Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CROSS SECTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Photoelectric scanning /6.65-m/ spectrometer for VUV cross-section measurements

A 6.65-m normal incidence vacuum spectrograph has been provided with a photoelectric scanner that is easily interchangeable with the original plate holder. The scanner consists essentially of a photoelectric detector and an exit slit that scans mechanically along the focal surface while the grating and entrance slit remain stationary. The design and construction of the 6.65-m scanning spectrometer, which operates in the 120-300-nm wavelength region, are discussed. The wavelength resolution of 0.001 nm obtained photoelectrically is better than that of any existing vacuum monochromator. The performance of the instrument is illustrated with vacuum ultraviolet scans of the (1, 5) band of fourth positive system of CO in emission, and the (14, 0) band of the Schumann-Runge system of O2 in absorption.

Yoshino, K.↗
NASA NTRS1981

Seasat SAR cross-section modulation by surface winds - GOASEX observations

Seasat radar observations of the Gulf of Alaska by the Synthetic Aperture Radar (SAR) and the Wind Speed Scatterometer (SASS) indicate that L-band backscatter is modulated by wind speed and possibly by wind direction. It is noted that the L-band backscatter is approximately proportional to the square root of surface winds and that upwind/crosswind differences in backscatter can be as large as 10% in the range of these wind speeds. It is suggested that Seasat SAR images, in conjunction with Seasat Scatterometer data may provide fine-scale mapping of ocean winds and directions. The need for further Seasat SAR-SASS comparisons in order to extend the range of wind speeds is stressed.

Thompson, T. W.↗
NASA NTRS1981

Look direction dependence of radar backscattering cross section for agricultural fields

Analysis of multifrequency-multipolarization scatterometer data acquired by NASA Johnson Space Center during the 1978 Colby Agricultural Soil Moisture Experiment provides evidence that the effects of row orientation remain quite severe for relatively bare fields over a wide range of radar frequencies. In addition, Seasat satellite radar imagery from areas in Louisiana shows dominant row orientation effects even beneath substantial amounts of vegetation cover. The multiparameter nature of the Colby data set, and the continuous angular change in field patterns observed in the Louisiana test area provide much finer definition of microwave sensitivity to row orientation than has been possible in the past.

Waite, W. P.↗
NASA NTRS1980

Application of transmission loss concept in the evaluation of an acoustic filter for liquid-borne transverse resonance modes in a duct of circular cross section

The transmission loss concept is used in the evaluation of an acoustic filter for liquid-borne transverse modes. Tests are conducted to determine the nature of filter element designs required to suppress transverse modes, to verify the presence of transverse modes in the test assembly, to define the acoustic wave incident, and to establish data recording, processing and analysis techniques providing transmission wave filter data. The first, second, and third tangential modes, and the first radial mode are found at frequencies of 2150, 3330, 4420, and 4110 Hz, respectively, and peaks of the tangential modes recede while the radial mode peak remains, demonstrating agreement with theoretical nodal patterns. The present design is found applicable to a liquid-oxygen system, and allows the easy-to-fabricate filter to fit within the available space envelope.

Iwanicki, L. R.↗
NASA NTRS1982

Developing flow in S-shaped ducts. 1: Square cross-section duct

Laser-Doppler velocimetry was used to measure the laminar and turbulent flow in an S-duct formed with two 22.5 deg sectors of a bend with ratio of mean radius of curvature to hydraulic diameter of 7.0. The boundary layers at the inlet to the bend were about 25% and 15% of the hydraulic diameter for the laminar and turbulent flows, respectively. Pressure-driven secondary flows develop in the first half of the S-duct and persist into the second half but are largely reversed by the exit plane as a consequence of the change in the sense of curvature. There is, however, a region near the outer wall of the second bend where the redistribution of the streamwise isotachs results in a reinforcement of the secondary flow which was established in the first half of the S-duct. The net redistribution of the streamwise isotachs is comparable to that occurring in unidirectional bends of stronger curvature. The wall pressure distribution was also measured for the turbulent flow and quantifies the expected large variations in the longitudinal pressure gradient distributions which occur at different radial locations.

Taylor, A. M. K. P.↗
NASA NTRS1985

Measurements of Fe and Ar fragmentation cross sections

Measurements are reported of the yields of individual isotopes of Cr to Co (Z = 24 to 27) resulting from the fragmentation of 56Fe, and the isotopes of Mg to K (Z = 12 to 19) resulting from the fragmentation of 40Ar.

Lau, K. H.↗