SEARCH · Engineering Papers

Results for “Correlation coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Solid impingement erosion mechanisms and characterization of erosion resistance of ductile metals

Experimental results pertaining to spherical glass bead and angular crushed glass particle impingement are presented. A concept of energy adsorption to explain the failure of material is proposed. The erosion characteristics of several pure metals were correlated with the proposed energy parameters and with other properties. Correlations of erosion and material properties were also carried out with these materials to study the effect of the angle of impingement. Analyses of extensive erosion data indicate that surface energy, strain energy, melting point, bulk modulus, hardness, ultimate resilience, atomic volume and product of linear coefficient of thermal expansion, bulk modulus, and temperature rise required for melting, and ultimate resilience, and hardness exhibit the best correlations. It appears that both energy and thermal properties contribute to the total erosion.

Rao, V. P.↗

NASA NTRS1975

Solar and atmospheric effects on satellite imagery derived from aircraft reflectance measurements

Solar and atmospheric effects on satellite imagery were investigated by measuring terrain reflectance from low-flying aircraft. Radiometric data were recorded over three test sites in California, Georgia, and South Dakota. Radiance from Skylab (EREP) S190A and ERTS-1 (Landsat-1) sensors was linearly correlated with wide-band terrain reflectance. The results support the proposition that the coefficients of the regression equation are the path radiance and a quantity representing the product of total irradiance and beam transmittance at the time of satellite overflight. These coefficients should be useful as linear conversion coefficients for extending spectral signatures in computer-aided classification work on satellite imagery.

Dana, R. W.↗

NASA NTRS1981

Development of high-speed balancing technology

An investigation into laser material removal showed that laser burns act in a manner typical of mechanical stress raisers causing a reduction in fatigue strength; the fatigue strength is lowered relative to the smooth specimen fatigue strength. Laser-burn zones were studied for four materials: Alloy Steel 4340, Stainless Steel 17-4 PH, Inconel 718, and Aluminum Alloy 6061-T6. Calculations were made of stress concentration factors K, for laser-burn grooves of each material type. A comparison was then made to experimentally determine the fatigue strength reduction factor. These calculations and comparisons indicated that, except for the 17-4 PH material, good agreement (a ratio of close to 1.0) existed between Kt and Kf. The performance of the 17-4 PH material has been attributed to early crack initiation due to the lower fatigue resistance of the soft, unaged laser-affected zone. Also covered in this report is the development, implementation, and testing of an influence coefficient approach to balancing a long, slender shaft under applied-torque conditions. Excellent correlation existed between the analytically predicted results and those data obtained from testing.

Demuth, R.↗

NASA NTRS1986

Lidar observations of the decline of the El Chichon stratospheric load

The eruption of the Mexican volcano El Chichon in Apr. 1982 enhanced the stratospheric aerosol load to a level which so far has not been observed by remote sensing techniques. The ruby lidar system at Garmisch-Partenkirchen recorded an increase of about two orders of magnitude above the background level of the years 1977/78. At northern midlatitudes backscattering was peaking in Jan./Feb. 1983, as illustrated. The decline of the El Chichon stratospheric perturbation is discussed. The decay of the El Chichon stratospheric cloud is characterized by an overall 1/e lifetime of about 12 months. The El Chichon decay is further characterized by seasonal variations of the integral backscattering coefficient, which exhibit a winter maximum and a summer minimum. These variations are inversely correlated with the seasonal mean movement of the tropopause height indicating transport processes.

Jaeger, H.↗

NASA NTRS1987

Soil moisture estimation using GOES-VISSR infrared data - A case study with a simple statistical method

Five days of clear sky observations of Kansas and Nebraska are used to examine the statistical relationship between soil moisture and infrared surface temperature observations taken from a geosynchronous satellite. Linear regression is used to relate soil moisture to surface temperature and other variables that represent wind speed, vegetation cover, and low-level temperature advection. Results show good agreement between estimated and observed soil moisture features on each of the 5 days. The average coefficient of determination for five pseudoindependent tests in which the test day is held out of the regression is 0.71. It is shown that a depletion coefficient of 0.92, when used to compute antecedent precipitation index (API), produces the best correlation between API and soil moisture as inferred from GOES thermal infrared data. By averaging daily predicted values over the 5-day rain-free case study period, 92 percent of the variance of the morning surface temperature change is explained by a simple multiple linear regression with all independent variables, or, alternatively, 85 percent of the observed variance in API is explained. It is concluded that this approach can distinguish at least four classes of soil wetness, but the necessity for measurement of surface advection may limit its usefulness in remote areas.

Wetzel, Peter J.↗

NASA NTRS1991

Infrared radiative energy transfer in gaseous systems

Analyses and numerical procedures are presented to investigate the radiative interactions in various energy transfer processes in gaseous systems. Both gray and non-gray radiative formulations for absorption and emission by molecular gases are presented. The gray gas formulations are based on the Planck mean absorption coefficient and the non-gray formulations are based on the wide band model correlations for molecular absorption. Various relations for the radiative flux and divergence of radiative flux are developed. These are useful for different flow conditions and physical problems. Specific plans for obtaining extensive results for different cases are presented. The procedure developed was applied to several realistic problems. Results of selected studies are presented.

Tiwari, Surendra N.↗

NASA NTRS1990

Further two-dimensional code development for Stirling space engine components

The development of multidimensional models of Stirling engine components is described. Two-dimensional parallel plate models of an engine regenerator and a cooler were used to study heat transfer under conditions of laminar, incompressible oscillating flow. Substantial differences in the nature of the temperature variations in time over the cycle were observed for the cooler as contrasted with the regenerator. When the two-dimensional cooler model was used to calculate a heat transfer coefficient, it yields a very different result from that calculated using steady-flow correlations. Simulation results for the regenerator and the cooler are presented.

Ibrahim, Mounir↗

NASA NTRS1993

Preliminary analysis of the sensitivity of AIRSAR images to soil moisture variations

Synthetic Aperture Radar (SAR) images acquired from various sources such as Shuttle Imaging Radar B (SIR-B) and airborne SAR (AIRSAR) have been analyzed for signatures of soil moisture. The SIR-B measurements have shown a strong correlation between measurements of surface soil moisture (0-5 cm) and the radar backscattering coefficient sigma(sup o). The AIRSAR measurements, however, indicated a lower sensitivity. In this study, an attempt has been made to investigate the causes for this reduced sensitivity.

Pardipuram, Rajan↗

NASA NTRS1995

Features of the solar background velocity field

The scaling properties of a time series of Doppler images obtained in good visibility conditions are studied. A 28 cm vacuum telescope and a vacuum spectroheliograph in video spectra-spectroheliograph mode, are used. Sixty line-of-sight Doppler images of an area of the quiet sun are investigated. They were taken at 60 sec intervals over a one hour span and have a 2 arcsec resolution. After the removal of the five-minute oscillations, the time-spatial spectrum is calculated. To study the turbulence of photospheric flows, two scaling parameters in the spectra, are estimated: the exponent of the spatial part of the power spectrum, and the exponent governing the scaling of time correlations. The implied diffusive behavior is discussed. This includes the estimation of a diffusion coefficient and the type of diffusion involved.

Ruzmaikin, Alexander↗

NASA NTRS1999

Measurements and Diagnostics of Diamond Films and Coatings

The commercial potential of chemical-vapor-deposited (CVD) diamond films has been established and a number of applications have been identified through university, industry, and government research studies. This paper discusses the methodologies used for property measurement and diagnostic of CVD diamond films and coatings. Measurement and diagnostic techniques studied include scanning electron microscopy, transmission electron microscopy, atomic force microscopy, stylus profilometry, x-ray diffraction, electron diffraction, Raman spectroscopy, Rutherford backscattering, elastic recoil spectroscopy, and friction examination. Each measurement and diagnostic technique provides unique information. A combination of techniques can provide the technical information required to understand the quality and properties of CVD diamond films, which are important to their application in specific component systems and environments. In this study the combination of measurement and diagnostic techniques was successfully applied to correlate deposition parameters and resultant diamond film composition, crystallinity, grain size, surface roughness, and coefficient of friction.

Miyoshi, Kazuhisa↗

NASA NTRSDate not supplied

Modeling of Cryogenic Heated-Tube Flow Boiling Experiments of Hydrogen and Helium With GFSSP

Accurate modeling of cryogenic boiling heat transfer is vital for the development of extended-duration space missions. Such missions may require the transfer of cryogenic propellants from in-space storage depots or the cooling of nuclear reactors. Purdue University in collaboration with NASA has assembled a database of cryogenic flow boiling data points from heated-tube experiments dating back to 1959, which has been used to develop new flow boiling correlations specifically for cryogens. Computational models of several of these experiments have been constructed in the Generalized Fluid System Simulation Program (GFSSP), a network flow code developed at NASA’s Marshall Space Flight Center. The new Purdue-developed correlations cover the full boiling curve: onset of nucleate boiling, nucleate boiling, critical heat flux, and film boiling. These correlations have been coded into GFSSP user subroutines. The fluids modeled are hydrogen and helium. Predictions of wall temperature, heat transfer coefficient, and pressure drop are presented and compared to the test data.

multi-phase flow↗

NASA NTRS1981

Space Shuttle main engine nozzle-steerhorn dynamics

On two occasions during the Space Shuttle main engine development, the LH2 feedline (called the steerhorn, because of its shape) failed during the cutoff transient. A dynamic test was undertaken, and an analytical model was developed and correlated to the dynamic test. Detailed models of the tube bundle were required to obtain the equivalent shell coefficients. All-shell models of the nozzle wall were found better than beam-shell models. The most difficult part of the structure to simulate was the felt-metal pad between the feedline and its mount, which introduced nonlinear stiffness and damping and led to the use of separate low amplitude and high amplitude models. The total structure was found to have 400 modes in the frequency range of interest, 0 to 500 Hz. Good test analysis correlation was obtained and a modified feedline configuration was found to demonstrate a 40% reduction of response stress from the original configuration.

Kiefling, L.↗

NASA NTRS1969

Correlations for stagnation-point radiative heat transfer.

Correlations of stagnation point radiative heat transfer for earth reentry, noting use of nongray absorption coefficient models

Olstad, W. B.↗

NASA NTRS1972

Vibration characteristics of unidirectional filamentary composite material panels.

An experimental and analytical study of the vibration characteristics of a series of boron/epoxy composite panels with all layers having the same filament orientation has been conducted. Nodal patterns and natural frequencies are found to be highly dependent on the filament angle. Frequencies change by as much as 90 per cent with a 30-deg change in the filament angle. Measured damping coefficients are only moderately higher than those of comparative aluminum panels. There is no strong correlation between the filament angle and the amount of damping. In general, calculations based on a finite element mathematical model are in good agreement with the experimental data.

Clary, R. R.↗

NASA NTRS1972

Serial segment method for measuring remnant

For tracking tasks where a sum of sine waves forcing function is used it is often difficult and/or expensive to obtain the pilot's remnant in the vicinity of the sine waves. For the case where each sine wave has at least four times an integer number of cycle per run length, this paper illustrates the serial segments method for measuring remnant power spectral density in a frequency band centered on each sine wave. This method can be implemented on digital, hybrid, or analog Fourier coefficient analyzers, and is particularly advantageous on the latter since properties of Fourier coefficients are exploited to yield both a remnant measure and an improved estimate of the correlated component.

Magdaleno, R. E.↗

NASA NTRS1987

Correlation of SA349/2 helicopter flight-test data with a comprehensive rotorcraft model

A comprehensive rotorcraft analysis model was used to predict blade aerodynamic and structural loads for comparison with flight test data. The data were obtained from an SA349/2 helicopter with an advanced geometry rotor. Sensitivity of the correlation to wake geometry, blade dynamics, and blade aerodynamic effects was investigated. Blade chordwise pressure coefficients were predicted for the blade transonic regimes using the model coupled with two finite-difference codes.

Yamauchi, Gloria K.↗

NASA NTRS1986

Numerical simulation of diffusion-controlled droplet growth Dynamical correlation effects

Diffusion-controlled coarsening (Ostwald ripening) of precipitated solutions is studied by numerical simulation. An algorithm is devised which exploits the screening of solute concentration fields, thereby removing the restriction to small systems of previous work. Simulation of the coarsening of 5000 droplets at 10-percent volume fraction reveals long-ranged dynamical correlations which broaden the droplet size-distribution function and increase the coarsening-rate coefficient.

Beenakker, C. W. J.↗

NASA NTRS1986

Correlation of SA349/2 helicopter flight-test data with a comprehensive rotorcraft model

Yamauchi, Gloria K.↗