Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface waters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Platinum–Ruthenium Alloys Are Not Bifunctional CO Electro-Oxidation Catalysts: A Kinetic Analysis

Electro-oxidation of CO is a common kinetic bottleneck in many types of fuel cells and organic electrosynthesis processes. Alloys of Pt and Ru are often used as anode catalysts, with high activity attributed to bifunctionality; this suggests that Ru preferentially activates water to form surface hydroxyl groups that can react with Pt-bound CO. However, rigorous kinetic measurements have not confirmed this assertion under steady-state electro-oxidation conditions. Here, CO electro-oxidation is analyzed using several commercial Pt/C and Pt 100-x Ru x /C nanoparticle catalysts in acidic and alkaline electrolytes. Kinetic observables including apparent transfer coefficients and reaction orders are measured and evaluated using a degree of rate control analysis. The kinetic observables for both Pt and PtRu alloys are most consistent with competitive adsorption and Langmuir–Hinshelwood coupling across a single site-type, rather than two distinct sites. Furthermore, the role of Ru in CO electro-oxidation is assigned to be a purely electronic effect.

Alcohols↗
DOE OSTI2020

Quantifying Fluid-Wettable Effective Pore Space in the Utica and Bakken Oil Shale Formations

Combined (ultra-) small angle neutron scattering measurements [(U)SANS] and a contrast matching technique were employed to quantify the porosity and pore size distribution from 1 nm to 10 μm and to differentiate accessible (open) pores and inaccessible (closed) pores with respect to organophilic and hydrophilic fluids for two Utica and two Bakken shale samples. Overall, the results indicate that around 40–70% of the pores in the Utica oil shales (mixed carbonate mudstone) are accessible to oil, and 34–37% of the pore surfaces are water-wet. In contrast, the Bakken oil shales (mixed siliceous mudstone and carbonate/siliceous mudstone), which have high total organic carbon contents, have a higher proportion of isolated pore space that is not preferentially wet by oil or water, with less than 36% of the pores accessible to both fluids. In addition, for both formations, pores less than 3 nm in diameter are not oil accessible (organic matter related) but water accessible (clay tactoids related).

58 GEOSCIENCES↗
DOE OSTI2022

More Realistic Intermediate Depth Dry Firn Densification in the Energy Exascale Earth System Model (E3SM)

Abstract Earth system models account for seasonal snow cover, but many do not accommodate the deeper snowpack on ice sheets (aka firn) that slowly transforms to ice under accumulating snowfall. To accommodate and resolve firn depths of up to 60 m in the Energy Exascale Earth System Model's land surface model (ELM), we add 11 layers to its snowpack and evaluate three dry snow compaction equations in multi‐century simulations. After comparing results from ELM simulations (forced with atmospheric reanalysis) with empirical data, we find that implementing into ELM a two‐stage firn densification model produces more accurate dry firn densities at intermediate depths of 20–60 m. Compared to modeling firn using the equations in the (12 layer) Community Land Model (version 5), switching to the two‐stage firn densification model (with 16 layers) significantly decreases root‐mean‐square errors in upper 60 m dry firn densities by an average of 41 kg m −3 (31%). Simulations with three different firn density parameterizations show that the two‐stage firn densification model should be used for applications that prioritize accurate upper 60 m firn air content (FAC) in regions where the mean annual surface temperature is greater than roughly −31°C. Because snow metamorphism, firn density, and FAC are major components in modeling ice sheet surface albedo, melt water retention, and climatic mass balance, these developments advance broader efforts to simulate the response of land ice to atmospheric forcing in Earth system models.

58 GEOSCIENCES↗
DOE OSTI2025

Shrub Expansion Can Counteract Carbon Losses From Warming Tundra

Arctic warming is causing substantial compositional, structural, and functional changes in tundra vegetation including shrub and tree-line expansion and densification. However, predicting the carbon trajectories of the changing Arctic is challenging due to interacting feedbacks between vegetation composition and structure, and surface characteristics. We conduct a sensitivity analysis of the current-date to 2100 projected surface energy fluxes, soil carbon pools, and CO 2 fluxes to different shrub expansion rates under future emission scenarios (intermediate—RCP4.5, and high—RCP8.5) using the Arctic-focused configuration of E3SM Land Model (ELM). We focus on Trail Valley Creek (TVC), an upland tundra site in the western Canadian Arctic, which is experiencing shrub densification and expansion. We find that shrub expansion did not significantly alter the modeled surface energy and water budgets. However, the carbon balance was sensitive to shrub expansion, which drove higher rates of carbon sequestration as a consequence of higher shrubification rates. Thus, at low shrub expansion rates, the site would become a carbon source, especially under RCP8.5, due to higher temperatures, which deepen the active layer and enhance soil respiration. At higher shrub expansion rates, TVC would become a net CO 2 sink under both Representative Concentration Pathway scenarios due to higher shrub productivity outweighing temperature-driven respiration increase. Our simulations highlight the effect of shrub expansion on Arctic ecosystem carbon fluxes and stocks. We predict that at TVC, shrubification rate would interact with climate change intensity to determine whether the site would become a carbon sink or source under projected future climate.

Yazbeck, Theresia [The Ohio State Univ., Columbus,↗
DOE OSTI2024

Prediction of Distributed River Sediment Respiration Rates Using Community-Generated Data and Machine Learning

River sediment microbial respiration is a key indicator of ecosystem functioning and the biogeochemical fluxes across this critical zone link surface and subsurface waters. As such, there is tremendous interest in measuring and mapping these respiration rates. Respiration observations are expensive and labor intensive; there is limited data available to the community. An open science, collaborative initiative is collecting samples for respiration rate analysis and multi-scale metadata; this evolving data set is being used for making machine learning (ML) predictions at unsampled sites to help inform continued community engagement. However, it is a challenge to find an optimum configuration for ML models to work with this feature-rich (i.e., 100+ possible input variables) data set. Here, we present results from a two-tiered approach to managing the analysis of this complex data set: (a) a stacked ensemble of models that automatically optimizes hyperparameters and manages the training of many models and (b) feature permutation importance to detect the most important features in the models. The major elements of this workflow are modular, portable, open, and cloud-based thus making this implementation a potential template for other applications. The models developed here predict that sediment organic matter chemistry is one of the most important features for predicting sediment respiration rate. Other larger-scale, important features fall into the categories of climatic, ecological, geological, and fluvial settings. Leveraging these larger-scale features to generate data-driven estimates of river sediment respiration rates reveals spatially consistent but heterogeneous patterns across the river network of the Columbia River Basin.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Light rain exacerbates extreme humid heat

Abstract Humid heat waves pose significant risks to human health and the ecosystem. Intuitively, rainfall often alleviates extreme humid heat. However, here we show that light rain often accompanies extreme humid heat, exacerbating its frequency and intensity, especially over arid and semi-arid regions compared to no rain and moderate-to-heavy rain cases. This is because light rain does not dramatically reduce solar radiation but increases near-surface humidity through enhanced surface evaporation. The water replenishment from light rain as well as a shallower planetary boundary layer is crucial for consecutive extremes where there are commonly sporadic drizzle days amidst several rain-free days. These extremes last longer than rain-free extremes. Current global climate models (GCMs) overestimate light rain. After reducing this bias in a GCM, underestimations of humid heat waves in energy-limited regions and overestimations in water-limited regions are largely alleviated. These findings underscore the underappreciated impact of light rain on extreme humid heat.

Science & Technology - Other Topics↗
DOE OSTI2023

Biological carbon pump estimate based on multidecadal hydrographic data

The transfer of photosynthetically produced organic carbon from surface to mesopelagic waters draws carbon dioxide from the atmosphere. However, current observation-based estimates disagree on the strength of this biological carbon pump (BCP). Earth system models (ESMs) also exhibit a large spread of BCP estimates, indicating limited representations of the known carbon export pathways. Here we use several decades of hydrographic observations to produce a top-down estimate of the strength of the BCP with an inverse biogeochemical model that implicitly accounts for all known export pathways. Our estimate of total organic carbon (TOC) export at 73.4 m (model euphotic zone depth) is 15.00 ± 1.12 Pg C year –1 , with only two-thirds reaching 100 m depth owing to rapid remineralization of organic matter in the upper water column. Partitioned by sequestration time below the euphotic zone, τ, the globally integrated organic carbon production rate with τ > 3 months is 11.09 ± 1.02 Pg C year –1 , dropping to 8.25 ± 0.30 Pg C year –1 for τ > 1 year, with 81% contributed by the non-advective-diffusive vertical flux owing to sinking particles and vertically migrating zooplankton. Nevertheless, export of organic carbon by mixing and other fluid transport of dissolved matter and suspended particles remains regionally important for meeting the respiratory carbon demand. Here, the temperature dependence of the sequestration efficiency inferred from our inversion suggests that future global warming may intensify the recycling of organic matter in the upper ocean, potentially weakening the BCP.

58 GEOSCIENCES↗
DOE OSTI2025

Crossflow membrane filtration system for operando fouling characterization using transmission x-ray scattering

Membrane-based separations are widely used for wastewater treatment due to their low cost and efficiency. However, membrane fouling, which is the unwanted deposition or attachment of contaminants on membrane surfaces and/or within membrane pores, remains a major challenge as it increases the mass transfer resistance and reduces membrane productivity. Membrane fouling is typically probed by macroscopic performance metrics, such as flux decline, and ex situ characterization. However, this does not capture the membrane and fouling layer evolution under operating conditions, potentially masking important mechanisms and nonequilibrium pathways that impact fouling. Here, we present a remotely controlled crossflow membrane system and a custom membrane cell for operando fouling characterization using transmission small/wide angle x-ray scattering (SAXS/WAXS). This approach allows direct observation of the nanoscale changes occurring at the membrane surface during pressurized water treatment processes, enabling a new way to understand the connections between dynamic fouling behaviors and membrane performance. Nanoparticle fouling of porous membranes during ultrafiltration was investigated using operando SAXS, and mineral scaling of reverse osmosis membranes was investigated using operando WAXS. Furthermore, this system allows for tracking membrane fouling in real time and under realistic conditions, providing fundamental physical insights into how water chemistry and operating conditions affect macroscopic membrane performance. Moreover, this system opens the door for future in situ and operando studies, and it serves as a testbed for evaluating novel materials/processes for membrane-based separations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anoxic photogeochemical oxidation of manganese carbonate yields manganese oxide

The oxidation states of manganese minerals in the geological record have been interpreted as proxies for the evolution of molecular oxygen in the Archean eon. In this paper we report that an Archean manganese mineral, rhodochrosite (MnCO 3 ), can be photochemically oxidized by light under anoxic, abiotic conditions. Rhodochrosite has a calculated bandgap of about 5.4 eV, corresponding to light energy centering around 230 nm. Light at that wavelength would have been present on Earth’s surface in the Archean, prior to the formation of stratospheric ozone. We show experimentally that the photooxidation of rhodochrosite in suspension with light centered at 230 nm produced H 2 gas and manganite (γ-MnOOH) with an apparent quantum yield of 1.37 × 10 –3 moles hydrogen per moles incident photons. Our results suggest that manganese oxides could have formed abiotically on the surface in shallow waters and on continents during the Archean eon in the absence of molecular oxygen.

58 GEOSCIENCES↗
DOE OSTI2021

Reactive binder and aggregate interfacial zones in the mortar of Tomb of Caecilia Metella concrete, 1C BCE, Rome

Integrated spectroscopic analyses and synchrotron X-ray microdiffraction investigations provide insights into the long-term reactivity of volcanic aggregate components and calcium-aluminum-silicate-hydrate (C-A-S-H) binder in mortar samples from the robust concrete of the sepulchral corridor of the Tomb of Caecilia Metella, 1st C BCE, Rome. The results of innovative micrometer-scale analytical maps indicate that Pozzolane Rosse tephra components–scoria groundmass, clinopyroxene, and leucite crystals–contributed to pozzolanic production of C-A-S-H binder and then remained reactive long after hydrated lime (Ca(OH) 2 ) was fully consumed. The C-A-S-H binding phase is reorganized into wispy halos and tendril-like strands, some with nanocrystalline preferred orientation or, alternatively, split into elongate features with short silicate chain lengths. These microstructures apparently record chemical and structural destabilization of C-A-S-H during excessive incorporation of Al 3+ and K + released through leucite dissolution. Resistance to failure may result from the intermittent toughening of interfacial zones of scoriae and clinopyroxene crystals with post-pozzolanic strätlingite and Al-tobermorite mineral cements and from long-term remodeling of the pozzolanic C-A-S-H binding phase. Roman builders’ selection of a leucite-rich facies of Pozzolane Rosse tephra as aggregate and construction of the tomb in an environment with high surface and ground water exposure apparently increased beneficial hydrologic activity and reactivity in the concrete.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Correction and calibration of atmospheric impact observations in GOES GLM data

The Earth's atmosphere is impacted daily by both meteoroids and artificial objects. Calibrated observations of the emitted light at sufficiently high sampling rates can enable or improve the estimation of impactor attributes such as size, cohesion, trajectory, and composition, but are difficult to obtain owing to the unpredictability, brevity, and high dynamic (brightness) range of impacts. Ground-based camera systems have successfully monitored small regions of the atmosphere at video frame rates and with limited radiometric capabilities, but most impacts occur over the 70% of the Earth's surface covered by water and are therefore missed by these networks. The Geostationary Lightning Mapper (GLM) instruments aboard Geostationary Operational Environmental Satellites 16 and 17 provide near-hemispherical coverage at 500 frames per second. These data have been shown to contain the signatures of many independently confirmed impacts, often from both viewing angles simultaneously, and constitute an observational resource that is currently unparalleled in the public domain. NASA's Asteroid Threat Assessment Project has implemented an automated impact detection pipeline that processes data from GLM daily. Given a detected impact, the GLM data contain a wealth of information for use in quantitative follow-up analyses. However, impact events differ from lightning in ways that violate key assumptions built into GLM's design. The result is that GLM's onboard processing introduces errors into pixel observations of impact events and the calibrated energies near the periphery of the detector may be substantially overestimated. We present methods for mitigating these and other issues to produce a data product more suitable for impact analyses than the existing GLM lightning product.

58 GEOSCIENCES↗
DOE OSTI2023

An Extratropical Pathway for the Madden–Julian Oscillation’s Influence on North Atlantic Tropical Cyclones

Abstract This study investigates the combined impacts of the Madden–Julian oscillation (MJO) and extratropical anticyclonic Rossby wave breaking (AWB) on subseasonal Atlantic tropical cyclone (TC) activity and their physical connections. Our results show that during MJO phases 2–3 (enhanced Indian Ocean convection) and 6–7 (enhanced tropical Pacific convection), there are significant changes in basinwide TC activity. The MJO and AWB collaborate to suppress basinwide TC activity during phases 6–7 but not during phases 2–3. During phases 6–7, when AWB occurs, various TC metrics including hurricanes, accumulated cyclone energy, and rapid intensification probability decrease by ∼50%–80%. Simultaneously, large-scale environmental variables, like vertical wind shear, precipitable water, and sea surface temperatures become extremely unfavorable for TC formation and intensification, compared to periods characterized by suppressed AWB activity during the same MJO phases. Further investigation reveals that AWB events during phases 6–7 occur in concert with the development of a stronger anticyclone in the lower troposphere, which transports more dry, stable extratropical air equatorward, and drives enhanced tropical SST cooling. As a result, individual AWB events in phases 6–7 can disturb the development of surrounding TCs to a greater extent than their phases 2–3 counterparts. The influence of the MJO on AWB over the western subtropical Atlantic can be attributed to the modulation of the convectively forced Rossby wave source over the tropical eastern Pacific. A significant number of Rossby waves initiating from this region during phases 5–6 propagate into the subtropical North Atlantic, preceding the occurrence of AWB events in phases 6–7.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Hanford Site Composite Analysis: Recharge and Inventory Sensitivity Analyses for the A Trenches, BC Cribs and Trenches, and PUREX Area Vadose Zone Models

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Composite Analysis Vadose Zone Transport of Selected Radionuclides Released from DOE O 435.1 Sources.

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The parallel exascale version of the Subsurface Transport Over Multiple Phases (eSTOMP1) simulator is used to simulate flow and transport for the CA VZ models. The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Composite Analysis Vadose Zone Transport of Selected Hanford Site Composite Analysis: Vadose Zone Transport of Selected Radionuclides Released from DOE O 435.1 Waste Sites

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The parallel exascale version of the Subsurface Transport Over Multiple Phases (eSTOMP) simulator is used to simulate flow and transport for the CA VZ models. The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Area V: Waste Management and Subsurface Science (FY21-23 Final Report)

The objective of the Waste Management and Subsurface Science Topic Area V project is to evaluate the feasibility and safety of an intermediate-depth borehole for disposal of Israel Atomic Energy Commission (IAEC) nuclear waste. The IAEC nuclear waste is currently stored in above ground and/or in near-surface facilities that provide short-term radiological worker safety but do not provide long-term, full security and safeguards protection for the nuclear material. Disposal of the IAEC nuclear waste several hundred meters below the surface in a sealed borehole would provide long-term security and safeguards due to its depth underground, as well as long-term radiological safety, due to its isolation in a stable geological formation. This project supports the nuclear security and safeguards initiatives of the Science and Technology Working Group of the NNSA/IAEC Memorandum of Understanding (MOU) and addresses the Topic Area V objective and associated goals. The goals for Topic Area V are: (1) Assess the suitability of the vadose zone in the Yamin Plain of the northern Negev Desert, Israel as a host location for intermediate-depth borehole disposal of radioactive waste, (2) Define and refine the necessary characterization needs to better understand the regional climate, structure, and stratigraphy, geomechanics, geochemistry, hydrogeology, and seismicity of the stratigraphic sequence from the surface to the water table in the vicinity of the proposed host location for the disposal borehole(s), and (3) Develop a preliminary plan and schedule, including necessary resources and costs, for a borehole disposal concept and robust and transparent pre-closure and post-closure safety assessments. The safety assessments will require iteration with process level models at both site and regional scales. Upon completion, the information collected by this effort will allow the IAEC to make decisions regarding the viability and applicability of an intermediate depth (<500m) borehole for disposal in the vadose zone of the Yamin Plain. This FY21-23 final report is provided in lieu of a workshop report that was originally planned for delivery in January, 2024. Due to the conflict in Israel and associated delays, the workshop has been delayed to April 2024. The workshop will be held at LLNL but offsite and will switch to hybrid if travel restrictions remain in place. The associated workshop report will be provided as part of a new FY24-26 LCP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Examining the Impacts of Microphysical-Dynamical Feedbacks on Convective Clouds in Different Aerosol Environments Using Enhanced Observational and Modeling Strategies

This project investigated how microphysical–dynamical feedbacks influence deep convective clouds across a range of aerosol conditions, storm lifecycles, and meteorological regimes, and how these sensitivities depend on the modeling framework used to represent convection and microphysics. Using the Aerosol, Cloud, Precipitation, and Climate (ACPC) Working Group model intercomparison simulations of isolated deep convection in the Houston region, we found a robust warm-phase aerosol response in most cloud-resolving models. Increased aerosol loading tended to suppress warm-rain production, increase cloud water, and reduce surface rainfall and near-surface evaporation. These impacts were typically strongest early in the convective lifecycle, with the largest aerosol-driven differences occurring during the first half of storm evolution. The ice-phase response, on the other hand, varied widely across modeling frameworks, and differed in sign, timing, and vertical structure. Ice microphysical pathways and parameterizations are therefore leading sources of uncertainty in aerosol–deep convection interactions. Theoretical analyses further suggested that aerosol-driven invigoration through cold-phase processes was much weaker than previously hypothesized for cold-based storms, and in warm-based storms could even reduce updraft strength. These results imply that any invigoration signal is more likely linked to warm-phase processes and peaks early in storm development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Harnessing Ocean Thermal Gradients Using Thermoelectric Based Submersibles for Ocean Power Applications

The urgent need for energy solutions in marine environments has accelerated the development of innovative technologies capable of leveraging natural resources for power generation. This study introduces a buoyancy-driven submersible system designed to harness ocean thermal gradients using thermoelectric generators (TEGs) and phase change materials (PCMs). The technology aims to provide autonomous power to offshore aquaculture farms, unmanned underwater vehicles (UUVs), offshore platform illumination, and ocean sensors, significantly reducing dependence on fossil fuels. Ocean thermal gradients, especially prevalent in mid-latitude regions, exhibit temperature differences between surface and deep waters ranging from 7 degrees Celsius to 30 degrees Celsius depending on seasonal variations. The proposed submersible technology utilizes TEGs to convert thermal energy from these gradients into electrical power, generating between 0.2 and 0.5 watts, while PCMs are employed to store and regulate this energy, ensuring a stable and continuous power supply. The buoyancy-driven mechanism of the submersible enhances its capability to navigate through varying depths, optimizing its exposure to different thermal gradients and maximizing energy harvesting. The performance of this submersible system is analyzed through detailed thermodynamic assessments and computational fluid dynamics (CFD) modeling focused on heat transfer. These analyzes consider real-world ocean temperature profiles and seek to refine the interaction between TEGs and PCMs to optimize energy extraction. The evaluation encompasses several key performance metrics, including power output and energy efficiency. Results confirm the potential of this innovative technology to provide a continuous and reliable power source for marine applications. By demonstrating the feasibility of using ocean thermal gradients for energy generation, this study contributes to the broader efforts of innovation in energy technologies for harsh, remote marine environments. The implementation of such promises is significant advancements in the autonomy of marine operations. The ongoing research will further investigate scalability ensuring that the system can be effectively adapted to various marine settings and operational demands.

16 TIDAL AND WAVE POWER↗