Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Splashing Droplets

Current data on droplet breakup is scarce for the sizes and velocities typical of practical applications such as in spray combustion processes and coating processes. While much more representative of practical applications, the small spatial scales and rapid time-scales prevent detailed measurement of the internal fluid dynamics and liquid property gradients produced by impinging upon surfaces. Realized through the extended spatial and temporal scales afforded by a microgravity environment, an improved understanding of drop breakup dynamics is sought to understand and ultimately control the impingement dynamics of droplets upon surfaces in practical situations. The primary objective of this research will be to mark the onset of different 'splashing modes' and to determine their temperature, pressure and angle dependence for impinging droplets representative of practical fluids. In addition, we are modeling the evolution of droplets that do not initially splash but rather undergo a 'fingering' evolution observed on the spreading fluid front and the transformation of these fingers into splashed products. An example of our experimental data is presented below. These images are of Isopar V impacting a mirror-polished surface. They were acquired using a high-speed camera at 1000 frames per second. They show the spreading of a single droplet after impact and ensuing finger instabilities. Normal gravity experimental data such as this will guide low gravity measurements in the 2.2 second drop tower and KC-135 aircraft as available. Presently we are in the process of comparing the experimental data of droplet shape evolution to numerical models, which can also capture the internal fluid dynamics and liquid property gradients such as produced by impingement upon a heated surface. To-date isothermal numerical data has been modeled using direct numerical simulations of representative splashing droplets. The data obtained so far indicates that the present model describes well the droplet wall interactions to a point in time just before splash. Additional information is included in the original extended abstract.

VanderWal, Randall L.↗
DOE OSTI2019

Future physics opportunities for high-density QCD at the LHC with heavy-ion and proton beams

The future opportunities for high-density QCD studies with ion and proton beams at the LHC are presented. Four major scientific goals are identified: the characterisation of the macroscopic long wavelength Quark–Gluon Plasma (QGP) properties with unprecedented precision, the investigation of the microscopic parton dynamics underlying QGP properties, the development of a unified picture of particle production and QCD dynamics from small (pp) to large (nucleus–nucleus) systems, the exploration of parton densities in nuclei in a broad ($x, Q^2$) kinematic range and the search for the possible onset of parton saturation. In order to address these scientific goals, high-luminosity Pb–Pb and p–Pb programmes are considered as priorities for Runs 3 and 4, complemented by high-multiplicity studies in pp collisions and a short run with oxygen ions. High-luminosity runs with intermediate-mass nuclei, for example Ar or Kr, are considered as an appealing case for extending the heavy-ion programme at the LHC beyond Run 4. The potential of the High-Energy LHC to probe QCD matter with newly-available observables, at twice larger center-of-mass energies than the LHC, is investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Insights on the structure and properties of sodium iron phosphate glasses from molecular dynamics simulations

Iron phosphate glasses are promising nuclear waste forms while more detailed understanding of their structures and structure-property relations are still needed to better design waste glass compositions. In this work we report studies of three series of sodium iron phosphate (NFP) glasses: 60P 2 O 5 -(40-x)Fe 2 O 3 -xNa 2 O (x = 0→40), (100–2x)P 2 O 5 -xFe 2 O 3 -xNa 2 O (x = 5→17.5) and one with different iron redox ratio, to understand the composition as well as the iron redox effects on the structure and properties of these glasses using molecular dynamics simulations with effective two-body and three-body potentials. Structural analyses, including pair distribution function, bond angle distribution, Q n distribution, and polyhedral connectivity, were performed to obtain in-depth information on short-range and medium-range structural features. The P-O pair distributions showed a first peak splitting with phosphorus-bridging and non-bridging oxygen contributions. This and the average P-O and other cation-oxygen bond distances are in excellent agreement with experiments. The coordination number of P 5+ remained four while that of Fe 3+ increased from 4.30 to 4.72 with decreasing Fe/Na ratio. Polyhedral linkage analysis showed [PO 4 ] units linked with [PO 4 ] and [FeO x ] through corner-sharing while the [PO 4 ]-[FeO x ] linkages become dominant for compositions with Fe 2 O 3 larger than 15 mol%. The effect of iron redox ratio on the structure of NFP glasses was also studied and it was found that bond lengths and coordination numbers were not strongly affected, while the reduction of iron introduced higher network distortions, as evident by O-P-O bond angle and Q n distribution. The glass transition temperature (T g ) showed a monotonic increase with Fe 2 O 3 in the first series, in good agreement with experiments, while those of the second series showed a maximum at P 2 O 5 = 82 mol%. Here, calculated elastic moduli were found to increase with Fe 2 O 3 in the first glass series, which was be explained by the increase of network connectivity, while those of the second series decrease with Fe 2 O 3 due to decrease of P 2 O 5 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Calculation of the detonation state of HN 3 with quantum accuracy

HN 3 is a unique liquid energetic material that exhibits ultrafast detonation chemistry and a transition to metallic states during detonation. We combine the Chebyshev interaction model for efficient simulation (ChIMES) many-body reactive force field and the extended-Lagrangian multiscale shock technique molecular dynamics method to calculate the detonation properties of HN 3 with the accuracy of Kohn–Sham density-functional theory. ChIMES is based on a Chebyshev polynomial expansion and can accurately reproduce density-functional theory molecular dynamics (DFT-MD) simulations for a wide range of unreactive and decomposition conditions of liquid HN 3 . We show that addition of random displacement configurations and the energies of gas-phase equilibrium products in the training set allows ChIMES to efficiently explore the complex potential energy surface. Schemes for selecting force field parameters and the inclusion of stress tensor and energy data in the training set are examined. Structural and dynamical properties and chemistry predictions for the resulting models are benchmarked against DFT-MD. We demonstrate that the inclusion of explicit four-body energy terms is necessary to capture the potential energy surface across a wide range of conditions. Our results generally retain the accuracy of DFT-MD while yielding a high degree of computational efficiency, allowing simulations to approach orders of magnitude larger time and spatial scales. The techniques and recipes for MD model creation we present allow for direct simulation of nanosecond shock compression experiments and calculation of the detonation properties of materials with the accuracy of Kohn–Sham density-functional theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2013

Dependence of Dynamic Modeling Accuracy on Sensor Measurements, Mass Properties, and Aircraft Geometry

The NASA Generic Transport Model (GTM) nonlinear simulation was used to investigate the effects of errors in sensor measurements, mass properties, and aircraft geometry on the accuracy of identified parameters in mathematical models describing the flight dynamics and determined from flight data. Measurements from a typical flight condition and system identification maneuver were systematically and progressively deteriorated by introducing noise, resolution errors, and bias errors. The data were then used to estimate nondimensional stability and control derivatives within a Monte Carlo simulation. Based on these results, recommendations are provided for maximum allowable errors in sensor measurements, mass properties, and aircraft geometry to achieve desired levels of dynamic modeling accuracy. Results using additional flight conditions and parameter estimation methods, as well as a nonlinear flight simulation of the General Dynamics F-16 aircraft, were compared with these recommendations

Grauer, Jared A.↗
NASA NTRS2018

Molecular Dynamics of ULTEM 9085 for 3D Manufacturing: Spectra, Thermodynamic Properties, and Shear Viscosity.

We present results of a molecular dynamic analysis of welding at the polymer-polymer interface. The analysis is performed for polyetherimide/ polycarbonate polymer blends. The work is motivated by the applications to 3D manufacturing in space. In the first part of the report, we discuss bulk and spectral characteristics of the amorphous polymer blends. The vibrational and infra-red spectra obtained using auto-correlation functions calculations in molecular dynamics are compared with the experimental spectra. The mechanical and thermal properties of the samples including heat capacity, bulk modulus, and thermal expansion coefficients are estimated and compared with experimental values. In the second part of the report, we discuss the result of molecular dynamical modeling of shear viscosity in a fully atomistic model of amorphous polymer blends with flat interface. The key result of the research is the demonstration of shear thinning behavior of the shear viscosity as a function of shear rate which is in good agreement with experimental data.

Luchinsky, Dmitry G.↗
DOE OSTI2018

Effect of magnetic fields on the methyl rotation in a paramagnetic cobalt( ii ) complex. Quasielastic neutron scattering studies

Molecular dynamics is a fundamental property of metal complexes. These dynamic processes, especially for paramagnetic complexes under external magnetic fields, are in general not well understood. Quasielastic neutron scattering (QENS) in 0–4 T magnetic fields has been used to study the dynamics of Co(acac) 2 (D 2 O) 2 (1- d 4 , acac = acetylacetonate). At 80–100 K, rotation of the methyl groups on the acac ligands is the dominant dynamical process. This rotation is slowed down by the magnetic field increase. Rotation times at 80 K are 5.6(3) × 10 –10 s at 0 T and 2.04(10) × 10 –9 s at 4 T. The QENS studies suggest that methyl groups in these paramagnetic Co(II) molecules do not behave as isolated units, which is consistent with results from earlier magnetic susceptibility studies indicating the presence of intermolecular interactions. DFT calculations show that unpaired electron spin density in 1 is dispersed to the atoms of both acac and H 2 O ligands. Methyl torsions in 1- d 4 have also been observed at 5–100 K in inelastic neutron spectroscopy (INS). In conclusion, the QENS and INS results here help understand the dynamics of the compound in the solid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Characterizing the Small-Scale Dynamical, Ice Microphysical, and Residual Aerosol Properties of Mid-Latitude Cold Clouds: A Pilot Study (Final Report)

Our understanding of cirrus clouds has been advancing rapidly due to improvements in measurements made inside clouds, computer cloud models, and laboratory experimentation. This advancement in knowledge has made it clear that cirrus are complicated systems where the intricate interactions among dynamic air motions, solar and terrestrial radiation, ice crystal growth, and water and air chemistry can substantially influence cirrus structure and evolution. Measurements made inside clouds have shown that cirrus crystals are often complex with shapes that are often unclassifiable, especially at small sizes. Laboratory measurements have revealed that the ice crystal surface is complex, even at small sizes. Recent laboratory and satellite studies show that this surface complexity modifies the radiative properties of cirrus clouds in important ways. Moreover, observations and computer cloud modeling work show that the larger and smaller scale properties of cirrus are sensitive to the interplay between small-scale air motions and the aerosol articles upon which cirrus ice crystals form. Taken together, these studies indicate that accurately accounting for the radiative properties of cirrus clouds requires knowing the air motions and aerosol properties that influence the number concentration and crystal size, along with an understanding of the surface properties of vapor grown ice. Although this prior work has been illuminating, there have been few studies that provide detailed shape and surface complexity measurements for the small ice crystals that often compose cirrus clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Molecular Dynamics Simulation of the Structure and Properties of CaO-SiO{sub 2}-CaF{sub 2} Slag Systems

As a fundamental slag system in metallurgical processes, the CaO-SiO{sub 2}-CaF{sub 2} system, its properties, and related microstructures are of critical importance. The effect of the binary basicity and addition of CaF{sub 2} on the structure and viscosity of CaO-SiO{sub 2}-CaF{sub 2} slag were investigated using molecular dynamics simulations and Fourier transform infrared spectrometry. The average bond lengths of Si-O, Ca-O, and O-O were 1.61, 2.31, and 2.61 Å, respectively, and the coordinate number of Si remained constant. O-Si-O maintained an angle of 109.2, which was considered to be unaffected by the basicity changes. With increasing basicity, the network connectivity degrees Q{sup 3} and Q{sup 4} decreased, and the microstructure of the melt was significantly simpler. The effect of CaF{sub 2} on the depolymerization of the network structure was not obvious, and CaF{sub 2} acted mainly as a diluent. The calculations showed that the viscosity decreased upon setting up a ratio of nonbridging oxygen over tetrahedrally coordinated atoms (NBO/T). A good linear relationship was confirmed between the viscosity of the molten slag and the NBO/T.

36 MATERIALS SCIENCE↗
NASA NTRS2023

Thermomechanical Property Prediction of Amorphous and Crystal PEKK via Molecular Dynamics

Traditionally, advanced aerospace composites have been manufactured using thermoset resins. However, recently, thermoplastics have been investigated for use in the manufacturing of composite materials due to their unique manufacturing characteristics. Thermoplastic resins can be reshaped and formed, along with the added benefit of being recyclable, which thermoset resin cannot. Thermoplastic materials undergo a crystallization process during manufacturing which affects the percent crystallinity of the material. The crystallization needs to be understood better to maximize the potential of thermoplastic resins. PEKK is a thermoplastic material with good chemical, thermal, and mechanical loading resistance. PEKK is also a material NASA is interested in for developing new bonded joint technology. The crystalline microstructure of PEKK is at the micrometer length scale, and it is of interest to model the effects of the crystallinity structure on PEKK’s bulk properties. Molecular dynamics (MD) is a simulation tool that allows for property-structure relationships between atomistic structure and nanometer-length portions of a material. This makes MD a useful tool for developing the structure-property relationship of PEKK. However, the micrometer length scale of PEKK’s crystal structure is too large for MD. Thus, a hybrid approach to modeling PEKK’s microstructure is proposed in this work where MD models are built of both the amorphous and crystalline phases of PEKK. The engineering material properties can be obtained using MD at the nanometer length scale. A micromechanics approach can then generate the micrometer length scale of the crystallinity and the effective properties can be homogenized. The objective of this paper is to show the MD model workflow and the MD-predicted properties of PEKK. The properties can then be homogenized with different crystalline percentages to build design graphs that can be used to tailor PEKK for specific composite applications.

poly ether ketone ketone↗
NASA NTRS2020

Hierarchical Coupling of Molecular Dynamics and Micromechanics to Predict the Elastic Properties of Three-Phase and Four-Phase Silicon Carbide Composites

The results obtained from previously conducted molecular dynamics analysis of silicon carbide (-SiC (6H, 4H, & 2H-SiC), -SiC (3C SiC)), silicon and boron nitride, were utilized as inputs in the MAC/GMC micromechanics software to model and evaluate the elastic properties of three-phase SiC/BN/SiC and four-phase SiC/BN/Si/SiC composites. This method of analysis eliminates the need for back-calculation of the apparent properties of the base constituents from the measured ceramic matrix composites properties. The multiscale models are validated against the available data in literature.

Aluko, Olanrewaju↗
DOE OSTI2022

Near-Surface Hydrology and Soil Properties Drive Heterogeneity in Permafrost Distribution, Vegetation Dynamics, and Carbon Cycling in a Sub-Arctic Watershed: Modeling Archive

This Modeling Archive is in support of a NGEE-Arctic publication: Shirley et al. (2022) “Near-Surface Hydrology and Soil Properties Drive Heterogeneity in Permafrost Distribution, Vegetation Dynamics, and Carbon Cycling in a Sub-Arctic Watershed". [DOI].The dataset contains outputs from the global sensitivity analysis (GSA) of the “ecosys” model as reported in Shirley et al. (2022). The study showed that discontinuous permafrost environments are characterized by complex feedback loops and strong spatial heterogeneity which is created by variability in near-surface hydrology and soil properties. Additionally, the study demonstrated that missing representation of sub-grid heterogeneity in terrestrial ecosystem models can lead to biased estimates of the high-latitude carbon budget. Included in this dataset are the factor values for each run in the GSA and the model outputs used in this study. Included are two *.csv data files and one *.pdf.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Consequences of Delayed Chain Retraction on the Rheology and Stretch Dynamics of Entangled Polymer Liquids under Continuous Nonlinear Shear Deformation

Here, we generalize our recent new ideas for the continuous startup shear rheology of entangled polymer liquids in the transient stress overshoot regime to formulate a theory for the full constitutive response and nonequilibrium dynamics over all time scales, deformation rates, and degrees of entanglement. The convective constraint release (CCR) idea that chain retraction locally triggers disentanglement in a shear-rate-dependent manner is significantly modified to be physically consistent with our nonclassical treatment of delayed retraction due to an entanglement grip force. A detailed numerical study of the predictions of the theory is presented for the full stress–strain response, scaling behavior of the stress overshoot and undershoot features, orientational stress, primitive path contour length dynamics, and nonequilibrium steady-state properties spanning the slow and fast nonlinear deformation regimes. For deformations slow enough there is little or no chain stretch, our results are qualitatively the same as in prior tube-based models. However, under fast deformation conditions, we make qualitatively new predictions for all rheological and dynamic properties that are not contained in any existing models. No-fit-parameter quantitative comparisons are made with experimental and simulation studies, and very good agreement is found; testable predictions are made. Finally, strong connections between properties (stress and degree of chain stretch) at the overshoot and in the steady state are found, which suggests common physics exists at the elastic–viscous crossover (stress overshoot) and for long time flow associated with a delayed onset of primitive path retraction and emergence of CCR.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effects of system size and cooling rate on the structure and properties of sodium borosilicate glasses from molecular dynamics simulations

We present that borosilicate glasses form an important glass forming system in both glass science and technologies. The structure and property changes of borosilicate glasses as a function of thermal history in terms of cooling rate during glass formation and simulation system sizes used in classical molecular dynamics (MD) simulation were investigated with recently developed composition dependent partial charge potentials. Short and medium range structural features such as boron coordination, Si and B Qn distributions, and ring size distributions were analyzed to elucidate the effects of cooling rate and simulation system size on these structure features and selected glass properties such as glass transition temperature, vibration density of states, and mechanical properties. Neutron structure factors, neutron broadened pair distribution functions, and vibrational density of states were calculated and compared with results from experiments as well as ab initio calculations to validate the structure models. The results clearly indicate that both cooling rate and system size play an important role on the structures of these glasses, mainly by affecting the 3B and 4B distributions and consequently properties of the glasses. It was also found that different structure features and properties converge at different sizes or cooling rates; thus convergence tests are needed in simulations of the borosilicate glasses depending on the targeted properties. Lastly, the results shed light on the complex thermal history dependence on structure and properties in borosilicate glasses and the protocols in MD simulations of these and other glass materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nanoscale Hybrid Electrolytes with Viscosity Controlled Using Ionic Stimulus for Electrochemical Energy Conversion and Storage

As renewable energy is rapidly integrated into the grid, the challenge has become storing intermittent renewable electricity. Technologies including flow batteries and CO 2 conversion to dense energy carriers are promising storage options for renewable electricity. To achieve this technological advancement, the development of next generation electrolyte materials that can increase the energy density of flow batteries and combine CO 2 capture and conversion is desired. Liquidlike nanoparticle organic hybrid materials (NOHMs) composed of an inorganic core with a tethered polymeric canopy (e.g., polyetheramine (HPE)) have a capability to bind chemical species of interest including CO 2 and redox-active species. In this study, the unique response of NOHM-I-HPE-based electrolytes to salt addition was investigated, including the effects on solution viscosity and structural configurations of the polymeric canopy, impacting transport behaviors. The addition of 0.1 M NaCl drastically lowered the viscosity of NOHM-based electrolytes by up to 90%, reduced the hydrodynamic diameter of NOHM-I-HPE, and increased its self-diffusion coefficient, while the ionic strength did not alter the behaviors of untethered HPE. This study is the first to fundamentally discern the changes in polymer configurations of NOHMs induced by salt addition and provides a comprehensive understanding of the effect of ionic stimulus on their bulk transport properties and local dynamics. These insights could be ultimately employed to tailor transport properties for a range of electrochemical applications.

25 ENERGY STORAGE↗
DOE OSTI2019

Emergent Subpopulation Behavior Uncovered with a Community Dynamic Metabolic Model of Escherichia coli Diauxic Growth

ABSTRACT Microbes have adapted to greatly variable environments in order to survive both short-term perturbations and permanent changes. A classical and yet still actively studied example of adaptation to dynamic environments is the diauxic shift of Escherichia coli , in which cells grow on glucose until its exhaustion and then transition to using previously secreted acetate. Here we tested different hypotheses concerning the nature of this transition by using dynamic metabolic modeling. To reach this goal, we developed an open source modeling framework integrating dynamic models (ordinary differential equation systems) with structural models (metabolic networks) which can take into account the behavior of multiple subpopulations and smooth flux transitions between time points. We used this framework to model the diauxic shift, first with a single E. coli model whose metabolic state represents the overall population average and then with a community of two subpopulations, each growing exclusively on one carbon source (glucose or acetate). After introduction of an environment-dependent transition function that determined the balance between subpopulations, our model generated predictions that are in strong agreement with published data. Our results thus support recent experimental evidence that diauxie, rather than a coordinated metabolic shift, would be the emergent pattern of individual cells differentiating for optimal growth on different substrates. This work offers a new perspective on the use of dynamic metabolic modeling to investigate population heterogeneity dynamics. The proposed approach can easily be applied to other biological systems composed of metabolically distinct, interconverting subpopulations and could be extended to include single-cell-level stochasticity. IMPORTANCE Escherichia coli diauxie is a fundamental example of metabolic adaptation, a phenomenon that is not yet completely understood. Further insight into this process can be achieved by integrating experimental and computational modeling methods. We present a dynamic metabolic modeling approach that captures diauxie as an emergent property of subpopulation dynamics in E. coli monocultures. Without fine-tuning the parameters of the E. coli core metabolic model, we achieved good agreement with published data. Our results suggest that single-organism metabolic models can only approximate the average metabolic state of a population, therefore offering a new perspective on the use of such modeling approaches. The open source modeling framework that we provide can be applied to model general subpopulation systems in more-complex environments and can be extended to include single-cell-level stochasticity.

59 BASIC BIOLOGICAL SCIENCES↗