Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “turning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Crystallographic orientation variation of isothermal pearlite under high magnetic field

Crystallographic orientation (CO) variation of magnetic-induced pearlite (MIP) during its microstructure evolution in 19.8 T was investigated by electron back-scatter diffraction (EBSD). It is closely related to the isothermal temperatures (ITs) and the applied magnetic time (MT) during the process of MIP formation. The <100> easy magnetization direction in MIP colonies is strengthened with the MT within the certain transformed fraction of MIP (f{sub MIP}) at the relatively lower IT (983 K) above the eutectoid temperature but below the magnetically shifted upward eutectoid temperature, while this special CO tends to be weakened at a relatively higher IT (995 K). For the same MT, the higher the IT, the relatively larger is the proportion in <100> orientation for MIP colonies at the early growth stage. These results have demonstrated that the change of <100> orientation of MIP is closely related to the growth rate of pearlite ferrite (PF), and strengthened mainly at early transformation stage. When f{sub MIP} reaches some value, the growth rate of MIP at other COs, such as <110>, even at the hard magnetization direction, turns to present speed-up. - Highlights: • HMF can induce pearlite with different fractions above the eutectoid temperature. • CO is closely related to isothermal temperatures and applied magnetic time. • <100> direction is related to the growth rate of PF, and strengthened at early stage. • When f{sub MIP} reaches some value, the growth rate at other COs turns to present speed-up.

36 MATERIALS SCIENCE↗

Texture evolution, phase transformation and mechanical properties of selective laser melted Ti-13Nb-13Zr

Highlights: • The crystallographic texture orientation of Ti-13Nb-13Zr alloy was tailored. • The evolution of the volume fraction of α′ phase was investigated. • The phase transformation was discussed using TEM/HRTEM observations. • The elastic moduli of α′ and β phases have been calculated. - Abstract: The crystallographic texture and phase composition associated with the performance of materials have been well documented, but there are very few studies on their controlling strategies. In this work, the crystallographic texture orientation and phase transformation of Ti-13Nb-13Zr alloy were tailored for the first time by selective laser melting with different scanning strategies. <011> crystal orientation along the building direction is preferred in sample A (unidirectional scanning along one axis), while <001> is preferred in sample B (unidirectional scanning with a 90° rotation in each layer). The evolution of the volume fraction of α′ phase was investigated using X-ray photoelectron spectroscopy. The results indicated that sample B has the highest content of α′ phasein sample B. The hardness and wear resistance have been studied through nanoindentation and the results turn out that all samples show higher hardness and better wear resistance (hin sample B. The hardness and wear resistance have been studied through nanoindentation and the results turn out that all samples show higher hardness and better wear resistance (higher H{sub d}/E{sub r} and H{sub d}{sup 3}/E{sub r}{sup 2} ratios) than widely used CP Ti. A simple micromechanical model was used to calculate the elastic moduli of α′ and β phases, which were determined to be 151 GPa and 64 GPa, respectively.

36 MATERIALS SCIENCE↗

Synthesis of vertically aligned boron nitride nanosheets using CVD method

Highlights: ► The synthesized boron nitride nanosheets (BNNSs) are vertically aligned and very thin. ► No electrical field is applied in the CVD process. ► The thin BNNSs show a low turn-on field of 6.5 V μm{sup −1} and emit strong UV light. -- Abstract: Boron nitride nanosheets (BNNSs) protruding from boron nitride (BN) films were synthesized on silicon substrates by chemical vapor deposition technique from a gas mixture of BCl{sub 3}–NH{sub 3}–H{sub 2}–N{sub 2}. Parts of the as-grown nanosheets were vertically aligned on the BN films. The morphology and structure of the synthesized BNNSs were characterized by scanning electron microscopy, transmission electron microscopy, and Fourier transformation infrared spectroscopy. The chemical composition was studied by energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Cathodoluminescence spectra revealed that the product emitted strong UV light with a broad band ranging from 250 to 400 nm. Field-emission characteristic of the product shows a low turn-on field of 6.5 V μm{sup −1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of crystalline carbon nanofern-like structure by dc-PECVD and study of its electrical and field emission properties

Graphical abstract: Display Omitted Highlights: ► Branched, carbon nanofern like structure have been synthesized on glass substrate via PECVD. ► Ni catalyst played important role in growing such structure. ► The as prepared sample shows good field emission property with turn on field as low as 4.8 V/mm. ► Temperature dependent conductivity of the sample showed non-linearity. -- Abstract: Carbon nanofern-like structure was synthesized by direct current plasma enhanced chemical vapor deposition at 400 °C using acetylene as carbon precursor and nickel particle as seed. High resolution transmission electron microscopy (HRTEM) study confirmed the fern-like structure of the as-synthesized sample. It was seen that when nickel was not used a cluster deposition took place without forming any structure. Atomic force microscopy study showed the surface topology of the as-prepared samples. X-ray photoelectron spectroscopy as well as HRTEM studies confirmed the presence of nickel in the carbon matrix. Current (I)–voltage (V) characteristics have been taken for three different temperatures. A non-linear I–V characteristic was obtained for the fern like sample. Field emission study showed that carbon nanofern showed efficient field emission with a turn-on field as low as 4.8 V/μm. Also, the field emission has been studied for different inter-electrode distances.

36 MATERIALS SCIENCE↗

Can ionic liquids be used as templating agents for controlled design of uranium-containing nanomaterials?

Graphical abstract: - Highlights: • Uranium oxides nanoparticles prepared using ionic liquids. • IL cation alkyl length impacts oxide morphology. • Low temperature UO{sub 2} synthesis. - Abstract: Nanostructured uranium oxides have been prepared in ionic liquids as templating agents. Using the ionic liquids as reaction media for inorganic nanomaterials takes advantage of the pre-organized structure of the ionic liquids which in turn controls the morphology of the inorganic nanomaterials. Variation of ionic liquid cation structure was investigated to determine the impact on the uranium oxide morphologies. For two ionic liquid cations, increasing the alkyl chain length increases the aspect ratio of the resulting nanostructured oxides. Understanding the resulting metal oxide morphologies could enhance fuel stability and design.

36 MATERIALS SCIENCE↗

Fabrication and characterization of n-ZnO:Eu/p-ZnO:(Ag, N) homojunction by spray pyrolysis

Graphical abstract: In this paper authors report the fabrication of ZnO homojunction by the deposition of 2 at.% Eu doped ZnO (n-ZnO:Eu) layer grown over the 4 at.% Ag–N dual acceptor doped ZnO (p-ZnO:(Ag, N)) layer by spray pyrolysis technique. The as-grown n-type and p-type ZnO films on glass substrates have been characterized by Hall measurements, X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), UV–vis and luminescence spectroscopy techniques. Hall measurement shows that 4 at.% ZnO:(Ag, N) film exhibits p-type conductivity with high hole concentration of 2.17 × 10{sup 18} cm{sup −3} and n-type conductivity is observed in the ZnO:Eu film. The current–voltage characteristics measured from the two-layer structure show typical rectifying characteristics of p–n homojunction with a low turn on voltage of about 1.85 V. I–V characteristics of the n-ZnO:Eu/p-ZnO:(Ag, N) homojunction. - Highlights: • The n-ZnO:Eu/p-ZnO:(Ag, N) homojunction is fabricated and characterized. • Low resistive and stable p-type ZnO films are achieved by dual acceptor-doping. • Homojunction with best dual-doped ZnO film shows good rectifying characteristics. • The fabricated ZnO homojunction is suitable for optoelectronic devices. - Abstract: In the present study, the authors report the fabrication of ZnO homojunction by the deposition of 2 at.% Eu doped ZnO (n-ZnO:Eu) layer grown over the 4 at.% Ag–N dual acceptor doped ZnO (p-ZnO:(Ag, N)) layer by spray pyrolysis technique. The as-grown n-type and p-type ZnO films on glass substrates have been characterized by Hall measurements, X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), UV–vis and luminescence spectroscopy techniques. Hall measurement shows that 4 at.% ZnO:(Ag, N) film exhibits p-type conductivity with high hole concentration of 2.17 × 10{sup 18} cm{sup −3} and n-type conductivity is observed in the ZnO:Eu film. The current–voltage characteristics measured from the two-layer structure show typical rectifying characteristics of p–n homojunction with a low turn on voltage of about 1.85 V.

36 MATERIALS SCIENCE↗

Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}: A novel blue emitting phosphor for white LEDs

Graphical abstract: Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs. - Highlights: • Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band under the 350 nm radiation excitation. • Emission intensity of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is 63.4% (150 °C) of the initial value (30 °C). • The activation energy ΔE for thermal quenching is 0.25 eV. - Abstract: A novel blue emitting phosphor Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is synthesized by a high temperature solid state method. The luminescent property and the thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} are investigated. Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band, and the peak locates at 417 nm which is assigned to the 5d{sup 1}–4f{sup 1} transition of Ce{sup 3+}. It is further proved that the dipole–dipole interaction results in the concentration quenching of Ce{sup 3+} in Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs.

36 MATERIALS SCIENCE↗

Remarkably improved field emission of TiO{sub 2} nanotube arrays by annealing atmosphere engineering

Highlights: • TNAs were prepared by anodization and annealed in different atmospheres. • The crystal structure and electronic properties of the prepared TNAs were investigated. • The field emission of TNAs was highly dependent on annealing atmosphere. • A low turn-on of 2.44 V/μm was obtained for TNAs annealed in H{sub 2} atmosphere. - Abstract: Highly ordered TiO{sub 2} nanotube arrays (TNAs) were prepared by anodization, and followed by annealing in the atmospheres of Air, Vacuum, Ar, and H{sub 2}. The effect of annealing atmosphere on the crystal structure, composition, and electronic properties of TNAs were systematically investigated. Raman and EDS results indicated that the TNAs annealed in anaerobic atmospheres contained more oxygen vacancies, which result in the substantially improved electron transport properties and reduced work function. Moreover, it was found that the FE properties of TNAs were highly dependent on the annealing atmosphere. By engineering the annealing atmosphere, the turn-on field as low as 2.44 V/μm can be obtained from TNAs annealed in H{sub 2}, which was much lower than the value of 18.23 V/μm from the TNAs annealed in the commonly used atmosphere of Air. Our work suggests an instructive and attractive way to fabricate high performance TNAs field emitters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CaCoSO diluted magnetic antiferromagnet semiconductor as efficient thermoelectric materials

Highlights: • CaCoSO exhibit direct (Γ{sup v}- Γ{sup c}) gap of about 2.187 eV for spin-up (↑). • CaCoSO exhibit direct (K{sup v}-K{sup c}) gap of about 1.187 eV for spin-down(↓). • An indirect gap (Γ{sup v}-K{sup c}) of about 0.4 eV for the spin-polarized CaCoSO. • Small gap turn CaCoSO to be as promising candidate for thermoelectric materials. - Abstract: We have reported the thermoelectric properties of the recently synthesized CaCoSO single crystal by Salter et al. in 2016. It is quite interesting to mention that CaCoSO single crystals exhibit a direct energy gap (Γ{sup v}- Γ{sup c}) of about 2.187 eV for the spin-up (↑) channel, which turns out to be a (K{sup v}-K{sup c}) direct gap of about 1.187 eV for the spin-down (↓) channel, resulting in an indirect gap (Γ{sup v}-K{sup c}) of about 0.4 eV for the spin-polarized CaCoSO single crystal. Such a small gap makes CaCoSO a promising candidate for thermoelectric materials. Calculations reveal a remarkable finding that the CaCoSO single crystal exhibits high electrical conductivity, low thermal conductivity and a large Seebeck coefficient; therefore, based on these findings, the CaCoSO single crystal may be considered an efficient thermoelectric material. The electron clouds of CaO{sub 3}S{sub 4} and CoS{sub 3}O exhibit a planar shape with conjugated electron orbitals and exhibit a strong covalent Ca−O, Co−O bonding. This is another factor which makes CaCoSO a promising candidate for thermoelectric materials, since covalent bonding is more favorable for the transport of the carriers than ionic bonding. CaO{sub 3}S{sub 4} and CoS{sub 3}O are the main sources for the thermoelectric generator in CaCoSO. Therefore, based on the above findings, we can conclude that CaCoSO could be a promising thermoelectric material.

36 MATERIALS SCIENCE↗

Nanocrystalline MgCr{sub x}Al{sub 2-x}O{sub 4}: Facile synthesis and thermal dependency of photoluminescence

Highlights: • Red emitting MgCr{sub x}Al{sub 2-x}O{sub 4} Hexagonal sheet like nanoparticles synthesized. • Annealing improved crystallinity and material turned pink at 1200 °C. • The R-line was intense but sidebands are less pronounced than in ZnAl{sub 2}O{sub 4} host. • High Dq/B confirm strong field relating PL with spin-parity forbidden transitions. • The lifetimes ranged between 20 and 24 ms much higher than reports. - Abstract: MgCr{sub x}Al{sub 2-x}O{sub 4} nanoparticles were synthesized by facile co-precipitation method. The x = 0.02 sample showed intense emission and considered for studying the effect of annealing temperature (500–1200 °C) on the structural and optical properties. On annealing, crystallinity improved and the material gradually turned pink at 1200 °C. Hexagonal sheet-like nanoparticles (∼52 nm) were observed by HRTEM and the lattice fringes suggested their single crystalline nature. Excitation spectra showed two peaks at 546 and 419 nm where the latter was asymmetric, attributable to the trigonal distortion. The photoluminescence consisted of intense zero-phonon line and associated multi-phonon side bands, whose intensities increased with annealing. Higher Dq/B (3.5), confirmed strong crystal field for Cr{sup 3+}, suggesting that the photoluminescence emission could be associated with spin-parity forbidden transitions. The emission lifetimes (λ{sub em} = 688 nm) ranged between ∼20 and 24 ms. Other oxide nanoparticles suitable for phosphors, biomarkers, etc. can be conveniently synthesized similarly.

36 MATERIALS SCIENCE↗

Comparative Studies of Optoelectrical Properties of Prominent PV Materials: Halide Perovskite, CdTe, and GaAs

We compare three representative high performance PV materials: halide perovskite MAPbI3, CdTe, and GaAs, in terms of photoluminescence (PL) efficiency, PL lineshape, carrier diffusion, and surface recombination and passivation, over multiple orders of photo-excitation density or carrier density appropriate for different applications. An analytic model is used to describe the excitation density dependence of PL intensity and extract the internal PL efficiency and multiple pertinent recombination parameters. A PL imaging technique is used to obtain carrier diffusion length without using a PL quencher, thus, free of unintended influence beyond pure diffusion. Our results show that perovskite samples tend to exhibit lower Shockley-Read-Hall (SRH) recombination rate in both bulk and surface, thus higher PL efficiency than the inorganic counterparts, particularly under low excitation density, even with no or preliminary surface passivation. PL lineshape and diffusion analysis indicate that there is considerable structural disordering in the perovskite materials, and thus photo-generated carriers are not in global thermal equilibrium, which in turn suppresses the nonradiative recombination. This study suggests that relatively low point-defect density, less detrimental surface recombination, and moderate structural disordering contribute to the high PV efficiency in the perovskite. This comparative photovoltaics study provides more insights into the fundamental material science and the search for optimal device designs by learning from different technologies.

14 SOLAR ENERGY↗

Beam position monitor gate functionality implementation and applications

We introduce a novel technique to implement gate functionality for the beam position monitors (BPM) at the National Synchrotron Light Source II (NSLS-II). The functionality, now implemented in FPGA, allows us to acquire two separated bunch-trains’ synchronized turn-by-turn (TBT) data simultaneously with the NSLS-II in-house developed BPM system. The gated position resolution is improved about 3 times by narrowing the sampling width. Experimentally we demonstrated that the machine lattice could be transparently characterized with the gated TBT data of a short diagnostic bunch-train Cheng et al., 2017; Li et al., 2017. Other applications, for example, precisely characterizing storage ring impedance/wake-field through recording the beam positions of two separated bunch trains has been experimentally demonstrated.

43 PARTICLE ACCELERATORS↗

Design and Prototyping of an Ionization Profile Monitor for the SNS Accumulator Ring

An ionization profile monitor (IPM) has been designed for the Spallation Neutron Source (SNS) accumulator ring. Utilizing ionized electrons produced by beam-gas ionization, the SNS IPM uses a 120 kV bias potential to overcome beam space charge and accelerate electrons towards a movable particle detector. A 300 G magnetic field is used to confine the transverse electron motion, resulting in profile errors at the estimated 7% level. With a system bandwidth of 17.5 MHz. The SNS IPM is capable of measuring turn-by-turn beam profiles for a fully accumulated beam. This paper presents a description of the system and design.

Bartkoski, Dirk A↗

Transverse profile of the electron beam for the RHIC electron lenses

To compensate for the beam-beam effects from the proton-proton interactions at the two interaction points IP6 and IP8 in the Relativistic Heavy Ion Collider (RHIC), we are constructing two electron lenses (e-lenses) that we plan to install in the interaction region IR10. Before installing them, the electron gun, collector, instrumentation were tested and the electron beam properties were qualified on an electron lens test bench. We will present the test results and discuss our measurement of the electron beam current and of the electron gun perveance. We achieved a maximum current of 1 A with 5 kV energy for both the pulsed- and the DC-beam (which is a long turn-by-turn pulse beam). We measured beam transverse profiles with an Yttrium Aluminum Garnet (YAG) screen and pinhole detector, and compared those to simulated beam profiles. Measurements of the pulsed electron beam stability were obtained by measuring the modulator voltage.

43 PARTICLE ACCELERATORS↗

Beam studies at the SPEAR3 synchrotron using a digital optical mask

The 3GeV SPEAR3 synchrotron light source operates in top-up injection mode with up to 500 mA circulating in the storage ring (equivalently 392 nC). Each injection pulse contains 40–80 pC producing a contrast ratio between total stored charge and injected charge of about 6500:1. In order to study transient injected beam dynamics during user operations, it is desirable to optically image the injected pulse in the presence of the bright stored beam. In the present work this is done by imaging the visible component of the synchrotron radiation onto a digital micro-mirror-array device (DMD), which is then used as an optical mask to block out light from the bright central core of the stored beam. The physical masking, together with an asynchronously-gated, ICCD imaging camera, makes it possible to observe the weak injected beam component on a turn-by-turn basis. The DMD optical masking system works similar to a classical solar coronagraph but has some distinct practical advantages: i.e. rapid adaption to changes in the shape of the stored beam, a high extinction ratio for unwanted light and minimum scattering from the primary beam into the secondary optics. In this paper we describe the DMD masking method, features of the high dynamic range point spread function for the SPEAR3 optical beam line and measurements of the injected beam in the presence of the stored beam.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Implementing nonlinear optics from Off-Energy closed orbit at NSLS-II

To characterize the second-order (chromatic sextupole) magnet lattice with high precision, we implemented nonlinear optics from off-energy closed orbit (NOECO) tool based on the linear optics from closed orbit modulation (LOCOM) method, named LOCOM-NOECO. The preliminary numerical study indicates that 1–2% precision can be achieved for the calibration of chromatic sextupoles. Further, this accuracy could potentially help in resolving some long-standing challenges of NSLS-II (e.g., the discrepancy between the designed and measured dynamic apertures) if such high precision can be fulfilled. As an independent crosscheck, we also implemented NOECO based on the independent component analysis (ICA) method using turn-by-turn (TBT) BPM data, named ICA-NOECO. Both ICA-NOECO and LOCOM-NOECO have been successfully applied to identify the pre-dialed random errors of a chromatic sextupole family including five power supplies, and achieved the root mean square (RMS) residual error of 1% and peak error less than 2%. Moreover, to mitigate the chromatic sextupole error effect, we applied the correction and achieved significant improvements in the injection efficiency as well as the dynamic apertures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis and magnetic performance of gadolinium powder produced with rotating disk atomization

Spherical powder is key for achieving good heat transfer and maintaining low pressure drop for heat transfer fluid in magnetocaloric regenerator. Obtaining relatively large spherical powder of rare earth metals that are extremely sensitive to oxygen is challenging. Comparing to gas atomization and plasma rotating electrode methods, rotating disk atomization (RDA) method is more robust for obtaining a small amount of powder with a short turn-around time, thereby, more suitable for research and development of new magnetocaloric materials. In this work, commercially bulk gadolinium was successfully atomized to produce spherical powder in the targeted 150–250 μm range. The obtained powder exhibited the expected magnetocaloric performance with a maximum change of magnetic entropy of 12.1 J/kg K and a maximum adiabatic temperature change of 12.8 K with an applied magnetic field of 7 T.

36 MATERIALS SCIENCE↗

Spatiotemporal dynamics of nitrogen dioxide pollution and urban development: Satellite observations over China, 2005–2016

China experienced rapid urbanization and industrialization in recent years, which resulted in large increases of nitrogen dioxide (NO2), particularly in urban areas. We analyze the spatiotemporal variations of the vertical column densities (VCDs) of tropospheric NO2 with the level of urban development across China during the period 2005-2016. Nighttime light (NTL) data are applied as a proxy for urban development to investigate the relationship between NO, pollution and urban development. Both NO2 column data and NTL data are observed by satellite measurements. The annual mean of NO2 VCDs is presented on a grid basis. The average annual variations of NO2 VCDs and NTL value are detected for all 341 prefectural cities. Two-thirds of the cities reached their peak NO2 pollution level around 2010-2012, and decreased afterward. About 10% of the western cities kept on increasing their NO2 levels until 2016. All cities are classified into four categories with respect to the average annual variations of NO2/NTL in 2005-2010, and 2011-2016. Approximately 62% of the cities turned the average annual variations of NO2/NTL from positive to negative. 19% of the cities are in the positive-positive category and 11% of the cities are in the negative-negative category. The remaining 8% of the cities changed their ratios from negative to positive. We summarize the national air pollution regulations, and our results show the effectiveness of the regulations for most eastern China cities. This work can help to design more efficient regional emission reduction policies with sustainable development.

nighttime light data↗