Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Ion microprobe magnesium isotope analysis of plagioclase and hibonite from ordinary chondrites

Ion and electron microprobes were used to examine Mg-26 excesses from Al-26 decay in four Al-rich objects from the type 3 ordinary hibonite clast in the Dhajala chondrite. The initial Al-26/Al-27 ratio was actually significantly lower than Al-rich inclusions in carbonaceous chondrites. Also, no Mg-26 excesses were found in three plagioclase-bearing chondrules that were also examined. The Mg-26 excesses in the hibonite chondrites indicated a common origin for chondrites with the excesses. The implied Al-26 content in a proposed parent body could not, however, be confirmed as a widespread heat source in the early solar system.

Hinton, R. W.↗
NASA NTRS1984

Chondrule rims and interchondrule matrix in UOC

Opaque rims around chondrules and clasts were distinguished from opaque, interchondrule matrix apparently unrelated spatially to chondrules and clasts. Microprobe and electron microscope techniques were used. The mean chemical composition for dark rim and matrix in Bishunpur and Tieschitz are similar to the opaque matrix of Huss, et al. However, the mean dark rim compositions in Bishunpur have significantly higher Fe, and lower Na, K, Al and Si than opaque interchondrule matrix. The opaque matrix of Huss, et al, essentially lies between these compositions. In Tieschitz only rim material was observed. In Tieschitz the rims are Si-poor and dominated by normative olivine (Fo50). Again there is an Na, K, Al component but is often nepheline normative rather than albitic. It too is probably present as glass, Ashworth (pers.comm.). In Bishunpur rims as well as the silicate-FeS, FeNi layering described by Allen, et al, discontinuous layering was observed within the silicate portion. This is apparently due to variations in the proportions of the components, particularly in the glassy phase. In Bishunpur there is a strong genetic link between matrix and rims, although rims seem to have formed under different, possibly more oxidizing, conditions. Also the presence of the same component in rims, matrix chondrules, and clasts suggests a common source.

Alexander, C.↗
NASA NTRS1987

Plagioclase-rich inclusions in carbonaceous chondrite meteorites - Liquid condensates?

The characteristics and formation of coarse-grained, plagioclase-rich inclusions are investigated. The textures, mineralogical compositions, and initial Al-26/Al-27 ratios for the plagioclase-rich inclusions are described. It is observed that plagioclase-rich inclusions in carbonaceous chondrites are either Ca-Al-rich inclusions (CAIs) composed of 30-60 vol pct anorthite, and less than 35 vol pct Ti-Al-pyroxene and melilite, or CA chondrites composed of plagioclase, pyroxene, olivine, spinel, and melilite. It is observed that CA chondrules are chemically and mineralogically the most similar components shared by carbonaceous and ordinary chondrites. The textural changes observed in the inclusions are examined. The data reveal that the CAIs have three textural groups: coarse anorthite laths, equigranular anorthite and Ti-Al-pyroxene, and lacy Ti-Al-pyroxene and fine-grained anorthite.

Wark, D. A.↗
NASA NTRS1988

Chromic acid anodizing of aluminum foil

The success of the Space Station graphite/epoxy truss structure depends on its ability to endure long-term exposure to the LEO environment, primarily the effects of atomic oxygen and the temperture cycling resulting from the 94 minute orbit. This report describes the development and evaluation of chromic acid anodized (CAA) aluminum foil as protective coatings for these composite tubes. Included are: development of solar absorptance and thermal emittance properties required of Al foil and development of CAA parameters to achieve these optical properties; developing techniques to CAA 25 ft lengths of Al foil; developing bonding processes for wrapping the Al foil to graphite/epoxy tubes; and atomic oxygen testing of the CAA Al foil. Two specifications were developed and are included in the report: Chromic Acid Anodizing of Aluminum Foil Process Specification and Bonding of Anodized Aluminum Foil to Graphite/Epoxy Tubes. Results show that CAA Al foil provides and excellent protective and thermal control coating for the Space Station truss structure.

Dursch, H.↗
NASA NTRS1988

The distribution of IRAS galaxies towards the Bootes void

A redshift survey was completed for 342 galaxies detected by the IRAS in the direction of the Bootes void discovered by Kirshner et al. The number density of IRAS galaxies is well determined from the shallower full-sky redshift survey of Strauss et al. Four IRAS galaxies are found within the void as defined by Kirshner et al., of which three are part of a complete sample, implying a density depression of a factor of 4. The underdense region continues to a distance of at least 4000 km/s from the nominal center of the void. Three of the IRAS galaxies studied in this paper were previously unknown. These galaxies have emission-line spectra characteristic of H II regions, and red continuum magnitudes ranging from 16 to 17.5 mag, and thus are bright enough to have been detected in a wide-angle redshift survey as deep as that of Kirshner et al. The luminosity function derived from this sample is in good agreement with that of Lawrence et al.

Strauss, Michael A.↗
NASA NTRS1989

Three ages of Venus

A central question for any planet is the age of its surface. Based on comparative planetological arguments, Venus should be as young and active as the Earth (Wood and Francis). The detection of probable impact craters in the Venera radar images provides a tool for estimating the age of the surface of Venus. Assuming somewhat different crater production rates, Bazilevskiy et al. derived an age of 1 + or - 0.5 billion years, and Schaber et al. and Wood and Francis estimated an age of 200 to 400 million years. The known impact craters are not randomly distributed, however, thus some area must be older and others younger than this average age. Ages were derived for major geologic units on Venus using the Soviet catalog of impact craters (Bazilevskiy et al.), and the most accessible geologic unit map (Bazilevskiy). The crater counts are presented for (diameters greater than 20 km), areas, and crater densities for the 7 terrain units and coronae. The procedure for examining the distribution of craters is superior to the purely statistical approaches of Bazilevskiy et al. and Plaut and Arvidson because the bins are larger (average size 16 x 10(6) sq km) and geologically significant. Crater densities define three distinct groups: relatively heavily cratered (Lakshmi, mountain belts), moderately cratered (smooth and rolling plains, ridge belts, and tesserae), and essentially uncratered (coronae and domed uplands). Following Schaber et al., Grieve's terrestrial cratering rate of 5.4 + or - 2.7 craters greater than 20 km/10(9) yrs/10(6) sq km was used to calculate ages for the geologic units on Venus. To improve statistics, the data was aggregated into the three crater density groups, deriving the ages. For convenience, the three similar age groups are given informal time stratigraphic unit names, from youngest to oldest: Ulfrunian, Sednaian, Lakshmian.

Wood, Charles A.↗
NASA NTRS1990

Gas flows in S-E binary systems of galaxies

Tidal interaction between the galaxies in binary systems leads to important consequences. Some peculiarities in galactic morphology as well as the transfer of matter from one galaxy to another may be due to this factor. In particular, gas flows in intergalactic space may be formed. Such flows enriching one component with gas from the other may play a substantial role in the evolution of mixed (S-E) pairs. One can mention several facts corroborating the possibility of the gas transfer from the spiral to the elliptical galaxy. High HI content (10(exp 7) to 10(exp 9) solar mass) is detected in nearly 40 E galaxies (Bottinelli and Gougenheim, 1979; Knapp et al., 1985). Such galaxies are often members of pairs or of multiple systems including an S galaxy, which may be the source of gas (Smirnov and Komberg, 1980). Moreover, the gas kinematics and its distribution also indicate an external origin for this gas (Knapp et al., 1985). In many cases there is an outer gaseous disk. The directions of the disk and of stellar rotation don't always coincide (van Gorkom et al., 1985; Varnas et al., 1987). The galaxy colors in S-E pairs are correlated (the Holmberg effect): bluer ellipticals have spiral components that are usually bluer (Demin et al., 1984). The fraction of E galaxies with emission lines (N sub em) in S-E pairs showing traces of tidal interaction is twice as large (N sub em approx. equals 0.24) as in pairs without interaction (N sub em approx. equals 0.12) (Sotnikova, 1988b). Since the presence of emission lines in a galaxy spectrum strongly depends on gas content, this fact also leads to the conclusion that ellipticals in interacting S-E pairs are enriched with gas. These facts may be considered as a serious indication of the existence of gas transfer. Hence, investigation of this process is of interest.

Sotnikova, N. YA.↗
NASA NTRS1991

Advanced information processing system for advanced launch system: Avionics architecture synthesis

The Advanced Information Processing System (AIPS) is a fault-tolerant distributed computer system architecture that was developed to meet the real time computational needs of advanced aerospace vehicles. One such vehicle is the Advanced Launch System (ALS) being developed jointly by NASA and the Department of Defense to launch heavy payloads into low earth orbit at one tenth the cost (per pound of payload) of the current launch vehicles. An avionics architecture that utilizes the AIPS hardware and software building blocks was synthesized for ALS. The AIPS for ALS architecture synthesis process starting with the ALS mission requirements and ending with an analysis of the candidate ALS avionics architecture is described.

Lala, Jaynarayan H.↗
NASA NTRS1992

Venusian hydrology: Steady state reconsidered

In 1987, Grinspoon proposed that the data on hydrogen abundance, isotopic composition, and escape rate were consistent with the hypothesis that water on Venus might be in steady state rather than monotonic decline since the dawn of time. This conclusion was partially based on a derived water lifetime against nonthermal escape of approximately 10(exp 8) yr. De Bergh et al., preferring the earlier Pioneer Venus value of 200 ppm water to the significantly lower value detected by Bezard et al., found H2O lifetimes of greater than 10(exp 9) yr. Donahue and Hodges derived H2O lifetimes of 0.4-5 x 10 (exp 9) yr. Both these analyses used estimates of H escape flux between 0.4 x 10(exp 7) and 1 x 10(exp 7) cm(exp -2)s(exp -1) from Rodriguez et al. Yet in more recent Monte Carlo modeling, Hodges and Tinsley found an escape flux due to charge exchange with hot H(+) of 2.8 x 10(exp 7) cm(exp -2)s(exp -1). McElroy et al. estimated an escape flux of 8 x 10(exp 6) cm(exp -2)s(exp -1) from collisions with hot O produced by dissociative recombination of O2(+). Brace et al. estimated an escape flux of 5 x 10(exp 6) cm(exp -2)s(exp -1) from ion escape from the ionotail of Venus. The combined estimated escape flux from all these processes is approximately 4 x 10(exp 7) cm(exp -2)s(exp -1). The most sophisticated analysis to date of near-IR radiation from Venus' nightside reveals a water mixing ratio of approximately 30 ppm, suggesting a lifetime against escape for water of less than 10(exp 8) yr. Large uncertainties remain in these quantities, yet the data point toward a steady state. Further evaluation of these uncertainties, and new evolutionary modeling incorporating estimates of the outgassing rate from post-Magellan estimates of the volcanic resurfacing rate are presented.

Grinspoon, David H.↗
NASA NTRS1993

Advanced Launch System Multi-Path Redundant Avionics Architecture Analysis and Characterization

The objective of the Multi-Path Redundant Avionics Suite (MPRAS) program is the development of a set of avionic architectural modules which will be applicable to the family of launch vehicles required to support the Advanced Launch System (ALS). To enable ALS cost/performance requirements to be met, the MPRAS must support autonomy, maintenance, and testability capabilities which exceed those present in conventional launch vehicles. The multi-path redundant or fault tolerance characteristics of the MPRAS are necessary to offset a reduction in avionics reliability due to the increased complexity needed to support these new cost reduction and performance capabilities and to meet avionics reliability requirements which will provide cost-effective reductions in overall ALS recurring costs. A complex, real-time distributed computing system is needed to meet the ALS avionics system requirements. General Dynamics, Boeing Aerospace, and C.S. Draper Laboratory have proposed system architectures as candidates for the ALS MPRAS. The purpose of this document is to report the results of independent performance and reliability characterization and assessment analyses of each proposed candidate architecture and qualitative assessments of testability, maintainability, and fault tolerance mechanisms. These independent analyses were conducted as part of the MPRAS Part 2 program and were carried under NASA Langley Research Contract NAS1-17964, Task Assignment 28.

Baker, Robert L.↗
NASA NTRS1993

A search for noble-gas evidence for presolar oxide grains

Early results from an ongoing search for isotopically distinctive noble gases as evidence for presolar oxide grains are presented. With some qualifications, we do not see such evidence in spinel rich acid residue fractions from the Allende meteorite. We remain hopeful that less abundant mineral separates may yet be fruitful. Presolar grains, micro-diamonds, silicon carbide, and graphite, were found in primitive meteorites. While the abundances of these three refractory C rich grains are low, a few hundred ppm, a few ppm, & less than 1 ppm, respectively in primitive meteorites, they are tagged with high concentrations of isotopically anomalous noble gas components, Xe-HL, KR & Xe-s and Ne-E(H), and Ne-E(L). These tags have served as tracers and allowed the development of techniques for their purification and eventual identification. One might expect similar amounts of refractory presolar oxides to have survived, but so far only three cases exist for their identification. The first two cases are individual corundum oxide grains. Huss et al. found one such grain from an Orgueil residue with an Al-26/Al-27 ratio of 8.9 x 10(exp -5), about 18 times higher than the canonical initial solar system value. The second corundum grain, from Murchison, was found by Nittler et al. to have unusual oxygen in addition to a similar Al-26/Al-27 ratio of 8.7 x 10(exp -4). The oxygen was depleted in O-18 by 22 percent and enriched in O-17 by a factor of 2. The third case is a measurement by Zinner et al. on an aggregate of fine grained spinels from a Murray residue with an O-17 enrichment and a possible O-18 depletion similar to the second grain, but much subdued. This is consistent with a few such presolar grains diluted by a much larger population of isotopically normal corundum grains and an even larger number of normal spinel grains.

Lewis, Roy S.↗
NASA NTRS1994

Voyager measurements of the isotopic composition of cosmic-ray aluminum and implications for the propagation of cosmic rays

We report a new measurement of the cosmic-ray isotopic composition of aluminum in the low-energy range form 75 to 206 MeV per nucleon.This measurement was made using the high-energy telescope of the CRS experiment on the Voyager 1 and 2 spacecraft during the time period from 1977 to 1993 with an average solar modulation level about 497 MV, roughly the same as at Earth near sunspot minimum. We obtain approximately 430 Al events of which approximately 35 are Al-26 and 395 are Al-27. The Al isotopes were separated with an average mass resolution sigma of 0.35 amu. Our interpretation of the isotopic composition of cosmic-ray aluminum is based on a standard Leaky-Box model for the interstellar propagation of cosmic-ray nuclei using the latest cross sections of the New Mexico-Saclay collaboration as well as a disk-halo diffusion model. From our observed ratio Al-26/Al-27 of 8.3 +/- 2.4 % we deduce an average interstellar density of about 0.52 (+0.26, -0.2) atoms per cu cm. This density is larger than the value of 0.28 (+0.14, -0.11) atoms per cu cm we found from an analysis of the observed abundance of the longer lived Be-10 made using data from the Voyager detectors over almost the same time interval and using essentially the same propagation program.

Lukasiak, A.↗
NASA NTRS1994

Decaying neutrinos in galaxy clusters

Davidsen et al. (1991) have argued that the failure to detect UV photons from the dark matter (DM) in cluster A665 excludes the decaying neutrino hypothesis. Sciama et al. (1993) argued that because of high central concentration the DM in that cluster must be baryonic. We study the DM profile in clusters of galaxies simulated using the Harrison-Zel'dovich spectrum of density fluctuations, and an amplitude previously derived from numerical simulations (Melott 1984b; Anninos et al. 1991) and in agreement with microwave background fluctuations (Smoot et al. 1992). We find that with this amplitude normalization cluster neutrino DM densities are comparable to observed cluster DM values. We conclude that given this normalization, the cluster DM should be at least largely composed of neutrinos. The constraint of Davidsen et al. can be somewhat weakened by the presence of baryonic DM; but it cannot be eliminated given our assumptions.

Melott, Adrian L.↗
NASA NTRS1994

Cosmic microwave background anisotropies in cold dark matter models with cosmological constant: The intermediate versus large angular scales

We obtain predictions for cosmic microwave background anisotropies at angular scales near 1 deg in the context of cold dark matter models with a nonzero cosmological constant, normalized to the Cosmic Background Explorer (COBE) Differential Microwave Radiometer (DMR) detection. The results are compared to those computed in the matter-dominated models. We show that the coherence length of the Cosmic Microwave Background (CMB) anisotropy is almost insensitive to cosmological parameters, and the rms amplitude of the anisotropy increases moderately with decreasing total matter density, while being most sensitive to the baryon abundance. We apply these results in the statistical analysis of the published data from the UCSB South Pole (SP) experiment (Gaier et al. 1992; Schuster et al. 1993). We reject most of the Cold Dark Matter (CDM)-Lambda models at the 95% confidence level when both SP scans are simulated together (although the combined data set renders less stringent limits than the Gaier et al. data alone). However, the Schuster et al. data considered alone as well as the results of some other recent experiments (MAX, MSAM, Saskatoon), suggest that typical temperature fluctuations on degree scales may be larger than is indicated by the Gaier et al. scan. If so, CDM-Lambda models may indeed provide, from a point of view of CMB anisotropies, an acceptable alternative to flat CDM models.

Stompor, Radoslaw↗
NASA NTRS1994

Mg and Ti isotopes in presolar Al2O3

Oxygen isotopic compositions and initial Al-26/Al-27 ratios were reported for two presolar Al2O3 grains, Orgueil B and Bishunpur B39. In Orgueil B, O-17/O-16 is about twice the solar value but O-18/O-16 is normal. In B39, O-17/O-16 is approximately 7x higher than solar and O-18/O-16 is 0.6x the solar value. Spectroscopic observations of red giant stars show similar O compositions, which result when material that has experienced partial H burning is mixed into the stellar envelope by the first dredge-up. The O-17/O-16 ratios indicate that Orgueil B originated around a star of approximately 1.5 solar mass, while B39 formed around either a approximately 2 solar mass or 4-7 solar mass star. Both grains formed with Al-26/Al-27 ratios of approximately 10(exp -3). Aluminum-26 is produced in the H shell after core H burning has ceased and first dredge-up has occurred. It is spread through the envelope by the third dredge-up, which occurs in low- and intermediate-mass stars as a series of mixing events driven by thermal pulses in the He shell. In intermediate-mass stars (3-8 solar mass), Al-26 can also be brought to the surface by the second dredge-up, which occurs at the end of core He burning. We have measured Ti isotopes by ion probe in Orgueil B and Bishunpur B39, looking for evidence of He-shell nucleosynthesis. Stars of approximately 1.5 solar mass do not experience second dredge-up, so the Al-26 in Orgueil B must have been mixed outward during third dredge-up, which also supplies He-shell material to the envelope. The size of the isotopic shifts in Ti and Mg suggest that Orgueil B contains approximately 5-10x more material from the He-shell than from the H-shell. In contrast, the lack of measurable Mg and Ti anomalies in B39 imply little or no He-shell contribution. This indicates that Al-26 in B39 was supplied by second dredge-up prior to He-shell ignition and points to a parent star of 4-7 solar mass.

Huss, G. R.↗
NASA NTRS1994

Reply

While Hegg et al. (1993) accepts the criticism of Anderson et al. (1994) in principle, this involves the adoption of an aerosol composition model and the model that they propose to reconcile these observations with the assertion of Charlson et al. (1992) does not agree with many observations, particularly those made over the North Atlantic Ocean. Although the use of a gain factor (i.e. the partial derivative of aerosol mass with respect to the sulfate ion), proposed by Anderson et al., may be valid for particular cases where a proposed composition model really reflects the actual aerosol composition, this procedure is considered questionable in general. The use of sulfate as a tracer for nonsulfate aerosol mass is questionable, because in the present authors' data set, sulfate averaged only about 26% of the dry aerosol mass. The ammonium mass associated with sulfate mass is not analogous to that betwen the oxygen mass and sulfur mass in the sulfate ion. Strong chemical bonds are present between sulfur and oxygen in sulfate, whereas ammonium and sulfate in haze droplets are ions in solution that may or may not be associated with one another. Thus, there is no reason to assume that sulfate will act as a reliable tracer of ammonium mass. Hegg et al. expresses the view that their approach used for estimating sulfate light scattering efficiency is appropriate for the current level of understanding of atmospheric aerosols.

Hegg, Dean A.↗
NASA NTRS1996

Defect Structure of Beta NiAl Using the BFS Method for Alloys

The semiempirical BFS method for alloys is generalized by replacing experimental input with first-principles results thus allowing for the study of complex systems. In order to examine trends and behavior of a system in the vicinity of a given point of the phase diagram a search procedure based on a sampling of selected configurations is employed. This new approach is applied to the study of the beta phase of the Ni-Al system, which exists over a range of composition from 45-60 at.% Ni. This methodology results in a straightforward and economical way of reproducing and understanding the basic features of this system. At the stoichiometric composition, NiAl should exist in a perfectly ordered B2 structure. Ni-rich alloys are characterized by antisite point defects (with Ni atoms in the Al sites) with a decrease in lattice parameters. On the Al-rich side of stoichiometry there is a steep decrease in lattice parameter and density with increasing Al content. The presence of vacancies in Ni sites would explain such behavior. Recent X-ray diffraction experiments suggest a richer structure: the evidence, while strongly favoring the presence of vacancies in Ni sites, also suggests the possibility of some vacancies in Al sites in a 3:1 ratio. Moreover, local ordering of vacant sites may be preferred over a random distribution of individual point defects.

Bozzolo, Guillermo↗
NASA NTRS1995

Effects of confinement on partially premixed flames

Partially premixed combustion is an intermediate regime between the limiting cases of premixed and nonpremixed combustion. Although combustion problems are generally approached from one of these two limiting cases, there are many practical situations where flames cannot be considered as purely premixed or nonpremixed, and thus the partially premixed approach must be used. In partially premixed combustion, mechanisms from the premixed and nonpremixed regimes can coexist, and as a result some interesting new phenomena can arise. One such phenomenon is the flame stabilization in laminar mixing layers by triple flames. One of the first observations of triple flames was made by Phillips (1965), who investigated a triple flame propagating in a methane mixing layer. Kioni et al. (1993) also examined triple flames both experimentally and numerically. There have also been numerous analytical studies on the shape and propagation of triple flames under various assumptions by Dold (1989), Dold et al. (1991), and Hartley and Dold (1991). In terms of modeling, Muller et al. (1994) have combined the flamelet formulations for premixed and nonpremixed combustion in order to treat lifted diffusion flames. One common feature in the analytical and numerical studies mentioned above is the assumption of zero heat release, which is necessary to make the problem tractable. The effect of heat release on triple flames was investigated by Ruetsch et al. (1995), where for the unconfined case, flame speeds larger than their premixed counterparts were found. One of the most important practical situations in which these conditions arise is in lifted turbulent jet diffusion flames. At a critical velocity the burning zone of a fuel jet lifts off from the nozzle, moves to increasing distances as the jet velocity increases, and finally blows off. The mechanisms that control these phenomena, i.e. that determine the stability of these flames, are still not understood. In addition to regions where diffusion flame stabilization takes place, partially premixed conditions also exist during the ignition process in nonpremixed systems. Numerical simulations by Reveillon et al. (1994) of the ignition process in a weakly stirred mixture of fuel and oxidizer show that triple flames propagate along lines of stoichiometric mixture fraction throughout the fluid. In addition, Peters (1994) notes that NO(x) emissions are likely to be large in such transient cases, and therefore an understanding of triple flames can provide information concerning pollutant formation. This study extends the work previously done and examines the effects of lateral confinement on partially premixed flames. Once again, we study both the flame structure and propagation.

Ruetsch, G. R.↗