanical treatment conditions of precipitation strengthened Hycon 3HPTM CuNiBe (Cu-2%Ni-0.35%Be in wt.%) have been measured over the temperature range of 20-500 C for longitudinal and long transverse orientations. The room temperature electrical conductivity has also been measured for several heats, and the precipitate microstructure was characterized using transmission electron microscopy. The CuNiBe alloys exhibit very good combination of strength and conductivity at room temperature, with yield strengths of 630-725 MPa and electrical conductivities of 65-72% International Annealed Copper Standard (IACS). The strength remained relatively high at all test temperatures, with yield strengths of 420-520 MPa at 500 C. However, low levels of ductility (<5% uniform elongation) were observed at test temperatures above 200-250 C, due to flow localization near grain boundaries (exacerbated by having only 10-20 grains across the gage thickness of the miniaturized sheet tensile specimens). Scanning electron microscopy observation of the fracture surfaces found a transition from ductile transgranular to ductile intergranular fracture with increasing test temperature. Fission neutron irradiation to a dose of ~0.7 displacements per atom (dpa) at temperatures between 100 and 240 C produced a slight increase in strength and a significant decrease in ductility. The measured tensile elongation increased with increasing irradiation temperature, with a uniform elongation of ~3.3% observed at 240 C. The electrical conductivity decreased slightly following irradiation, due to the presence of defect clusters and Ni, Zn, Co transmutation products. Considering also previously published fracture toughness data, this indicates that CuNiBe alloys have irradiated tensile and electrical properties comparable or superior to CuCrZr and oxide dispersion strengthened copper at temperatures <250 C, and may be an attractive candidate for certain fusion energy structural applications. Conversely, CuNiBe may not be preferred at intermediate temperatures of 250-500 C due to the poor ductility and fracture toughness of CuNiBe alloys at temperatures >250 C. The potential deformation mechanisms responsible for the transition from transgranular to intergranular fracture are discussed. The possible implications for other precipitation hardened alloys such as nickel based superalloys are briefly discussed.

Zinkle, Steven J↗

Local Measurement in Annular Flows Using a Two-Sensor Droplet-Capable Conductivity Probe

Two-sensor electrical conductivity probes have been widely used for detailed local measurement in two-phase flow systems. However application of conductivity probes in liquid-dispersed flows has been limited. In the churn-turbulent to annular transition and annular flow regimes, the liquid phase exists as a continuous phase in the film and ligaments, and as a dispersed phase in the droplets. The conventional design of a conductivity probe is not valid because it cannot distinguish the dispersed liquid phase from the gas phase. In this paper, the Two-Sensor Droplet-Capable Conductivity Probe (DCCP-2) is designed in order to extend measurement capability to liquid-dispersed flows. The liquid phase is classified into droplets and ligaments. The interface velocity, volume fraction, interfacial area concentration, as well as the chord length of liquid droplets and ligaments, can be calculated from the raw signal. The radial distribution of these parameters and the probability distribution of chord length and velocity are obtained for downwards flow in a vertical pipe. The results show that although the average volume fraction of droplets is only on the order of 1%, droplets contribute to around 20%-30% to the entrained liquid phase in the gas core, the remainder as ligaments. The interfacial area concentration from droplets and ligaments are in the order of 300 m{sup -1}. (authors)

42 ENGINEERING↗

Preparation and Characterization of Space Durable Polymer Nanocomposite Films from Functionalized Carbon Nanotubes

Low color, flexible, space durable polyimide films with inherent, robust electrical conductivity have been under investigation as part of a continuing materials development activity for future NASA space missions involving Gossamer structures. Electrical conductivity is needed in these films to dissipate electrostatic charge build-up that occurs due to the orbital environment. One method of imparting conductivity is through the use of single walled carbon nanotubes (SWNTs). However, the incompatibility and insolubility of the SWNTs severely hampers their dispersion in polymeric matrices. In an attempt to improve their dispersability, SWNTs were functionalized by the reaction with an alkyl hydrazone. After this functionalization, the SWNTs were soluble in select solvents and dispersed more readily in the polymer matrix. The functionalized SWNTs were characterized by Raman spectroscopy and thermogravimetric analysis (TGA). The functionalized nanotubes were dispersed in the bulk of the films using a solution technique. The functionalized nanotubes were also applied to the surface of polyimide films using a spray coating technique. The resultant polyimide nanocomposite films were evaluated for nanotube dispersion, electrical conductivity, mechanical, and optical properties and compared with previously prepared polyimide-SWNT samples to assess the effects of SWNT functionalization.

Delozier, D. M.↗

Effect of Oxygen on the Conductive Properties of Thin Films of Nonconductive Polymer

The influence of the atmosphere on the electrical conductivity of polydiphenylenephthalide (PDP) films included in the ITO–PDP–Sb sandwich structure is discussed. On the basis of electrophysical measurements and quantum-chemical simulation, a conclusion is drawn that the main contribution to the electrical conductivity of the PDP films comes from oxygen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗