Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

On the benefit of using both hand calculation methods and computer experiments algorithms to solve complex nuclear criticality safety problems - 14299

A companion paper shows the 'anomalies', and even the safety issues, that may be raised by the very usual problem of making safe a fissile mass inside a controlled geometry. These anomalies mainly come from the solving of such problems which belong to the mathematical family of 'robust inversion' including two inversion parameters (the fissile mass and the geometry) and one nuisance parameter (the moderation ratio of the fissile material). Since a 'brute force' method of resolution requires a lot of calculations and since a 'smart' method of resolution requires a lot of engineer time, it is tempting to solve these problems by a 'custom made' approach rather than to achieve a 'whole' resolution. The present paper shows how one can use a hand calculation method (derivation of the one-speed diffusion theory) to perform the whole resolution of such kind of problems with a minimum calculations and human efforts. The powerful capability of predicting the 'anomalies' highlighted in the companion paper is shown. Then the limitations of such a method are discussed: limitation in the geometry of the problem and bias in absolute values prediction. Finally, new algorithms of computer experiments design, dedicated to solve robust inversion problems and based on Kriging surrogates, are tested to solve these problems with limiting calculations and human efforts. The performance of these new algorithms may supplement the one-speed diffusion theory limitations. (authors)

42 ENGINEERING↗

SCALE Sensitivity Calculations Using Contributon Theory

The SCALE TSUNAMI-3D sensitivity and uncertainty analysis sequence computes the sensitivity of k-eff to each constituent multigroup cross section using adjoint techniques with the KENO Monte Carlo codes. A new technique to simultaneously obtain the product of the forward and adjoint angular flux moments within a single Monte Carlo calculation has been developed and implemented in the SCALE TSUNAMI-3D analysis sequence. A new concept in Monte Carlo theory has been developed for this work, an eigenvalue contributon estimator, which is an extension of previously developed fixed source contributon estimators. A contributon is a particle for which the forward solution is accumulated, and its importance to the response, which is equivalent to the adjoint solution, is simultaneously accumulated. Thus, the contributon is a particle coupled with its contribution to the response, in this case keff. As implemented in SCALE, the contributon provides the importance of a particle exiting at any energy or direction for each location, energy and direction at which the forward flux solution is sampled. Although currently implemented for eigenvalue calculations in multigroup mode in KENO, this technique is directly applicable to continuous-energy calculations for many other responses such as fixed-source sensitivity analysis and quantification of reactor kinetics parameters. This paper provides the physical bases of eigenvalue contributon theory, provides details of implementation into TSUNAMI-3D, and provides results of sample calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ground State Structure of BaFeO{sub 3}: Density Functional Theory Calculations

Using density functional theory calculations, the ground state structure of BaFeO{sub 3} (BFO) is investigated with local spin density approximation (LSDA). Cubic, tetragonal, orthorhombic, and rhombohedral types BFO are considered to calculate the formation enthalpy. The formation enthalpies reveal that cubic is the most stable structure of BFO. Small energy difference between the cubic and tetragonal suggests a possible tetragonal BFO. Ferromagnetic (FM) and anitiferromagnetic (AFM) coupling between the Fe atoms show that all the striochmetric BFO are FM. The energy difference between FM and AFM shows room temperature ferromagnetism in cubic BFO in agreement with the experimental work. The LSDA-calculated electronic structures are metallic in all studied crystallographic phases of BFO. Calculations including the Hubbard potential U, i.e. LSDA + U, show that all phases of BFO are half-metallic consistent with the integer magnetic moments. The presence of half-metallicity is discussed in terms of electronic band structures of BFO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A First-Principle Calculation and de Haas-van Alphen Effect Simulation in Superconductor LaNiC{sub 2}

In this article the electronic structure and de Haas-van Alphen effect of LaNiC{sub 2} have been calculated by using the first-principle calculations. The antisymmetric spin-orbit coupling effect causes splitting estimated to be 62.9 and 27.5 meV in the two bands crossing the Fermi level. Regular translations between spin-up and spin-down states have been observed and calculated in discrete ranges of energy. Spin-orbit coupled Fermi surfaces are derived and the related de Hass-van Alphen effects have been simulated from the ELK-flapw calculations. The unusual disconnections in low-frequency area have been discussed in details. The Fermi surface topology of spin-up (l + 1/2) is very different from that of spin-down (l − 1/2) which is also evident by the proportions of electron-like bands. Finally the relationship between simulation results and Fermi surface details has been discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Structural, Electronic, Magnetic, and Optical Properties of Mn{sub 2}ZrGa{sub 1−x}Ge{sub x} Heusler Alloys: First-Principles Calculations

The structural, electronic, magnetic, and optical properties of Mn-based Heusler Mn{sub 2}ZrGa{sub 1−x}Ge{sub x} (x = 0, 0.25, 0.5, 0.75, and 1) alloys are calculated by first-principles full-potential linearized augmented plane wave plus local orbital (FP-LAPW+lo) method. It is found that Mn{sub 2}ZrGa{sub 1−x}Ge{sub x} alloys are half-metallic ferrimagnetic and their magnetic moments are in good agreement with the Slater–Pauling relationship. The calculations reveal that all alloys have a pseudo-gap in the majority-spin channel except for x = 0.75 and x = 1 which have a real gap in the majority-spin channel. The spin polarization is quite large for whole series, and it reaches to a value of 100% for x = 0.75 and x = 1. Our calculated results clearly show that with the Ge substitution, the lattice parameter linearly decreases while the bulk modulus increases. Moreover, the calculated formation energies confirm that these alloys are stable chemically. The optical properties, including the real and imaginary parts of the dielectric function, reflectivity, and absorption spectra, were also investigated. The results show that the dominant behavior, at energy below 1 eV, is due to interactions of free electrons in the system. The increment of Ge concentration leads to an increase in the plasma frequency of metallic spin channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculations of the Structural, Elastic, Magnetic, and Electronic Properties of the New Compound BaZr{sub 0.5}Mn{sub 0.5}O{sub 3} with Tetragonal Structure

Based on the density functional theory, we have calculated the structural properties of the BaZrO{sub 3} (BZO) cubic structure with PBE-GGA, PBEsol-GGA, and LDA approximations. The equilibrium lattice constant within GGA-PBEsol (a = 4.1847 Å) is in very good agreement with the experimental data (Holland and Redfern, Miner. Mag. 61: 65, 1997). The calculations of elastic properties of pure and doped BaZrO{sub 3} are calculated with PBEsol-GGA; both BZO and BZM are compressible and show a brittle nature. According to calculated electronic and magnetic properties, it is found that Mn-doped BaZrO{sub 3} system is a half metallic and exhibits a ferromagnetic character. The total magnetic moment of the cell is equal to3.57 µ{sub B}; this value comes from manganese atom (Mn) with a value of 3.176 µ{sub B}. The magnetic moments of barium, oxygen, and zirconium atoms are approximately equal to zero.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Calculations of New Full Heusler Alloys Rh{sub 2}ZrX (X = Al, Ga, In, Si, Ge, Sn)

In recent years, Heusler alloys have attracted extensive attention because of their usefulness in spintronic devices. In this paper, the structural, electronic, and magnetic properties of full Heusler alloys Rh{sub 2}ZrX (X = Al, Ga, In, Si, Ge, Sn) have been studied using Quantum Espresso software package based on density functional theory. Calculations have been done by GGA and GGA+U methods. The investigations on the structural properties of the alloys showed that the Rh{sub 2}ZrSi alloy had the most stable structure (E{sub coh} = − 1.807 eV) among the six compounds reviewed. The results of GGA calculation on electronic properties of Rh{sub 2}ZrX alloys show that while the Rh{sub 2}ZrX (X = Al, Ga, In) alloys had metallic nature due to overlapping between conduction and valance band at Fermi level for both spin directions, the Rh{sub 2}ZrX (X = Si, Ge, Sn) alloys had half-metal characteristic. Also, Rh{sub 2}ZrSi and Rh{sub 2}ZrGe alloys had 100% spin polarization. By studying the magnetic properties, it was found that the Rh{sub 2}ZrAl and Rh{sub 2}ZrSi alloys were antiferromagnetic, while the Rh{sub 2}ZrGa, Rh{sub 2}ZrIn, Rh{sub 2}ZrGe, and Rh{sub 2}ZrSn alloys were ferromagnetic materials. Also, the total spin magnetic moment of alloys was found in accordance with the Slater-Pauling rule. The results obtained using GGA+U calculation are slightly different from the results of GGA calculation.

36 MATERIALS SCIENCE↗

Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging

A transient numerical model was proposed and validated by the current authors for nozzle clogging (Barati et al. in Powder Technol 329:181-98, 2018). The model can reproduce the experiment in pilot scale satisfactorily. In the present article, the main objective is to validate the model for application in industry process continuous casting of steel, referring to the model accuracy and calculation efficiency. The results have shown that for the complex geometry of submerged entry nozzle (SEN), where it is difficult to create hexahedron mesh in the entire domain, a mixed mesh type is recommended, i.e., the wedge mesh for regions adjacent to SEN walls and the tetrahedron mesh for inner regions. Another challenge to the calculation of real SEN clogging is the huge number of particles involved in the industry process. An artificial factor, the N-factor, has to be introduced to reduce the calculation cost. A dimensionless number (α) is defined to limit the N-factor and ensure the modeling accuracy. Simulation of a test case has indicated that by an appropriate N-factor (1000, corresponding to α = 6 × 10{sup −5}), the calculation time would be reduced significantly to a reasonable time.

36 MATERIALS SCIENCE↗

Calculations of photo-induced X-ray production cross-sections in the energy range 1–150 keV and average fluorescence yields for Zn, Cd and Hg

In this paper, we calculate the K-, L- and M-shells X-ray production, and X-ray fluorescence cross-sections after photo-induced ionization, for Zn, Cd, and Hg, and for incident photon energy range from 1 to 150 keV. For this purpose, the corresponding average fluorescence yields for Zn, Cd, and Hg as well as the photoionization cross-sections were calculated using the Dirac–Fock method. Subshell fluorescence, intrashell and intershell yields are obtained consistently from radiative and radiationless transitions calculated in the exact same method. A comprehensive account of the relations between the X-ray production, X-ray fluorescence cross-sections and the photoionization cross-sections and these yields is presented. Comparisons are made with results from other authors. The obtained values for the photoionization cross-sections are in good agreement with the widely used data of Scofield in the studied energy range. However our results for the X-ray fluorescence cross sections seem to favor some data relatively to others. The energy dependence of the average fluorescence yields is discussed, in particular, the reliability of extrapolated data for lighter elements from measurements and calculations in heavier elements above the inner shell absorption edges is questioned. Tabulated data on photoionization and X-ray production cross-sections are presented for the incident photon energy range 1–150 keV in steps of 1 keV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Large-scale calculations of atomic level and transition properties in the aluminum isoelectronic sequence from Ti X through Kr XXIV, Xe XLII, and W LXII

Large-scale self-consistent multiconfiguration Dirac–Hartree–Fock subsequent relativistic configuration interaction (RCI) calculations are reported for 360 states belonging to the 30 configurations 3s{sup 2}{3l,4l,5l}, 3p{sup 2}{3d,4l}, 3s{3p"2,3d"2}, 3s{3p3d,3p4l,3p5s,3d4l"′}, 3p3d{sup 2}, 3p{sup 3} and 3d{sup 3} with l=0,1,…,n−1 and l{sup ′}=0,1,2 in 17 systems of the aluminum-like isoelectronic sequence: Ti X through Kr XXIV, Xe XLII, and W LXII. Effects from electron correlation are taken into account by means of large expansions in terms of a basis of configuration state functions (CSF) and calculated energy levels are compared with existing theoretical calculations and the NIST Atomic Spectra database. Radiative E1, E2, M1 and M2 transition rates and associated lifetimes of energy levels are presented in online tables. The uncertainties of the calculated energies are very small, on average between 0.02% and 0.05%, which aid new line identifications in laboratory and astronomical spectra and also make it possible to find and rule out misidentifications. The uncertainties of the E1 transition probabilities, based on the agreement between values in the length and velocity gauges, are estimated to be of the order 0.5% for the strong transitions and 25% for the weaker intercombination transitions. The M1 transition values are not sensitive to electron correlation and are believed to be accurate to well within 1%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Advances in the calculation of optical properties in superlattices; novel insights derived from the theory of finite periodic systems

Highlights: • Truly quantum calculation of optical properties in superlattices. • An approach that goes beyond the abilities of the current approaches in the literature. • Accurate calculations based on bona fide superlattice eigenvalues and eigenfunctions. • Accurate calculation of optical-transition matrix elements and new selection rules. • Optical spectra of AlGaAs and InGaN superlattices agree with experimental results. • Optical spectra features of blue diodes faithfully reproduced and fully explained. • Unexplained lines in high-resolution spectra assigned to surface and edge states. - Abstract: Using the genuine superlattice eigenvalues and eigenfunctions, and their parity symmetries, new transition selection rules are derived, and a novel approach for the explicit calculation of the optical spectra of periodic structures presented. The optical response and infrared spectra published in the last 40 years for (In, Ga)N and (Al, Ga)As superlattices, with different number of unit cells n (varying from ∼10 to ∼400) and barrier and valley widths in the range of 2.5 nm to 40 nm, and different properties have been revisited. Among the various examples discussed here, we study the narrow peaks clustered in groups reported in high resolution spectra of blue-emitting devices, that could not be explained until now. These properties are faithfully reproduced and fully understood. We show that these effects are related to and depend on the surface energy levels and their tuneable detachment. We shown also that the optical transitions experimentally observed, but forbidden by the current optical physics, are really allowed transitions. Since the number of energy eigenvalues E{sub μ,ν}{sup r,v} and eigenfunctions Ψ{sub μ{sup ′},ν{sup ′r,v}}(z) is now much greater, the number of allowed matrix-elements can be extremely large (of the order of n{sup 2} n{sub c}n{sub v}∕2, with n{sub c} and n{sub v} the number of subbands in the conduction and valence bands). We show that this number can be reduced by using the eigenfunctions’ symmetries, which are behind the parity symmetry selection rules and the leading order selection rules. These rules reduce the number of matrix-elements evaluations from ∼n{sup 2}n{sub c}n{sub v}∕2 to ∼nn{sub c}n{sub v}∕2, i.e., depending on the superlattice, from about 1000 to 100. We discuss also a third rule, that collects the contributions of the surface and edge states, reducing the number of transitions even more to N{sub s}≤n{sub c}n{sub v}. With these rules, the main peaks are conserved and their number practically matches that of the real spectrum. Excellent agreements are found with experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A paraboloid fitting technique for calculating curvature from piecewise-linear interface reconstructions on 3D unstructured meshes

In this work, we present a novel method for calculating interface curvature on 3D unstructured meshes from piecewise-linear interface reconstructions typically generated in the volume of fluid method. Interface curvature is a necessary quantity to calculate in order to model surface tension driven flow. Curvature needs only to be computed in cells containing an interface. The approach requires a stencil containing only neighbors sharing a node with a target cell, and calculates curvature from a least-squares paraboloid fit to the interface reconstructions. This involves solving a 6 × 6 symmetric linear system in each mixed cell. We present verification tests where we calculate the curvature of a sphere, an ellipsoid, and a sinusoid in a 3D domain on regular Cartesian meshes, distorted hex meshes, and tetrahedral meshes. Lastly, for both regular and unstructured meshes, we find in all cases the paraboloid fitting method for curvature to converge between first and second order with grid refinement.

97 MATHEMATICS AND COMPUTING↗

Automated identification and calculation of prompt effects in kinetic mechanisms using statistical models

The kinetics of prompt dissociation involves rovibrationally excited species (generally formed by exothermic reactions) which may dissociate or isomerize prior to thermalization via collisions with the bath gas. Treating such rovibrationally excited species (so-called "hot" species) with standard kinetic phenomenology may result in incorrect macroscopic representation of their reactivity. Here this work presents the first fully automated methodology for the calculation of prompt effects of a chosen species in a kinetic mechanism, including (i) reaction selection; (ii) theoretical calculation of rate constants and prompt branching fractions; and (iii) final rate constant fitting. The energy partition between hot fragments is estimated using a variety of statistical models, including a new physically sound microcanonical statistical model based on the rovibrational density of states of the fragments. The methodology is validated against literature data for the prompt dissociations of HCO and C 3 H 7 radicals. The microcanonical statistical model is in better agreement with trajectory simulations for larger species and is thus applicable for practical systems that typically involve large molecules, for which direct dynamics calculations are impractical. The automated workflow is applied to the evaluation of the effects of prompt dissociation for two isomeric radicals C 4 H 7 1-3 (1-methylallyl) and C 4 H 7 1-4 (3-buten-1-yl). Twelve H-atom abstraction reactions are selected and the corresponding rate constants are computed with first principles theory. The microcanonical statistical model predicts that prompt dissociations of C 4 H 7 1-3 and C 4 H 7 1-4 are already significant at 1000K, resulting in differences of up to an order of magnitude at 2000K with respect to the phenomenological thermal rate constants. To illustrate the effects of prompt dissociation on simulations of experimental data, the calculated prompt rate constants are implemented in both CRECK and C3MechV3.3 kinetic mechanisms. Simulations of experimental flame data illustrate the noticeable impact of prompt dissociation kinetics on the high-temperature combustion reactivity of C 4 H 8 -1 and C 4 H 8 -2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HTESP (High-throughput electronic structure package): A package for high-throughput ab initio calculations

High-throughput ab initio calculations are the indispensable parts of data-driven discovery of new materials with desirable properties, as reflected in the establishment of several online material databases. The accumulation of extensive theoretical data through computations enables data-driven discovery by constructing machine learning and artificial intelligence models to predict novel compounds and forecast their properties. Efficient usage and extraction of data from these existing online material databases can accelerate the next stage materials discovery that targets different and more advanced properties, such as electron–phonon coupling for phonon-mediated superconductivity. However, extracting data from these databases, generating tailored input files for different ab initio calculations, performing such calculations, and analyzing new results can be demanding tasks. Here, in this work, we introduce a software package named “HTESP” (High-Throughput Electronic Structure Package) written in Python and Bash languages, which automates the entire workflow including data extraction, input file generation, calculation submission, result collection and plotting. Our HTESP will help speed up future computational materials discovery processes.

36 MATERIALS SCIENCE↗

An efficient MILP framework for integrating nonlinear process dynamics and control in optimal production scheduling calculations

The emphasis currently placed on enterprise-wide decision making and optimization has led to an increased need for methods of integrating nonlinear process dynamics and control information in scheduling calculations. The inevitable high dimensionality and nonlinearity of first-principles dynamic process models makes incorporating them in scheduling calculations challenging. In this work, we describe a general framework for deriving data-driven surrogate models of the closed-loop process dynamics. Focusing on Hammerstein–Wiener and finite step response (FSR) model forms, we show that these models can be (exactly) linearized and embedded in production scheduling calculations. The resulting scheduling problems are mixed-integer linear programs with a special structure, which we exploit in a novel and efficient solution strategy. A polymerization reactor case study is utilized to demonstrate the merits of this method. Finally, our framework compares favorably to existing approaches that embed dynamics in scheduling calculations, showing considerable reductions in computational effort.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Crack opening calculation in phase-field modeling of fluid-filled fracture: A robust and efficient strain-based method

The phase-field method has become popular for the numerical modeling of fluid-filled fractures, thanks to its ability to represent complex fracture geometry without algorithms. However, the algorithm-free representation of fracture geometry poses a significant challenge in calculating the crack opening (aperture) of phase-field fracture, which governs the fracture permeability and hence the overall hydromechanical behavior. Although several approaches have been devised to compute the crack opening of phase-field fracture, they require a sophisticated algorithm for post-processing the phase-field values or an additional parameter sensitive to the element size and alignment. Here, we develop a novel method for calculating the crack opening of fluid-filled phase-field fracture, which enables one to obtain the crack opening without additional algorithms or parameters. Here we transform the displacement-jump-based kinematics of a fracture into a continuous strain-based version, insert it into a force balance equation on the fracture, and apply the phase-field approximation. Through this procedure, we obtain a simple equation for the crack opening which can be calculated with quantities at individual material points. We verify the proposed method with analytical and numerical solutions obtained based on discrete representations of fractures, demonstrating its capability to calculate the crack opening regardless of the element size or alignment.

58 GEOSCIENCES↗

Quantum Calculations on Salt Bridges with Water: Potentials, Structure, and Properties

Salt bridges are electrostatic links between acidic and basic amino acids in a protein; quantum calculations are used here to determine the energetics and other properties of one form of these species, in the presence of water molecules. The acidic groups are carboxylic acids (aspartic and glutamic acids); proteins have two bases with pK above physiological pH: one, arginine, with a guanidinium basic group, the other lysine, which is a primary amine. Only arginine is modeled here, by ethyl guanidinium, while propionic acid is used as a model for either carboxylic acid. The salt bridges are accompanied by 0-12 water molecules; for each of the 13 systems, the energy-bond distance relation, natural bond orbitals (NBO), frequency calculations allowing thermodynamic corrections to room temperature, and dielectric constant dependence, were all calculated. The water molecules were found to arrange themselves in hydrogen bonded rings anchored to the oxygens of the salt bridge components. This was not surprising in itself, but it was found that the rings lead to a periodicity in the energy, and to a 'water addition' rule. The latter shows that the initial rings, with four oxygen atoms, become five member rings when an additional water molecule becomes available, with the additional water filling in at the bond with the lowest Wiberg index, as calculated using NBO. The dielectric constant dependence is the expected hyperbola, and the fit of the energy to the inverse dielectric constant is determined. There is an energy periodicity related to ring formation upon addition of water molecules. When 10 water molecules have been added, all spaces near the salt bridge are filled, completing the first hydration shell, and a second shell starts to form. The potentials associated with salt bridges depend on their hydration, and potentials assigned without regard to local hydration are likely to cause errors as large as or larger than kBT, thus suggesting a serious problem if these potentials are used in Molecular Dynamics simulations.

08 HYDROGEN↗

Reproducibility of calculations on Li species with correlation-consistent basis sets

Here we have found that two different basis set series, both labeled cc-pVxZ, are widely available and widely used for calculation on Li compounds such that calculations that should be the same are different, causing a reproducibility problem. Here we study the magnitude of the disagreement of these nominally-the-same basis sets for wave function and density functional calculations of Li clusters. We find deviations among the basis sets of as large as 22 millihartrees. In most cases one obtains lower energies with the noncanonical choices. Therefore, it is important to specify which version of the basis set is used for calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗