Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Leaching Studies for Copper and Solder Alloy Recovery from Shredded Particles of Waste Printed Circuit Boards

Printed circuit boards (PCBs) comprise various metals such as Cu, Sn, and Pb, as well as platinum group metals. The recovery of metals from PCBs is important not only due to the waste treatment but also for recycling of valuable metals. In the present work, the leaching process of Cu, Sn, and Pb from PCBs was studied using fluoroboric acid and hydrogen peroxide as the leaching agent and oxidant, respectively. Pertinent factors including concentration of acid, temperature, liquid-solid ratio, and concentration of oxidizing agent were evaluated. The results showed 99 pct of copper and 90 pct solder alloy were dissolved at a temperature of 298 K (25 °C) for 180 minutes using 0.6 M HBF{sub 4} for the particle size range of 0.15 to 0.4 mm. Moreover, solid/liquid ratio had insignificant effect on the recovery of metals. Kinetics analysis revealed that the chemical control regime governs the process with activation energy 41.25 and 38.9 kJ/mol for copper and lead leaching reactions, respectively.

36 MATERIALS SCIENCE↗

Optimization of Quenching Parameters for the Reduction of Titaniferous Magnetite Ore by Lean Grade Coal Using the Taguchi Method and Its Isothermal Kinetic Study

In the present study, a unique method is adopted to achieve higher reducibility of titaniferous magnetite lump ore (TMO). In this method, TMO is initially heated followed by water quenching. The quenching process generates cracks due to thermal shock in the dense TMO lumps, which, in turn, increases the extent of reduction (EOR) using the lean grade coal as a reductant. The optimum combination of parameters found by using Taguchi’s L{sub 27} orthogonal array (OA) (five factors, three levels) is − 8 + 4 mm of particle size (PS{sub 1}), 1423 K of quenching temperature (Qtemp{sub 2}), 15 minutes of quenching time (Qtime{sub 3}), 3 times the number of quenching {(No. of Q)_3}, and 120 minutes of reduction time (Rtime{sub 3}) at fixed reduction temperature of 1473 K. At optimized levels of the parameters, 92.39 pct reduction is achieved. Isothermal reduction kinetics of the quenched TMO lumps at the optimized condition reveals mixed controlled mechanisms [initially contracting geometry (CG3) followed by diffusion (D3)]. Activation energies calculated are 69.895 KJ/mole for CG3 and 39.084 KJ/mole for D3.

36 MATERIALS SCIENCE↗

VNb{sub 9}O{sub 25-{delta}}-Synthesis, electrical conducting behaviour and density functional theory (DFT) calculation

In order to investigate the influence of the oxygen partial pressure (p(O{sub 2})) on the electrical conductivity, VNb{sub 9}O{sub 25} was prepared by thermal decomposition of freeze-dried oxalate precursors and by a solid state reaction of V{sub 2}O{sub 5}/Nb{sub 2}O{sub 5} mixtures. The samples were characterised by X-ray diffraction, grain size analysis and scanning electron microscopy (SEM). The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. Partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap. The calculated activation energy values are in good agreement with the experimental ones. - Graphical Abstract: The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. The partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap.

36 MATERIALS SCIENCE↗

Effects of electron-irradiation on electrical properties of AlGaN/GaN Schottky barrier diodes

Effects of 1 MeV electron-irradiation at room temperature on the electrical properties of AlGaN/GaN heterostructures, including leakage currents, threshold voltages, and electron traps, have been investigated using Schottky barrier diodes (SBDs) fabricated on the AlGaN. The SBDs, before and after the irradiation with a dose of 5x10{sup 15} cm{sup -2}, were characterized by temperature dependent current-voltage and capacitance-voltage measurements and deep level transient spectroscopy. It is found that the irradiation causes (i) significant increase in leakage currents, dominated by tunneling conduction, at both reverse and low-forward biases; (ii) a clear negative shift in threshold voltage in the pinch-off region; and (iii) creation of traps A{sub e}(approx1.1 eV) or A{sub 2}(1.2 eV) and E{sub e}(0.09 eV) in the GaN buffer and AlGaN regions. The irradiation-induced traps can be used to account for the increase in leakage currents and shift in threshold voltage. However, as compared to traps A{sub 2}(1.2 eV) and E(0.13 eV) induced in thick GaN layers by electron-irradiation, the irradiation-induced traps in the AlGaN/GaN heterostructures show some changes in activation energy and electron capture behavior.

36 MATERIALS SCIENCE↗

Non-linear dielectric signatures of entropy changes in liquids subject to time dependent electric fields

A model of non-linear dielectric polarization is studied in which the field induced entropy change is the source of polarization dependent retardation time constants. Numerical solutions for the susceptibilities of the system are obtained for parameters that represent the dynamic and thermodynamic behavior of glycerol. The calculations for high amplitude sinusoidal fields show a significant enhancement of the steady state loss for frequencies below that of the low field loss peak. Also at relatively low frequencies, the third harmonic susceptibility spectrum shows a “hump,” i.e., a maximum, with an amplitude that increases with decreasing temperature. Both of these non-linear effects are consistent with experimental evidence. While such features have been used to conclude on a temperature dependent number of dynamically correlated particles, N{sub corr}, the present result demonstrates that the third harmonic susceptibility display a peak with an amplitude that tracks the variation of the activation energy in a model that does not involve dynamical correlations or spatial scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recombination processes in pyrolytic cadmium sulfide films

The study concerns the photoelectric properties of pyrolytic CdS films, both undoped and doped with alkali metals. It is established that the films exhibit a long relaxation time of the photoconductivity at room temperature (t = 10{sup 3}-10{sup 4} s). The long relaxation is due to internal potential barriers between regions different in conductivity. The activation energy of the stored-up conductivity is determined at E = 0.68 eV. By thermostimulated conductivity studies of the films, three types of electron localization levels are found. These are related to sulfur vacancies (0.48 eV), oxygen substituting for sulfur (0.5 eV), and adsorbed alkali metal atoms (0.53 eV). On the basis of the results of studies of recombination processes, the model of energy levels in the band gap of pyrolytic CdS films doped with alkali metals is developed.

36 MATERIALS SCIENCE↗

Conductivity of Hg{sub 3}In{sub 2}Te{sub 6} crystals in high electric fields

The effect of electric field and temperature on the conductivity of bulk Hg{sub 3}In{sub 2}Te{sub 6} crystals is investigated. It is shown that the I-V characteristics in high electric fields are of the S type with the effect of switching into a low-resistance state. The critical voltage of transition from the Ohm law to the exponential dependence of the current (I) on the voltage (U) and the threshold voltage of transition into the region of negative differential resistance dU/dI = s< 0 linearly depend on the sample thickness. The activation energies of conductivity in low and high electric fields are determined. It is established that the superlinear portion of the I-V characteristic with dU/dI > 0 is described by the dependence of the type I = I{sub 0} exp(U/U{sub 0}) and caused by the electron transitions from the local centers with the energy level E{sub t} = 0.19 eV.

36 MATERIALS SCIENCE↗

Local emission spectroscopy of surface micrograins in A{sup III}B{sup V} semiconductors

The density-of-states spectra and the parameters of levels of electron states in locally chosen surface micrograins of indium antimonide and arsenide and gallium arsenide are studied with a tunneling electron microscope in the field-emission mode of measurements. By correlating the current–voltage characteristics with the formula for the probability of emission via levels, the activation energies of the levels (ψ) and the lifetimes of electrons at the levels (τ) are determined. Two types of levels for electron localization are identified. These are levels in the micrograin bulk (ψ ≈ 0.75, 1.15, and 1.59 eV for n-InSb, n-InAs, and n-GaAs, respectively; τ ~ 10{sup –8}–10{sup –7} s) and in the surface region of an i-InSb micrograin (ψ ~ 0.73, 1.33, 1.85, 2.15, 5.1 eV; τ ≈ 5 × 10{sup –8}–3 × 10{sup –7} s). A physical model involving the Coulomb-interaction-induced localization of light electrons and their size quantization determined by the electron effective mass, energy, and concentration and by the surface curvature of the micrograin is proposed.

36 MATERIALS SCIENCE↗

The Effect of Hydrogen on Fluctuation Embrittlement of Aluminum

In this paper, we describe the main processes occurring during the generation of vacancies in aluminum in the presence of hydrogen by ab initio methods using the SCAN functional. Hydrogen is shown to reduce the generation energy of vacancies from 2.8 to 0.8 eV. In this case, the eight hydrogen atoms located in the tetrahedral lattice voids around single aluminum atom greatly facilitate its movement to the interstitial site. The dependence of the activation energy of hydrogen embrittlement of aluminum on the hydrogen concentration in aluminum and temperature is calculated based on the kinetic strength concept. Hydrogen is shown to reduce the time of aluminum destruction only if its mole fraction in aluminum is greater than the critical level (~ 3 × 10{sup –4} at T = 293 K).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly polarized photoluminescence and its dynamics in semipolar (202{sup ¯}1{sup ¯}) InGaN/GaN quantum well

Very high polarization degree of 0.98, considerably larger than theoretical predictions, has been measured in (202{sup ¯}1{sup ¯}) In{sub 0.24}Ga{sub 0.76}N/GaN quantum well by low temperature photoluminescence. With increasing temperature, the polarization degree decreases due to thermal population of the excited valence band level. This effect suggests an accurate method to determine the interlevel energy, which, for the studied well, is 32 meV. Time-resolved photoluminescence measurements set radiative recombination times between 2 and 12 ns for temperatures from 3 to 300 K. Nonradiative recombination was found to be slow, over 2 ns at 300 K, taking place via traps with activation energy of 0.19 eV.

36 MATERIALS SCIENCE↗

Interaction of Iron with Alumina Refractory Under Flash Ironmaking Conditions

A novel flash ironmaking technology (FIT) based on the direct reduction of iron ore concentrate by a reducing gas such as hydrogen, natural gas, or coal gas has been developed at the University of Utah. A proper choice of refractories is expected to play an important role in the development of FIT and its scale-up. In this work, the interaction of iron with alumina refractory under flash ironmaking conditions has been investigated. A thermodynamic basis for the interaction phenomena has been developed by considering the Fe-Al-O system, and a kinetic model based on solid-state diffusion is proposed to describe the growth of the hercynite (FeAl{sub 2}O{sub 4}) spinel formed as a result of the interaction between Fe, O (from H{sub 2}O and CO{sub 2}), and Al{sub 2}O{sub 3}. Experiments were conducted with Fe powders and pure Al{sub 2}O{sub 3} in the temperature range 1200 to 1500 °C under gas atmospheres relevant to flash ironmaking, and the reacted samples were analyzed using XRD, SEM-EDX, and EPMA techniques. The analyses of reacted samples confirmed the formation of the hercynite (FeAl{sub 2}O{sub 4}) spinel phase and the thickness of the FeAl{sub 2}O{sub 4} spinel as measured using elemental line scans in SEM-EDX and EPMA varied in the range of 0.5 to 1.3 mm. Results showed that the proposed model suitably describes the growth of the hercynite spinel layer, which obeyed the parabolic rate law at all temperatures. The parabolic rate constants were obtained and the diffusion-controlled growth of the FeAl{sub 2}O{sub 4} layer strongly depended on temperature. Furthermore, using the kinetic model, an expression for the effective diffusivity ( (D{sub eff})-bar ) was obtained and its values at the experimental temperatures were determined. The solid-state diffusion was an activated process, as expected, with an activation energy value of 231 kJ/mol.

36 MATERIALS SCIENCE↗

Electric and dielectric properties of Bi-doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

Pure and Bi-doped Bi{sub x}CaCu{sub 3}Ti{sub 4}O{sub 12+1.5x} (BCCTO, x=0, 0.15, 0.25, and 0.3) ceramics were fabricated by the solid-state sintering method. The results indicate that the additional bismuth has a great influence on both the microstructures and the electric properties. A new phase (Bi{sub 4}Ti{sub 3}O{sub 12}) can be observed in the doped samples from the x-ray diffraction patterns. Additionally, the CCTO gain size can be controlled by bismuth content. All of the BCCTO samples show high dielectric permittivity ({approx}10{sup 4} at 10{sup 3} Hz) and varistor effect, and the relaxation peak shifts to higher frequency. The resistance rises with the increase in bismuth, and the activation energy at the grain boundary is reduced from 0.65 to 0.47 eV.

36 MATERIALS SCIENCE↗

Influence of Intrinsic Hole Concentration on Oxygen Sensing Properties of Hot-Spot Based Eu{sub 1-x}Ca{sub x}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}}Ceramics

We report oxygen sensing behavior of (Eu{sub 1-x}Ca{sub x})Ba{sub 2}Cu{sub 3}O{sub 7-{delta}}(x = 0.0,0.1) ceramics rods with formation of oxygen sensitive hot-spot upon application of external voltage. Oxygen response behavior of the x = 0.1 rod showed constant current plateau with increasing voltage and displayed better stability and reproducibility compared to x = 0 rod probably due to increased intrinsic hole concentration and reduction in activation energy as a result of Ca{sup 2+} substitution..

36 MATERIALS SCIENCE↗

Sensing response of copper phthalocyanine salt dispersed glass with organic vapours

Copper Phthalocyanine and other Metal Phthalocyanines are very flexible and tuned easily to modify their structural, spectroscopic, optical and electrical properties by either functionalizing them with various substituent groups or by replacing or adding a ligand to the central metal atom in the phthalocyanine ring and accordingly can be made sensitive and selective to various organic species or gaseous vapours. In the present work, we have dispersed Copper Phthalocyanine Salt (CuPcS) in sol-gel glass form using chemical route sol-gel method and studied its sensing mechanism with organic vapours like methanol and benzene and found that current increases onto their exposure with vapours. A variation in the activation energies was also observed with exposure of vapours.

36 MATERIALS SCIENCE↗

Dynamic-compliance and viscosity of PET and PEN

Complex dynamic-compliance and in-phase dynamic-viscosity data are presented and analyzed for PET and PEN advanced polyester substrates used for magnetic tapes. Frequency-temperature superposition is used to predict long-term behavior. Temperature and frequency ranges for the primary glass transition and secondary transitions are discussed and compared for PET and PEN. Shift factors from frequency-temperature superposition are used to determine activation energies for the transitions, and WLF parameters are determined for the polyester substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High efficiency of isopropanol combustion over cobalt oxides modified ZSM-5 zeolite membrane catalysts on paper-like stainless steel fibers

Catalytic performances of isopropanol combustion and bed pressure drop in structured fixed bed reactor composed of cobalt oxides modified ZSM-5 zeolite membrane catalysts on paper-like stainless steel fibers (Co/ZSM-5/PSSF) and traditional granular ZSM-5 zeolites catalysts were investigated in this paper. Both of the catalyst samples were fabricated by wetness impregnation method and were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectrometer (EDS) mapping and the N{sub 2} adsorption/desorption isotherm analyses. The result of EDS mapping revealed that cobalt oxides dispersed well on ZSM-5/PSSF. The Co/ZSM-5/PSSF catalyst display superior catalytic activity to granular Co/ZSM-5 catalyst, 50% and 90% isopropanol conversion temperatures over Co/ZSM-5/PSSF reduced 107 °C and 51 °C, respectively, compared with those over granular Co/ZSM-5 catalysts. The apparent activation energy for isopropanol combustion over Co/ZSM-5/PSSF (90 kJ/mol) was much lower than that over granular Co/ZSM-5 (134 kJ/mol). When the face velocity increased to 14.9 cm/s, the bed pressure drop of reactor filled with only Co/ZSM-5/PSSF catalysts was 9.5% of that of reactor filled with only granular Co/ZSM-5 catalysts. The ZSM-5 zeolite membrane on paper-like stainless steel fibers support provide good dispersion for cobalt oxides and Co/ZSM-5/PSSF show superior catalytic efficiency of isopropanol combustion and produced lower bed pressure drop in reactor compared with granular ZSM-5 zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Octahedral tilt transitions in the relaxor ferroelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}

The kinetics of octahedral tilt transitions in the lead-free relaxor material sodium bismuth titanate Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} (NBT) is investigated by electronic structure calculations within density functional theory. Energy barriers for transitions between tetragonal, rhombohedral and orthorhombic tilts in cation configurations with [001]- and [111]-order on the A-sites are determined by nudged elastic band calculations. By tilting entire layers of octahedra simultaneously we find that the activation energy is lower for structures with 001-order compared to such with 111-order. The energetic coupling between differently tilted layers is, however, negligibly small. By introducing a single octahedral defect we create local tilt disorder and find that the deformation energy of the neighboring octahedra is less in a rhombohedral than in a tetragonal structure. By successively increasing the size of clusters of orthorhombic defects in a rhombohedral matrix with 001-order, we determine a critical cluster size of about 40 Å . Thus groups of about ten octahedra can be considered as nuclei for polar nanoregions, which are the cause of the experimentally observed relaxor behavior of NBT. - Graphical abstract: Nine orthorhombic oxygen octahedral tilt defects in a rhombohedral tilt configuration. - Highlights: • Chemical order influences energy barriers of octahedral tilt transitions. • The octahedral deformation energy is lower in rhombohedral phases. • Tilt defect clusters are more likely in rhombohedral structures. • Tilt defect clusters can act as nuclei for polar nanoregions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Roles of the {beta} subunit hinge domain in ATP synthase F{sub 1} sector: Hydrophobic network formed by introduced {beta}Phe174 inhibits subunit rotation

The ATP synthase {beta} subunit hinge domain ({beta}Phe148 {approx} {beta}Gly186, P-loop/{alpha}-helixB/loop/{beta}-sheet4, Escherichia coli residue numbering) dramatically changes in conformation upon nucleotide binding. We previously reported that F{sub 1} with the {beta}Ser174 to Phe mutation in the domain lowered the {gamma} subunit rotation speed, and thus decreased the ATPase activity [M. Nakanishi-Matsui, S. Kashiwagi, T. Ubukata, A. Iwamoto-Kihara, Y. Wada, M. Futai, Rotational catalysis of Escherichia coli ATP synthase F{sub 1} sector. Stochastic fluctuation and a key domain of the {beta} subunit, J. Biol. Chem. 282 (2007) 20698-20704.]. Homology modeling indicates that the amino acid replacement induces a hydrophobic network, in which the {beta}Met159, {beta}Ile163, and {beta}Ala167 residues of the {beta} subunit are involved together with the mutant {beta}Phe174. The network is expected to stabilize the conformation of {beta}{sub DP} (nucleotide-bound form of the {beta} subunit), resulting in increased activation energy for transition to {beta}{sub E} (empty {beta} subunit). The modeling further predicts that replacement of {beta}Met159 with Ala or Ile weakens the hydrophobic network. As expected, these two mutations experimentally suppressed the ATPase activities as well as subunit rotation of {beta}S174F. Furthermore, the rotation rate decreased with the increase of the strength in the hydrophobic network. These results indicate that the smooth conformational change of the {beta} subunit hinge domain is pertinent for the rotational catalysis.

60 APPLIED LIFE SCIENCES↗