Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Single particle detection: Phase control in submicron Hall sensors

We present a phase-sensitive ac-dc Hall magnetometry method which allows a clear and reliable separation of real and parasitic magnetic signals of a very small magnitude. High-sensitivity semiconductor-based Hall crosses are generally accepted as a preferential solution for non-invasive detection of superparamagnetic nanobeads used in molecular biology, nanomedicine, and nanochemistry. However, detection of such small beads is often hindered by inductive pick-up and other spurious signals. The present work demonstrates an unambiguous experimental route for detection of small magnetic moments and provides a simple theoretical background for it. The reliability of the method has been tested for a variety of InSb Hall sensors in the range 600 nm-5 {mu}m. Complete characterization of empty devices, involving Hall coefficients and noise measurements, has been performed and detection of a single FePt bead with diameter of 140 nm and magnetic moment of {mu}{approx_equal}10{sup 8} {mu}{sub B} has been achieved with a 600 nm-wide sensor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GaSb/GaP compliant interface for high electron mobility AlSb/InAs heterostructures on (001) GaP

We report on the epitaxial growth of an AlSb/InAs heterostructure on a (001) GaP substrate. We investigate the conditions for the most efficient relaxation of GaSb islands on GaP. In particular, we show that the GaP surface treatment and the growth temperature are crucial for the formation of a two-dimensional periodic array of 90 deg. misfit dislocations at the episubstrate interface. With this relaxation process, an AlSb/InAs heterostructure exhibiting a room temperature mobility of 25 500 cm{sup 2} V{sup -1} s{sup -1} on GaP is demonstrated. This result paves the way to the integration of Sb-based devices on Si substrates through the use of GaP/Si templates.

36 MATERIALS SCIENCE↗

Alloy Semiconductor Crystal Growth Under Microgravity

Microgravity studies on the dissolution and crystallization of In{sub x}Ga{sub 1-x}Sb have been done using a sandwich combination of InSb and GaSb as the starting material using the Chinese recoverable satellite. The same type of experiment was performed under 1G gravity condition for comparison. From these experiments and the numerical simulation, it is found that the shape of the solid/liquid interface and composition profile in the solution was found to be significantly affected by gravity. GaSb seed was dissolved faster than GaSb feed even though the GaSb feed temperature was higher than that of GaSb seed temperature. These results clearly indicate that solute transport due to gravity affects dissolution and growth processes of alloy semiconductor bulk crystals.

36 MATERIALS SCIENCE↗

Neutron diffraction studies on the Heusler alloy Ni{sub 50}Mn{sub 37}Sb{sub 13}

The evolution of martensitic to austenitic transformation in Ni{sub 50}Mn{sub 37}Sb{sub 13} has been studied usingtemperature dependent neutron diffraction, thermal property, and magnetization studies. Differential scanning calorimetric studies reveal a martensitic transformation T{sub M} around 291 K. The magnetization data yield a ferromagnetic ordering temperature of 329 K in the austenitic phase and 230 K in the martensitic phase. The analysis of the powder neutron diffraction data in the temperature range of 325-12 K indicates a structural transition from a high temperature cubic L2{sub 1} type structure to an orthorhombic structure. At 270 K, both cubic and orthorhombic phases coexist. Anisotropic unit cell changes are observed at the martensitic transformation: The unit cell expands by about 1.5% along the a axis, by about 2.5% along the c axis, and compresses by about 4.28% along the b axis. Both cubic and orthorhombic phases show commensurate collinear ferromagnetic ordering with a magnetic moment of {approx}3.67 {mu}{sub B}/Mn in Mn (2a and 2f) sites.

36 MATERIALS SCIENCE↗

Enhanced thermoelectric performance in p-type BiSbTe bulk alloy with nanoinclusion of ZnAlO

p-type BiSbTe/x wt % ZnAlO (x=0, 0.25, 0.5, 0.75, and 1.0) composites were prepared by zone melting method. A peak thermoelectric figure of merit (ZT) of 1.33 at 370 K was achieved for the sample with x=0.75, about 34% higher than that of BiSbTe at the same temperature, making these composites more attractive for commercial applications. This enhancement of ZT can be mainly ascribed to a remarkable increase of the electrical conductivity and a simultaneous decrease of the lattice thermal conductivity by the introduction of ZnAlO nanopowder.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of metamorphic AlInSb/GaInSb high-electron-mobility-transistor structures on GaAs substrates for low power and high frequency applications

We report on molecular beam epitaxial growth of AlInSb/GaInSb metamorphic high-electron-mobility-transistor structures for low power, high frequency applications on 4 in. GaAs substrates. The structures consist of a Ga{sub 0.4}In{sub 0.6}Sb channel embedded in Al{sub 0.4}In{sub 0.6}Sb barrier layers which are grown on top of an insulating metamorphic buffer, which is based on the linear exchange of Ga versus In and a subsequent exchange of As versus Sb. Precise control of group V fluxes and substrate temperature in the Al{sub 0.4}In{sub 0.6}As{sub 1-x}Sb{sub x} buffer is essential to achieve high quality device structures. Good morphological properties were achieved demonstrated by the appearance of crosshatching and root mean square roughness values of 2.0 nm. Buffer isolation is found to be >100 k{Omega}/{open_square} for optimized growth conditions. Hall measurements at room temperature reveal electron densities of 2.8x10{sup 12} cm{sup -2} in the channel at mobility values of 21.000 cm{sup 2}/V s for single-sided Te volume doping and 5.4x10{sup 12} cm{sup -2} and 17.000 cm{sup 2}/V s for double-sided Te {delta}-doping, respectively.

36 MATERIALS SCIENCE↗

Strain relief and AlSb buffer layer morphology in GaSb heteroepitaxial films grown on Si as revealed by high-angle annular dark-field scanning transmission electron microscopy

The interfacial misfit (IMF) dislocation array of an epitaxial GaSb film on a Si substrate has been imaged with high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). The mismatch strain accommodation through dislocation formation has been investigated using geometric phase analysis (GPA) on HAADF-STEM images with atomic resolution to probe the defects' local strain distribution. These measurements indicate that the lattice parameter of the epitaxial film recovers its bulk value within three unit cells from the interface due to the relaxation through IMF dislocations. The atomic number contrast of the HAADF-STEM images and energy dispersive x-ray spectrometry illustrate the formation of islands of AlSb buffer layer along the interface. The role of the AlSb buffer layer in facilitating the GaSb film growth on Si is further elucidated by investigating the strain field of the islands with the GPA.

36 MATERIALS SCIENCE↗

Great thermoelectric power factor enhancement of CoSb{sub 3} through the lightest metal element filling

Lithium, the lightest metal element with a small ionic radius, is successfully filled into the voids of CoSb{sub 3} by utilizing the high pressure synthesis technique. The synthesized Li{sub 0.4}Co{sub 4}Sb{sub 12} shows the largest thermoelectric power factor of 6000 {mu}W m{sup -1} K{sup -2} among all elemental filled CoSb{sub 3} materials. This significantly enhanced thermoelectric power factor is attributed to the large carrier mobility of Li{sub 0.4}Co{sub 4}Sb{sub 12}, 61 cm{sup 2} V{sup -1} s{sup -1}, featuring a good electron crystal property for the Li-filled CoSb{sub 3} samples.

36 MATERIALS SCIENCE↗

GaSb molecular beam epitaxial growth on p-InP(001) and passivation with in situ deposited Al{sub 2}O{sub 3} gate oxide

The integration of high carrier mobility materials into future CMOS generations is presently being studied in order to increase drive current capability and to decrease power consumption in future generation CMOS devices. If III-V materials are the candidates of choice for n-type channel devices, antimonide-based semiconductors present high hole mobility and could be used for p-type channel devices. In this work we first demonstrate the heteroepitaxy of fully relaxed GaSb epilayers on InP(001) substrates. In a second part, the properties of the Al{sub 2}O{sub 3}/GaSb interface have been studied by in situ deposition of an Al{sub 2}O{sub 3} high-{kappa} gate dielectric. The interface is abrupt without any substantial interfacial layer, and is characterized by high conduction and valence band offsets. Finally, MOS capacitors show well-behaved C-V with relatively low D{sub it} along the bandgap, these results point out an efficient electrical passivation of the Al{sub 2}O{sub 3}/GaSb interface.

36 MATERIALS SCIENCE↗

The Crystallization Behavior of Stochiometric and Off-stochiometric Ga-Sb-Te Materials for Phase-Change Memory

The stoichiometric Ga{sub 4}Sb{sub 6}Te{sub 3} and Ga-Sb materials were systematically studied. The alloy Ga{sub 4}Sb{sub 6}Te{sub 3} shows a fast crystallization speed, very high crystallization temperature, T{sub x}, and high electrical contrast. Although stoichiometric GaSb has similar performance and even faster crystallization speed, the electrical contrast is much lower. The other off-stoichiometric compounds we studied all have higher T{sub x} than Ge{sub 2}Sb{sub 2}Te{sub 5} indicating a good amorphous stability. By raising the Sb/Te ratio with GaSb incorporation, T{sub x} and the recrystallization time of melt-quenched, amorphous samples can be effectively increased. The stoichiometric Ga{sub 4}Sb{sub 6}Te{sub 3} with less likelihood of phase-segregation compared to nonstoichiometric compounds is a promising candidate for phase-change memory.

36 MATERIALS SCIENCE↗

Effect of dislocation density on thermal boundary conductance across GaSb/GaAs interfaces

We report on the thermal boundary conductance across structurally-variant GaSb/GaAs interfaces characterized by different dislocations densities, as well as variably-rough Al/GaSb interfaces. The GaSb/GaAs structures are epitaxially grown using both interfacial misfit (IMF) and non-IMF techniques. We measure the thermal boundary conductance from 100 to 450 K with time-domain thermoreflectance. The thermal boundary conductance across the GaSb/GaAs interfaces decreases with increasing strain dislocation density. We develop a model for interfacial transport at structurally-variant interfaces in which phonon propagation and scattering parallels photon attenuation. We find that this model describes the measured thermal boundary conductances well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion-beam-induced damage formation in CdTe

Damage formation in <111>- and <112>-oriented CdTe single crystals irradiated at room temperature and 15 K with 270 keV Ar or 730 keV Sb ions was investigated in situ using Rutherford backscattering spectroscopy (RBS) in channeling configuration. Defect profiles were calculated from the RBS spectra using the computer code DICADA and additional energy-dependent RBS measurements were performed to identify the type of defects. At both temperatures no formation of a buried amorphous layer was detected even after prolonged irradiation with several 10{sup 16} ions/cm{sup 2}. The fact that CdTe is not rendered amorphous even at 15 K suggests that the high resistance to amorphization is caused by the high ionicity of CdTe rather than thermal effects. The calculated defect profiles show the formation of a broad defect distribution that extends much deeper into the crystal than the projected range of the implanted ions at both temperatures. The post-range defects in CdTe thus do not seem to be of thermal origin either, but are instead believed to result from migration driven by the electronic energy loss.

36 MATERIALS SCIENCE↗

Electronic structure of Pt based topological Heusler compounds with C1{sub b} structure and 'zero band gap'

Besides of their well-known wide range of properties it was recently shown that many of the heavy Heusler semiconductors with 1:1:1 composition and C1{sub b} structure exhibit a zero band gap behavior and are topological insulators induced by their inverted band structure. In the present study, the electronic structure of the Heusler compounds PtYSb and PtLaBi was investigated by bulk sensitive hard x-ray photoelectron spectroscopy. The measured valence band spectra are clearly resolved and in well agreement to the first-principles calculations of the electronic structure of the compounds. The experimental results give clear evidence for the zero band gap state.

36 MATERIALS SCIENCE↗

Magnetic order near 270 K in mineral and synthetic Mn{sub 2}FeSbO{sub 6} ilmenite

The structural and magnetic properties of Mn{sub 2}FeSbO{sub 6} single-crystalline mineral and ceramic samples synthesized under thermobaric treatment have been investigated, and compared to theoretical predictions based on first-principles electronic structure calculations. This ilmenite system displays a sharp magnetic transition just below the room temperature related to a ferrimagnetic ordering of the Mn{sup 2+} and Fe{sup 3+} cations, which makes Mn{sub 2}FeSbO{sub 6} a promising candidate for designing functional magnetic materials.

36 MATERIALS SCIENCE↗

Anisotropy induced large exchange bias behavior in ball milled Ni-Co-Mn-Sb alloys

We report the effect of decrease in the grain size on the structural, magnetic and exchange bias (EB) behavior in ball milled Ni{sub 50-x}Co{sub x}Mn{sub 38}Sb{sub 12} (x=0 and 5) Heusler alloys. The existence of a wide range of grain sizes in the ball milled samples results in dramatic changes in the structural and magnetic properties. For x=0, a large EB field of 3.2 kOe is observed in the ball milled sample, compared to a value of 245 Oe of the bulk sample. This increase is attributed to the enhanced exchange coupling between the soft and hard magnetic particles.

36 MATERIALS SCIENCE↗

Phase change behavior in titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films

The titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films were deposited on Si(100) substrates by comagnetron sputtering method. The titanium concentrations in those films were determined by x-ray photoelectron spectroscopy. The influence of Ti doping upon phase change characteristics of the samples has been investigated by x-ray diffraction and a temperature-regulable UVISEL typed spectroscopic ellipsometry. With the augmentation of Ti doping concentration, the crystalline temperatures of the films went up while annealing, and the face-centered-cubic phase of them had high thermal stability because of the bond making between Ti and Te elements partly.

36 MATERIALS SCIENCE↗

Spectroscopic Study of (two-dimensional) Molecule-based Magnets: [MII(TCNE)(NCMe)2][SbF6] (M = Fe Mn Ni)

The M-[TCNE] (M = 3d metal; TCNE = tetracyanoethylene) system is one of the most interesting classes of molecule-based magnets, exhibiting a plethora of compositions and structures (inorganic polymer chains, 2D layers, 3D networks, and amorphous solids) with a wide range of magnetic ordering temperatures (up to 400 K). A systematic study of vibrational (both infrared and, for the first time, Raman) properties of the family of new TCNE-based magnets of M{sup II}(TCNE) (NCMe){sub 2}[SbF{sub 6}] [M = Mn, Fe, Ni] composition is discussed in conjunction with their magnetic behavior and newly resolved crystal structures. The vibrational properties of the isolated TCNE{sup {sm_bullet}-} anion in the paramagnetic Bu{sub 4}N [TCNE{sup {sm_bullet}-}] salt and recently characterized 2D layered magnet Fe{sup II}(TCNE)(NCMe){sub 2}[FeCl{sub 4}] are also reported for comparison. Additionally, a linear correlation between {nu}{sub c=c} (a{sub g}) frequency of the TCNE ligand and its formal charge Z (the spin density on the {pi}* orbital), Z = [1571 - {nu}{sub C=C} (ag)]/154.5 [e], is presented. It is shown that monitoring Z by Raman spectroscopy is of great use in providing information that allows understanding the peculiarity of the superexchange interaction in M-[TCNE] magnets and establishing the structure-magnetic properties correlations in this class of magnetic material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly-enhanced reflow characteristics of sputter deposited Cu alloy thin films for large scale integrated interconnections

An attempt to improve the reflow characteristics of sputtered Cu films was made by alloying the Cu with various elements. We selected Y, Sb, Nd, Sm, Gd, Dy, In, Sn, Mg, and P for the alloys, and ''the elasto-plastic deformation behavior at high temperature'' and ''the filling level of Cu into via holes'' were estimated for Cu films containing each of these elements. From the results, it was found that adding a small amount of Sb or Dy to the sputtered Cu was remarkably effective in improve the reflow characteristics. The microstructure and imperfections in the Cu films before and after high-temperature high-pressure annealing were investigated by secondary ion micrographs and positron annihilation spectroscopy. The results imply that the embedding or deformation mechanism is different for the Cu-Sb alloy films compared to the Cu-Dy alloy films. We consider that the former is embedded by softening or deformation of the Cu matrix, which has a polycrystalline structure, and the latter is embedded by grain boundary sliding.

36 MATERIALS SCIENCE↗