Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Femtosecond measurements of near-infrared pulse induced mid-infrared transmission modulation of quantum cascade lasers

We temporally resolved the ultrafast mid-infrared transmission modulation of quantum cascade lasers (QCLs) using a near-infrared pump/mid-infrared probe technique at room temperature. Two different femtosecond wavelength pumps were used with photon energy above and below the quantum well (QW) bandgap. The shorter wavelength pump modulates the mid-infrared probe transmission through interband transition assisted mechanisms, resulting in a high transmission modulation depth and several nanoseconds recovery lifetime. In contrast, pumping with a photon energy below the QW bandgap induces a smaller transmission modulation depth but much faster (several picoseconds) recovery lifetime, attributed to intersubband transition assisted mechanisms. The latter ultrafast modulation (>60 GHz) could provide a potential way to realize fast QCL based free space optical communication.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Coupled-cavity terahertz quantum cascade lasers for single mode operation

We demonstrate the operation of coupled-cavity terahertz frequency quantum-cascade lasers composed of two sub-cavities separated by an air gap realized by optical lithography and dry etching. This geometry allows stable, single mode operation with typical side mode suppression ratios in the 30–40 dB range. We employ a transfer matrix method to model the mode selection mechanism. The obtained results are in good agreement with the measurements and allow prediction of the operating frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Near-infrared induced optical quenching effects on mid-infrared quantum cascade lasers

In space communications, atmospheric absorption and Rayleigh scattering are the dominant channel impairments. Transmission using mid-infrared (MIR) wavelengths offers the benefits of lower loss and less scintillation effects. In this work, we report the telecom wavelengths (1.55 μm and 1.3 μm) induced optical quenching effects on MIR quantum cascade lasers (QCLs), when QCLs are operated well above their thresholds. The QCL output power can be near 100% quenched using 20 mW of near-infrared (NIR) power, and the quenching effect depends on the input NIR intensity as well as wavelength. Time resolved measurement was conducted to explore the quenching mechanism. The measured recovery time is around 14 ns, which indicates that NIR generated electron-hole pairs may play a key role in the quenching process. The photocarrier created local field and band bending can effectively deteriorate the dipole transition matrix element and quench the QCL. As a result, MIR QCLs can be used as an optical modulator and switch controlled by NIR lasers. They can also be used as “converters” to convert telecom optical signals into MIR optical signals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

A widely tunable 10-μm quantum cascade laser phase-locked to a state-of-the-art mid-infrared reference for precision molecular spectroscopy

We report the coherent phase-locking of a quantum cascade laser (QCL) at 10-μm to the secondary frequency standard of this spectral region, a CO{sub 2} laser stabilized on a saturated absorption line of OsO{sub 4}. The stability and accuracy of the standard are transferred to the QCL resulting in a line width of the order of 10 Hz, and leading to the narrowest QCL to date. The locked QCL is then used to perform absorption spectroscopy spanning 6 GHz of NH{sub 3} and methyltrioxorhenium, two species of interest for applications in precision measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Multi-metastable states induced by the optical pump-probe process in terahertz quantum cascade lasers

The optical pump-probe process in terahertz quantum cascade lasers is studied theoretically by using the open system simulation method. The emitter injection is considered and the charge neutrality in the active region is broken. We find that nonequilibrium oscillations may appear in the recovery processes. In particular, the formation of different equilibrium values of the population change after the periodic pulse pumping is observed clearly. Here, the phenomenon of multi-metastable states stems from the electron regulation by the emitter injection. Finally, we discuss the important impacts of the equilibrium stabilization time and obtain an in-depth understanding of the emitter injection.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Importance of growth direction in mid-infrared quantum cascade lasers

We report on the effect of growth direction on the performance of mid-infrared Quantum Cascade lasers. The design used has a symmetric active core, capable of operating under both negative and positive polarities, which allows to test for residual growth asymmetries such as interface roughness and dopant migration. Calculations of scattering lifetimes from interface roughness and ionized impurities suggest a dominant contribution from the former, with devices biased positively averaging ∼15% larger broadening and ∼50% shorter upper state lifetime than negatively biased devices. Experimental results for positively biased devices show at least 30% larger broadening and 35% lower electroluminescence peak intensity than those biased negatively, in good agreement with the modeling results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

High operating temperature interband cascade focal plane arrays

In this paper, we report the initial demonstration of mid-infrared interband cascade (IC) photodetector focal plane arrays with multiple-stage/junction design. The merits of IC photodetectors include low noise and efficient photocarrier extraction, even for zero-bias operation. By adopting enhanced electron barrier design and a total absorber thickness of 0.7 μm, the 5-stage IC detectors show very low dark current (1.10 × 10{sup −7} A/cm{sup 2} at −5 mV and 150 K). Even with un-optimized fabrication and standard commercial (mis-matched) read-out circuit technology, infrared images are obtained by the 320 × 256 IC focal plane array up to 180 K with f/2.3 optics. The minimum noise equivalent temperature difference of 28 mK is obtained at 120 K. These initial results indicate great potential of IC photodetectors, particularly for high operating temperature applications.

36 MATERIALS SCIENCE↗
DOE OSTI2014

High detectivity short-wavelength II-VI quantum cascade detector

We report on the experimental demonstration of a ZnCdSe/ZnCdMgSe-based short-wavelength photovoltaic Quantum Cascade Detector (QCD). The QCD operates in two spectral bands centered around 2.6 μm and 3.6 μm. Calibrated blackbody measurements yield a peak responsivity of 0.1 mA/W or 2400 V/W at 80 K, and a corresponding 300 K background radiation limited infrared performance detectivity (BLIP) of ∼2.5 × 10{sup 10 }cm √Hz/W. Comparison of background illuminated and dark current-voltage measurements demonstrates a BLIP temperature of 200 K. The device differential resistance-area product, decreases from about 10{sup 6} Ω cm{sup 2} at 80 K to about 8000 Ω cm{sup 2} at 300 K, indicative of the ultra-low Johnson noise in the detectors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

High power operation of λ ∼ 5.2–11 μm strain balanced quantum cascade lasers based on the same material composition

A technique based on composite quantum wells for design and growth of strain balanced Al{sub 0.63}In{sub 0.37}As/Ga{sub 0.35}In{sub 0.65}As/Ga{sub 0.47}In{sub 0.53}As quantum cascade lasers (QCLs) by molecular beam epitaxy (MBE), emitting in 5.2–11 μm wavelength range, is reported. The strained Al{sub 0.63}In{sub 0.37}As provides good electron confinement at all wavelengths, and strain balancing can be achieved through composite wells of Ga{sub 0.35}In{sub 0.65}As/Ga{sub 0.47}In{sub 0.53}As for different wavelength. The use of these fixed composition materials can avoid the need for frequent calibration of a MBE reactor to grow active regions with different strain levels for different wavelengths. Experimental results for QCLs emitting at 5.2, 6.7, 8.2, 9.1, and 11 μm exhibit good wall plug efficiencies and power across the whole wavelength range. It is shown that the emission wavelength can be predictably changed using the same design template. These lasers are also compatible with a heterogeneous broadband active region, consisting of multiple QCL cores, which can be produced in a single growth run.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

A quantum cascade laser-based water vapor isotope analyzer for environmental monitoring

A field-deployable mid-infrared quantum cascade laser-based spectrometer was designed and developed for measurements of H{sub 2}{sup 16}O and H{sub 2}{sup 18}O at 7.12 μm. H{sub 2}{sup 16}O and H{sub 2}{sup 18}O absorption features at 1390.52 cm{sup −1} and 1389.91 cm{sup −1}, respectively, accessible within current tuning range of the laser, were targeted. The target lines were carefully selected to assure similar absorption levels and similar temperature sensitivities of the line strength due to comparable lower state energies. A real-time spectral fitting algorithm was implemented for isotopic concentration retrieval. Detection limits for H{sub 2}{sup 16}O and H{sub 2}{sup 18}O of 2.2 ppm and 7.0 ppb, respectively, were achieved at a dew point of 14 °C (volume mixing ratio of 15 766 ppm) in 1 s integration time, which resulted in a δ{sup 18}O isotopic ratio measurement precision of 0.25‰. The ultimate minimum detection limits obtained after 160 s integration time for H{sub 2}{sup 16}O and H{sub 2}{sup 18}O, and δ{sup 18}O measurements were 0.6 ppm, 1.7 ppb, and 0.05‰, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Diagonal-transition quantum cascade detector

We demonstrate the concept of diagonal transitions for quantum cascade detectors (QCD). Different to standard, vertical QCDs, here the active transition takes place between two energy levels in adjacent wells. Such a scheme has versatile advantages. Diagonal transitions generally yield a higher extraction efficiency and a higher resistance than vertical transitions. This leads to an improved overall performance, although the absorption strength of the active transition is smaller. Since the extraction is not based on resonant tunneling, the design is more robust, with respect to deviations from the nominal structure. In a first approach, a peak responsivity of 16.9 mA/W could be achieved, which is an improvement to the highest shown responsivity of a QCD for a wavelength of 8 μm at room-temperature by almost an order of magnitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

High temperature, single mode, long infrared (λ = 17.8 μm) InAs-based quantum cascade lasers

We demonstrate quantum cascade lasers in the InAs/AlSb material system which operate up to 333 K (in pulsed regime) at λ = 17.8 μm. They employ metal-metal optical waveguides and the threshold current density is 1.6 kA/cm{sup 2} at 78 K. We also report distributed-feedback devices obtained using the same laser material via a 1{sup st}-order Bragg grating inscribed in the sole top metallic contact. Spectral single mode operation with more than 20 dB side mode suppression ratio is achieved at a temperature of 300 K. Large wavelength tuning rates, of the order of 1.5 nm/K, are demonstrated. A wavelength coverage of 0.38 μm is achieved in single-mode regime over a temperature range of 255 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Nonequilibrium phonon effects in midinfrared quantum cascade lasers

We investigate the effects of nonequilibrium phonon dynamics on the operation of a GaAs-based midinfrared quantum cascade laser over a range of temperatures (77–300 K) via a coupled ensemble Monte Carlo simulation of electron and optical-phonon systems. Nonequilibrium phonon effects are shown to be important below 200 K. At low temperatures, nonequilibrium phonons enhance injection selectivity and efficiency by drastically increasing the rate of interstage electron scattering from the lowest injector state to the next-stage upper lasing level via optical-phonon absorption. As a result, the current density and modal gain at a given field are higher and the threshold current density lower and considerably closer to experiment than results obtained with thermal phonons. By amplifying phonon absorption, nonequilibrium phonons also hinder electron energy relaxation and lead to elevated electronic temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Mid-infrared light emission from a Fe{sup 2+}:ZnSe polycrystal using quantum cascade laser pumping

We report the realization of light emission from a Fe{sup 2+} doped ZnSe polycrystal with efficient pumping from a quantum cascade (QC) laser. The QC laser photon energy is near the absorption edge of the Fe{sup 2+}:ZnSe with less than ∼60 meV Stokes' shift. The Fe{sup 2+}:ZnSe polycrystal shows an absorption band of ∼2.2 – 5 μm in the mid-infrared (mid-IR) at room temperature, which narrows down to ∼2.4–4.2 μm at 80 K. Clear photoluminescence (PL) from 4.5 μm to 6 μm are observed throughout the temperature range of 300 K to 80 K. At room temperature, the luminescence lifetime is about 0.38 ± 0.1 μs which increases up to 101 ± 2 μs at 118 K. This system transfers energy stored in the upper state of a QC laser with ∼ps lifetime to the Fe{sup 2+}:ZnSe with 10{sup 5} to 10{sup 8} times longer lifetime, at the cost of minute photon energy losses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Regrowth-free single-mode quantum cascade lasers with power consumption below 1 W

We report on single-mode distributed-feedback quantum cascade lasers emitting at 4.8 μm with continuous-wave threshold power consumption as low as 0.76 W at 20 °C and 0.98 W at 50 °C. Following growth of the laser active region and semiconductor cladding layers by a single molecular beam epitaxy process, devices with 4-μm-wide ridges and vertical sidewall gratings were fabricated using plasma etching and standard dielectric and metal deposition processes. In terms of mode stability, output power, and efficiency, we show that lasers with 1-mm cavity length and high-reflectivity back-facet coatings can match the performance of buried heterostructure devices, but with the advantage of requiring only a single epitaxial growth step.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Dual-wavelength quantum cascade laser for trace gas spectroscopy

We demonstrate a sequentially operating dual-wavelength quantum cascade laser with electrically separated laser sections, emitting single-mode at 5.25 and 6.25 μm. Based on a single waveguide ridge, this laser represents a considerable asset to optical sensing and trace gas spectroscopy, as it allows probing multiple gas species with spectrally distant absorption features using conventional optical setups without any beam combining optics. The laser capability was demonstrated in simultaneous NO and NO{sub 2} detection, reaching sub-ppb detection limits and selectivity comparable to conventional high-end spectroscopic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Cascade type-I quantum well diode lasers emitting 960 mW near 3 μm

The cascade pumping scheme reduced the threshold current density of high power type-I quantum well GaSb-based λ ∼ 3 μm diode lasers down to ∼100 A/cm{sup 2} at room temperature. Laser heterostructures had single GaInAsSb quantum well gain stages connected in series by means of GaSb/AlSb/InAs tunnel junctions followed by InAs/AlSb electron injectors. Devices with densely stacked two and three gain stages and 100-μm-wide aperture demonstrated peak power conversion efficiency of 16% and continuous wave output power of 960 mW. Corresponding narrow ridge lasers demonstrated above 100 mW of output power. The experiment showed that the bandwidth of the gain and its rate of increase with current depended strongly on the thickness of AlSb layer separating electron injectors from quantum wells. The possible impact of electron injector interfaces and ionized impurities on the carrier scattering and recombination in the active quantum well is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Plasmonic lens enhanced mid-infrared quantum cascade detector

We demonstrate monolithic integrated quantum cascade detectors enhanced by plasmonic lenses. Surface normal incident mid-infrared radiation is coupled to surface plasmon polaritons guided to and detected by the active region of the detector. The lens extends the optical effective active area of the device up to a 5 times larger area than for standard mesa detectors or pixel devices while the electrical active region stays the same. The extended optical area increases the absorption efficiency of the presented device as well as the room temperature performance while it offers a flexible platform for various detector geometries. A photocurrent response increase at room temperature up to a factor of 6 was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗