Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BEAM MONITORING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Probing Hohlraum Plasma Conditions by Neutronics From Fusion in the Hohlraum Volume

We propose a novel technique to measure the ion temperature in ignition scale hohlraums, namely by filling the hohlraum with DT gas. Quantifying the neutron production within the hohlraum volume (in space and time) will help measure the ion temperature. Varying the amount of cross beam energy transfer (CBET) is predicted to affect the ion temperature due to saturation effects. By varying CBET (via wavelength choices in the beams) we could monitor the DT production as a measure of this ion heating effect. Ion diffusion models in the simulations can also be tested in this manner.

Rosen, M. D.↗

Thermal-Expansion Measurement

Precise stable laser system determines coefficients of thermal expansion. Dual-beam interferometer arrangement monitors changes in sample length as function of temperature by following changes inoptical path lengths.

Davis, J. H.↗

High Power K Sub a -band Transmitter for Planetary Radar and Spacecraft Uplink

A proposed conceptual design of a 400 kW continuous wave (CW)K sub a band transmitter and associated microwave components to be used for planetary radar and serve as a prototype for future spacecraft uplinks is discussed. System requirements for such a transmitter are presented. Performance of the proposed high-power millimeter wave tube, the gyroklystron is discussed. Parameters of the proposed power amplifier, beam supply, and monitor and control devices are also presented. Microwave transmission line components consisting of signal monitoring devices, signal filtering devices, and an overmoded corrugated feed are discussed. Finally, an assessment of the state of the art technology to meet the system requirements is given and possible areas of difficulty are summarized.

Bhanji, A. M.↗

High power Ka-band transmitter for planetary radar and spacecraft uplink

A proposed conceptual design of a 400 kW CW Ka-Band transmitter and associated microwave components to be used for planetary radar and serve as a prototype for feature spacecraft uplinks is discussed. System requirements for such a transmitter are presented. Performance of the proposed high power millimeter wave tube, the gyroklystron, is discussed. Parameters of the proposed power amplifier, beam supply, and monitor and control devices are also presented, Microwave transmission line components consisting of signal monitoring devices, signal filtering devices, and an overmoded corrugated feed are discussed. Finally, an assessment of the state of the art technology to meet the system requirements is given and possible areas of difficulty are summarized.

Bhanji, A.M.↗

Conceptual design of high power Ka-band radar transmitter

A proposed conceptual design of a 400-kW CW Ka-band transmitter and associated microwave components to be used for planetary radar and serve as a prototype for future spacecraft uplinks is discussed. System requirements for such a transmitter are presented. Performance of the proposed high-power millimeter-wave tube, the gyroklystron, is discussed. Parameters of the proposed power amplifier, beam supply, and monitor and control devices are also presented. Microwave transmission-line components consisting of signal-monitoring devices, mode converter, and an overmoded corrugated feed are discussed. Finally, an assessment of the state-of-the-art technology to meet the system requirements is given, and possible areas of difficulty are summarized.

Bhanji, Alaudin↗

Workshop on Impulsive Solar Flares, 2nd, University of New Hampshire, Durham, Sept. 26-28, 1988, Proceedings

Papers on impulsive solar flares are presented, covering topics such as the optical properties of impulsive flares, soft X-ray spectroscopy of solar flares, the energy release process in impulsive bursts, high-velocity evaporation and a high-speed shock wave during the impulsive phase of the April 24, 1984 flare, nonpotential magnetic fields at sites of gamma-ray flares, and meter-decimeter and microwave radio observations of solar flares. Other topics include rise times in solar radio bursts, removal of the gradual component in analyses of solar impulsive bursts, ion and relativistic electron transport in solar flares, neutrons and gamma-ray emission on June 3, 1982, emission characteristics of three intense solar flares in cycle 21, and solar flare gamma-ray observations with the Hinotori satellite. Additional topics include spectra of relativistic solar proton ground-level events recorded in Antarctica, a 153-d periodicity in the occurrence of solar flares producing energetic interplanetary electrons, a search for solar neutron response in neutron monitor data, neutral beams in two-ribbon flares and in the geomagnetic tail, beam heating in solar flares, and solar flare gamma-ray line shapes.

Source record↗

Ion Milling of Sapphire

The ion milling of sapphire is a complicated operation due to several characteristics of the material itself. It is a relatively hard transparent nonconductive crystalline material that does not transfer heat nearly as well as metals that have been successfully ion milled in the past. This investigation involved designing an experimental arrangement, using existing ion milling equipment, as the precursor to figuring the surface of sapphire and other insulating optical materials. The experimental arrangement employs a laser probe beam to constantly monitor the stresses being induced in the material, as it is being ion milled. The goal is to determine if the technique proposed would indeed indicate the stress being induced in the material so that these stresses can be managed to prevent failure of the optic.

Gregory, Don A.↗

Mobile CARS - IRS Instrument for Simultaneous Spectroscopic Measurement of Multiple Properties in Gaseous Flows

This paper describes a measurement system based on the dual-pump coherent anti-Stokes Raman spectroscopy (CARS) and interferometric Rayleigh scattering (IRS) methods. The IRS measurement is performed simultaneously with the CARS measurement using a common green laser beam as a narrow-band light source. The mobile CARS-IRS instrument is designed for the use both in laboratories as well as in ground-based combustion test facilities. Furthermore, it is designed to be easily transported between laboratory and test facility. It performs single-point spatially and temporally resolved simultaneous measurements of temperature, species mole fraction of N2, O2, and H2, and two-components of velocity. A mobile laser system can be placed inside or outside the test facility, while a beam receiving and monitoring system is placed near the measurement location. Measurements in a laboratory small-scale Mach 1.6 H2-air combustion-heated supersonic jet were performed to test the capability of the system. Final setup and pretests of a larger scale reacting jet are ongoing at NASA Langley Research Center s Direct Connect Supersonic Combustor Test Facility (DCSCTF).

Bivolaru, Daniel↗

Method of aligning a laser-based radiation source

A method for temporally and spatially aligning a laser-based x-ray source and maintaining alignment is disclosed. A pump laser beam, which interacts with a plasma source to create an electron beam, is aligned with the electron beam. A scattering laser beam is overlapped with the pump laser beam at an intersection point. The pump laser beam and scattering laser beam alignments are monitored and adjusted to maintain optimal alignment during operation of the laser-based x-ray source.

Umstadter, Donald↗

Structural monitoring of filamentary composites using embedded fiber optics

The feasibility of monitoring overall integrity of structural components made of filamentary composites, by embedding optical fibers between lamina of a composite beam, is investigated using a beam constructed of Kevlar/epoxy cloth with embedded optical fibers aligned with the longitudinal axis of the beam. Phase changes were monitored in three different optical fibers as the composite beam was subjected to pure bending, and the strain response of the fibers was compared to the strain gage readings taken at the surface, showing a strong correlation between the phase change and the applied deformation.

Cashon, John L.↗

SU-E-T-625: Potential for Reduced Radiation Induced Toxicity for the Treatment of Inoperable Non-Small-Cell Lung Cancer Using RapidArc Planning

Purpose: To investigate the feasibility of using RapidArc (RA) treatment planning to reduce irradiation volume of normal lung and other organs at risk (OARs) in the treatment of inoperable non-small-cell lung cancer (NSCLC) patients. Methods: A retrospective treatment planning and delivery study was performed to compare target coverage and the volumes of the normal lung, spinal cord, heart and esophagus on 4D-CT scan above their dose tolerances delivered by RA vs. IMRT for ten inoperable NSCLC patients (Stage I-IIIB). RA plans consisted of either one-full or two-partial co-planar arcs used to treat 95% of the planning target volume (PTV) with 6MV beam to a prescription of 66Gy in 33 fractions. IMRT plans were generated using 5–7 co-planar fields with 6MV beam. PTV coverage, dose-volume histograms, homogeneity/conformity indices (CI), total number of monitor units(MUs), beam-on time and delivery accuracy were compared between the two treatment plans. Results: Similar target coverage was obtained between the two techniques. RA (CI=1.02) provided more conformal plans without loss of homogeneity compared to IMRT plans (CI=1.12). Compared to IMRT, RA achieved a significant median dose reduction in V10 (3%), V20 (8%), and mean lung dose (3%) on average, respectively. On average, V5 was comparable between the two treatment plans. RA reduced mean esophagus (6%), mean heart (18%), and maximum spinal cord dose (7%), on average, respectively. Total number of MUs and beam-on time were each reduced almost by a factor of 2 when compared to IMRT-patient comfort, reduced intra-fraction-motion and leakage dose. The average IMRT and RA QA pass rate was about 98% for both types of plans for 3%/3mm criterion. Conclusion: Compared to IMRT plans, RA provided not only comparable target coverage, but also improved conformity, treatment time, and significant reduction in irradiation of OARs. This may potentially allow for target dose escalation without increase in normal tissue toxicity.

61 RADIATION PROTECTION AND DOSIMETRY↗

Studies of Nuclear Effects and Charge Symmetry Violation using a Deuterium Target in MINER$v$A

Neutrino scattering provides a powerful experimental tool for studying the basic structure of protons and neutrons in terms of both the parton distributions functions (PDFs) of deep inelastic scattering and the form factors of elastic scattering. While scattering with charged lepton beams cannot distinguish between quark flavors, neutrino and anti-neutrino scattering can separate individual quark flavors and quarks from anti-quarks. While this has been recognized for many years, the full power of neutrino scattering has not yet been fully realized. Most neutrino scattering experiments have been performed on heavy nuclei in order to increase the interaction rates and provide adequate statistical precision, and the utilization of such data in determining PDFs from global fits has been hampered by the possibly large and unknown nuclear effects in neutrino scattering (sections II.I and II.2). While significant progress has been made in producing high intensity, energy-selected neutrino beams, as well as methods for both the monitoring and determination of the beam flux, essentially no new experiments have been performed on deuterium or hydrogen targets in nearly 25 years. The availability of the high intensity NuMI beam at Fermilab provides a unique opportunity to address fundamental questions concerning the quark structure of the nucleon and to unravel the physics underlying the nuclear dependence of neutrino scattering. We propose to fill the existing MINER$v$A cryogenic target with liquid deuterium to take advantage of this opportunity. The high intensity neutrino and anti-neutrino beams from the Fermilab NuMI facility, especially after upgrades for NOvA and the addition of deuterium to the existing MINERvA targets of carbon, iron, lead, water, scintillator and the aluminum of the cryostat, allow for the highest precision nuclear to deuterium ratio (A/D) measurements via flavor sensitive weak interactions with a range of different atomic numbers and nuclear densities. The expected statistics from this data could provide ratios of iron to deuterium structure functions at the 3% uncertainty from 0.05 < $x$ < 0.6 in neutrino/ antineutrino mode (section IV.I), and the ability to see charge symmetry violation at the 3% level in the same $x$ range (section IV.2). The physics payoff for this effort is the inclusion of neutrino constraints on sea and low-$x$ valence quarks in the nucleon to the global PDF fits, and an independent measure of charge-symmetry violations in parton distributions, which may be the source of the difference between the Weinberg angle measured by the NuTeV collaboration and the standard model prediction.

Contractor, Fermilab↗

Formation and atomic force spectroscopy of AlGaN/GaN nanoheterostructures

A procedure of production of Group-III nitride layers with a reduced number of defects is developed. The procedure is based on molecular-beam epitaxy with simultaneous monitoring of the surface by scanning electron microscopy. It is established that the layer structural quality assessed from the number of surface defects directly corresponds to the characteristics of the two-dimensional electron gas in the resulting heterostructures. The effect of doping of the AlGaN barrier layer with donor impurities on the characteristics of the two-dimensional electron gas is considered.

36 MATERIALS SCIENCE↗

Measurement of Neutron Induced Fission of 235 U, 233 U and 245 Cm with the FIC Detector at the CERN n_TOF Facility

A series of measurements of neutron induced fission cross section of various TRU isotopes have been performed at the CERN n{_}TOF spallation neutron facility, in the energy range from thermal to nearly 250 MeV. The experimental apparatus consists in a fast ionization chamber (FIC), used as a fission fragment detector with a high efficiency. Good discrimination between alphas and fission fragments can be obtained with a simple amplitude threshold. In order to allow the monitoring of the neutron beam and to extract the n{_}TOF neutron flux, the well known cross section of the {sup 235}U(n,f) reaction, considered as a fission standard, has been used. Preliminary results for the cross section are shown for some selected isotopes such as {sup 235}U, {sup 233}U and {sup 245}Cm in the energy range from 0.050 eV to about 2 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measuring the NuMI Beam Flux for MINERvA

MINERvA is employing multiple tools to understand its neutrino beam flux. We utilize external hadron production data, but we also depend heavily on in situ techniques in which we reduce our hadron production uncertainties by tuning our Monte Carlo to both MINERvA detector data and muon monitor data.

43 PARTICLE ACCELERATORS↗

ATLAS DBM Module Qualification

This is a technical scope of work (TSW) between the Fermi National Accelerator Laboratory (Fermilab) and the experimenters of Jozef Stefan Institute, CERN, and University of Toronto who have committed to participate in beam tests to be carried out during the 2014 Fermilab Test Beam Facility program. Chemical Vapour Deposition (CVD) diamond has a number of properties that make it attractive for high energy physics detector applications. Its large band-gap (5.5 eV) and large displacement energy (42 eV/atom) make it a material that is inherently radiation tolerant with very low leakage currents and high thermal conductivity. CVD diamond is being investigated by the RD42 Collaboration for use very close to LHC interaction regions, where the most extreme radiation conditions are found. This document builds on that work and proposes a highly spatially segmented diamond-based luminosity monitor to complement the time-segmented ATLAS Beam Conditions Monitor (BCM) so that, when Minimum Bias Trigger Scintillators (MTBS) and LUCID (LUminosity measurement using a Cherenkov Integrating Detector) have difficulty functioning, the ATLAS luminosity measurement is not compromised.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗