Characterization of High Level Waste from a Hybrid LIFE Engine for Enhanced Repository Performance
In the interest of providing unlimited greenhouse gas-free energy at low cost, the Laser Inertial Fusion Energy (LIFE) project provides a testbed for inertial confinement fusion technology. Proposed designs are a pure fusion reactor or a hybrid fusion-fission reactor, which includes a subcritical blanket of fissionable material to be irradiated by neutrons from the fusion reaction. Two possible fuels are considered: (1) used fuel from current reactors; (2) thorium. Amounts of high level waste (HLW) generated per kilowatt-hour (kW*h) produced are lower relative to current Light Water Reactors (LWR), but potential hazard associated with 1 ton of HLW from LIFE is superior. The scope of this study is to combine quantities and qualities of HLW from LIFE and determine the repository space required relative to HLW from LWR for a once through fuel cycle. Repository space was determined in terms of number of canisters required disposal of waste in the production of 1 kW*h. HLW properties were determined using the Oak Ridge Isotope GENeration code (ORIGEN-S) and waste was conditioned and stored in borosilicate glass. For a LWR, the fuel was burnt to 50 gigawatt-days per tonne heavy metal (GWd/tHM) then reprocessed through Plutonium Uranium Extraction (PUREX). For LIFE, fuel burnup varied from 478.6 to 971.8 GWd/tHM and both PUREX reprocessing and conditioning with no separation were analyzed. HLW load per canister was determined for each fuel by combining mass, decay heat, and composition constraints, but the decay heat constraint was eliminated, allowing the spent fuel to cool before solidification. If PUREX reprocessing is applied, LIFE requires 1.47E-10 and 1.39E-10 canisters per kW*h for used fuel and thorium fuel, respectively. A LWR requires 1.56E-10 canisters per kW*h. Limiting constraints for LIFE spent fuel were mass of the canister, mass fraction of the glass frit, or molybdenum trioxide mass fraction. If uranium and plutonium are not separated from LIFE spent fuel, then 2.10E-10 and 1.96E-10 canisters are required per kW*h, for the used fuel and thorium fuel, respectively. Required number of canisters decreases with increased fuel burnup. HLW waste disposal of LIFE is not only feasible, but more efficient than LWR with separation per kW*h. High burnups of LIFE offer the greatest waste performance benefit. Limitations of the study include assumption of generic processing or PUREX extraction for LIFE fuel. Future work will include environmental impact after canister failure.