Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Experimentally Measured Thermal Masses of Adsorption Heat Exchangers

The thermal masses of components influence the performance of many adsorption heat pump systems. However, typically when experimental adsorption systems are reported, data on thermal mass are missing or incomplete. This work provides original measurements of the thermal masses for experimental sorption heat exchanger hardware. Much of this hardware was previously reported in the literature, but without detailed thermal mass data. The data reported in this work are the first values reported in the literature to thoroughly account for all thermal masses, including heat transfer fluid. The impact of thermal mass on system performance is also discussed, with detailed calculation left for future work. The degree to which heat transfer fluid contributes to overall effective thermal mass is also discussed, with detailed calculation left for future work. This work provides a framework for future reporting of experimental thermal masses. The utilization of this framework will enrich the data available for model validation and provide a more thorough accounting of adsorption heat pumps.

30 DIRECT ENERGY CONVERSION↗

Water Adsorption on a-Fe2O3(0001) at Near Ambient Conditions

We have investigated hydroxylation and water adsorption on {alpha}-Fe{sub 2}O{sub 3}(0001) at water vapor pressures up to 2 Torr and temperatures ranging from 277 to 647 K (relative humidity (RH) {le} 34%) using ambient-pressure X-ray photoelectron spectroscopy (XPS). Hydroxylation occurs at the very low RH of 1 x 10{sup -7} % and precedes the adsorption of molecular water. With increasing RH, the OH coverage increases up to one monolayer (ML) without any distinct threshold pressure. Depth profiling measurements showed that hydroxylation occurs only at the topmost surface under our experimental conditions. The onset of molecular water adsorption varies from {approx}2 x 10{sup -5} to {approx} 4 x 10{sup -2} % RH depending on sample temperature and water vapor pressure. The coverage of water reaches 1 ML at {approx}15% RH and increases to 1.5 ML at 34% RH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Zeolite Nonwoven for the Adsorption of Radioactive Cesium - 13288

The zeolite nonwoven fabric produced by TDS (Totally Dry System) process has some advantages such as the control of zeolite content, flexibility, strength and water-resistant property depending on the purpose. Hence the zeolite nonwoven fabric is expected for the application in various fields of the decontamination of Cs-contaminated water. In this study, Cs adsorption properties of zeolite nonwoven fabrics were examined by batch experiments, and the radiation stability, thermal stability and chemical durability were evaluated. As for batch adsorption properties, relatively large uptake rate of Cs{sup +} was obtained; the uptake equilibrium attained within 20 min and the uptake (%) was above 95%. The differences in zeolite content had no effects on the Cs{sup +} uptake (%). The uptake (%) of Cs{sup +} in seawater was slightly lowered compared to that in the presence of HNO{sub 3}. The uptake (%) of Cs{sup +} in seawater was estimated to be above 90% after 2 h-shaking, indicating the considerable enhancement of uptake rate compared to the conventional granular zeolites. The uptake (%) of Cs{sup +} for the zeolite high content type was estimated to be above 99% by using {sup 137}Cs tracer. As for the comparison of sealing treatment, the uptake (%) for the zeolite sheet treated with edge sealing was larger than that with rapping treatment. The uptake (%) for the zeolite sheet (zeolite high content type) was estimated to be about 95%, which is independent of sealing treatment and NaOH concentration. As for the stability, the surface morphology and the structure of zeolite sheet were not altered by the treatment with acid and alkaline solutions under the experimental conditions. The zeolite sheets were also stable after {sup 60}Co-γ ray irradiation up to 7.01x10{sup 6} R. On the other hand, color change for both fiber and zeolite and the shrinkage of the fiber were observed after heat treatment at 150 deg. C for 2 h. Thus the considerable enhancement of adsorption properties was observed by using zeolite nonwoven fabrics compared to the conventional granular zeolites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Embedded Cluster Calculations of Water Adsorption on the UO{sub 2} (111) Surface - 16503

The adsorption of water on the (111) surface of UO2 has been investigated with density functional theory calculations using the periodic electrostatic embedded cluster method. In particular, the adsorptions of a single water molecule, molecularly and dissociatively, as well as two water molecules, one molecularly and one dissociatively, have been studied. A strong dependence of the adsorption energy on basis set is found, and good agreement with energies calculated from previous theoretical studies using different methods is obtained. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influence of Na and Ca Concentrations on Sr Adsorption Performance of Cs-Sr Simultaneous Adsorbent - 19315

Treating evaporation-concentrated liquid waste stored in tanks at Fukushima Daiichi Nuclear Power Station site with high radioactive Cs and Sr concentrations has been examined using Cs-Sr simultaneous adsorbent. The evaporation-concentrated liquid waste contains Na and Ca concentrations which are almost equal to or higher than their natural concentrations in seawater. In the Cs-Sr simultaneous adsorbent, Na and Ca compete with Sr adsorption. For the aforementioned reasons, the influence of Na and Ca concentrations on Sr adsorption performance of Cs-Sr simultaneous adsorbent was experimentally evaluated. The throughput of Sr adsorption was measured by column test in which Na and Ca concentrations were set as parameters. The results showed that higher concentrations of Na and Ca caused reduction of throughput of Sr adsorbent, and Ca concentration that showed a certain throughput was two or more orders of magnitude lower than Na concentration. This result reflected the selectivity of Cs-Sr simultaneous adsorbent was higher in the order of Sr > Ca > Na. Based on the results, treatment process of evaporation-concentrated liquid waste that consisted of dilution by water and then removal of Sr using Cs-Sr simultaneous adsorbent was investigated. The results suggested that the dilution of the evaporation-concentrated liquid waste improve the throughput of the Cs-Sr simultaneous adsorbent and leads to the reduction of the amount of Cs-Sr simultaneous adsorbent needed to treat the evaporation-concentrated liquid waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multicomponent adsorption of radioactive iodine and krypton using ETS-10 supported carbon nano-polyhedrons

Over 13% of the world's energy demand is supplied by nuclear power plants in 31 countries. This demand is growing; by 2030 the IAEA predicts a 100% increase in the demand for nuclear energy. The increase in nuclear energy production imposes a growing strain on the uranium fuel supply. At current consumption rates the world's supply of uranium is projected to last ∼100 years. Following the IAEA's prediction for increased nuclear energy, uranium supplies will dwindle even more quickly. However, this consequence can be limited as ∼95% of uranium is left in used nuclear fuel (UNF). Reprocessing of UNF will utilize this remaining uranium and extend the lifetime of the world's uranium supply. One of the concerns with nuclear reprocessing is that it frees radionuclides created by the fission of uranium to be released into the atmosphere through off-gas. The major constituents of off-gas include: {sup 85}Kr, {sup 129}I, {sup 14}C, {sup 3}H, and various Xe isotopes. {sup 85}Kr and {sup 129}I present the largest threat due to their harmful environmental effects and abundance. They are the most practical contaminants to be removed to meet requirements for radionuclide release. Removal of these contaminants has been a challenge since the 1950's, and several methods including cryogenic distillation, fluorocarbon absorption, wet scrubbing, and adsorption have been employed. Currently, adsorption on porous solid sorbents shows the most promising results. Until now, several sorbents such as silver impregnated mordenite, silver Engelhard titanosilicate 10, chalcogen based aerogels, and metal organic framework, MOFs have been investigated for this purpose. Despite these advances, development of economical and highly active sorbents for complete removal and immobilization of volatile radioactive gases remains a key challenge in realizing advanced fuel cycles. This work is focused on the multicomponent of {sup 85}Kr and {sup 129}I from a simulated off-gas with an Engelhard titanosilicate 10 (ETS-10) supported carbon nano-polyhedron sorbent. Adsorption studies were performed to determine iodine sorption capacity as a function of temperature and iodine inlet concentration. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Water adsorption on alpha-Fe2O3(0001) at near ambient conditions

We have investigated hydroxylation and water adsorption on {alpha}-Fe{sub 2}O{sub 3}(0001) at water vapor pressures up to 2 Torr and temperatures ranging from 277 to 647 K (relative humidity (RH) {<=} 34%) using ambient-pressure x-ray photoelectron spectroscopy (XPS). Hydroxylation occurs at the very low RH of 1 x 10{sup -7}% and precedes the adsorption of molecular water. With increasing RH, the OH coverage increases up to one monolayer (ML) without any distinct threshold pressure. Depth profiling measurements showed that hydroxylation occurs only at the topmost surface under our experimental conditions. The onset of molecular water adsorption varies from {approx}2 x 10{sup -5} to {approx}4 x 10{sup -2}% RH depending on sample temperature and water vapor pressure. The coverage of water reaches I ML at {approx} 15% RH and increases to 1.5 ML at 34% RH.

36 MATERIALS SCIENCE↗

Computational screening of large molecule adsorption by metal-organic frameworks.

Grand canonical Monte Carlo simulations were performed to investigate trends in low-pressure adsorption of a broad range of organic molecules by a set of metal-organic frameworks (MOFs). The organic analytes considered here are relevant to applications in chemical detection: small aromatics (o-, m-, and p-xylene), polycyclic aromatic hydrocarbons (naphthalene, anthracene, phenanthrene), explosives (TNT and RDX), and chemical warfare agents (GA and VM). The framework materials included several Zn-MOFs (IRMOFs 1-3, 7, 8), a Cr-MOF (CrMIL-53lp), and a Cu-MOF (HKUST-1). Many of the larger organics were significantly adsorbed by the target MOFs at low pressure, which is consistent with the exceptionally high isosteric heats of adsorption (25 kcal/mol - 60 kcal/mol) for this range of analyte. At a higher loading pressure of 101 kPa, the Zn-MOFs show a much higher volumetric uptake than either CrMIL-53-lp or HKUST-1 for all types of analyte. Within the Zn-MOF series, analyte loading is proportional to free volume, and loading decreases with increasing analyte size due to molecular packing effects. CrMIL-53lp showed the highest adsorption energy for all analytes, suggesting that this material may be suitable for low-level detection of organics.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Adsorption-Engineered Hydrocarbon Ionomers for Durable Proton-Exchange Membrane Fuel Cells

Reducing reliance on perfluoroalkyl substances (PFAS) in proton-exchange membrane fuel cells requires hydrocarbon ionomers that combine high performance with long-term durability, a persistent challenge in catalyst-layer design. Here, we identify oxidation-driven ionomer-catalyst interfacial degradation as a dominant failure pathway in hydrocarbon ionomer-bonded cathodes and introduce an adsorption-engineering strategy to overcome this limitation. The comparison of a commercial sulfonated poly(phenylene) (Pemion) with structurally engineered sulfonated poly(fluorene)s demonstrated that electrode durability is governed by the interplay between ionomer adsorption strength and resistance to oxidative degradation on carbon-supported Pt catalysts. A poly(fluorene) ionomer with mobile alkyl sulfonic acid groups forms resilient interfaces, delivering 1.28 A cm−2 at 0.65 V under fully humidified H2/air conditions (80°C and 150 kPaabs), comparable to Pemion. After 90,000 accelerated potential cycles, the poly(fluorene)-bonded cathode exhibits significantly improved durability, with only 29% performance loss compared to 58% for Pemion; further molecular refinement reduces the loss to 17%, approaching that of Nafion-bonded cathodes (14%). These findings establish adsorption-engineered ionomer design that decouples interfacial anchoring from oxidative degradation as a general strategy for achieving durable, high-performance PFAS-free PEM fuel cell electrodes.

08 HYDROGEN↗

A generalized procedure for the prediction of multicomponent adsorption equilibria

Prediction of multicomponent adsorption equilibria has been investigated for several decades. While there are theories available to predict the adsorption behavior of ideal mixtures, there are few purely predictive theories to account for nonidealities in real systems. Most models available for dealing with nonidealities contain interaction parameters that must be obtained through correlation with binary-mixture data. However, as the number of components in a system grows, the number of parameters needed to be obtained increases exponentially. Here, a generalized procedure is proposed, as an extension of the predictive real adsorbed solution theory, for determining the parameters of any activity model, for any number of components, without correlation. This procedure is then combined with the adsorbed solution theory to predict the adsorption behavior of mixtures. As this method can be applied to any isotherm model and any activity model, it is referred to as the generalized predictive adsorbed solution theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Reactivity of Ultrathin Oxides: NO Adsorption on Monolayer FeO(111)

Abstract Ultrathin metal oxides exhibit unique chemical properties and show promise for applications in heterogeneous catalysis. Monolayer FeO films supported on metal surfaces show large differences in reactivity depending on the metal substrate, potentially enabling tuning of the catalytic properties of these materials. Nitric oxide (NO) adsorption is facile on silver‐supported FeO, whereas a similar film grown on platinum is inert to NO under similar conditions. Ab initio calculations link this substrate‐dependent behavior to steric hindrance caused by substrate‐induced rumpling of the FeO surface, which is stronger for the platinum‐supported film. Calculations show that the size of the activation barrier to adsorption caused by the rumpling is dictated by the strength of the metal–oxide interaction, offering a straightforward method for tailoring the adsorption properties of ultrathin films.

Merte, Lindsay R.↗

Prediction by Convolutional Neural Networks of CO 2 /N 2 Selectivity in Porous Carbons from N 2 Adsorption Isotherm at 77 K

Abstract Porous carbons are an important class of porous materials with many applications, including gas separation. An N 2 adsorption isotherm at 77 K is the most widely used approach to characterize porosity. Conventionally, textual properties such as surface area and pore volumes are derived from the N 2 adsorption isotherm at 77 K by fitting it to adsorption theory and then correlating it to gas separation performance (uptake and selectivity). Here the N 2 isotherm at 77 K was used directly as input (representing feature descriptors for the porosity) to train convolutional neural networks to predict gas separation performance (using CO 2 /N 2 as a test case) for porous carbons. The porosity space for porous carbons was explored for higher CO 2 /N 2 selectivity. Porous carbons with a bimodal pore‐size distribution of well‐separated mesopores (3–7 nm) and micropores (<2 nm) were found to be most promising. This work will be useful in guiding experimental research of porous carbons with the desired porosity for gas separation and other applications.

Wang, Song↗

Overcoming Fundamental Limitations in Adsorbent Design: Alkene Adsorption by Non‐porous Copper(I) Complexes

Abstract Purifying alkenes from alkanes requires cryogenic distillation. This consumes energy equivalent to countries of ca. 5 million people. Replacing distillation with adsorption processes would significantly increase energy efficiency. Trade‐offs between kinetics, selectivity, capacity, and heat of adsorption have prevented production of an optimal adsorbent. We report adsorbents that overcome these trade‐offs. [Cu‐Br] 3 and [Cu‐H] 3 are air‐stable trinuclear complexes that undergo reversible solid‐state inter‐molecular rearrangements to produce dinuclear [Cu‐Br⋅(alkene)] 2 and [Cu‐H⋅(alkene)] 2 . The reversible solid‐state rearrangement, confirmed in situ using powder X‐ray diffraction, allows adsorbent design trade‐offs to be overcome, coupling low heat of adsorption (−10 to −17 kJ mol −1 alkene ), high alkene:alkane selectivity (47; 29), and uptake capacity (>2.5 mol alkene mol −1 Cu3 ). Most remarkably, [Cu‐H] 3 displays fast uptake and regenerates capacity within 10 minutes.

Parasar, Devaborniny↗

Tuning the Reactivity of Ultrathin Oxides: NO Adsorption on Monolayer FeO(111)

Abstract Ultrathin metal oxides exhibit unique chemical properties and show promise for applications in heterogeneous catalysis. Monolayer FeO films supported on metal surfaces show large differences in reactivity depending on the metal substrate, potentially enabling tuning of the catalytic properties of these materials. Nitric oxide (NO) adsorption is facile on silver‐supported FeO, whereas a similar film grown on platinum is inert to NO under similar conditions. Ab initio calculations link this substrate‐dependent behavior to steric hindrance caused by substrate‐induced rumpling of the FeO surface, which is stronger for the platinum‐supported film. Calculations show that the size of the activation barrier to adsorption caused by the rumpling is dictated by the strength of the metal–oxide interaction, offering a straightforward method for tailoring the adsorption properties of ultrathin films.

Merte, Lindsay R.↗

Prediction by Convolutional Neural Networks of CO 2 /N 2 Selectivity in Porous Carbons from N 2 Adsorption Isotherm at 77 K

Abstract Porous carbons are an important class of porous materials with many applications, including gas separation. An N 2 adsorption isotherm at 77 K is the most widely used approach to characterize porosity. Conventionally, textual properties such as surface area and pore volumes are derived from the N 2 adsorption isotherm at 77 K by fitting it to adsorption theory and then correlating it to gas separation performance (uptake and selectivity). Here the N 2 isotherm at 77 K was used directly as input (representing feature descriptors for the porosity) to train convolutional neural networks to predict gas separation performance (using CO 2 /N 2 as a test case) for porous carbons. The porosity space for porous carbons was explored for higher CO 2 /N 2 selectivity. Porous carbons with a bimodal pore‐size distribution of well‐separated mesopores (3–7 nm) and micropores (<2 nm) were found to be most promising. This work will be useful in guiding experimental research of porous carbons with the desired porosity for gas separation and other applications.

Wang, Song↗

Direct Structural Identification of Gas Induced Gate‐Opening Coupled with Commensurate Adsorption in a Microporous Metal–Organic Framework

Abstract Gate‐opening is a unique and interesting phenomenon commonly observed in flexible porous frameworks, where the pore characteristics and/or crystal structures change in response to external stimuli such as adding or removing guest molecules. For gate‐opening that is induced by gas adsorption, the pore‐opening pressure often varies for different adsorbate molecules and, thus, can be applied to selectively separate a gas mixture. The detailed understanding of this phenomenon is of fundamental importance to the design of industrially applicable gas‐selective sorbents, which remains under investigated due to the lack of direct structural evidence for such systems. We report a mechanistic study of gas‐induced gate‐opening process of a microporous metal–organic framework, [Mn(ina) 2 ] (ina=isonicotinate) associated with commensurate adsorption, by a combination of several analytical techniques including single crystal X‐ray diffraction, in situ powder X‐ray diffraction coupled with differential scanning calorimetry (XRD‐DSC), and gas adsorption–desorption methods. Our study reveals that the pronounced and reversible gate opening/closing phenomena observed in [Mn(ina) 2 ] are coupled with a structural transition that involves rotation of the organic linker molecules as a result of interaction of the framework with adsorbed gas molecules including carbon dioxide and propane. The onset pressure to open the gate correlates with the extent of such interaction.

Banerjee, Debasis↗

Trends in Adsorption Energies of the Oxygenated Species on Single Platinum Atom Embedded in Carbon Nanotubes

Herein we study the effect of strain on the catalytic activity of different Pt-doped single wall metallic carbon nanotubes (SWCNT) towards the oxygen reduction reaction (ORR). We consider the possibility of the Pt-doped at single vacancy inside the SWCNT to investigate the effect of confinement on the reaction mechanism. Density functional theory calculations indicate that for the SWCNTs with tube diameters below 7 Å, the strain energy varies significantly influencing the adsorption energies of the key intermediates of the ORR reaction. For the SWCNTs with tube diameters above 7 Å, on the other hand, both the calculated strain and the adsorption energies are almost constant. We furthermore find that the adsorption energies are strongly affected by confinement effects as shown for Pt-doped systems that are located inside the SWCNT. We show that the Pt-doped at single vacancy of the SWCNT strongly binds the oxygenated species under ORR potentials and therefore the active species is covered by oxo- or hydroxo group. Because the presence of Pt atoms doped at the single and double vacancies of the SWCNT is equivalently probable we also studied the Pt-doped at double vacancy. We find that the most active motif is the Pt-doped at double vacancy of SWCNT with 0.24V overpotenital.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Multicomponent Hydrocarbon Feed on Hydrocarbon Adsorption–Desorption and Oxidation Light-Off Behavior on a Pd/BEA Hydrocarbon Trap

A model hydrocarbon trap material consisting of palladium promoted zeolite beta on a monolith core was studied with a multicomponent hydrocarbon feed. Dodecane and ethylene adsorption, followed by temperature programmed oxidation (TPO), was used in the presence of CO in wet and dry conditions to study the impact of various species on hydrocarbon storage, oxidation, and desorption. Low temperature adsorption experiments were used to quantify hydrocarbon storage capacity, while temperature programmed desorption (TPD) and TPO studies were used to investigate both oxidation and desorption of the various hydrocarbon species. Here, the low temperature adsorption experiments suggest a moderate impact of water on dodecane uptake as dry experiments adsorbed more dodecane overall than those under wet conditions. Additionally, the presence of CO and ethylene also impaired dodecane uptake. TPD studies indicated a coupled relationship between hydrocarbon oxidation light-off and desorption. By varying the composition of the feed, specifically via the inclusion of CO or ethylene, dodecane oxidation light-off was delayed, which actually increased the overall hydrocarbon trap efficiency.

42 ENGINEERING↗