Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Collective motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Hazard Perception & Avoidance (HPA), Assured Vehicle Automation 1 Simulation (AVA-1h) Results Outbrief

In late 2022, the Human Autonomy Teaming Lab (NASA Ames Research Center) conducted a manned, human-in-the-loop (HITL) simulation. This HITL was the lab’s second Hazard Perception and Avoidance (HPA) technical work under NASA’s Advanced Air Mobility (AAM), Automated Flight and Contingency Management (AFCM) Sub-Project. The goals were to assess detect and avoid technology for manned, electric vertical takeoff and landing (eVTOL) aircraft. This simulation tested Resolution Advisory (RA) responses and return-to-course (RTC) maneuvers for the second version of the Airborne Collision Avoidance System’s (ACAS) rotary-wing (Xr) variant. This was conducted at the center's Vertical Motion Simulator (VMS), on a motion-based platform, and was configured to fly eVTOL aircraft while maneuvering for intruding traffic. Variables for this study included ACAS Xr modes (i.e., TA/RA and DAA) and phases of flight (i.e., Cruise, Hover, and Approach). The data collected included response times, losses of well clear, and pilots' noncompliances to alerts and guidance as well as subjective ratings like acceptability and perceived workload. Additional details and future anticipations are also discussed.

ACAS Xr↗

Proton Conduction in Exchange Membranes across Multiple Length Scales

Concerns over global climate change associated with fossil-fuel consumption continue to drive the development of electrochemical alternatives for energy technology. Proton exchange fuel cells are a particularly promising technology for stationary power generation, mobile electronics, and hybrid engines in automobiles. For these devices to work efficiently, direct electrical contacts between the anode and cathode must be avoided; hence, the separator material must be electronically insulating but highly proton conductive. As a result, researchers have examined a variety of polymer electrolyte materials for use as membranes in these systems. In the optimization of the membrane, researchers are seeking high proton conductivity, low electronic conduction, and mechanical stability with the inclusion of water in the polymer matrix. A considerable number of potential polymer backbone and side chain combinations have been synthesized to meet these requirements, and computational studies can assist in the challenge of designing the next generation of technologically relevant membranes. Such studies can also be integrated in a feedback loop with experiment to improve fuel cell performance. However, to accurately simulate the currently favored class of membranes, perfluorosulfonic acid containing moieties, several difficulties must be addressed including a proper treatment of the proton-hopping mechanism through the membrane and the formation of nanophase-separated water networks. We discuss our recent efforts to address these difficulties using methods that push the limits of computer simulation and expand on previous theoretical developments. We describe recent advances in the multistate empirical valence bond (MS-EVB) method that can probe proton diffusion at the nanometer-length scale and accurately model the so-called Grotthuss shuttling mechanism for proton diffusion in water. Using both classical molecular dynamics and coarse-grained descriptions that replace atomistic representations with collective coordinates, we investigated the proton conductivity of polymer membrane structure as a function of hydration level. Nanometer-sized water channels form torturous pathways that are traversed by the charges during fuel cell operation. Using a combination of coarse-grained membrane structure and novel multiscale methods, we demonstrate emerging approaches to treat proton motion at the mesoscale in these complex materials.

Jorn, Ryan↗

Mars Science Laboratory Drill

This drill (see Figure 1) is the primary sample acquisition element of the Mars Science Laboratory (MSL) that collects powdered samples from various types of rock (from clays to massive basalts) at depths up to 50 mm below the surface. A rotary-percussive sample acquisition device was developed with an emphasis on toughness and robustness to handle the harsh environment on Mars. It is the first rover-based sample acquisition device to be flight-qualified (see Figure 2). This drill features an autonomous tool change-out on a mobile robot, and novel voice-coil-based percussion. The drill comprises seven subelements. Starting at the end of the drill, there is a bit assembly that cuts the rock and collects the sample. Supporting the bit is a subassembly comprising a chuck mechanism to engage and release the new and worn bits, respectively, and a spindle mechanism to rotate the bit. Just aft of that is a percussion mechanism, which generates hammer blows to break the rock and create the dynamic environment used to flow the powdered sample. These components are mounted to a translation mechanism, which provides linear motion and senses weight-on-bit with a force sensor. There is a passive-contact sensor/stabilizer mechanism that secures the drill fs position on the rock surface, and flex harness management hardware to provide the power and signals to the translating components. The drill housing serves as the primary structure of the turret, to which the additional tools and instruments are attached. The drill bit assembly (DBA) is a passive device that is rotated and hammered in order to cut rock (i.e. science targets) and collect the cuttings (powder) in a sample chamber until ready for transfer to the CHIMRA (Collection and Handling for Interior Martian Rock Analysis). The DBA consists of a 5/8-in. (.1.6- cm) commercial hammer drill bit whose shank has been turned down and machined with deep flutes designed for aggressive cutting removal. Surrounding the shank of the bit is a thick-walled maraging steel collection tube allowing the powdered sample to be augured up the hole into the sample chamber. For robustness, the wall thickness of the DBA was maximized while still ensuring effective sample collection. There are four recesses in the bit tube that are used to retain the fresh bits in their bit box. The rotating bit is supported by a back-to-back duplex bearing pair within a housing that is connected to the outer DBA housing by two titanium diaphragms. The only bearings on the drill in the sample flow are protected by a spring-energized seal, and an integrated shield that diverts the ingested powdered sample from the moving interface. The DBA diaphragms provide radial constraint of the rotating bit and form the sample chambers. Between the diaphragms there is a sample exit tube from which the sample is transferred to the CHIMRA. To ensure that the entire collected sample is retained, no matter the orientation of the drill with respect to gravity during sampling, the pass-through from the forward to the aft chamber resides opposite to the exit tube.

Okon, Avi B.↗

Effects of discrete-source outgassing on motions of periodic comets and discontinuous orbital anomalies

Isoline maps of the Style II nongravitational parameters A1 and A2 of periodic comets are presented for a baseline model as functions of the parameters of the inertially fixed spin vector and the source's location-dependent thrust angle. The parameters A1 and A2 for a collection of sources are equal to the sum of their values for the individual contributors, thus depending on the source distribution. The model is consistent with even the most extreme among detected perturbations, including instances of rapid temporal changes in A2 and the discontinuous orbital anomalies, which are interpreted as products of a sudden redistribution of the transferred momentum due to episodic activation of short-lived sources. It is argued that the lifetimes of active regions vary considerably from case to case, and forced precession of the nucleus strongly influences the comet's activity pattern.

Sekanina, Zdenek↗

Motion Tracking Of A Handheld Scanner With An Infrared Vision System

Handheld scanners are used in a large number of applications to inspect walls, floors, tanks, and other large structures. Measurements are made to characterize physical properties, uncover defects, detect evidence of tampering, quantify surface contamination, and so forth. Handheld scanning suffers from a number of drawbacks. The relationship between the data collected and scanned location is difficult or impossible to track. Humans using handheld scanners can unintentionally scan the same area multiple times or entirely overlook an area of interest. An automated scanner tracking system could improve upon current inspection practices with a handheld scanner in terms of efficiency, accuracy, and quality. The authors have developed a handheld scanner tracking system that will allow users to visualize previously scanned areas, highlight areas where important or unusual data are acquired, and store scanning location with acquired data. The scanned regions are saved in real time and projected back on the scanned area using a projector. The system currently utilizes the Smoothboard software, which has already been designed to interpret the location of a captured infrared source from a Wii Remote controller to create an interactive whiteboard. This software takes advantage of the Wii Remote’s ability to track the location of an infrared source, and when proper calibration of the Wii Remote orientation is complete, any surface can become a virtual whiteboard. In addition to recording and projecting scan pathways, the system developed by the authors can be used to make notes on the scanning process and project acquired data on top of the scanned area. This latter capability can be used to guide sample acquisition or demolition activities. This paper discusses development of the system and potential benefits to wall scanning with handheld scanners.

Wii Remote, Wall scanner, IR tracking, Motion Trac↗

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗

Quantification of Esophageal Tumor Motion on Cine-Magnetic Resonance Imaging

Purpose: To quantify the movement of esophageal tumors noninvasively on cine-magnetic resonance imaging (MRI) by use of a semiautomatic method to visualize tumor movement directly throughout multiple breathing cycles. Methods and Materials: Thirty-six patients with esophageal tumors underwent MRI. Tumors were located in the upper (8), middle (7), and lower (21) esophagus. Cine-MR images were collected in the coronal and sagittal plane during 60 seconds at a rate of 2 Hz. An adaptive correlation filter was used to automatically track a previously marked reference point. Tumor movement was measured in the craniocaudal (CC), left–right (LR), and anteroposterior (AP) directions and its relationship along the longitudinal axis of the esophagus was investigated. Results: Tumor registration within the individual images was typically done at a millisecond time scale. The mean (SD) peak-to-peak displacements in the CC, AP, and LR directions were 13.3 (5.2) mm, 4.9 (2.5) mm, and 2.7 (1.2) mm, respectively. The bandwidth to cover 95% of excursions from the mean position (c95) was also calculated to exclude outliers caused by sporadic movements. The mean (SD) c95 values were 10.1 (3.8) mm, 3.7 (1.9) mm, and 2.0 (0.9) mm in the CC, AP, and LR dimensions. The end-exhale phase provided a stable position in the respiratory cycle, compared with more variety in the end-inhale phase. Furthermore, lower tumors showed more movement than did higher tumors in the CC and AP directions. Conclusions: Intrafraction tumor movement was highly variable between patients. Tumor position proved the most stable during the respiratory cycle in the end-exhale phase. A better understanding of tumor motion makes it possible to individualize radiation delivery strategies accordingly. Cine-MRI is a successful noninvasive modality to analyze motion for this purpose in the future.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quantum quenches of an SO(5) pseudospin reveal Higgs bosons

A controlled dynamical probe measurement of complex order parameter fluctuations of a system may reveal its massive collective excitations. Here, we design dynamical quench protocols to excite independently all ten midgap Higgs bosons in the isotropic Balian-Werthamer state of a spinful p -wave superfluid or superconductor. The analysis is based on microscopic equations of motion of an SO(5) pseudospin, an extension of the usual Bloch equation to a five-dimensional space. Key to these protocols is the realization of quenches that break the rotational symmetry of the kinetic energy and exploit the irreducible representation of the angular momentum J = 2. For perturbative quenches, we find ( nondecaying ) periodic oscillations in time of these Higgs modes. Finally, we present experimental protocols for superconductors (superfluids), with the intention of unveiling the nature of their order parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Astrometric gravitational-wave detection via stellar interferometry

Here, we evaluate the potential for gravitational-wave (GW) detection in the frequency band from 10 nHz to 1 μ Hz using extremely high-precision astrometry of a small number of stars. In particular, we argue that nonmagnetic, photometrically stable, hot white dwarfs (WD) located at ~kpc distances may be optimal targets for this approach. Previous studies of astrometric GW detection have focused on the potential for less precise surveys of large numbers of stars; our work provides an alternative optimization approach to this problem. Interesting GW sources in this band are expected at characteristic strains around h c ~10 -17 × (μHz/ $f$ GW ). The astrometric angular precision required to see these sources is Δθ~h c after integrating for a time T~1/$f$GW. We show that jitter in the photometric center of WD of this type due to starspots is bounded to be small enough to permit this high-precision, small-N approach. We discuss possible noise arising from stellar reflex motion induced by orbiting objects and show how it can be mitigated. The only plausible technology able to achieve the requisite astrometric precision is a space-based stellar interferometer. Such a future mission with few-meter-scale collecting dishes and baselines of $\mathscr{O}$(100 km ) is sufficient to achieve the target precision. This collector size is broadly in line with the collectors proposed for some formation-flown, space-based astrometer or optical synthetic-aperture imaging-array concepts proposed for other science reasons. The proposed baseline is however somewhat larger than the km-scale baselines discussed for those concepts, but we see no fundamental technical obstacle to utilizing such baselines. A mission of this type thus also holds the promise of being one of the few ways to access interesting GW sources in this band.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Euler–Lagrange Simulations of Bubble Cloud Dynamics Near a Wall

We present in this paper a two-way coupled Eulerian–Lagrangian model to study the dynamics of clouds of microbubbles subjected to pressure variations and the resulting pressures on a nearby rigid wall. The model simulates the two-phase medium as a continuum and solves the Navier–Stokes equations using Eulerian grids with a time and space varying density. The microbubbles are modeled as interacting singularities representing moving and oscillating spherical bubbles, following a modified Rayleigh–Plesset–Keller–Herring equation and are tracked in a Lagrangian fashion. A two-way coupling between the Euler and Lagrange components is realized through the local mixture density determined by the bubbles' volume change and motion. Using this numerical framework, simulations involving a large number of bubbles were conducted under driving pressures at different frequencies. The results show that the frequency of the driving pressure is critical in determining the overall dynamics: either a collective strongly coupled cluster behavior or nonsynchronized weaker multiple bubble oscillations. The former creates extremely high pressures with peak values orders of magnitudes higher than that of the excitation pressure. This occurs when the driving frequency matches the natural frequency of the bubble cloud. The initial distance between the bubble cloud and the wall also affects significantly the resulting pressures. A bubble cloud collapsing very close to the wall exhibits a cascading collapse, with the bubbles farthest from the wall collapsing first and the nearest ones collapsing last, thus the energy accumulates and this results in very high pressure peaks at the wall. Finally, at farther cloud distances from the wall, the bubble cloud collapses quasi-spherically with the cloud center collapsing last.

42 ENGINEERING↗

Switching it up: New mechanisms revealed in wurtzite-type ferroelectrics

Wurtzite-type ferroelectrics have drawn increasing attention due to the promise of better performance and integration than traditional oxide ferroelectrics with semiconductors such as Si, SiC, and III-V compounds. However, wurtzite-type ferroelectrics generally require enormous electric fields, approaching breakdown, to reverse their polarization. The underlying switching mechanism(s), especially for multinary compounds and alloys, remains elusive. Here, we examine the switching behaviors in Al 1-x Sc x N alloys and wurtzite-type multinary candidate compounds we recently computationally identified. We find that switching in these tetrahedrally coordinated materials proceeds via a variety of nonpolar intermediate structures and that switching barriers are dominated by the more-electronegative cations. For Al 1-x Sc x N alloys, we find that the switching pathway changes from a collective mechanism to a lower-barrier mechanism enabled by inversion of individual tetrahedra with increased Sc composition. Our findings provide insights for future engineering and realization of wurtzite-type materials and open a door to understanding domain motion.

36 MATERIALS SCIENCE↗

Establishing a Near Term Lunar Farside Gravity Model via Inexpensive Add-on Navigation Payload

The Space Communications and Navigation, Constellation Integration Project (SCIP) is tasked with defining, developing, deploying and operating an evolving multi-decade communications and navigation (C/N) infrastructure including services and subsystems that will support both robotic and human exploration activities at the Moon. This paper discusses an early far side gravitational mapping service and related telecom subsystem that uses an existing spacecraft (WIND) and the Lunar Reconnaissance Orbiter (LRO) to collect data that would address several needs of the SCIP. An important aspect of such an endeavor is to vastly improve the current lunar gravity model while demonstrating the navigation and stationkeeping of a relay spacecraft. We describe a gravity data acquisition activity and the trajectory design of the relay orbit in an Earth-Moon L2 co-linear libration orbit. Several phases of the transfer from an Earth-Sun to the Earth-Moon region are discussed along with transfers within the Earth-Moon system. We describe a proposed, but not integrated, add-on to LRO scheduled to be launched in October of 2008. LRO provided a real host spacecraft against which we designed the science payload and mission activities. From a strategic standpoint, LRO was a very exciting first flight opportunity for gravity science data collection. Gravity Science data collection requires the use of one or more low altitude lunar polar orbiters. Variations in the lunar gravity field will cause measurable variations in the orbit of a low altitude lunar orbiter. The primary means to capture these induced motions is to monitor the Doppler shift of a radio signal to or from the low altitude spacecraft, given that the signal is referenced to a stable frequency reference. For the lunar far side, a secondary orbiting radio signal platform is required. We provide an in-depth look at link margins, trajectory design, and hardware implications. Our approach posed minimum risk to a host mission while maintaining a very low implementation and operations cost.

Folta, David↗

Characterization of Friction Joints Subjected to High Levels of Random Vibration

This paper describes the test program in detail including test sample description, test procedures, and vibration test results of multiple test samples. The material pairs used in the experiment were Aluminum-Aluminum, Aluminum- Dicronite coated Aluminum, and Aluminum-Plasmadize coated Aluminum. Levels of vibration for each set of twelve samples of each material pairing were gradually increased until all samples experienced substantial displacement. Data was collected on 1) acceleration in all three axes, 2) relative static displacement between vibration runs utilizing photogrammetry techniques, and 3) surface galling and contaminant generation. This data was used to estimate the values of static friction during random vibratory motion when "stick-slip" occurs and compare these to static friction coefficients measured before and after vibration testing.

aluminum↗

ISRU Pilot Excavator Wheel Testing in Lunar Regolith Simulant

The ISRU Pilot Excavator, or IPEx, is a robotic excavator funded by NASA’s Space Technology Mission Directorate (STMD). The Concept of Operations for IPEx involves the robot driving on the lunar surface up to 70 km at a speed of up to 30 cm/s. As such, it is critical to the mission’s success to optimize the design of the wheels for performance in lunar conditions, specifically in lunar regolith. To achieve this, an array of tests was completed to observe the effects of various wheel design choices on the driving performance of the wheels in lunar regolith simulant. In order to facilitate testing, we designed a 12” dia. configurable wheel to allow for interchangeability between various wheel formations. Two types of wheel parts were designed to be swapped: cleats, which form the tread of the wheel; and grousers, which protrude from the treads. The test variables that we considered were as follows: square vs. round wheel shape, solid vs. perforated cleats, cleat spacing, grouser height, and grouser spacing. By combining different settings of each of these test variables, ten discrete wheel designs were created and tested. The configurable test wheels were mounted on the Regolith Advanced Surface Systems Operations Robot (RASSOR) developed at NASA’s Kennedy Space Center. In our experiments, the robot was driven at a controlled speed across a prepared surface of BP-1 lunar regolith simulant. Four types of tests were conducted: circle driving, straight driving, slope driving, and drawbar pull. The driving tests were chosen to mimic a variety of conditions in which IPEx may be expected to operate, and the drawbar pull test was chosen to provide a standard of comparison with existing wheel design literature. The circle and straight driving tests were each performed at different levels: for the circle driving test, the robot was driven at a constant linear speed and three different angular speeds, while for the straight driving test, the robot was driven at three different linear speeds. The data collected from these tests included the power usage from each of the wheels, measurements of the tread patterns left in the regolith surface, and the amount of slip the wheels experienced, which was calculated using data from an OptiTrack motion capture system. From the results of these experiments, we found that certain test variables were more significant than others in determining performance for each type of test, and no single wheel design clearly outperformed the others in all areas. The details of our findings will be discussed further in this paper. This data will be utilized to inform the design of the wheels for IPEx and can provide a basis for the design of wheels for future lunar terrain vehicles.

RASSOR↗

Piezoelectric energy harvester having planform-tapered interdigitated beams

Embodiments of energy harvesters have a plurality of piezoelectric planform-tapered, interdigitated cantilevered beams anchored to a common frame. The plurality of beams can be arranged as two or more sets of beams with each set sharing a common sense mass affixed to their free ends. Each set thus defined being capable of motion independent of any other set of beams. Each beam can comprise a unimorph or bimorph piezoelectric configuration bonded to a conductive or non-conductive supporting layer and provided with electrical contacts to the active piezoelectric elements for collecting strain induced charge (i.e. energy). The beams are planform tapered along the entirety or a portion of their length thereby increasing the effective stress level and power output of each piezoelectric element, and are interdigitated by sets to increase the power output per unit volume of a harvester thus produced.

47 OTHER INSTRUMENTATION↗

Wide-Field Imaging Interferometry Spatial-Spectral Image Synthesis Algorithms

Developed is an algorithmic approach for wide field of view interferometric spatial-spectral image synthesis. The data collected from the interferometer consists of a set of double-Fourier image data cubes, one cube per baseline. These cubes are each three-dimensional consisting of arrays of two-dimensional detector counts versus delay line position. For each baseline a moving delay line allows collection of a large set of interferograms over the 2D wide field detector grid; one sampled interferogram per detector pixel per baseline. This aggregate set of interferograms, is algorithmically processed to construct a single spatial-spectral cube with angular resolution approaching the ratio of the wavelength to longest baseline. The wide field imaging is accomplished by insuring that the range of motion of the delay line encompasses the zero optical path difference fringe for each detector pixel in the desired field-of-view. Each baseline cube is incoherent relative to all other baseline cubes and thus has only phase information relative to itself. This lost phase information is recovered by having point, or otherwise known, sources within the field-of-view. The reference source phase is known and utilized as a constraint to recover the coherent phase relation between the baseline cubes and is key to the image synthesis. Described will be the mathematical formalism, with phase referencing and results will be shown using data collected from NASA/GSFC Wide-Field Imaging Interferometry Testbed (WIIT).

Lyon, Richard G.↗

Loading, electromyograph, and motion during exercise

A bicycle ergometer system has been developed to determine forces acting in specific muscles and muscle groups for both cycling and isometric exercise. The bicycle has been instrumented with encoders, accelerometers, and load cells. A harnessing system has been developed to keep subjects in place during isometric exercise. EMG data will also be collected with electrodes attached to various muscles on the subject's leg. Data has been collected for static loading and will be collected for cycling in both an earth-based laboratory and on the KC-135. Once the data is analyzed, the forces will be entered into finite element models of bones of the lower extremities. A finite element model of the tibia-fibula has been generated from the experimental subject's MRI data. The linear elastic isoparametric brick elements representing the bones are connected by linear elastic isoparametric shell elements placed at the locations of ligaments. Models will be generated for the calcaneus and the femur. Material properties for the various tissues will be taken from the literature. The experimentally determined muscle forces will be applied to the models to determine the stress distribution which is created in the bones.

Todd, Beth A.↗