Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Burn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Forward Analytic Model of Neutron Time-of-Flight Signals for Inferring Ion Temperatures from MagLIF Experiments

A forward analytic model is required to rapidly simulate the neutron time-of-flight (nToF) signals that result from magnetized liner inertial fusion (MagLIF) experiments at Sandia’s Z Pulsed Power Facility. Various experimental parameters, such as the burn-weighted fuel-ion temperature and liner areal density, determine the shape of the nToF signal and are important for characterizing any given MagLIF experiment. Extracting these parameters from measured nToF signals requires an appropriate analytic model that includes the primary deuterium-deuterium neutron peak, once-scattered neutrons in the beryllium liner of the MagLIF target, and direct beamline attenuation. Here, mathematical expressions for this model were derived from the general-geometry time- and energy-dependent neutron transport equation with anisotropic scattering. Assumptions consistent with the time-of-flight technique were used to simplify this linear Boltzmann transport equation into a more tractable form. Models of the uncollided and once-collided neutron scalar fluxes were developed for one of the five nToF detector locations at the Z-Machine. Numerical results from these models were produced for a representative MagLIF problem and found to be in good agreement with similar neutron transport simulations. Twenty experimental MagLIF data sets were analyzed using the forward models, which were determined to only be significantly sensitive to the ion temperature. The results of this work were also found to agree with values obtained separately using a zero scatter analytic model and a high-fidelity Monte Carlo simulation. Finally, inherent difficulties in this and similar techniques are identified, and a new approach forward is suggested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Fusion Fuel Cycle Inventory Reduction Studies Using a Processing-Time–Based Discrete-Time Interval Model

Developing a Fusion Pilot Plant (FPP) design that minimizes risks due to tritium in-process inventory (IPI) is an important concern for the operation of commercial devices. This becomes even more of concern since an FPP will be breeding more tritium than is burned in the reactor for sustainability. The IPI is the tritium moving through the system that is not in the storage and delivery subsystem. Here a process model that solves time-dependent differential equations based on processing times was used to investigate the reduction of the IPI of a potential fuel cycle design. The impact of new and more efficient technologies such as direct internal recycling (DIR), metal foil pumps, continuous pumping, improved isotope separation, and hydrogen separating continuous pumps on IPI was investigated by adjusting subsystem processing times and material flow streams. It was shown that any of the insertions of DIR studied in this paper caused a reduction in the total IPI of the system and proved to be the optimal way to reduce the IPI in the system. Fuel cycle modifications near the torus, such as a coupled DIR and improved pumping systems, produced the largest reductions in tritium inventory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A New Integrated Analysis Suite for Fast-Ion Study in KSTAR

Here, an integrated workflow for fast-ion analysis was developed by adapting the One Modeling Framework for Integrated Task (OMFIT) workflow manager to support a standard and unified analysis platform for KSTAR users. The newly established analysis suite offers a graphical user interface–based workflow to enable users to readily access and handle experimental data archived in various data formats and servers. Further, users can analyze the data by importing modules designed for conducting certain tasks, such as profile fitting, equilibrium reconstruction, and postprocessing of tokamak data. The procedures for preparing the inputs for fast-ion simulations are streamlined by a common workflow manager, which enables the parallel processing of various tasks to efficiently analyze large fast-ion datasets. The OMFIT platform comprises a flexible Python-based application that enables users to freely manipulate the Python scripts for applications that are unavailable in the standard workflow. The framework also offers mapping tools to translate the output data into the Integrated Modeling and Analysis Suite format to maintain application compatibility for future ITER burning plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Systematic Source Determination and X-Ray Radiography Detection of Nonuniformities on High-Density Carbon Ablators

Recent deuterium-tritium (D-T)–layered implosion experiments at the National Ignition Facility have achieved a burning plasma and >1-MJ neutron yield. A series of repeat experiments have shown that the degree of performance is very likely dependent on capsule quality, including the quantity of what are collectively termed “high- Z particles.” These particles are detected on a custom-built radiography system, known as the Sagometer, during the final target qualification process. The term particles is misleading, as the source of these nonuniformities in the capsule images is uncertain; the term detection will be used instead. An increased number of D-T targets have been rejected at the final stages of production due to Sagometer detections. Late detections are deleterious in terms of loss of production parts, effort, and overall operating efficiency. In response, we undertook an effort to determine the origin of these detections and to ultimately mitigate target losses caused by them. Through careful testing and analysis, we have determined neither insufficient production cleanliness nor hohlraum shedding is responsible for the detections on the capsule. Here, we determined that the detections are inherent to the capsule and have made efforts to use the Zeiss Xradia to identify them earlier in the production process. While testing revealed the Xradia is not currently sufficient for identifying such particles using radiography images, we continue to look to other forms of metrology to down select the capsules early in the process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

The Impact of Disruptions on the Economics of a Tokamak Power Plant

Tokamaks are often considered to be a leading candidate for near-term, cost-effective fusion energy, but these devices are susceptible to sudden loss of confinement events called disruptions. The threat of disruptions has garnered serious attention in research for the next generation of burning plasma experiments, such as ITER, but has received little treatment in economic studies of magnetic fusion energy. In this paper, we present a model for quantifying the effect of disruptions on the cost of electricity produced by a tokamak power plant (TPP). We outline the various ways disruptions increase costs and decrease revenues, introduce metrics to quantify these effects, and add them to a levelized cost of electricity (LCOE) model. Additionally, we identify several rate-limiting repair steps and introduce a classification system of disruption types based on the time to return to operations. We demonstrate how the LCOE model can be used to find the cost of electricity and the requirements for disruption handling of a TPP, and we further highlight where future research can have a strong impact in neutralizing the “showstopping” potential of disruptions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Mg and native defects in cubic silicon carbide from first principles

The diffusion of Mg defects in 3C-SiC is studied using the density functional theory. Mg has the highest burn-in rate as a transmutant in 3C-SiC when it is placed in high-energy neutron irradiation environment of a fusion reactor. The presence and evolution of transmutant defects impact thermal and mechanical properties of this important structural material. This study is focused on understanding the structure, stability, and evolution of Mg defects and the interaction of Mg with native defects in 3C-SiC. Our calculations of diffusion coefficients for different Mg defects suggest that Mg is likely to diffuse faster in pristine 3C-SiC than in the damaged one, in agreement with earlier experimental observations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Characterization of the ELM-free negative triangularity edge on DIII-D

Tokamak plasmas with strong negative triangularity (NT) shaping typically exhibit fundamentally different edge behavior than conventional L-mode or H-mode plasmas. On DIII-D, every plasma with sufficiently negative triangularity (δ < δ crit ≃ -0.12) is found to be inherently free of edge localized modes (ELMs), even at injected powers well above the predicted L-H power threshold. It is also possible to access an ELM free state at weaker average triangularities provided that at least one of the two x-points is still sufficiently negative. Access to the ELM-free NT scenario is found to coincide with the closure of the second stability region for infinite-n ballooning modes, suggesting that ballooning stability may play a role in limiting the accessible pressure gradient in NT plasmas. Despite this, NT plasmas are able to support small pedestals and are typically characterized by an enhancement of edge pressure gradients beyond those found in traditional L mode plasmas. Further, the pressure gradient inside of this small pedestal is unusually steep, allowing access to high core performance that is competitive with other ELM-free regimes previously achieved on DIII-D. Since ELM-free operation in NT is linked directly to the magnetic geometry, NT fusion pilot plants are predicted to maintain advantageous edge conditions even in burning plasma regimes, potentially eliminating reactor core-integration issues caused by ELMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Divertor detachment and heat exhaust mitigation control in KSTAR with tungsten divertor

KSTAR has recently undergone an upgrade to use a new tungsten divertor to run experiments in ITER-relevant scenarios. Even with a high melting point of tungsten, it is important to control the heat flux impinging on tungsten divertor targets to minimize sputtering and contamination of the core plasma. Heat flux on the divertor is often controlled by increasing the degree of detachment of scrape-off layer plasma from the target plates. In this work, we have demonstrated successful divertor detachment and heat exhaust dissipation control experiments using two different methods. The first method uses attachment fraction as a control variable which is estimated using ion saturation current measurements from embedded Langmuir probes in the divertor. The second method uses a novel machine-learning-based surrogate model of 2D UEDGE simulation database, DivControlNN. We demonstrated running inference operation of DivControlNN in realtime to estimate heat flux at the divertor and use it as the control variable in a feedback loop with impurity gas flow. We present interesting insights from these experiments including a systematic approach to tuning controllers and discuss future improvements in the control infrastructure and control variables for future burning plasma experiments.

KSTAR tungsten divertor operations↗
DOE OSTI2020

Erosion and cathodic arc plasma of Nb–Al cathodes: composite versus intermetallic

Many properties of cathodic arcs from single-element cathodes show a correlation to the cohesive energy of the cathode material. For example, the burning voltage, the erosion rate, or, to a lesser extent, plasma properties like electron temperatures or average ion energy and charge states. For multi-element cathodes, various phases with different cohesive energies can initially be present in the cathode, or form due to arc exposure, complicating the evaluation of such correlations. To test the influence of morphology and phase composition of multi-element cathodes on cathodic arc properties, a Nb–Al cathode model system was used that includes: pure Nb and Al cathodes; intermetallic Nb 3 Al, Nb 2 Al and NbAl 3 cathodes; and three composite Nb–Al cathodes with atomic ratios corresponding to the stoichiometric ratios of the intermetallic phases. Pulsed cathodic arc plasmas from these cathodes were examined using a mass-per-charge and energy-per-charge analyzer, showing that charge-state-resolved ion energy distributions of plasmas from the intermetallic and corresponding composite cathodes are nearly identical. An examination of converted layers of eroded cathodes using x-ray diffraction and scanning electron microscopy indicates the formation of a surface layer with similar phase composition for intermetallic and their corresponding composite cathode types. The average arc voltages do not follow the trend of cohesive energies of Nb, Al and intermetallic Nb–Al phases, which have been calculated using density functional theory. Possible reasons for this effect are discussed based on the current knowledge of multi-element arc cathodes and their arc plasma available in literature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced helium exhaust during edge-localized mode suppression by resonant magnetic perturbations at DIII-D

Effective helium confinement time, τ p * ,He , and its ratio with energy confinement time, τ p * ,He / τ E , are key metrics quantifying the suitability of fusion plasmas for a continuous burn. Comparisons in the DIII-D tokamak of discharges with suppression of edge localized modes (ELMs) by resonant magnetic field perturbations (RMPs) to the corresponding unperturbed ELMy discharges found that both of these metrics were strongly reduced, by a factor of approximately 2, after application of the RMPs. This reduction in τ p * ,He during RMP ELM suppression was observed in the plasma core, edge, and pumping plenum, where higher neutral helium concentration during RMPs was also measured. In conclusion, these findings provide evidence that future devices employing RMP ELM suppression may meet or even exceed the helium exhaust provided by the ELMs themselves, reducing helium ash, and thus maintaining high fusion gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Overview of density pedestal structure: Role fueling versus transport

How much of the density pedestal structure profile is determined by fueling versus transport is still a valid question. In most current tokamaks, the Scrape-Off Layer is not opaque enough to screen the neutrals and limit their penetration past the separatrix. As such recycled neutrals as well as additional gas puffing can directly affect the pedestal structure through ionization. Yet, in ITER and other future burning plasma magnetic confinement devices, this ionization source will be pushed further out into the Scrape-Off Layer. This poses the question, how much of the pedestal density structure is governed by this edge ionization source versus plasma transport effects. Theoretically, several turbulent modes have been identified which could provide a 'pinch' like up-gradient transport mechanism. Up-gradient transport is necessary in a source-free region to obtain a peaked density profile, which is often observed in the core of tokamaks. In an opaque Scrape-Off Layer, without the existence of such a pinch, the pedestal density structure would eventually disappear. Not only would this limit our ability to fuel a fusion reactor, it would also affect the pedestal stability. In this paper we will give an overview of the state of the art on what sets the pedestal density structure based on experimental observations as well as theoretical models. We will complement these studies with new results from Alcator C-Mod and DIII-D where the opaqueness is increased to reach values similar to those in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Follow the power—pathways to steady-state tokamak reactors

Abstract Diagramming pathways of dimensionless power is a potent method for extrapolating between operating points on present-day tokamaks and future burning plasma devices. The heat transport power, current drive power, H-mode threshold power and other ‘plasma physics’ powers can be expressed in dimensionally correct (or normalized) form as Pa 3/4 , where P is the power and a is the plasma minor radius, with the relative gyroradius ( ρ * ) dependence ranging from gyro-Bohm-like for transport ( P a 3 / 4 ∝ ρ * − 3 / 2 ), Bohm-like for current drive ( P a 3 / 4 ∝ ρ * − 5 / 2 ) and worse than Bohm-like for H-mode threshold ( P a 3 / 4 ∝ ρ * − 3 ). The D–T fusion power cannot be normalized in the same fashion since it is governed by nuclear physics, but at fixed B T it scales like P a 3 / 4 ∝ ρ * − 9 / 2 . Other ‘mixed physics’ powers can be incorporated into the dimensionless power framework by holding B T fixed in the same manner. Diagramming these dimensionless powers vs ρ * shows how the pathway to a steady-state reactor can be optimized relative to various operational boundaries. Using a steady-state hybrid discharge with β N = 3.2 from DIII-D as the starting point, a multi-parameter optimization finds an attractive pathway to steady-state operation on ITER using 76 MW of current drive power (fusion gain of Q fus = 8), along with a pathway to Q fus = 20 in a JET-sized steady-state reactor with B T = 10 T.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Numerical investigation of alpha particle confinement under the perturbation of neoclassical tearing modes and toroidal field ripple in CFETR

The confinement of alpha particles in burning plasma is a key issue in fusion reactor design, including particle interaction with instabilities. Here, we include two topics: the effect of neoclassical tearing modes (NTMs) and toroidal field ripple on alpha particle loss, and the assessment of particle redistribution under an NTM with a reduced model. We consider Chinese fusion engineering test reactor parameters, the alpha particle distribution given by TRANSP/NUBEAM and the NTM perturbation function given by the initial value code TM1. We show that the synergistic effect of the NTM and ripple is negligible; the particle loss fraction does not change with increasing NTM amplitude. Only passing particles are affected by the mode particle resonance, producing profile flattening but no increased loss because only trapped particles are influenced by ripple. To study alpha particle profile flattening, the work adopts an innovative method of phase vector rotation to determine regions of good and broken Kolmogorov–Arnold–Moser surfaces and equilibrates the particle density according to local stochasticity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

The role of edge plasma parameters in H-mode density limit on the JET-ILW

A study of a dataset of JET H-mode plasma with the Be/W ITER-like wall (JET-ILW) shows that reaching the edge MHD ballooning limit leads to confinement degradation. However, unlike JET plasmas with a carbon wall (JET-C), the JET-ILW plasmas stay in a marginal dithering phase for a relatively long period, associated with a higher (≈20%) H-mode density limit (HDL) than JET-C equivalents. This suggests that ITER could be operated in H-mode with higher density than the scaling based on carbon wall devices, but likely with a dithering phase plasma with lower confinement. A new, reliable estimator for JET E r, min has been derived by combining HRTS measurements of pedestal gradient and edge-SOL decay lengths. JET radial E r ETB wells are observed in the range of -15 to -60 kV m -1 in high performance H-modes, consistent with previous CXRS results in ASDEX Upgrade. The results imply that a higher positive E &#x00d7; B shear in the near SOL plays a role in sustaining a marginal phase in JET-ILW which leads to a higher HDL than that in JET-C. The results of the JET-ILW dataset show agreement with the Goldston finite collisionality HD model for SOL broadening at high collisionality. A hypothesis for the dithering H-mode phase is proposed: as n e,SOL increases, ν *,SOL increases, SOL broadens, E r shear decreases, triggers L-mode; n e drops, ν *,SOL decreases, SOL becomes narrower, and E r shear increases, triggering H-mode, resulting in a cycle of H–L–H- oscillations. For burning plasma devices, such as ITER, operating just below the MHD limit for the dithering phase could be a promising regime for maximising core density, and fusion performance while minimising plasma-material interaction. The oscillatory signal during the dithering phase could be used as a precursor of undesirable plasma performance for control purposes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Fundamental factors affecting thermonuclear ignition

Recent inertial confinement fusion experiments on the National Ignition Facility (NIF) have improved performance and interpretability. These results help us address hydrodynamic efficiency, pusher adiabat, tamping, and hot-spot confinement as they pertain to criteria for ignition. Here, we present requirements for propagating burn that are stringent compared to existing literature. The effects of the pusher adiabat on the energy partition for the cold and hot DT are addressed, as well as the persistent discrepancy between the observed and simulated neutron down scattering ratio. The required energy for achieving ignition on NIF and paths forward to optimize or increase the capsule yields for given laser energy are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Advances in prediction of tokamak experiments with theory-based models

The successful validation of theory-based models of transport, MHD stability, heating and current drive, with tokamak measurements over the last 20 years, has laid the foundation for a new era where these models can be routinely used in a "predict first" approach to design and predict the outcomes of experiments on tokamaks today. The capability to predict the plasma confinement and core profiles with a quantified uncertainty, based on a multi-machine, international, database of experience, will provide confidence that a proposed discharge will remain within the operational limits of the tokamak. Developing this predictive capability for the first generation of burning plasma devices, beginning with ITER, and progressing to tokamak demonstration reactors, is a critical mission of fusion energy research. Major advances have been made implementing this predict first methodology on today's tokamaks. In this work, an overview of several of these recent advances will be presented, providing the integrated modeling foundations of the experimental successes. The first steps to include boundary plasmas, and tokamak control systems, have been made. A commitment to predicting experiments as part of the planning process is needed in order to collect predictive accuracy data and evolve the models and software into a robust whole discharge pulse design simulator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Avalanche transport of energetic-ions in magnetic confinement plasmas: nonlinear multiple wave-number simulation

Large burst activity, identified as toroidal Alfvén eigenmode (TAE) avalanche, occurs frequently in neutral-beam heated plasmas in National Spherical Torus Experiment (NSTX). Based on the typical experimental observation of TAE avalanche on NSTX, a self-consistent nonlinear multiple wave-number (k ∥ ≃ n/R, where n toroidal mode-number and R major radius) simulation associated with TAE avalanches is performed using the experimental parameters and profiles before the occurrence of TAE avalanche as the M3D-K input. The wave–wave nonlinear coupling among different modes and the resonant interaction between different modes and energetic-ions during TAE avalanches are identified in the nonlinear multiple wave-number simulations. The resonance overlap during the TAE avalanche is clearly observed in the simulation. It is found that the effective wave–wave coupling and a sufficiently strong drive are two important ingredients for the onset of TAE avalanches. TAE avalanche is considered to be a strongly nonlinear process and it is always accompanied by the simultaneous rapid frequency-chirping and large amplitude bursting of multiple modes and significant energetic-ion losses. The experimental phenomenon is observed on NSTX and is qualitatively reproduced by the simulation results in this work. These findings indicate that the onset of avalanche is triggered by nonlinearity of the system, and are also conducive to understanding the underlying mechanism of avalanche transport of energetic particles in the future burning plasmas, such as International Thermonuclear Experiment Reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

NSTX-U theory, modeling and analysis results

Here, the mission of the low aspect ratio spherical tokamak NSTX-U is to advance the physics basis and technical solutions required for optimizing the configuration of next-step steady-state tokamak fusion devices. NSTX-U will ultimately operate at up to 2 MA of plasma current and 1 T toroidal field on axis for 5 s, and has available up to 15 MW of neutral beam injection power at different tangency radii and 6 MW of high harmonic fast wave heating. With these capabilities NSTX-U will develop the physics understanding and control tools to ramp-up and sustain high performance fully non-inductive plasmas with large bootstrap fraction and enhanced confinement enabled via the low aspect ratio, high beta configuration. With its unique capabilities, NSTX-U research also supports ITER and other critical fusion development needs. Super-Alfvénic ions in beam-heated NSTX-U plasmas access energetic particle (EP) parameter space that is relevant for both α-heated conventional and low aspect ratio burning plasmas. NSTX-U can also generate very large target heat fluxes to test conventional and innovative plasma exhaust and plasma facing component solutions. This paper summarizes recent analysis, theory and modelling progress to advance the tokamak physics basis in the areas of macrostability and 3D fields, EP stability and fast ion transport, thermal transport and pedestal structure, boundary and plasma material interaction, RF heating, scenario optimization and real-time control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗