Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Baryon production and collective flow in relativistic heavy-ion collisions in the AGS, SPS, RHIC, and LHC energy regions ({radical}(s{sub NN}){<=}5 GeV to 5.5 TeV)

The features of net-baryon productions and collective flow in relativistic heavy-ion collisions at energies reached at the CERN Large Hadron Collider (LHC), BNL Relativistic Heavy Ion Collider (RHIC), CERN Super Proton Synchrotron (SPS), and BNL Alternating Gradient Synchrotron (AGS) with the model of nonuniform flow model (NUFM) are systematically studied in this paper. In particular we predict the feature of net-baryon productions and collective flow at LHC {radical}(s{sub NN})=5500 GeV based on the detailed study at RHIC {radical}(s{sub NN})=62.4 and 200 GeV. The dependencies of the features of baryon stopping and collective flow on the collision energies and centralities are investigated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Crystallization kinetics and thermodynamics of an Ag–In–Sb–Te phase change material using complementary in situ microscopic techniques

The crystallization of an amorphous Ag–In–Sb–Te (AIST) phase change material (PCM) is studied using multiple in situ imaging techniques to directly quantify crystal growth rates over a broad range of temperatures. The measurable growth rates span from ≈ 10 –9 to ≈ 20 m/s. Recent results using dynamic transmission electron microscopy (TEM), a photoemission TEM technique, and TEM with sub-framed imaging are reported here and placed into the context of previous growth rate measurements on AIST. Dynamic TEM experiments show a maximum observed crystal growth rate for as-deposited films to be > 20 m/s. It is shown that crystal growth above the glass transition can be imaged in a TEM through use of subframing and a high-frame-rate direct electron detection camera. Challenges associated with the determination of temperature during in situ TEM experiments are described. Finally, preliminary nanocalorimetry results demonstrate the feasibility of collecting thermodynamic data for crystallization of PCMs with simultaneous TEM imaging.

36 MATERIALS SCIENCE↗

An in-situ ZnS(Ag) UCN detector: conceptual studies

This report characterized ZnS(Ag) substrates using alpha-particle measurements; showed how PSD could be explained by particle stopping and straggling; and continued progress on prototype fabrication.

74 ATOMIC AND MOLECULAR PHYSICS↗

Transverse impedance measurement in RHIC and the AGS

The RHIC luminosity upgrade program aims for an increase of the polarized proton luminosity by a factor 2. To achieve this goal a significant increase in the beam intensity is foreseen. The beam coupling impedance could therefore represent a source of detrimental effects for beam quality and stability at high bunch intensities. For this reason it is essential to quantify the accelerator impedance budget and the major impedance sources, and possibly cure them. In this MD note we summarize the results of the 2013 transverse impedance measurements in the AGS and RHIC. The studies have been performed measuring the tune shift as a function of bunch intensity and deriving the total accelerator machine transverse impedance. For RHIC, we could obtain first promising results of impedance localization measurements as well.

43 PARTICLE ACCELERATORS↗

Simulations of Merging Helion Bunches on the AGS Injection Porch

During the setup of helions for the FY2014 RHIC run it was discovered that the standard scheme for merging bunches on the AGS injection porch required an injection kicker pulse shorter than what was available. To overcome this difficulty, K. Zeno proposed and developed an interesting and unusual alternative which uses RF harmonic numbers 12, 4, 2 (rather than the standard 8, 4, 2) to merge 8 helion bunches into 2. In this note we carry out simulations that illustrate how the alternative scheme works and how it compares with the standard scheme. This is done in Sections 13 and 14. A scheme in which 6 bunches are merged into 1 is simulated in Section 15. This may be useful if more helions per merged bunch are needed in future runs. General formulae for the simulations are given in Sections 9 through 12. For completeness, Sections 1 through 8 give a derivation of the turn-by-turn equations of longitudinal motion at constant magnetic field. The derivation is based on the work of MacLachlan. The reader may wish to skip over these Sections and start with Section 9.

43 PARTICLE ACCELERATORS↗

FY2014 Parameters for Gold Ions in Booster, AGS, and RHIC

The nominal parameters for gold ions in Booster, AGS, and RHIC are given for the FY2014 running period. The parameters are worked out using various formulas to derive mass, kinetic parameters, RF parameters, ring parameters, etc.. The ''standard setup'', ''medium-energy'', and ''low-energy'' parameters are summarized in separate sections.

43 PARTICLE ACCELERATORS↗

FY2014 Parameters for Helions and Gold Ions in Booster, AGS, and RHIC

The nominal parameters for helions (helion is the bound state of two protons and one neutron, the nucleus of a helium-3 atom) and gold ions in Booster, AGS, and RHIC are given for the FY2014 running period. The parameters are found using various formulas to derive mass, helion anomalous g-factor, kinetic parameters, RF parameters, ring parameters, etc..

43 PARTICLE ACCELERATORS↗

Pressure distribution along the AGS vacuum chambers with new types of pump out conduits

The AGS HEBT and ring vacuum system is monitored by the discharge current of the magnet ion pumps, which is proportional to the pressure at the inlet port of these ion pumps. The discharge current is measured and suitably calibrated to indicate the ion pump pressure. In order to calculate the vacuum chamber pressure from the ion pump pressure, a detailed analysis is essential to compute their difference in different scenarios. Such analysis has been carried out numerically in the past for the system with the older type of pump out conduits, and similar analysis using FEM in ANSYS is presented in this paper with the newer type of pump out conduit.

43 PARTICLE ACCELERATORS↗

On the Possibility of Installing the Rapid Cycling Synchrotron of the Electron Ion Collider in the AGS Tunnel

This report describes electron injector concepts for the Electron Ion Collider (EIC) using the tunnel of the Alternating Gradient Synchrotron (AGS) of Brookhaven National Laboratory which is to be compared to the RCS in the RHIC tunnel or a new ring in a new tunnel. Possible designs of the electron booster synchrotron, the Rapid Cycling Synchrotron (RCS) with good spin transparency with electron energies of up to 10 GeV and 18 GeV and placing the injector linac in the adjacent Building 912 for are worked out. The main reason for studying such options is the expectation that it will reduce the Electron Ion Collider injector cost because no civil construction is required, the machine is very compact, and existing infrastructure can be used. The design of an RCS with a top energy of 10 GeV with good spin transparency is quite conventional. However, for collider operation with 18 GeV electrons, this option would require accelerating the 10 GeV beam in the Electron Storage Ring (ESR) to 18 GeV and relying on the Sokolov Ternov self-polarization at 18 GeV in the ESR. Solutions for an RCS with Electron energies of up to 18 GeV with or without spin transparency are found to be possible but push the envelope of conventional magnet technology.

43 PARTICLE ACCELERATORS↗

Commissioning of the new AGS MMPS transformers

The Brookhaven AGS Main Magnet Power Supply (MMPS) is a thyristor control supply rated at 5500 Amps. +/-9000 Volts. The peak magnet power is 50 MWatts. The power supply is fed from a motor/generator manufactured by Siemens. During rectify and invert operation the P Bank power supplies are used. During the flattops the F Bank power supplies are used. The P Bank power supplies are fed from two 23 MVA transformers and the F Bank power supplies are fed from two 5.3 MYA transformers. The fundamental frequency of the F Bank power supplies is 1440 Hz, however the fundamental frequency of the P banks was 720 Hz. It was very important to reduce the ripple during rectify to improve polarized proton operations. For this reason and also because the original transformers were 45 years old we replaced these transformers with new ones and we made the fundamental frequency of both P and F banks 1440 Hz. This paper will highlight the major hurdles that were involved during the installation of the new transformers. It will present waveforms while running at different power levels up to 6MW full load. It will show the transition from the F-Bank power supplies to the P-Banks and also show the improvements in ripple made on the P-Bank power supplies.

43 PARTICLE ACCELERATORS↗

Analysis of nanostructuring in high figure-of-merit Ag{sub 1-x}Pb{sub m}SbTe{sub 2+m} thermoelectric materials.

The nanostructuring occurring in the AgPb{sub 18}SbTe{sub 20} system is documented and it is shown to contain coherent or semi-coherent Ag-rich nano-inclusions, most in range of 2 to 30 nm embedded in an essentially PbTe matrix. The analysis of the nanostructuring supports the mechanism believed to be responsible for achieving a high thermoelectric figure-of-merit.

36 MATERIALS SCIENCE↗

Facile synthesis of sunlight-driven AgCI:Ag plasmonic nanophotocatalyst.

Highly efficient plasmonic photocatalysts of AgCl:Ag hybrid nanoparticles are successfully synthesized via a one-pot synthetic approach involving a precipitation reaction followed by polyol reduction. The as-synthesized nanoparticles exhibit high catalytic performance under visible light and sunlight for decomposing organics, such as methylene blue.

36 MATERIALS SCIENCE↗

Photovoltaic Device with over 5% Efficiency Based on an n-Type Ag 2 ZnSnSe 4 Absorber

The kesterite material Cu 2 ZnSn(S,Se) 4 (CZTSSe) is an attractive earth–abundant semiconductor for photovoltaics. However, the power conversion efficiency is limited by a large density of I–II antisite defects, which cause severe band tailing and open–circuit voltage loss. Ag 2 ZnSnSe 4 (AZTSe) is a promising alternative to CZTSSe with a substantially lower I–II antisite defect density and smaller band tailing. AZTSe is weakly n–type, and this study reports for the first time on how the carrier density is impacted by stoichiometry. Here, this study presents the first–ever photovoltaic device based on AZTSe, which exhibits an efficiency of 5.2%, which is the highest value reported for an n–type thin–film absorber. Due to the weakly n–type nature of the absorber, a new architecture is employed (SnO:F/AZTSe/MoO 3 /ITO) to replace conventional contacts and buffer materials. Using this platform, it is shown that the band tailing parameter in AZTSe more closely resembles that of CIGSe than CZTSSe, underscoring the strong promise of this absorber. In demonstrating the ability to collect photogenerated carriers from AZTSe, this study paves the way for novel thin–film heterojunction architectures where light absorption in the n–type device layer can supplement absorption in the p–type layer as opposed to producing a net optical loss.

36 MATERIALS SCIENCE↗

Operando NRIXS and XAFS Investigation of Segregation Phenomena in Fe-Cu and Fe-Ag Nanoparticle Catalysts during CO 2 Electroreduction

Operando nuclear resonant inelastic X-ray scattering (NRIXS) and X-ray absorption fine-structure spectroscopy (XAFS) measurements were used to gain insight into the structure and surface composition of FeCu and FeAg nanoparticles (NPs) during the electrochemical CO 2 reduction (CO 2 RR) and to extract correlations with their catalytic activity and selectivity. The formation of a core–shell structure during CO 2 RR for FeAg NPs was inferred from the analysis of the operando NRIXS data (phonon density of states, PDOS) and XAFS measurements. Electrochemical analysis of the FeAg NPs revealed a faradaic selectivity of 36 % for CO in 0.1 M KHCO 3 at -1.1 V vs. RHE, similar to that of pure Ag NPs. In contrast, a predominant selectivity towards H 2 evolution is obtained in the case of the FeCu NPs, analogous to the results obtained for pure Fe NPs, although small Cu NPs have also been shown to favor H 2 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas–Phase Synthesis of 3–Vinylcyclopropene via the Crossed Beam Reaction of the Methylidyne Radical (CH; X 2 Π) with 1,3–Butadiene (CH 2 CHCHCH 2 ; X 1 Ag)

The crossed molecular beam reactions of the methylidyne radical (CH; X 2 Π) with 1,3-butadiene (CH 2 CHCHCH 2 ; X 1 Ag) along with their (partially) deuterated counterparts were performed at collision energies of 20.8 kJ mol -1 under single collision conditions. Combining our laboratory data with ab initio calculations, we reveal that the methylidyne radical may add barrierlessly to the terminal carbon atom and/or carbon-carbon double bond of 1,3-butadiene, leading to doublet C 5 H 7 intermediates with life times longer than the rotation periods. Furthermore, these collision complexes undergo non-statistical unimolecular decomposition through hydrogen atom emission yielding the cyclic cis- and trans-3-vinyl-cyclopropene products with reaction exoergicities of 119±42 kJ mol -1 . Since this reaction is barrierless, exoergic, and all transition states are located below the energy of the separated reactants, these cyclic C 5 H 6 products are predicted to be accessed even in low-temperature environments, such as in hydrocarbon-rich atmospheres of planets and cold molecular clouds such as TMC-1.

3-vinylcyclopropene↗

Carbon Dioxide Electroreduction using a Silver-Zinc Alloy [CO 2 Electroreduction on a Ag-Zn Alloy]

We report on CO 2 electroreduction activity and selectivity of a polycrystalline AgZn foil in aqueous bicarbonate electrolyte. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) measurements show that the alloy foil was slightly enriched in zinc both at the surface and in the bulk, with a surface alloy composition of 61.3±5.4 at % zinc and with Ag 5 Zn 8 as the most prominent bulk phase. AgZn is active for CO 2 reduction; CO is the main product, likely due to the weak CO binding energy of the surface, with methane and methanol emerging as minor products. Compared to pure silver and pure zinc foils, enhancements in activity and selectivity for methane and methanol are observed. A five-fold increase is observed in the combined partial current densities for methane and methanol at –1.43 V vs. the reversible hydrogen electrode (RHE), representing a four- to six-fold increase in faradaic efficiency. Here, such enhancements indicate the existence of a synergistic effect between silver and zinc at the surface of the alloy that contributes to the enhanced formation of further reduced products.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modifying the Reactivity of Single Pd Sites in a Trimetallic Sn‐Pd‐Ag Surface Alloy: Tuning CO Binding Strength

Abstract Improving control over active‐site reactivity is a grand challenge in catalysis. Single‐atom alloys (SAAs) consisting of a reactive component doped as single atoms into a more inert host metal feature localized and well‐defined active sites, but fine tuning their properties is challenging. Here, a framework is developed for tuning single‐atom site reactivity by alloying in an additional inert metal, which this work terms an alloy‐host SAA. Specifically, this work creates about 5% Pd single‐atom sites in a Pd 33 Ag 67 (111) single crystal surface, and then identifies Sn based on computational screening as a suitable third metal to introduce. Subsequent experimental studies show that introducing Sn indeed modifies the electronic structure and chemical reactivity (measured by CO desorption energies) of the Pd sites. The modifications to both the electronic structure and the CO adsorption energies are in close agreement with the calculations. These results indicate that the use of an alloy host environment to modify the reactivity of single‐atom sites can allow fine‐tuning of catalytic performance and boost resistance against strong‐binding adsorbates such as CO.

Mohrhusen, Lars↗