Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Assessment of age, origin, and sustainability of fossil aquifers: A geochemical and remote sensing-based approach

An integrated approach was developed to assess the sustainability, origin, age, evolution, and groundwater potential of large fossil aquifers using the Mega Aquifer System (MAS) (area: 2 x 10(6) km(2)) in the Arabian Peninsula as a test site. A two-step exercise was adopted, the sustainability of the MAS was first investigated through the analysis of GRACE data and land surface model (LSM) outputs. Then, integrated geochemical, remote sensing, and field studies were conducted to address the age, origin, hydrogeological setting, and evolution of the southern sections of the MAS (Rub Al Khali Aquifer System (RAKAS)), the area identified from the analysis of GRACE and ISMs as being the most suited for sustainable development. Analysis of GRACE and ISMs revealed: (1) the MAS central and northern sections are experiencing high groundwater extraction (6.6 km(3)/yr) and depletion rates (-2.8 +/- 0.8 km(3)/yr) with minimum balancing potential through aquifer capture processes, yet sustainability could be achieved by reducing annual extraction by 2.8 km(3), and (2) the MAS southern sections (Rub Al Khali Aquifer System (RAKAS)) are experiencing low groundwater depletion rates (eastern RAKAS: -1.8 +/- 1.4 mm/yr) to steady-state conditions (western RAKAS: -0.73 +/- 1.4 mm/yr). Geochemical, remote sensing, and field investigations over the RAKAS revealed: (1) the presence of west to east trending drainage networks and large-scale groundwater flow systems consistent with a meteoric source (precipitation over Red Sea Hills); (2) increasing Cl-36 model ages along groundwater flow directions (up to 970,000 years), indicating aquifer recharge in wet Pleistocene periods; (3) progressive depletion in the O and H stable isotopic compositions of aquifers with increasing distance from the Red Sea Hills basement outcrops, indicating modest recharge during prevailing dry conditions; and (4) the presence of relatively fresh (TDS: 800-2800 mg/L) and nonradioactive (Ra-226 + Ra-228 < 0.185 Bq/kg) water in western RAKAS. Findings suggest that sustainable agricultural development is achievable at current extraction rates in western RAKAS and provide a replicable and cost-effective model.

Fossil aquifers↗
DOE OSTI2020

A new soil mixing layer model for simulating conservative solute loss from initially saturated soil to surface runoff

Surface water pollution due to solute loss from soil to surface runoff is a serious threat to the environment, and it is of great significance to predict the solute loss. While soil mixing layer theory has been widely used to predict the solute loss, it has been observed that the conventional soil mixing layer models with constant mixing layer depth underestimate solute concentration in surface runoff, and thus underestimate the solute loss after surface runoff starts. This study introduced a new soil mixing layer model with a new concept that the mixing layer depth increases downward with time after surface runoff occurs. This new concept was implemented by adding a mixing front between the soil mixing layer and its underlying soil layer, which is conceptually similar to the wetting front of soil infiltration given by the Green-Ampt equation. This is equivalent to treating the soil mixing layer as a deforming control volume. A mechanistic explanation for the new model was presented. This study also developed a closed form solution of the new model. The new model was evaluated by simulating five laboratory experiments conducted by two groups of researchers. The first two experiments have ponding water, and consider different drainage and runoff conditions at both early and late runoff times. The other three experiments do not have ponding water, and consider different infiltration conditions at the bottom of soil boxes. Simulation results of the five experiments show that the new model resolves the underestimation problem of conventional soil mixing layer models. The new model is subject to a total of six limits such as that the new model only considers conservative solute. Three limits are related to the assumptions used to derive the closed form solution, and they may be alleviated in a future research as briefly discussed at the end of the paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Dynamics of streamflow permanence in a headwater network: Insights from catchment-scale model simulations

The hillslope and channel dynamics that govern streamflow permanence in headwater systems have important implications for ecosystem functioning and downstream water quality. Recent advancements in process-based, semi-distributed hydrologic models that build upon empirical studies of streamflow permanence in well-monitored headwater catchments show promise for characterizing the dynamics of streamflow permanence in headwater systems. However, few process-based models consider the continuum of hillslope-stream network connectivity as a control on streamflow permanence in headwater systems. The objective of this study was to expand a process-based, catchment-scale hydrologic model to better understand the spatiotemporal dynamics of headwater streamflow permanence and to identify controls of streamflow expansion and contraction in a headwater network. Further, we aimed to develop an approach that enhanced the fidelity of model simulations, yet required little additional data, with the intent that the model might be later transferred to catchments with limited long-term and spatially explicit measurements. This approach facilitated network-scale estimates of the controls of streamflow expansion and contraction, albeit with higher degrees of uncertainty in individual reaches due to data constraints. Our model simulated that streamflow permanence was highly dynamic in first-order reaches with steep slopes and variable contributing areas. The simulated stream network length ranged from nearly 98±2% of the geomorphic channel extent during wet periods to nearly 50±10% during dry periods. The model identified a discharge threshold of approximately 1 mm d –1 , above which the rate of streamflow expansion decreases by nearly an order of magnitude, indicating a lack of sensitivity of streamflow expansion to hydrologic forcing during high-flow periods. Overall, we demonstrate that process-based, catchment-scale models offer important insights on the controls of streamflow permanence, despite uncertainties and limitations of the model. We encourage researchers to increase data collection efforts and develop benchmarks to better evaluate such models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Forecasting Multi-Step-Ahead Street-Scale Nuisance Flooding using a seq2seq LSTM Surrogate Model for Real-Time Application in a Coastal-Urban City

In coastal-urban cities facing an elevated risk of nuisance flooding (by rain and tide) due to increased heavy rainfall, sea level rise, urbanization, and aging drainage systems, real-time flood forecasting at the street-scale can provide useful information to transportation decision-makers. Physics-Based Models (PBMs) that offer high accuracy come with high computational runtimes and costs that limit their application for real-time flood forecasting. To address this challenge, Machine Learning (ML) surrogate models trained from PBMs have been proposed to provide street-scale flood forecasts. Previous related studies have focused on using Long Short-Term Memory (LSTM) architectures to model hourly flood depth on streets. While LSTM models can capture input sequences effectively, they fall short in accurately preserving output sequences, limiting their suitability for multi-step-ahead forecasts. The seq2seq LSTM architecture offers a key advantage here by capturing the full sequence of input–output, making it potentially more suitable for multi-step-ahead flood forecasts compared to traditional LSTM models. However, seq2seq LSTM has not been tested for street-scale flood forecasting, particularly for rapidly fluctuating nuisance flooding events which require special attention to its temporal sequences. Hence, in this study, we applied the seq2seq LSTM model to explore multi-step-ahead street-scale nuisance flooding and compared its results to the traditional LSTM model as a benchmark model. LSTM and seq2seq LSTM surrogate models were applied to 22 flood-prone streets in Norfolk, Virginia, as a case study with a 4-hr (short-term) and 8-hr (long-term) lead time. The models were trained with environmental (rainfall and tide) and topographic (elevation, Topographic Wetness Index, and Depth-To-Water) features along with PBM-derived water depths for different storm events. The results demonstrated satisfactory performance of both LSTM and seq2seq LSTM surrogate models throughout the forecast period compared to the PBM. However, the seq2seq LSTM showed lower Mean Absolute Error (MAE)/ Root Mean Square Error (RMSE) and higher Nash–Sutcliffe Efficiency (NSE)/ correlation than the LSTM across most lead times, particularly for long-term forecasting due to its supremacy in handling both input–output sequences together, which is missing in the traditional LSTM. For example, in the long-term, the average RMSE ranges were 0.0268–0.0373 m for LSTM and 0.0226–0.0319 m for seq2seq LSTM, while in the short-term, they were 0.0263–0.0293 m and 0.0261–0.0283 m, respectively. Additionally, while both models exhibited similar performance in distinguishing flooded and non-flooded streets for flood depth ≥ 0.1 m, the seq2seq LSTM model demonstrated superior performance for higher flood depths (such as ≥ 0.2 m and ≥ 0.3 m). Once trained, inference took only 0.09 to 0.11 s (short-term) and 0.30 to 0.35 s (long-term) per storm event for the 22 streets, making the application highly suitable for real-time decision-making during nuisance flood events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluating post-fire watershed response to varying burn severity and precipitation regimes using fully-distributed and integrated hydrologic models

Wildfires can cause significant changes in vegetation and soil, which may lead to increased surface runoff and soil erosion, thereby affecting water cycling within ecosystems. This study uses the Advanced Terrestrial Simulator (ATS), an integrated and fully distributed hydrologic model at the watershed scale, to examine post-fire hydrologic responses in selected watersheds with varying burn severities in the Pacific Northwest region of the United States. The model integrates surface overland flow, subsurface flow, and canopy biophysical processes. We have developed a new fire module in ATS to account for changes in soil hydraulic properties caused by fire in the topsoil layer. Modeling results indicate that, in the year following a high-severity burn, watershed-averaged evapotranspiration decreases by 25%. Additionally, post-fire peak flows increase by 18-29% in watersheds burned with medium to high severity due to changes in soil properties. Conversely, a low-severity burn results in less than a 1% increase in post-fire peak flow. Furthermore, a high-severity fire causes a 38% reduction in the infiltration rate within the affected watershed during the first post-fire wet season. Hypothetical numerical experiments with varying precipitation regimes after a high-severity fire show that post-fire peak flows can increase by 1-29% due to fire-induced changes in soil hydraulic properties. This study highlights the importance of using fully distributed hydrologic models to quantify disturbance-feedback loops, which are essential for understanding the complexities brought about by spatial heterogeneity in post-fire landscapes.

ATS↗
DOE OSTI2022

Multimodal analysis and characterization of the boehmite layer formed on AA6061 before and after alkaline etching

Low-enriched uranium (LEU) alloyed with 10% Mo (U-10Mo) is being considered as a promising alternative to oxide-based dispersion fuel with high-enriched uranium for use in research reactors. The configuration of this proposed LEU monolithic LEU fuel plate consists of a U-10Mo plate-type fuel foil with a 25 µm zirconium interlayer barrier clad with an aluminum alloy (AA6061). In certain research reactors, the clad AA6061 is coated with a boehmite layer to prevent corrosion. The boehmite layer has a high-pH passivation range, which makes it resistant to oxidation. Boehmite is usually formed on the AA6061 surface by autoclave processing. Before the boehmite layer is added, the surface of the AA6061 is cleaned using techniques such as polishing and wet etching. In this study, we use multimodal analysis to examine how pretreatment of AA6061 using polishing followed by alkaline etching affects the chemical composition of the boehmite layer. X-ray photoelectron microscopy (XPS), transmission electron microscopy (TEM), and x-ray diffraction (XRD) were used to study the chemical changes in the boehmite layer caused by alkaline etching pretreatment. XPS provides quantitative analysis for the Al:O ratio as well as oxidation states present on the surface, which suggests slight oxidation of the boehmite surface after alkaline etching of the AA6061 surface. We further explored this suggested oxidation of the boehmite surface using high-resolution transmission electron microscopy with selected area electron diffraction (SAED) and grazing incidence x-ray diffraction (GI-XRD), which suggested only a small amount of aluminum oxide at the surface. The multimodal analysis and imaging yielded new insights for optimizing boehmite growth on AA6061 for research reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Corrosion protection of steel pipelines with metal-polymer composite barrier liners

Pipelines are efficient in transporting natural gas over large distances. Wet carbon dioxide present in pipelines can create an environment that is corrosive to steel. Polymer liners made from either polyethylene or polyamide (nylon) are presently used to mitigate internal corrosion in natural gas pipelines. Gas diffuses through all polymers over time, and polymer-only liners lower the steel corrosion rate by reducing the reactive gas flux to the internal surface of a pipeline. Composite liners, which incorporate one or more metallic layers that are impermeable to corrosive gases, offer better protection than polymer-only liners. In this study, we measured the methane, water vapor, and carbon dioxide permeability of a multi-layer barrier film and found it to be more effective in resisting gas permeation than polyethylene and nylon-11 films.

03 NATURAL GAS↗
DOE OSTI2020

A classical molecular dynamics simulation method for the formation of “dry” gels from boro-aluminosilicate glass structures

In contact with water, glass transforms into amorphous and porous structures called gels. A simulation method based on classical molecular dynamics is proposed here to mimic “dry” gels forming from initial oxide glass structures. Six glass compositions were investigated. Two behaviours were evidenced depending on the initial glass composition, and in particular on the quantity of elements removed. If a large quantity of soluble elements (B, Na) was removed, it induced an increase in the average pore size within the gels, and the time needed to stabilise the gel structure increased because more local atomic rearrangements occurred. The gel network displayed a higher proportion of Si-Q4 at the expense of Si-Q3 and a lower average ring size compared to the glass network, irrespective of the glass composition. Surface effects were also highlighted in the dry gels, such as the presence of 3-coordinated Al and a decrease in the average angle Si-O-Si and Al-O-Al. Our findings will be compared to both wet gels and experimental data in further studies, to help find the best procedure to simulate such structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigation of γ - ( U , Z r ) structural properties and its interfacial properties with liquid sodium using ab initio molecular dynamics

In this study, the elastic properties, structural parameters, sound velocity, and Debye temperature of γ–(U,Zr) were computed using ab initio molecular dynamics (AIMD) at temperatures between 1000 K and 1400 K and for Zr content between 0 at. % and 100 at. %. UZr is used as a metallic fuel for Sodium Fast Reactors (SFRs). The study of the mechanical and thermal behavior of these alloys leads to a better data-informed fuel design. The bulk modulus, shear modulus, Young's modulus, and Poisson's ratio were calculated from the elastic constants and their dependence on Zr content and temperature was investigated, comparing the results with previous computational work and the available experimental data in the literature. Interfacial properties between UZr (up to 32 at. % which typically exists in nuclear fuel) and liquid sodium are also of interest due to the presence of a sodium bond between the fuel and the cladding in metallic nuclear fuel. The interfacial energy between γ–(U,Zr) and liquid sodium, the surface tension of liquid sodium, and the work of adhesion were computed at different temperatures and Zr concentrations. It was demonstrated that γ–(U,Zr) is completely wetted by liquid sodium at all the investigated temperatures and Zr concentrations. Finally, this work provides the basis for the determination of interfacial resistances in SFRs and their implementation into heat transfer fuel performance simulations, which will be the subject of future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Identification of uranium oxidation states using oxygen K-edge scanning transmission X-ray microscopy

The field of nuclear forensics is growing in importance, and the increasing capabilities at synchrotron radiation light sources enable non-destructive characterization of oxide particles with better spatial, compositional, and oxidation state speciation resolution than ever before. Here, uranium oxide particles derived from multiple wet chemical processing methods were examined using a scanning transmission X-ray microscope (STXM), and a weakly-supervised method was developed to automatically analyze the collected data. Multiple uranium oxidation states were observed and quantified within and between samples, yielding information about differences between particles produced via the various processing routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

GaAs solar cells grown on acoustically spalled GaAs substrates with 27% efficiency

Acoustic spalling presents a potentially low-cost reuse pathway for III–V epitaxial growth substrates via exfoliation of device layers with recovery and reuse of the substrate. However, surface features formed during spalling can reduce the performance of subsequently grown devices. Here, we develop an understanding of how the surface morphology of acoustically spalled substrates affects GaAs solar cell performance and develop strategies to mitigate these impacts. We demonstrate that minor planarization of the surface by wet chemical etching and/or epitaxial growth, or the redesign of the device structure to thicken critical layers, prevents performance degradation. Using these strategies, we demonstrate a 0.25 cm 2 single-junction GaAs device with 26.9% ± 0.2% photovoltaic conversion efficiency under the AM1.5G spectrum grown on an acoustically spalled substrate. These results enable the growth of high-performance III–V devices on non-traditional substrates with the potential for significantly reduced device costs.

14 SOLAR ENERGY↗
DOE OSTI2020

Towards a high-performance garnet-based solid-state Li metal battery: A perspective on recent advances

Garnet-based solid-state Li metal batteries have been widely considered one of the most promising next-generation energy storage systems. However, the performance of these batteries is plagued by various limitations caused by the solid-state electrolyte (SSE). The poor wetting of lithium on the garnet surface diminishes the contact between the anode and electrolyte, leading to extremely high anode interfacial resistance. Similarly, the point-to-point contact between the cathode and electrolyte leads to high impedance on the cathode side. Moreover, although the SSE serves a firm barrier separating the anode and cathode, lithium dendrites can still grow through, causing a short circuit. Lastly, the solid/solid interface cannot be well maintained under cycling at high current density and capacity. Recently, remarkable progress has been achieved in garnet electrolyte to resolve these problems towards the aim of a high-performance solid-state Li metal battery. In this perspective, we highlight various recent advances in the field of garnet-based solid-state battery, including improving the anode/electrolyte interface, lithium dendrite detection, reducing cathode impedance, and electrolyte architecture design.

25 ENERGY STORAGE↗
DOE OSTI2022

Integration of a high oxygen permeability ionomer into polymer electrolyte membrane fuel cell cathodes for high efficiency and power density

In this work, we present a study on the integration of a high oxygen permeability ionomer (HOPI) with high durability carbon supported platinum (Pt/C) catalysts to prepare cathode catalyst layers (CCLs) for polymer electrolyte membrane fuel cells (PEMFCs). A key motivation is the production of PEMFCs with high efficiency and durability for heavy-duty fuel cell vehicles. Our results from integrating a pre-commercial HOPI with robust, state-of-the-art catalysts with medium and low surface area carbon supports show significant increases in specific activities (67% increase over the standard commercial ionomer) at low current densities and reduced oxygen (O 2 ) transport resistances (R O2 ’s) at high current densities, enabling both higher efficiency and peak power density. The reduction in the R O2 with the HOPI is most significant at low relative humidity (RH), due to its more rigid backbone structure resisting compaction at lower water contents. In our ink optimization analysis, we show that the HOPI in this study achieves its peak performance with an ionomer to carbon ratio (I/C) of 0.6 and a moderately alcohol-rich ink solvent when fabricating catalyst layers by the decal method with an automatic wet film coater.

08 HYDROGEN↗
DOE OSTI2022

SEI formation mechanisms and Li + dissolution in lithium metal anodes: Impact of the electrolyte composition and the electrolyte-to-anode ratio

The lithium metal battery is one of today's most promising high-energy-density storage devices. Its full-scale implementation depends on solving operational and safety issues intrinsic to the Li metal high reactivity leading to uncontrolled electrolyte decomposition and uneven Li deposition. In this work, we study the spontaneous formation of the solid electrolyte interphase (SEI) upon contact of Li metal with the electrolyte and describe the heterogeneous SEI morphological features. Multiple electrolyte formulations based on lithium bis(fluorosulfonyl)imide (LiFSI), dimethoxyethane (DME), dimethyl carbonate (DMC), 1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) and bis(2,2,2-trifluoroethyl) ether (BTFE) are used. Findings include the description of the SEI evolution from dispersed LiO, LiS, LiN, and LiF clusters to a continuous and compact inorganic phase in which the LiO and LiF content depend on the presence of fluorine diluents. Further, the role of the DME ether solvent helping the growth of a “wet-SEI” is compared to that of the highly unstable carbonate DMC, which decomposes into complex radical oligomers that might contribute to further electrolyte decomposition. The impact of the electrolyte-to-anode ratio on LiFSI decomposition is highlighted. Finally, we suggest the existence of a critical LiFSI concentration and electrolyte-to-anode ratio that could potentially balance the rate of electrolyte depletion and lithium consumption.

25 ENERGY STORAGE↗
DOE OSTI2023

Sequential separation of battery electrode materials and metal foils in aqueous media

To recycle high-value lithium-ion battery components, it is imperative to efficiently separate electrode materials from current collector foils and to separate cathodes from anodes. This study investigates the delamination behaviors of cathodes and anodes from their respective current collectors in aqueous media. Whereas anode films can easily detach from copper foils in water, the delamination of cathode films does not exhibit the same behavior in water; instead, the cation exchange reaction results in lithium leaching and aluminum corrosion in the presence of water. Here, a buffer solution with surfactant additives has been designed to prevent aluminum corrosion and to improve solution wetting behavior, thereby facilitating cathode delamination. The delamination difference enables the sequential recovery of electrode materials and metal foils at different separation stages, simplifying the traditionally intricate processes within a one-pot recovery system. The recovered materials retain their crystal structure and morphology, and there are no signs of aluminum corrosion or residues on the metal foils. The sequential separation technique achieves nearly 100% separation efficiency for electrode materials from metal foils and over 98% separation efficiency for cathode and anode materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Characterization of ultrafast-laser ablation of micro-structures in Li-ion battery anode and cathode materials: Morphology, rate, and efficiency

Characterization of the rate and quality of ultrafast-laser ablation of Li-ion battery (LIB) electrode materials is presented for a collection of common and next-generation electrodes. Laser ablated micro-structures on the surface of LIB electrodes have been shown to provide dramatic enhancement of high-rate capability and electrode wetting. However, industrial adoption is hampered by a lack of data enabling informed choice of laser parameters and predicting process throughput. Here this work bridges this gap by providing characterization of the ablation process at more laser parameters (laser fluence and number of pulses used) than are currently available in the literature. Further, we expand on previous graphite and lithium iron phosphate (LFP) ablation work by extending ablation characterization to new LIB materials, providing high data resolution and adopting new characterization metrics which are relevant for industrial application of this technology. Ablated pores are characterized by their ablated depth, volume, and how the depth and volume ablation rate changes as a function of pore depth. Finally, we provide a detailed characterization of the morphology of laser ablated micro-structures which informs how material and laser parameters affect the quality of laser-processed electrodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Long carbon fibers boost performance of dry processed Li-ion battery electrodes

Dry processing (DP) is an advanced manufacturing technique for lithium-ion battery (LIB) electrodes. Unlike conventional wet-process-based manufacturing that involves dissolving polyvinylidene fluoride (PVDF) binder in n-methyl-2-pyrrolidone (NMP) solvent for slurry-casting, DP involves fibrillation of polymer binders. This method offers environmental and cost benefits by eliminating the need for expensive and environmentally hazardous organic solvents. However, DP-produced electrode films often lack mechanical stability due to the absence of a current collector substrate during electrode material layer fabrication. This reduced mechanical instability results in difficulty during fabricating of thin electrodes (≈5 mAh/cm 2 ). To address this issue, long (>8 mm) carbon fiber (CF) has been incorporated to reinforce the mechanical strength of the electrode films. In conclusion, the study demonstrates that the inclusion of long carbon fiber boosts the mechanical, electrical, thermal, and electrochemical performance of DP electrodes.

25 ENERGY STORAGE↗
DOE OSTI2025

High spatial resolution neutron imaging of lithium-ion batteries: Correlating microstructure and lithium transport

Thick electrodes for lithium-ion batteries can increase the overall energy density, but increasing the electrode thickness introduces charge transport limitations. These limitations may be mitigated through proper electrode structuring. Here, high spatial resolution neutron imaging was used to understand the correlation between microstructure and lithium transport in lithium-ion anodes. Batteries with distinct graphite anode microstructures were produced and studied with high spatial resolution in operando neutron radiography to observe the effects of structure on transport. High spatial resolution neutron computed tomography was performed following in operando neutron radiography. X-ray computed tomography and scanning electron microscopy were used to observe the finer scale anode structure to complement neutron imaging. Solvent-free anodes containing a tightly-packed layered structure confined lithium movement close to the separator. This structure limited capacity, but supported better rate capability. Conversely, a more open pore structure in the wet cast anodes yielded higher capacity with reduced rate capability. Together, these results show that lithium distributions can be controlled by the macroscopic structure of the electrodes, the microstructural pore network, and the microscale active areas that support electrochemical reactions. Furthermore, multimodal imaging applying the complementary strengths of neutron and X-ray methods is shown as a tool for advancing battery design.

25 ENERGY STORAGE↗