Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “synthesis science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

We propose an efficient and clean avenue for ammonia synthesis, via electroreduction of nitrate which could be obtained from industrial wastewater, domestic sewage, sodium nitrate ore, and nitrification of bacteria and electrochemical oxidation of nitrogen, which addresses the water pollution issues and simultaneously upgrades the nitrate to high-value ammonia. At a low overpotential of -0.15 V versus RHE, Cu nanosheets achieved an ammonia formation rate of 390.1 μg mg -1 Cu h -1 and a Faradaic efficiency of 99.7%, attributed to suppression of the HER activity and apparent improvement of the rate of rate-determining step on Cu (111). Such an ammonia formation rate is more than two orders of magnitude higher than electrochemical nitrogen reduction reaction to ammonia. This work not only develops a powerful strategy to the rational design of robust and efficient catalysts by crystal facet engineering, but also provides an alternative route for electrochemical ammonia synthesis by reduction of nitrate.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cell-free styrene biosynthesis at high titers

Styrene is an important petroleum-derived molecule that is polymerized to make versatile plastics, including disposable silverware and foamed packaging materials. Finding more sustainable methods, such as biosynthesis, for producing styrene is essential due to the increasing severity of climate change as well as the limited supply of fossil fuels. Recent metabolic engineering efforts have enabled the biological production of styrene in Escherichia coli, but styrene toxicity and volatility limit biosynthesis in cells. To address these limitations, we have developed a cell-free styrene biosynthesis platform. The cell-free system provides an open reaction environment without cell viability constraints, which allows exquisite control over reaction conditions and greater carbon flux toward product formation rather than cell growth. The two biosynthetic enzymes required for styrene production were generated via cell-free protein synthesis and mixed in defined ratios with supplemented L-phenylalanine and buffer. By altering the time, temperature, pH, and enzyme concentrations in the reaction, this approach increased the cell-free titer of styrene from 5.36 ± 0.63 mM to 40.33 ± 1.03 mM, the highest amount achieved using biosynthesis without process modifications and product removal strategies. Finally, cell-free systems offer a complimentary approach to cellular synthesis of small molecules, which can provide particular benefits for producing toxic molecules.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

A global dataset of terrestrial biological nitrogen fixation

Biological nitrogen fixation (BNF) is the main natural source of new nitrogen inputs in terrestrial ecosystems, supporting terrestrial productivity, carbon uptake, and other Earth system processes. We assembled a comprehensive global dataset of field measurements of BNF in all major N-fixing niches across natural terrestrial biomes derived from the analysis of 376 BNF studies. The dataset comprises 32 variables, including site location, biome type, N-fixing niche, sampling year, quantification method, BNF rate (kg N ha −1 y −1 ), the percentage of nitrogen derived from the atmosphere (%N dfa ), N fixer or N-fixing substrate abundance, BNF rate per unit of N fixer abundance, and species identity. Overall, the dataset combines 1,207 BNF rates for trees, shrubs, herbs, soil, leaf litter, woody litter, dead wood, mosses, lichens, and biocrusts, 152 herb %N dfa values, 1,005 measurements of N fixer or N-fixing substrate abundance, and 762 BNF rates per unit of N fixer abundance for a total of 424 species across 66 countries. This dataset facilitates synthesis, meta-analysis, upscaling, and model benchmarking of BNF fluxes at multiple spatial scales.

Reis Ely, Carla R. [Oregon State Univ., Corvallis,↗
DOE OSTI2024

The layered RuBr 3 –RuI 3 honeycomb system

A honeycomb layered Ru(Br 1−x I x ) 3 solid solution is prepared through a high-pressure synthesis method, with anion disorder and strong spin–orbit coupling. Their electronic and magnetic properties vary dramatically with changing chemical composition.

Materials Science↗
DOE OSTI2024

Heterostructural interface engineering for ultrawide-gap nitrides from first principles: Ta C / Al N and Ta C / Ga N rocksalt-wurtzite interfaces

Epitaxial lattice matching is an important condition for the formation of coherent interfaces with low defect densities. However, lattice-matched substrates with the same crystal structure as the active layer are often not available, suggesting opportunities for utilizing heterostructural interfaces. For example, at high Al contents that are interesting for ultrawide-gap applications in power electronics, Al x ⁢Ga 1-x ⁢N semiconductor alloys in the (0001) orientation of the wurtzite (wz) structure become lattice-matched to (111)-oriented rocksalt (rs) Ta⁢C substrates. To predict the expected interface atomic structures under different synthesis conditions, we perform high-throughput density-functional-theory calculations, using an algorithm for systematic sampling of the possible stacking sequences of the atomic layers on the in-plane hexagonal lattice. The approach considers octahedral, tetrahedral, and prismatic coordination motifs, and is generally applicable for the modeling of commensurate rs/wz heterostructural interfaces. Our results provide guidance for synthesis control of substrate-film bonding and the polarity of ultrawide-gap Al x⁢ Ga 1-x⁢ N alloys on Ta⁢C substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Precursor selection in hybrid molecular beam epitaxy of alkaline-earth stannates

One of the challenges of oxide molecular beam epitaxy (MBE) is the synthesis of oxides containing metals with high electronegativity (metals that are hard to oxidize). The use of reactive organometallic precursors can potentially address this issue. To investigate the formation of radicals in MBE, we explored three carefully chosen metal-organic precursors of tin for SnO 2 and BaSnO 3 growth: tetramethyltin (TMT), tetraethyltin (TET), and hexamethylditin (HMDT). All three precursors produced single-crystalline, atomically smooth, and epitaxial SnO 2 (101) films on r-Al 2 O 3 (101¯2) in the presence of oxygen plasma. The study of growth kinetics revealed reaction-limited and flux-limited regimes except for TET, which also exhibited a decrease in the deposition rate with increasing temperature above ~800 °C. Contrary to these similarities, the performance of these precursors was dramatically different for BaSnO 3 growth. TMT and TET were ineffective in supplying adequate tin, whereas HMDT yielded phase-pure, stoichiometric BaSnO 3 films. Significantly, HMDT resulted in phase-pure and stoichiometric BaSnO 3 films even without the use of an oxygen plasma (i.e., with molecular oxygen alone). Furthermore, these results are discussed using the ability of HMDT to form tin radicals and therefore assisting with Sn → Sn 4+ oxidation reaction. Structural and electronic transport properties of films grown using HMDT with and without oxygen plasma are compared. This study provides guideline for the choice of precursors that will enable the synthesis of metal oxides containing hard-to-oxidize metals using reactive radicals in MBE.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modulating the optoelectronic properties of hybrid Mo-thiolate thin films

In this study, hybrid MoS 2 -based molybdenum thiolate thin films with selected organic motifs are grown using molecular layer deposition (MLD), allowing for tunable optoelectronic film properties. The thin films are deposited at 170°C using the metal precursor molybdenum hexacarbonyl and one of the three organic precursors: 1,2-ethanedithiol, 1,4-butanedithiol, and 1,4-benzenedithiol. The resulting Mo-ethanethiolate, Mo-butanethiolate, and Mo-benzenethiolate films show saturating growth with a growth per cycle of 1.2, 1.0, and 1.5 Å/cycle, respectively. Fourier transform infrared spectroscopy, x-ray photoelectron spectroscopy, Raman spectroscopy, x-ray absorption spectroscopy, and x-ray diffraction are used to characterize the as-deposited films. Results show that by changing the organic precursor, the film composition as well as the optical and electronic properties can be tuned. The Mo-thiolate films grown with benzenedithiol exhibit the lowest resistivity, which at 12 mΩ cm is ~400 times more conductive than Mo-thiolates grown with aliphatic organic linkers. All three backbone chemistries of the Mo-thiolates show an optical bandgap between 2.3 and 2.4 eV and mild photoconductivity response. The MLD of these Mo-thiolate films demonstrates the synthesis of transition metal-organosulfur thin films with tunable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Sorghum (Sorghum bicolor) Brown Midrib 30 Gene Encodes a Chalcone Isomerase Required for Cell Wall Lignification

In sorghum ( Sorghum bicolor ) and other C 4 grasses, brown midrib ( bmr ) mutants have long been associated with plants impaired in their ability to synthesize lignin. The brown midrib 30 ( Bmr30 ) gene, identified using a bulk segregant analysis and next-generation sequencing, was determined to encode a chalcone isomerase (CHI). Two independent mutations within this gene confirmed that loss of its function was responsible for the brown leaf midrib phenotype and reduced lignin concentration. Loss of the Bmr30 gene function, as shown by histochemical staining of leaf midrib and stalk sections, resulted in altered cell wall composition. In the bmr30 mutants, CHI activity was drastically reduced, and the accumulation of total flavonoids and total anthocyanins was impaired, which is consistent with its function in flavonoid biosynthesis. The level of the flavone lignin monomer tricin was reduced 20-fold in the stem relative to wild type, and to undetectable levels in the leaf tissue of the mutants. The bmr30 mutant, therefore, harbors a mutation in a phenylpropanoid biosynthetic gene that is key to the interconnection between flavonoids and monolignols, both of which are utilized for lignin synthesis in the grasses.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2008

Effects of Global Change on U.S. Urban Areas: Vulnerabilities, Impacts, and Adaptation

This slide presentation reviews some of the effects that global change has on urban areas in the United States and how the growth of urban areas will affect the environment. It presents the elements of our Synthesis and Assessment Report (SAP) report that relate to what vulnerabilities and impacts will occur, what adaptation responses may take place, and what possible effects on settlement patterns and characteristics will potentially arise, on human settlements in the U.S. as a result of climate change and climate variability. We will also present some recommendations about what should be done to further research on how climate change and variability will impact human settlements in the U.S., as well as how to engage government officials, policy and decision makers, and the general public in understanding the implications of climate change and variability on the local and regional levels. Additionally, we wish to explore how technology such as remote sensing data coupled with modeling, can be employed as synthesis tools for deriving insight across a spectrum of impacts (e.g. public health, urban planning for mitigation strategies) on how cities can cope and adapt to climate change and variability. This latter point parallels the concepts and ideas presented in the U.S. National Academy of Sciences, Decadal Survey report on "Earth Science Applications from Space: National Imperatives for the Next Decade and Beyond" wherein the analysis of the impacts of climate change and variability, human health, and land use change are listed as key areas for development of future Earth observing remote sensing systems.

Quattrochi, Dale A.↗
NASA NTRS2013

Pyroshock Testing of the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG)

The Mars Science Laboratory (MSL) Multi-Mission Radioisotope Thermoelectric Generator, or MMRTG, was developed by the Department Of Energy to a set of requirements from multiple NASA mission concepts. Those concepts included deep space missions to the outer planets as well as missions to Mars. The synthesis of that diverse set of requirements addressed functional as well as environmental requirements.

radioisotope↗
DOE OSTI2023

Science-Based Acceleration of the Full Value Stream for Metal Additive Manufacturing: Expedited Powder Development and Additive Manufacturing Deployment in the Areas of Ni-Base Superalloy and Custom Alloy Powders for AM (Final Report)

The overall Science-based Acceleration of the Full Value Stream for Metal Additive Manufacturing (AM): Expedited Powder Development and Additive Manufacturing Deployment (“X-P4AM”) project objective is to drastically reduce the time-to-market barriers for new additive alloys of interest in automotive and aerospace applications, through computational alloy design with rapid screening and down- selection via synthesis of candidate alloys with rapid solidification. The project will also refine the technology in high pressure gas atomization to improve the production of commercial quantities of selected powders with high powder yields and enhanced powder quality. Production of modified nickel-based superalloys and a Ni-containing alloy based on a high entropy composition, enhanced powder production methods, and optimized AM build parameterization provided critical steps in widespread adoption of AM technology for aerospace applications, in this case. The individual backgrounds and capabilities of the Parties are ideally suited to the successful execution of this work. The included work enhanced the Contractors’ AM capabilities, a core competency of the Contractors, and develop a close working relationship with the Participant in the area of nickel-based powder superalloys and custom alloys and their end use.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Science-Based Acceleration of the Full Value Stream for Metal Additive Manufacturing: Expedited Powder Development and Additive Manufacturing Deployment in the Areas of Ni-Base Superalloy and Custom Alloy Powders for AM

The overall Science-based Acceleration of the Full Value Stream for Metal Additive Manufacturing (AM): Expedited Powder Development and Additive Manufacturing Deployment (“X-P4AM”) project objective is to drastically reduce the time-to-market barriers for new additive alloys of interest in automotive and aerospace applications, through computational alloy design with rapid screening and down- selection via synthesis of candidate alloys with rapid solidification. The project will also refine the technology in high pressure gas atomization to improve the production of commercial quantities of selected powders with high powder yields and enhanced powder quality. Production of modified nickel-based superalloys and a Ni-containing alloy based on a high entropy composition, enhanced powder production methods, and optimized AM build parameterization provided critical steps in widespread adoption of AM technology for aerospace applications, in this case. The individual backgrounds and capabilities of the Parties are ideally suited to the successful execution of this work. The included work enhanced the Contractors’ AM capabilities, a core competency of the Contractors, and develop a close working relationship with the Participant in the areas of nickel-based powder superalloys and custom alloys and their end use.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Science-Based Acceleration of the Full Value Stream for Metal Additive Manufacturing: Expedited Powder Development and Additive Manufacturing Deployment in the Areas of Ni-Base Superalloy and Custom Alloy Powders for AM

The overall Science-based Acceleration of the Full Value Stream for Metal Additive Manufacturing (AM): Expedited Powder Development and Additive Manufacturing Deployment (“X-P4AM”) project objective is to drastically reduce the time-to-market barriers for new additive alloys of interest in automotive and aerospace applications, through computational alloy design with rapid screening and down- selection via synthesis of candidate alloys with rapid solidification. The project will also refine the technology in high pressure gas atomization to improve the production of commercial quantities of selected powders with high powder yields and enhanced powder quality. Production of modified nickel-based superalloys and a Ni-containing alloy based on a high entropy composition, enhanced powder production methods, and optimized AM build parameterization provided critical steps in widespread adoption of AM technology for aerospace applications, in this case. The individual backgrounds and capabilities of the Parties are ideally suited to the successful execution of this work. The included work enhanced the Contractors’ AM capabilities, a core competency of the Contractors, and develop a close working relationship with the Participant in the areas of nickel-based powder superalloys and custom alloys and their end use.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Synthesis Study of a 6-Element Non-Uniform Array with Tilted Elements for CLARREO Project

This paper presents the results of a preliminary study of the gain/pattern properties of a 6-element Radio Occultation (RO) array for the proposed CLARREO (Climate Absolute Radiance and Refractivity Observatory (CLARREO) Project. CLARREO is one of the 4 highest priority missions recommended in the National Research Council Earth Science Decadal Survey.

spatial arrays↗