Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sunlight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Photoelectric characteristics of silicon carbide–silicon structures grown by the atomic substitution method in a silicon crystal lattice

Data obtained in an experimental study of the photoelectric characteristics of silicon–silicon carbide structures grown by the atomic substitution method on silicon (100) and (111) substrates are presented. It is found that the maximum sunlight conversion efficiency of a silicon–silicon carbide (silicon carbide–silicon) heterojunction is 5.4%. The theory of dilatation dipole formation upon synthesis by the atomic substitution method is used to account for the mechanism of electrical barrier formation at the silicon–silicon carbide interface.

36 MATERIALS SCIENCE↗

Multiscale cyclic dynamics in light harvesting complex in presence of vibrations and noise

Starting from the many-body Schrödinger equation, in this work we derive a new type of Lindblad master equations describing a cyclic exciton/electron dynamics in the light harvesting complex and the reaction center. These equations resemble the master equations for the electric current in mesoscopic systems, and they go beyond the single-exciton description by accounting for the multi-exciton states accumulated in the antenna, as well as the charge-separation, fluorescence and photo-absorption. Although these effects take place on very different timescales, their inclusion is necessary for a consistent description of the exciton dynamics. Our approach reproduces both coherent and incoherent dynamics of exciton motion along the antenna in the presence of vibrational modes and noise. We applied our results to evaluate energy (exciton) and fluorescent currents as functions of sunlight intensity.

59 BASIC BIOLOGICAL SCIENCES↗

Structural Diversity in Eukaryotic Photosynthetic Light Harvesting

Photosynthesis has been using energy from sunlight to assimilate atmospheric CO 2 for at least 3.5 billion years. Through evolution and natural selection, photosynthetic organisms have flourished in almost all aquatic and terrestrial environments. This is partly due to the diversity of light-harvesting complex (LHC) proteins, which facilitate photosystem assembly, efficient excitation energy transfer, and photoprotection. Structural advances have provided angstrom-level structures of many of these proteins and have expanded our understanding of the pigments, lipids, and residues that drive LHC function. In this review, we compare and contrast recently observed cryo-electron microscopy structures across photosynthetic eukaryotes to identify structural motifs that underlie various light-harvesting strategies. We discuss subtle monomer changes that result in macroscale reorganization of LHC oligomers. Additionally, we find recurring patterns across diverse LHCs that may serve as evolutionary stepping stones for functional diversification. Advancing our understanding of LHC protein–environment interactions will improve our capacity to engineer more productive crops.

60 APPLIED LIFE SCIENCES↗

The Engineering of Climate Engineering

While reducing anthropogenic greenhouse gas emissions remains the most essential element of any strategy to manage climate change risk, it is also in principle possible to directly cool the climate by reflecting some sunlight back to space. Possible such \climate engineering" approaches include adding aerosols to the stratosphere or marine cloud brightening. Assessing whether these ideas could reduce risk requires a broad multidisciplinary research eort spanning climate science, social sciences, and governance. However, if such strategies were ever used, the effort would also constitute one of the most critical engineering design and control challenges ever considered: making real-time decisions for a highly uncertain and nonlinear dynamic system with many input variables, many measurements, and vastly more internal degrees of freedom whose dynamics span a wide range of timescales. We provide a review of the engineering and design aspects of climate engineering, discussing both progress to date and remaining challenges that will need to be addressed.

climate engineering, climate modeling, geoengineer↗

New Materials for Photoelectrochemical Energy Conversion

This review concerns light-to-chemical energy conversion, focusing on approaches that could be driven by terrestrial sunlight to produce hydrogen and/or reduce carbon dioxide. Recent advances in photocatalytic (PC) and photoelectrocatalytic (PEC) materials are covered. In both approaches, the electron-hole pairs that are created by photon absorption must travel in specific directions to the sites that mediate multielectron bond making/breaking redox reactions. Thermodynamic requirements for materials stability are described, although some recently discovered materials appear to be exceptions. For PC materials, the importance of rate matching between reduction and oxidation processes and the mass transfer of intermediates and products is emphasized. Surprisingly, metal sulfides appear to be promising for PC carbon dioxide reduction. For PEC materials, recent work elucidating the elementary step mechanism for oxygen evolution on metal oxides and the discovery of chalcogen-based photocathode materials capable of sustained light-driven CO 2 reduction are discussed.

energy conversion↗

Solar-Driven Reduction of 1 atm CO 2 to Formate at 10% Energy-Conversion Efficiency by Use of a TiO 2 -Protected III-V Tandem Photoanode in Conjunction with a Bipolar Membrane and a Pd/C Cathode Electrocatalyst

A solar-driven CO 2 -reduction (CO 2 R) cell, made up of a tandem GaAs/InGaP/TiO 2 /Ni photoanode in 1.0 M KOH(aq) (pH=13.7) to facilitate the oxygen-evolution reaction (OER), a Pd/C nanoparticle-coated Ti mesh cathode in 2.8 M KHCO 3 (aq) (pH=8.0) to perform the CO 2 R reaction, and a bipolar membrane to allow for steady-state operation of the catholyte and anolyte at different bulk pH values, was built. At the operational current density of 8.5 mA cm -2 , in 2.8 M KHCO 3 (aq), the cathode exhibited <100 mV overpotential and >94% Faradaic efficiency for the reduction of 1 atm of CO 2 (g) to formate. The anode exhibited 320 ± 7 mV overpotential for the OER in 1.0 M KOH(aq), and the bipolar membrane exhibited ~480 mV voltage loss with minimal product crossover as well as >90% and >95% selectivity for protons and hydroxide ions, respectively. The solar-driven CO 2 R cell converted sunlight to fuels at an energy-conversion efficiency of ~10%.

30 DIRECT ENERGY CONVERSION↗

Editorial: Photovoltaic Materials and Devices

As the global energy needs grow, there is increasing interest in the generation of electricity by photovoltaics (PVs) devices or solar cells - devices that convert sunlight to electricity. Solar industry has seen an enormous growth during the last decade. The sale of PV modules has exceeded 27 GW in 2011, with significant contributions to the market share from all technologies. While the silicon technology continues to have the dominant share, the other thin film technologies (CdTe, CIGS, a-Si, and organic PV) are experiencing fast growth. Increased production of silicon modules has led to a very rapid reduction in their price and remains as benchmark for other technologies. The PV industry is in full gear to commercialize new automated equipment for solar cell and module production, instrumentation for process monitoring technologies, and for implementation of other cost-reduction approaches, and extensive research continues to be carried out in many laboratories to improve the efficiency of solar cells and modules without increasing the production costs. A large variety of solar cells, which differ in the material systems used, design, PV structure, and even the principle of PV conversion, are designed to date. This special issue contains peer-reviewed papers in the recent developments in research related to broad spectrum of photovoltaic materials and devices. It contains papers on many aspects of solar cells-the growth and deposition, characterization, and new material development.

14 SOLAR ENERGY↗

Gene Expression in Dunaliella tertiolecta +/- Iron

Dunaliella tertiolecta is an extremophilic, green alga from the Chlorophyte lineage. It is found in coastal marine environments around the world. D. tertiolecta can tolerate extremes of heat, light, pH, and salinity. D. tertiolecta is under development for the production biofuels and other bioproducts because it can produce large quantities of neutral lipids, and it can be grown in open raceway ponds using only the inputs of seawater and sunlight. This isolate of D. tertiolecta (UTEX LB 999) was found in Oslofjord, Norway in 1938. This accession includes an RNA-Seq analysis of D. tertiolecta cultures grown in iron-replete (1.5 µM) or iron-deficient (0 µM) media.

54 ENVIRONMENTAL SCIENCES↗

SIDSIM (Sub-Interval Distribution-function in Simulation) [SWR-17-22]

Time-series simulation is a technique used to estimate the energy delivery of a power generation system with output that changes under changing conditions. Such variable resources include photovoltaic energy systems that experience different levels of sunlight or wind farms with changing wind patterns. As distributed generation from these variable resources continues to flourish, having improved software tools to accurately measure, model, and estimate phenomena of interest to grid integration, in addition to energy output, will be crucial for safeguarding smooth integration and operation of these energy systems. Currently, time-series simulations assume conditions and power output are constant over the duration of a time-step (steady-state assumption). NREL researchers improve the accuracy with a new simulation software called SIDSIM (Sub-Interval Distribution Simulation) that replaces this steady value (solar or wind resource) with a distribution function that has a maximum value, a minimum value, and a shape to the curve within each time-step. The distribution function used for modeling varying values in the SIDSIM software is a novel equation and presents advantageous new benefits over the conventional methods. The first advantage comes in the ability to determine maximum instantaneous power within a time-step. This enables better protection of a system from overcurrent issues and it also allows for better forecasting and reservation of transmission capacity; such capabilities are essential for energy system integration. Second, a distribution function helps to determine the amount of energy loss due to “clipping” in cases where the photovoltaic direct current (DC) system capacity exceeds the inverter capacity, the AC interconnect capacity, or any other limiting component or threshold value. It improves estimates of battery throughput by allowing both charge and discharge of a battery within the duration of a time-step. Third, it provides a more refined estimate of utility-bill impacts by considering the delivered power may be higher than the site load or lower than the regular average power estimates that are made using a quasi-steady-state assumption. SEE ALSO OSTI ID 1,361,018

Walker, Andy↗

OpenCSP v.1.0

SAND2024-08987O OpenCSP analyzes and improves the performance of optical mirrors that reflect sunlight and concentrate it onto a receiver. The algorithms in this library analyze the flow of light from an original source—such as the sun—reflecting off one or more mirrors, and onto a receiver, optical screen, or camera. OpenCSP also analyzes optical systems using other techniques, such as shape or slope comparison. The software calculates aggregate properties of the optical system, such as its efficiency, manufacturing error, pointing control error, expected performance, and other useful parameters. OpenCSP also includes high-level tools, such as Open SOFAST, a program that obtains high-resolution measurement of CSP mirrors, full heliostats, and other CSP collectors. OpenCSP supports producing meaningful output data to help CSP designers and field operators improve the performance of their systems. OpenCSP also includes classes and functions that support these calculations, including input utilities, analysis output libraries, geometric constraint analysis for drone flight planning, and more. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Brost, Randolph↗

OPET Hardware (Open PV Electrical Tool Hardware) [SWR-25-42]

OPET (Open-source Photovoltaic Electrical Tool) is used for performance measurements of solar photovoltaic (PV) devices in the field under natural sunlight or in the lab under artificial light. Its primary use is in research and development of solar cells and modules, specifically in reliability and durability research of PV devices. Some features and functions include: -IV curve measurements with linear or cosine distributed measurement points -PV device active loading at open circuit voltage (Voc), short circuit current (Isc) and maximum power point (Pmp) -Bias power supply to overcome series resistance in contact wires for Isc measurements and loading -PV voltage input in five ranges from 1V to 100V -PV current input ranges -Low current version, six current ranges from 1.1mA to 340mA -High current version, six current ranges from 50mA to 15A -IO ports for I2C and SPI temperature sensor Arduino extension boards -Integrated fan control This repository contains everything relating to the hardware of the OPET device. If you are looking for the firmware or software repositories, links are below: https://github.com/NREL/opet-firmware https://github.com/NREL/opet-control

McDanold, Byron [National Renewable Energy Laborat↗

Experimental study of UV induced tensile properties deterioration and chemical aging of polyurea–POSS composites

Ultraviolet (UV) radiation present in natural sunlight degrades the chemical and mechanical properties of polymeric matrices in composites. Polyurea possess a unique set of chemical and mechanical properties due to its complex microstructure comprising of hard and soft segments (phases). The primary objective of the work presented here is to characterize the chemical and mechanical degradation of pure polyurea and polyurea - polyhedral oligomeric silsesquioxane (POSS) nanocomposites subjected to UV radiation exposure for 45 days. Control specimen in as-received condition (reference specimen) and UV-aged tensile test specimen are tested in the study. Analysis of Fourier transformed infrared (FTIR) spectra for UV-aged polyurea and polyurea-POSS composites reveals that the addition of POSS nanoparticles accelerate the deterioration of polyurea matrix by breaking the hard phase network and altering the mechanism of degradation for the soft phase present in polyurea microstructure. The deterioration of hard and soft segments cause a significant reduction in tensile properties of polyurea-POSS composites.

Materials Science↗

Metagenomic analysis of basal ice from an Alaskan glacier

Background Glaciers cover ~ 10% of land but are among the least explored environments on Earth. The basal portion of glaciers often harbors unique aquatic microbial ecosystems in the absence of sunlight, and knowledge on the microbial community structures and their metabolic potential is very limited. Here, we provide insights into the microbial lifestyle present at the base of the Matanuska Glacier, Alaska. Results DNA and RNA were extracted from samples of the Matanuska Glacier basal ice. Using Illumina MiSeq and HiSeq sequencing, we investigated the microbial diversity with the metagenomic shotgun reads and 16S ribosomal RNA data. We further assembled 9 partial and draft bacterial genomes from the metagenomic assembly, and identified key metabolic pathways such as sulfur oxidation and nitrification. Collectively, our analyses suggest a prevalence of lithotrophic and heterotrophic metabolisms in the subglacial microbiome. Conclusion Our results present the first metagenomic assembly and bacterial draft genomes for a subglacial environment. These results extend our understanding of the chemical and biological processes in subglacial environments critically influenced by global climate change.

54 ENVIRONMENTAL SCIENCES↗

Connections between Student Explanations and Arguments from Evidence about Plant Growth

We investigate how students connect explanations and arguments from evidence about plant growth and metabolism—two key practices described by the Next Generation Science Standards. This study reports analyses of interviews with 22 middle and high school students postinstruction, focusing on how their sense-making strategies led them to interpret—or misinterpret—scientific explanations and arguments from evidence. The principles of conservation of matter and energy can provide a framework for making sense of phenomena, but our results show that some students reasoned about plant growth as an action enabled by water, air, sunlight, and soil rather than a process of matter and energy transformation. These students reinterpreted the hypotheses and results of standard investigations of plant growth, such as van Helmont's experiment, to match their own understanding of how plants grow. Only the more advanced students consistently interpreted mass changes in plants or soil as evidence of movement of matter. We also observed that a higher degree of scaffolding during some of the interview questions allowed mid-level students to improve their responses. We describe our progress and challenges developing teaching materials with scaffolding to improve students’ understanding of plant growth and metabolism.

54 ENVIRONMENTAL SCIENCES↗

Terrestrial Subsurface Ecosystem

The Earth’s crust is a solid cool layer that overlays the mantle, with a varying thickness of between 30-50 km on continental plates, and 5-10 km on oceanic plates. Continental crust is composed of a variety of igneous, metamorphic, and sedimentary rocks that weather and re-form over geologic cycles lasting millions to billions of years. At the crust surface, these weathered minerals and organic material combine to produce a variety of soils types that provide suitable habitats and niches for abundant microbial diversity (see Chapter 4). Beneath this soil zone is the subsurface. Once thought to be relatively free of microorganisms, recent estimates have calculated that between 1016-1017 g C biomass (2-19% of Earth’s total biomass) may be present in this environment (Whitman et al., 1998;McMahon and Parnell, 2014). Microbial life in the subsurface exists across a wide range of habitats: in pores associated with relatively shallow unconsolidated aquifer sediments to fractures in bedrock formations that are more than a kilometer deep, where extreme lithostatic pressures and temperatures are encountered. While these different environments contain varying physical and chemical conditions, the absence of light is a constant. Despite this, diverse physiologies and metabolisms enable microorganisms to harness energy and carbon for growth in water-filled pore spaces and fractures. Carbon and other element cycles are driven by microbial activity, which has implications for both natural processes and human activities in the subsurface, e.g., bacteria play key roles in both hydrocarbon formation and degradation. Hydrocarbons are a major focus for human utilization of the subsurface, via oil and gas extraction and potential geologic CO2 sequestration. The subsurface is also utilized or being considered for sequestered storage of high-level radioactive waste from nuclear power generation and residual waste from past production of weapons grade nuclear materials. While our understanding of the subsurface is continually improving, it is clear that only a small fraction of microbial habitats have been sampled and studied. In this chapter, we will discuss these studies in the context of the distribution of microbial life in the subsurface, the stresses that microorganisms must overcome to survive in these environments, and the metabolic strategies that are employed to harness energy in a region of the planet far-removed from sunlight. Finally, we will consider both beneficial and deleterious effects of microbial activity in the subsurface on human activities in this environment.

Wilkins, Michael J.↗

Estimating the Maximum Achievable Productivity in Outdoor Ponds: Microalgae Biomass Growth Modeling and Climate Simulated Culturing

To address the challenge of determining the maximum achievable monthly, seasonal, and annual biomass productivity for selected promising strains in outdoor ponds at any geographic location of interest, we developed the following four step integrated strategy. First, the strain is characterized in terms of its specific growth rate response to temperature and light, including darkness, as well as its light attenuation characteristics. Second, these species-specific parameters serve as inputs to PNNL’s biomass growth model that, in conjunction with the sunlight and pond water temperature predictions provided by PNNL’s Biomass Assessment Tool, is used to predict the respective biomass productivities for tens of thousands of hypothetical pond locations in the United States. Third, monthly and annual biomass productivity maps are created to identify the geographic location(s) of optimum biomass productivity and to generate light and water temperature “scripts” (time series) for hypothetical ponds at the best site(s). Finally, the maximum achievable biomass productivity for the given strain is confirmed by conducting culture experiments in PNNL’s indoor LED-lighted and temperature-controlled ponds under climate-simulated conditions, using the previously determined light and temperature scripts. This integrated strategy provides an efficient and low risk approach to screen promising strains for their potential to exhibit high biomass productivities, and to validate their model-predicted performance in climate-simulation ponds before transitioning to cultivation in outdoor raceways.

biomass assessment tool↗

High energy yield bifacial spectrum-splitting photovoltaic system

In this paper a photovoltaic system is proposed that achieves high energy yield by integrating bifacial silicon cells into a spectrum-splitting module. Spectrum splitting is accomplished using volume holographic optical elements to spectrally divide sunlight onto an array of photovoltaic cells with different bandgap energies. Light that is reflected from the ground surface onto the rear side of the module is converted by the bifacial silicon cells. The energy yield of the system is optimized by tuning the volume holographic element parameters, such as film thickness, index modulation, and construction point source positions. An example is presented for utility-scale illumination parameters in Tucson, Arizona, that attains an energy yield of 1010 k w ⋅ <#comment/> h r y r ⋅ <#comment/> m 2 , which is 32.8% of the incident solar insolation.

Chrysler, Benjamin D. (ORCID:0000000186250147)↗

Disordered spontaneously buckled optical gratings for improved lighting applications

Technologies for directing daylight deeper within a building space are highly sought after for energy efficiency applications in order to offset artificial lighting costs and to improve workplace productivity via the use of natural light. Vertical window coatings that can perform this task by redistributing sunlight deeper into a space are especially attractive as they are significantly more straightforward to incorporate into a wide variety of architectures as well as to retrofit into existing facades as compared to roof-based skylights or bulky horizontal daylight shelf type options. The potential energy savings are even greater when one takes into account the fact that such technologies would mitigate harsh glare, allowing window shades to be open for longer portions of the day. However, low-cost and readily scalable techniques are essential for widespread adoption of these window coating technologies. Here, we describe a potentially low-cost method to create a window coating that could enhance daylight penetration, requiring only a thin film of polymeric material deposited on an elastomeric substrate. The resulting structure is a disordered, spontaneously buckled optical grating that spreads incident light without noticeable chromatic dispersion due to its stochastic patterning. The described method has the potential to improve energy efficiency and while maintaining acceptable optical clarity.

De Vetter, Brent M.↗