Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Analysis of Heating Rates on the Conical Surface of Apollo Command Module Flying AS-202 Flight

The aerodynamic and aerothermal heating at the leeward surfaces of the Apollo capsule flying high angle of attack were found difficult to simulate using conventional tools. Due to the large subsonic region in the proximity of the shoulder of the base shield, correlation-based tools were found to be inadequate. CFD tools are too time consuming for conceptual design purposes, and cannot account for the transient effects of material response such as wall temperature and blowing. An accurate and timely simulation is essential to effectively size the thermal protection system (TPS), to enhance its performance, and to ensure the safety of the crew. Northrop Grumman Corporation applied a modified version of the MASCC/ATAC program, an inviscid flowfield code with boundary layer solver to simulate this scenario. The MASCC/ATAC code is believed to be the only non-CFD code that can rigorously perform the simulations on the windward surface. The predictions on the windward side of the conical surface were found to be in good agreement with flight data over a wide range of environments. The results are presented in the paper.

Wong, Jim L.↗
NASA NTRS2012

Analysis of the Touch-And-Go Surface Sampling Concept for Comet Sample Return Missions

This paper studies the Touch-and-Go (TAG) concept for enabling a spacecraft to take a sample from the surface of a small primitive body, such as an asteroid or comet. The idea behind the TAG concept is to let the spacecraft descend to the surface, make contact with the surface for several seconds, and then ascend to a safe location. Sampling would be accomplished by an end-effector that is active during the few seconds of surface contact. The TAG event is one of the most critical events in a primitive body sample-return mission. The purpose of this study is to evaluate the dynamic behavior of a representative spacecraft during the TAG event, i.e., immediately prior, during, and after surface contact of the sampler. The study evaluates the sample-collection performance of the proposed sampling end-effector, in this case a brushwheel sampler, while acquiring material from the surface during the contact. A main result of the study is a guidance and control (G&C) validation of the overall TAG concept, in addition to specific contributions to demonstrating the effectiveness of using nonlinear clutch mechanisms in the sampling arm joints, and increasing the length of the sampling arms to improve robustness.

Touch-and-Go (TAG)↗
NASA NTRS2019

Cost Breakeven Analysis of Lunar ISRU for Human Lunar Surface Architectures

The return of humans to the lunar surface encompasses a range of possible architectures from brief Apollo-like sorties to long-term sustainment of human presence. Any architecture in this span requires propellant for the crew’s ascent from the lunar surface, as well as consumables to support their presence on the Moon. Oxygen and hydrogen are candidates for the propellant for the ascent vehicle due to their high specific impulse and potential for production from lunar resources and also constitute important consumables for the crew. Thus, the production of oxygen and/or hydrogen from lunar resources could significantly reduce the mass that must be sent from Earth to enable future human lunar missions. To assess the merits of using lunar resources, the costs associated with developing, producing, launching, operating, and maintaining those systems must be considered relative to the costs of delivering the needed resources from Earth. The demand for those resources depends upon the nature of the lunar mission, while the costs of both Earth-derived and lunar-derived resources depend on the performance requirements and technology capabilities associated with each approach. Thus, determining which approach is more cost efficient requires modeling the performance and cost of the associated systems as well as the range of possible architectures over which such a determination might apply. This research proposes a model that parametrically captures the factors influencing the relevant costs of providing propellant and crew consumables on the lunar surface from Earth and from the Moon. Two ISRU system models are assessed relative to propellant delivery from Earth. In this model, lunar ISRU breaks even with propellant delivery from Earth at high propellant demands and mission durations with multi-year ISRU system lifetimes; however, the costs of developing the necessary technologies to support a highly reliable and autonomous lunar ISRU system were not included.

ISRU↗
NASA NTRS1981

An empirical stress-intensity factor equation for the surface crack

This paper presents an empirical stress-intensity factor equation for a surface crack as a function of parametric angle, crack depth, crack length, plate thickness and plate width for tension and bending loads. The stress-intensity factors used to develop the equation were obtained from a previous three-dimensional, finite-element analysis of semielliptical surface cracks in finite elastic plates subjected to tension or bending loads. A wide range of configuration parameters was included in the equation. The ratios of crack length to plate thickness and the ratios of crack depth to crack length ranged from 0 to 1.0. The effects of plate width on stress-intensity variations along the crack front were also included. The equation was used to predict patterns of surface-crack growth under tension or bending fatigue loads. The equation was also used to correlate surface-crack fracture data for a brittle epoxy material within + or - 10 percent for a wide range of crack shapes and crack sizes.

Newman, J. C., Jr.↗
NASA NTRS1984

Transonic analysis of canted winglets

A computational method developed to provide a transonic analysis for upper/lower surface wing-tip mounted winglets is described. Winglets with arbitrary planform, cant and toe angle, and airfoil section can be modeled. The embedded grid approach provides high flow field resolution and the required geometric flexibility. In particular, coupled Cartesian/cylindrical grid systems are used to model the complex geometry presented by canted upper/lower surface winglets. A new rotated difference scheme is introduced in order to maintain the stability of the small-disturbance formulation in the presence of large spanwise velocities. Wing and winglet viscous effects are modeled using a two-dimensional 'strip' boundary layer analysis. Correlations with wind tunnel and flight test data for three transport configurations are included.

Rosen, B. S.↗
NASA NTRSDate not supplied

X-57 Ground Dynamics Modeling and Analysis

This paper presents simulation work to assess the ground handling behavior of the X-57 airplane, prior to its first flight under electric propulsion. A tire deformation model was fit to manufacturer ground testing data to develop a detailed simulation model of previously unmodeled rolling drag forces on the tires. A special modeling effort corrected for a difference between the runway surface in the manufacturer data (grass) and in intended X-57 surface operations (asphalt/concrete). Analysis based on variation in the test conditions of the manufacturer test data showed that uncertainty in the new estimated rolling drag model should lead to no more than 1.5-percent uncertainty in the takeoff acceleration. Another batch simulation series swept across ground operating conditions and airplane configurations, characterizing turning radii and roll angles experienced for different open-loop steering commands in these various situations. This simulation allowed the identification of ground handling characteristics even beyond the regime of normal operations. As part of this task, a new, modified variant of the Fibonacci search algorithm identified the correct steering inputs for maintaining a straight path as a function of the operating condition. Finally, this paper describes a fixed-base piloted simulator assessment. This assessment supplements the previous simulated ground dynamics data with pilot-in-the-loop data and pilot feedback and confirms the overall acceptability of the ground handling qualities of the X-57 airplane prior to first flight.

Loren J. Newton↗
NASA NTRS1987

Surface catalytic degradation study of two linear perfluoropolyalkylethers at 345 C

Thin-liquid-film degradation studies of two commercially available perfluoropolyalkylether fluids (PFAE) were performed at 345 C, in nitrogen and air atmospheres, on iron and 440 C stainless steel surfaces. It was found that one fluid degraded on both iron and 440 C stainless steel surfaces in an air atmosphere, whereas the other fluid did not degrade. Chemical analysis revealed that the test fluid degraded to lower molecular weight products and that the degradation was accompanied by the formation of a brownish deposit on both the iron and 440 C stainless steel surfaces. Surface analysis of the deposit revealed a susbstantial amount of iron oxide (Fe2O3). It was hypothesized that the fluid which degraded did so because of its acetal structure. The other fluid, lacking the acetal structure, did not degrade.

Morales, Wilfredo↗
NASA NTRS1992

A Remote Laser Mass Spectrometer for Lunar Resource Assessment

The use of lasers as a source of excitation for surface mass spectroscopy has been investigated for some time. Since the laser can be focused to a small spot with intensity, it can vaporize and accelerate atoms of material. Using this phenomenon with a time-of-flight mass spectrometer allows a surface elemental mass analysis of a small region with each laser pulse. While the technique has been well developed for Earth applications, space applications are less developed. NASA Langley recently began a research program to investigate the use of a laser to create ions from the lunar surface and to analyze the ions at an orbiting spacecraft. A multijoule, Q-switched Nd:YAG laser would be focused to a small spot on the lunar surface, creating a dense plasma. This plasma would eject high-energy ions, as well as neutrals, electrons, and photons. An experiment is being set up to determine the characteristics of such a laser mass spectrometer at long flight distances. This experiment will determine the character of a future flight instrument for lunar resource assessment.

Deyoung, R. J.↗
NASA NTRS1986

Design of fuselage shapes for natural laminar flow

Recent technological advances in airplane construction techniques and materials allow for the production of aerodynamic surfaces without significant waviness and roughness, permitting long runs of natural laminar flow (NLF). The present research effort seeks to refine and validate computational design tools for use in the design of axisymmetric and nonaxisymmetric natural-laminar-flow bodies. The principal task of the investigation involves fuselage body shaping using a computational design procedure. Analytical methods were refined and exploratory calculations conducted to predict laminar boundary-layer on selected body shapes. Using a low-order surface-singularity aerodynamic analysis program, pressure distribution, boundary-layer development, transition location and drag coefficient have been obtained for a number of body shapes including a representative business-aircraft fuselage. Extensive runs of laminar flow were predicted in regions of favorable pressure gradient on smooth body surfaces. A computational design procedure was developed to obtain a body shape with minimum drag having large extent of NLF.

Dodbele, S. S.↗
NASA NTRS2013

Regional Climate and Variability of the Summertime Continental United States in Reanalyses

Understanding climate variability at regional scales is an important for research and societal needs. Atmospheric retrospective-analyses (or reanalyses) integrate multitudes of observing systems with numerical models to produce continuous data that include variables not easily observed, if at all. The breadth of variables as well as observational influence included in reanalyses make them ideal for investigating climate variability. In this paper, we assess NASA s Modern Era Retrospective-analysis for Research and Application (MERRA) regional variability in North America, specifically the United States, in conjunction with current satellite data reanalyses. Emphasis is placed on summertime precipitation because 1) it is a difficult parameter to capture in the most difficult season, 2) significant observational resources exist to benchmark comparisons, and 3) accurate assessment of precipitation variability is crucial to a multitude of sectors and applications. Likewise, we have also begun to evaluate surface air temperature. While precipitation biases are identified, year to year variability of the precipitation variations, in many cases, are quite reasonable. However, some spurious long term trends and sudden shifts in the time series are also identified. In surface air temperature, analysis of station observations provides ERA Interim a clear overall advantage. However, in a number of regions, all the reanalyses are quite comparable in variability and trend. In other regions, significant precipitation biases may occur, which has implications for the ancillary process data in a reanalysis, such as surface fluxes. We also characterize the reanalyses ability to capture variability related to ENSO. In general, the summertime variations of precipitation in the reanalyses are more highly correlated (positively) to ENSO (using ENSO34) than are the observations. The Northwestern US shows the largest positive correlations to ENSO34, and reanalyses agree with that, and correlate highly with the gauge observations there. Additional evaluation of the data assimilation using the MERRA Gridded Innovations and Observations (GIO) data, which consists of the assimilated observations as well as forecast an analysis error fields. This work represents an initial evaluation of using the MERRA reanalysis to study regional climate variations of the United States, and identifying its applied limitations

Bosilovich, M G.↗
NASA NTRS2004

Analytical Instrument for Determining the Composition of Surface Materials and Ices in the Solar System: Mini-CIDEX to TIDE

Exobiology experiments onboard spacecraft or space probes often require the detection and identification of a wide range of chemical species over vast concentration ranges. These experiments must be carried out under severely limited conditions utilizing minimal resources. The mini-Cometary Ice and Dust Experiment (mini-CIDEX) instrument was developed for the chemical analysis of a cometary environment. It combined a Gas Chromatograph (GC) with a helium-based Ion Mobility Spectrometer (IMS) to fulfill the analytical requirements of a cometary exobiology mission: universal response; ppb sensitivity; low mass, volume, and consumables. Mini-CIDEX has evolved into the Titan Ice and Dust Experiment (TIDE) for the chemical analysis of the surface (liquid and solid) and lower atmosphere of Titan. The complexity of the analyses will be similar to the comet application with a heavier emphasis on organic molecules. TIDE is a component of the Titan Orbiter Aero-Rover Mission (TOAM) proposed to NASA's New Visions Program. Advances to the Mini-CIDEX technology for the Titan application and the analytical capabilities of TIDE will be presented.

Kojiro, Daniel R.↗