Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EQUATIONS OF MOTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1967

Integrating Matrix Method for Determining the Natural Vibrations of a Rotating, Unsymmetrical Beam with Application to Twisted Propeller Blades

A numerical method is Presented for determining the natural vibration frequencies, and the corresponding mode shapes, of a rotating cantilever beam which has a nonuniform, unsymmetrical cross section. Two coupled fourth-order differential equations of motion with variable coefficients are derived which govern the motion of such a beam having deformations in two directions. Through the development and utilization of the integrating matrix, the solution of the differential equations is obtained in the form of an eigenvalue problem. The solutions to the eigenvalue problem are determined by an iteration method based upon a special orthogonality relationship which is derived. Numerical examples, including an application to a twisted propeller blade, are presented with the results of the integrating matrix solutions being compared to exact solutions and experimental data.

Hunter, William F.↗
NASA NTRS1974

Stability of a dual-spin satellite with two dampers

The rotational stability of a dual-spin satellite consisting of a main body and a symmetric rotor, both spinning about a common axis, is investigated. The main body is equipped with a spring-mass damper, while a partially filled viscous ring damper is mounted on the rapidly spinning rotor. The effect of fluid motion on the rotational stability of the satellite is calculated, considering the fluid as a single particle moving in a tube with viscous damping. Time constants are obtained by solving approximate equations of motion for the nutation-synchronous and the spin-synchronous modes, and the results are found to agree well with the numerical integrations of the exact equations. A limit cycle may exist for some configurations; the nutation angle tends to increase in such cases.

Alfriend, K. T.↗
NASA NTRS1981

Motion of the angular momentum vector in body coordinates for torque-free dual-spin spacecraft

The motion of the angular momentum vector in body coordinates for torque free, asymmetric dual spin spacecraft without and, for a special case, with energy dissipation on the main spacecraft is investigated. Without energy dissipation, two integrals can be obtained from the Euler equations of motion. Using the classical method of elimination of variable, the motion about the equilibrium points (six for the general case) are derived with these integrals. For small nutation angle, theta, the trajectories about the theta = 0 deg and theta = 180 deg points readily show the requirements for stable motion about these points. Also the conditions needed to eliminate stable motion about the theta = 180 deg point as well as the other undesireable equilibrium points follow directly from these equations. For the special case where the angular momentum vector moves about the principal axis which contains the momentum wheel, the notion of 'free variable' azimuth angle is used. Physically this angle must vary from 0 to 2 pi in a circular periodic fashion. Expressions are thus obtained for the nutation angle in terms of the free variable and other spacecraft parameters. Results show that in general there are two separate trajectory expressions that govern the motion of the angular momentum vector in body coordinates.

Fedor, J. V.↗
DOE OSTI2022

Hidden conformal symmetries from Killing towers with an application to large-D/CFT

We generalize the notion of hidden conformal symmetry in Kerr/CFT to Kerr-(A)dS black holes in arbitrary dimensions. We build the SL(2, R) generators directly from the Killing tower, whose Killing tensors and Killing vectors enforce the separability of the equations of motion. Our construction amounts to an explicit relationship between hidden conformal symmetries and Killing tensors: we use the Killing tower to build a novel tensor equation connecting the SL(2,R) Casimir with the radial Klein-Gordon operator. For asymptotically flat black holes in four and five dimensions we recover previously known results that were obtained using the ``near-region'' limit and the monodromy method. We then perform a monodromy evaluation of the Klein-Gordon scalar wave equation for all Kerr-(A)dS black holes, finding explicit forms for the zero mode symmetry generators. We also extend this analysis to the large-dimensional Schwarzschild black hole as a step towards buliding a Large-D/CFT correspondence.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1972

A passive balancer for a class of rotating spacecraft

Equations of motion are derived for a flexibly connected dual-spin spacecraft equipped with four pendulumlike passive controllers for mass balance and spin axis control. These equations are constrained and used to determine the conditions required for successful steady-state operation of the controllers with a spinning, rigid-body spacecraft. Generalized controller sizing criteria are derived and related to limiting values of system time constant for an example spacecraft unbalance condition. A generalized real-time computer simulation of a large, slowly spinning rigid-body spacecraft equipped with passive controllers is also presented. Numerical results of this simulation show that passive controllers can successfully balance a class of rotating rigid bodies undergoing large internal mass and inertial disturbances. The ratio of total controller mass to spacecraft mass need not be greater than 1 to 2 percent.

Martz, C. W.↗
NASA NTRS1974

Manual control

Man's nonlinear characteristics and his use of control with compatible and incompatible multiple inputs, both visual and vestibular were studied. Experiments were also made with pulse and bang-bang controllers and the effects of sudden changes in control stick mechanical impedance. Closing the loop through the dynamics of the controlled vehicle allowed experiments on the limits of control of unstable vehicles with and without motion cues. The inverted pendulum controlled element, programmed as a self pacing element, was used extensively as a scalar performance index. In addition, the motorbike equations of motion were studied with regard to required human equalization. Abstracts are included for a series of published data on manual control.

Source record↗
NASA NTRS1976

An investigation of flap-lag stability of wind turbine rotors in the presence of velocity gradients and helicopter rotors in forward flight

The flap-lag equations of motion of a torsionally rigid and centrally hinged spring-restrained rigid blade are developed using quasi-steady blade-element aerodynamic theory. These equations have periodic coefficients and are applicable to both wind-turbine rotors with velocity gradients and helicopter rotors in forward flight. By solving these equations both by the Floquet-Liapunov method and by an approximate method, the range of applicability of the latter method is established. Flap-lag and pure flapping stability boundaries illustrating the effects of flow and rotor parameters are presented. Finally, some discussion on the techniques for generating the Floquet transition matrix and on the relative merits of the coordinate axes system is presented.

Kaza, K. R. V.↗
NASA NTRS1977

Stabilization of Kepler's problem

A regularization of Kepler's problem due to Moser (1970) is used to stabilize the equations of motion. In other words, a particular solution of Kepler's problem is imbedded in a Liapunov stable system. Perturbations can be introduced into the stabilized equations.

Stokes, A.↗
NASA NTRS1978

A model for close encounters in the planetary problem

A model is proposed for single close encounters between two small masses, m1 and m2, which orbit a much larger mass, M. The main new feature of the model is the assumption of conic motion of the center of mass of m1 and m2 in the gravitational field of M. Comparisons of the model with the three-body equations of motion indicate that the model is a useful approximation for m1, m2 not exceeding 0.00001 M. The model is therefore applicable for encounters between bodies of the order of an earth mass or smaller in the presence of the sun. Comparisons are also made of outcomes obtained by the model with outcomes of numerical integration for a large variety of close encounters. The above comparisons reveal that for many purposes the model is an adequate approximation for encounters with an eccentricity of the hyperbolic orbit of m1 about m2 not less than 4.

Cox, L. P.↗
NASA NTRS1979

Gust alleviation using direct turbulence measurements

The research reported upon in this paper describes an effective method of gust alleviation using direct measurements of atmospheric turbulence to drive the aircraft control surfaces in a way that attempts to directly counter or cancel those forces and moments produced on the aircraft by gusts. The method yields a feedforward or open loop control law, simple to mechanize and relatively insensitive to changes in flight condition. When applied directly, the resulting control law effectively gust-alleviates in the low frequency phugoid and short period range but has a tendency to amplify structural mode vehicle motions due to the phase lag of the actuators. A method of design based upon the use of a diagonal or Jordan form of the equations of motion enables the designer to avoid this problem of structural mode excitation.

Rynaski, E. G.↗
NASA NTRS1980

Volcanic explosion clouds - Density, temperature, and particle content estimates from cloud motion

Photographic records of 10 vulcanian eruption clouds produced during the 1978 eruption of Fuego Volcano in Guatemala have been analyzed to determine cloud velocity and acceleration at successive stages of expansion. Cloud motion is controlled by air drag (dominant during early, high-speed motion) and buoyancy (dominant during late motion when the cloud is convecting slowly). Cloud densities in the range 0.6 to 1.2 times that of the surrounding atmosphere were obtained by fitting equations of motion for two common cloud shapes (spheres and vertical cylinders) to the observed motions. Analysis of the heat budget of a cloud permits an estimate of cloud temperature and particle weight fraction to be made from the density. Model results suggest that clouds generally reached temperatures within 10 K of that of the surrounding air within 10 seconds of formation and that dense particle weight fractions were less than 2% by this time. The maximum sizes of dense particles supported by motion in the convecting clouds range from 140 to 1700 microns.

Wilson, L.↗
NASA NTRS1980

Structural dynamics payload loads estimates

Present analytical techniques by which design loads are predicted are very costly and time consuming. Chapter I presents the standard techniques used to analyze payload/booster systems. They are full scale methods in the sense that they all require the solution of the coupled equations of motion of the payload/booster system. Chapter II identifies several short cut methodologies. These already existing techniques do not require the solution of the coupled system equations. The potentials and shortcomings of each of these methods are discussed. Chapter III covers the favored methods accompanied by recommendations for further development, refinement, and demonstrations. An outline of a new approach is also included.

Engels, R. C.↗
NASA NTRS1982

Gain-enhanced free-electron laser with an electromagnetic pump field

The feasibility of enhancing the gain for the free electron laser (FEL) with an electromagnetic (EM) pump field has been considered. The enhancement is provided by reacceleration of the electrons in the interaction region by means of a static, axial electric field. A FEL utilizing a low energy electron beam and a wiggler magnet with a periodicity on the order of 1 cm would produce far infared (FIR) radiation with wavelengths on the order of a few hundred microns. The use of the FIR radiation as the pump field in a two-stage FEL is envisioned to obtain visible radiation with a low energy electron beam. A summary is provided regarding the theory and equations of motion for the EM-pumped FEL. The derived relations are applied to the second stage of such a two-stage FEL. The obtained equations have been incorporated into a computer code which has been used to calculate laser gain and energy conversion efficiency.

Hiddleston, H. R.↗
NASA NTRS2013

Dynamic Stability Analysis of Blunt Body Entry Vehicles Using Time-Lagged Aftbody Pitching Moments

This analysis defines an analytic model for the pitching motion of blunt bodies during atmospheric entry. The proposed model is independent of the pitch damping sum coefficient present in the standard formulation of the equations of motion describing pitch oscillations of a decelerating blunt body, instead using the principle of a time-lagged aftbody moment as the forcing function for oscillation divergence. Four parameters, all with intuitive physical relevance, are introduced to fully define the aftbody moment and the associated time delay. It is shown that the dynamic oscillation responses typical to blunt bodies can be produced using hysteresis of the aftbody moment in place of the pitch damping coefficient. The approach used in this investigation is shown to be useful in understanding the governing physical mechanisms for blunt body dynamic stability and in guiding vehicle and mission design requirements. A validation case study using simulated ballistic range test data is conducted. From this, parameter identification is carried out through the use of a least squares optimizing routine. Results show good agreement with the limited existing literature for the parameters identified, suggesting that the model proposed could be validated by an experimental ballistic range test series. The trajectories produced by the identified parameters were found to match closely those from the MER ballistic range tests for a wide array of initial conditions and can be identified with a reasonable number of ballistic range shots and computational effort.

Supersonic↗
NASA NTRS1959

A Generalized Hydrodynamic-Impact Theory for the Loads and Motions of Deeply Immersed Prismatic Bodies

A theory is derived for determining the loads and motions of a deeply immersed prismatic body. The method makes use of a two-dimensional water-mass variation and an aspect-ratio correction for three-dimensional flow. The equations of motion are generalized by using a mean value of the aspect-ratio correction and by assuming a variation of the two-dimensional water mass for the deeply immersed body. These equations lead to impact coefficients that depend on an approach parameter which, in turn, depends upon the initial trim and flight-path angles. Comparison of experiment with theory is shown at maximum load and maximum penetration for the flat-bottom (0 deg dead-rise angle) model with bean-loading coefficients from 36.5 to 133.7 over a wide range of initial conditions. A dead-rise angle correction is applied and maximum-load data are compared with theory for the case of a model with 300 dead-rise angle and beam-loading coefficients from 208 to 530.

Markey, Melvin F.↗
NASA NTRS1977

Aeroelastic stability of coupled flap-lag-torsional motion of helicopter rotor blades in forward flight

A set of coupled periodic nonlinear differential flap-lag-torsional equations of blade motion is described which can simulate a blade having a precone, twist, distributed torsion, root torsion, torque offset, blade-root offsets, and offsets among the elastic axis, the aerodynamic center, and the blade cross-sectional center of mass. It is noted that the aerodynamic loads derived for these equations are applicable to cases of both hover and forward flight. The aeroelastic stability of a hingeless helicopter blade is investigated by linearizing the nonlinear differential equations of motion about a time-dependent equilibrium position of the helicopter in forward flight, using propulsion and moment trim procedures. A comparison of the results with those obtained previously for coupled flap-lag-torsional boundaries in hover indicates that aeroelastic-stability margins are degraded due to forward flight.

Friedmann, P.↗
NASA NTRS1982

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Volume 2, Part 2: Appendixes B, C, D and E

The derivation of the equations is presented, the rate control algorithm described, and simulation methodologies summarized. A set of dynamics equations that can be used recursively to calculate forces and torques acting at the joints of an n link manipulator given the manipulator joint rates are derived. The equations are valid for any n link manipulator system with any kind of joints connected in any sequence. The equations of motion for the class of manipulators consisting of n rigid links interconnected by rotary joints are derived. A technique is outlined for reducing the system of equations to eliminate contraint torques. The linearized dynamics equations for an n link manipulator system are derived. The general n link linearized equations are then applied to a two link configuration. The coordinated rate control algorithm used to compute individual joint rates when given end effector rates is described. A short discussion of simulation methodologies is presented.

Lowrie, J. W.↗
NASA NTRS1988

Coupled bending-torsion steady-state response of pretwisted, nonuniform rotating beams using a transfer-matrix method

Using the Newtonian method, the equations of motion are developed for the coupled bending-torsion steady-state response of beams rotating at constant angular velocity in a fixed plane. The resulting equations are valid to first order strain-displacement relationships for a long beam with all other nonlinear terms retained. In addition, the equations are valid for beams with the mass centroidal axis offset (eccentric) from the elastic axis, nonuniform mass and section properties, and variable twist. The solution of these coupled, nonlinear, nonhomogeneous, differential equations is obtained by modifying a Hunter linear second-order transfer-matrix solution procedure to solve the nonlinear differential equations and programming the solution for a desk-top personal computer. The modified transfer-matrix method was verified by comparing the solution for a rotating beam with a geometric, nonlinear, finite-element computer code solution; and for a simple rotating beam problem, the modified method demonstrated a significant advantage over the finite-element solution in accuracy, ease of solution, and actual computer processing time required to effect a solution.

Gray, Carl E., Jr.↗