Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Fatigue strength reduction model: RANDOM3 and RANDOM4 user manual, appendix 2

The FORTRAN programs RANDOM3 and RANDOM4 are documented. They are based on fatigue strength reduction, using a probabilistic constitutive model. They predict the random lifetime of an engine component to reach a given fatigue strength. Included in this user manual are details regarding the theoretical backgrounds of RANDOM3 and RANDOM4. Appendix A gives information on the physical quantities, their symbols, FORTRAN names, and both SI and U.S. Customary units. Appendix B and C include photocopies of the actual computer printout corresponding to the sample problems. Appendices D and E detail the IMSL, Version 10(1), subroutines and functions called by RANDOM3 and RANDOM4 and SAS/GRAPH(2) programs that can be used to plot both the probability density functions (p.d.f.) and the cumulative distribution functions (c.d.f.).

Boyce, Lola↗
NASA NTRS1988

The solar origin of long-term variations of the interplanetary magnetic field strength

Using simple models for the coronal field structure, the spacecraft observations of the photospheric field during sunspot cycle 21 were extrapolated for the purpose of modeling quantitatively the long-term behavior of the IMF during the sunspot cycle 21. Results were compared with the measurements of the radial component of the IMF at earth. The results indicate that the solar source of the IMF can be represented to a first approximation by the dipole component of the photospheric field, whose axis is nearly perpendicular to the ecliptic plane around sunspot minimum, but tilts more strongly toward it around sunspot maximum. It was also found that the average radial IMF strength varies with heliographic latitude; around sunspot minimum, the radial IMF is expected to be roughly twice as strong above the sun's poles as near the ecliptic plane. The average strength of the photospheric field above latitude 55 deg is about 10 G around sunspot minimum.

Wang, Y.-M.↗
NASA NTRS1988

Measured line positions and strengths of methane between 5500 and 6180/cm

Calculations for the positions and strengths of over 2000 methane absorption lines stronger than 0.0001/sq cm per atm have been obtained in the 5500-6180/cm spectral region. Spectra were obtained at room temperature using the Fourier transform spectrometer at the Kitt Peak National Observatory solar telescope. The 2nu3 band strength of C-12H4 was shown to be 1.641/sq cm per atm. A Herman-Wallis-type correction of 1 + 0.0298 m + 0.000536 sq m was also found.

Margolis, Jack S.↗
NASA NTRS1988

Analytical and experimental investigation of the notched strength of thick laminates with surface notches

Experimental and analytical investigations of the fracture of a graphite/epoxy laminate with part-through semielliptic surface notches have been conducted. Experimental values of notched strength were determined for a variety of notch aspect ratios and notch depths. Analytical predictions of laminate failure were obtained from three different models. The three models were equally successful in predicting the fracture of laminates with deep notches. The experimental results of laminates with shallow notches indicated more notch sensitivity (that is greater strength reduction) than did the analytical models.

Harris, Charles E.↗
NASA NTRS1988

Fractal distributions of stress and strength and variations of b-value

A two-dimensional planar fault zone on which the difference between stress and strength follows a fractal distribution is simulated to study the variation of the frequency-magnitude b-value under different distributions of heterogeneities and ambient stress levels. It is suggested that earthquakes occur in regions where this difference exceeds a specified value and that the size of these regions is a measure of the magnitude of the associated earthquake. A systematic variation in b-value is observed. It is found that the b-value has a positive correlation with the fractal dimension of the distribution and is inversely related to the ambient stress level. Observational data are compared with the simulation, showing that the observed b-value variation before and during earthquake sequences is a result of changes in both the ambient stress level and in the fractal dimension of the stress-strength distribution.

Huang, J.↗
NASA NTRS1989

Strength of a thick graphite/epoxy rocket motor case after impact by a blunt object

The National Aeronautics and Space Administration is developing graphite/epoxy filament-wound cases (FWC) for the solid rocket motors of the Space Shuttle. The membrane region is about 36 mm thick. A study was made to determine the reduction in strength of the FWC due to accidental damage caused by low-velocity impacts. Two 76.2 cm diameter by 30.5 cm long cylinders were impacted every 5 cm of circumference with 1.27 cm radius impacters of various mass. The impacters represented tools and equipment dropped from various heights. One cylinder was empty and the other was filled with inert propellant. Five cm wide test specimens were cut from the cylinder. Each was centered on an impact site. The specimens were X-rayed and loaded to failure in uniaxial tension. The strengths and depths of impact damage were analyzed in terms of maximum impact force. Rigid body mechanics and the Hertz law were used to derive an equation for impact force in terms of kinetic energy and the masses of the impacter and target. The depth of damage was predicted in terms of impact force using Love's solution of pressure applied on part of the boundary of a semi-infinite body.

Poe, Clarence C., Jr.↗
NASA NTRS1988

Absolute infrared band strength measurement of the ClO radical by Fourier transform infrared spectroscopy

High-resolution (0.005/cm) FTIR spectra of the X2Pi(i)-X2Pi(i) (1-0) rovibrational bands of (C-35)(O-16) and (Cl-37)(O-16) were obtained in 1 torr of helium carrier gas. After measuring the strengths of approximately 830 individual IR lines from several spectra, a total band strength of 13.1 + or - 1.1/sq cm atm and a first Herman-Wallis coefficient of (4.12 + or - 0.62) x 10 to the -3rd were determined.

Lang, Valerie I.↗
NASA NTRS1989

Measurements of oscillator strengths for EUV emissions of ionized oxygen, nitrogen and sulfur

Oscillator-strength determinations for EUV branching emissions of atomic oxygen, nitrogen and sulfur are reported. The transitions studied were excited using a beam-foil source and both branching ratios and radiative lifetimes were determined. Calculated transition-probability data for multiply-ionized neon and oxygen emissions were used to obtain an in situ relative sensitivity curve for the EUV detection system used. New oscillator strengths for NII, OII, SII, and SIII EUV branching emissions that terminate on metastable states of the respective ions are reported, together with new lifetime data for ionized sulfur emissions.

Ryan, L. J.↗
NASA NTRS1990

Instrumented impact and residual tensile strength testing of eight-ply carbon eopoxy specimens

Instrumented drop weight impact testing was utilized to examine a puncture-type impact on thin carbon-epoxy coupons. Four different material systems with various eight-ply lay-up configurations were tested. Specimens were placed over a 10.3-mm diameter hole and impacted with a smaller tup (4.2-mm diameter) than those used in previous studies. Force-time plots as well as data on absorbed energy and residual tensile strength were gathered and examined. It was found that a critical impact energy level existed for each material tested, at which point tensile strength began to rapidly decrease with increasing impact energy.

Nettles, A. T.↗
NASA NTRS1990

Summary of a study to determine low-velocity impact damage and residual tension strength for a thick graphite/epoxy motor case

Impacters of various shapes and masses were dropped from various heights onto 36 mm (1.4 in.) thick graphite/epoxy cylinders, which represented filament wound cases (FWC) for the booster motors of the Space Shuttle. Insert solid propellant was cast into some of the cylinders. The cylinders were impacted numerous times around the circumference and then cut into 51 mm (2.0 in.) wide tension specimens, each containing an impact site. Four indenters were used: a sharp corner, two hemispheres, and a bolt-like rod. The diameters of the hemispheres were 12.7 mm mm (0.5 in.) and 25.4 mm (1.0 in.), and the diameter of the rod was 6.3 mm (0.25 in.). Impacts with the rod were simulated by pressing the rod against the face of specimens. For the hemispheres, the damage initiated beneath the surface at a critical contact pressure and was not visible on the surface until an even larger pressure was exceeded. The damage consisted of matrix cracking and broken fiber. The rod an corner made visible surface damage in all tests. For the hemispheres, the tension strength was reduced considerably before the damage was visible on the surface, 30 percent for the 25.4 mm (1.0 in.) diameter hemisphere and 10 percent for the 12.7 mm (0.5 in.) diameter hemisphere. Analytical methods were used to predict the damage and residual tension strength. A factor of safety to account for nonvisible damage was determined.

Poe, C. C., Jr.↗
NASA NTRS1989

An experimental evaluation of the tensile strength of impact ice

The evaluation of the tensile strength of impact built-up ice on structural components has been prompted by such problems as electrical transmission line losses and catastrophic failures in Arctic regions, deicing problems with fixed-wing and rotary-wing aircraft, etc. It is demonstrated that the conventional tensile-testing technique furnishes adequate data on artificially refrigerated ice, and helps establish the influence of extrinsic factors on ice tensile strength.

Xian, X.↗
NASA NTRS1990

Collision strengths for dipole-allowed transitions in S II

Calculations of collision strengths for electron-impact excitations of S II from the ground state 3p3 4S0 to excited states 3p4 4P, 3d 4F, 3d 4D, 4s 4P, and 3d 4P were carried out using the R-matrix code described by Berrington et al. (1978) and the NIEM code described by Henry et al. (1981). Results are presented for the thermally averaged collision strengths for the five-state and six-state calculations. Convergence behaviors were examined by comparison with the six-state calculations and the previously obtained two-state calculations. Uncertainties for these transitions were estimated to be within 20 percent, except for the 4S0 - 3p4 4P transition in which a 40 percent uncertainty was estimated.

Ho, Y. K.↗
NASA NTRS1989

The effect of processing on autohesive strength development in thermoplastic resins and composites

In the present investigation of processing effects on the autohesive bond strength of neat polysulfone resin and graphite-reinforced polysulfone-matrix composites measured resin bond strength development in precracked compact tension specimens 'healed' by heating over a contact period at a given temperature. The critical strain energy release rate of refractured composite specimens did not exhibit the strong time or temperature dependence of the neat resin tests; only 80-90 percent of the undamaged fracture energy is recoverable.

Howes, Jeremy C.↗
NASA NTRS1989

Strain intensity factor approach for predicting the strength of continuously reinforced metal matrix composites

A method was previously developed to predict the fracture toughness (stress intensity factor at failure) of composites in terms of the elastic constants and the tensile failing strain of the fibers. The method was applied to boron/aluminum composites made with various proportions of 0 deg and +/- 45 deg plies. Predicted values of fracture toughness were in gross error because widespread yielding of the aluminum matrix made the compliance very nonlinear. An alternate method was develolped to predict the strain intensity factor at failure rather than the stress intensity factor because the singular strain field was not affected by yielding as much as the stress field. Far-field strains at failure were calculated from the strain intensity factor, and then strengths were calculated from the far-field strains using uniaxial stress-strain curves. The predicted strengths were in good agreement with experimental values, even for the very nonlinear laminates that contained only +/- 45 deg plies. This approach should be valid for other metal matrix composites that have continuous fibers.

Poe, Clarence C., Jr.↗
NASA NTRS1990

Connection between leading-edge sweep, vortex lift, and vortex strength for delta wings

An effort is made to clarify the effect of leading-edge sweep on the vortex lift and leading-edge vortex strength of a slender wing; while it is often assumed that increasing sweep enhances vortex lift and strength, the opposite is the case. The suction analogy is used in association with numerical and experimental data to derive simple formulas yielding the actual relationship for delta wings. The difference between vortex lift and nonlinear lift is highlighted.

Hemsch, Michael J.↗
NASA NTRS1990

Impact damage and residual strength analysis of composite panels with bonded stiffeners

Blade-stiffened, compression-loaded cover panels were designed, manufactured, analyzed, and tested. All panels were fabricated from IM6/1808I interleafed graphite-epoxy. An orthotropic blade stiffener and an orthotropic skin were selected to satisfy the design requirements for an advanced aircraft configuration. All specimens were impact damaged prior to testing. Experimental results were obtained for three- and five-stiffener panels. Analytical results described interlaminar forces caused by impact and predicted specimen residual strength. The analytical results compared reasonably with the experimental results for residual strength of the specimens.

Madan, Ram C.↗
NASA NTRS1990

New tabulation of the bound-continuum optical oscillator strength in hydrogenic atoms

Results are presented from calculations of the optical oscillator strength f(n, l, n-sqared epsilon), for hydrogenic atoms in the initial state n., and the final energy state, epsilon, for the range n between 1 and 50, l between 0 and 26, and epsilon between 0 and 10 to the 7th rydbergs/n-sqared. In addition, the bound-continuum oscillator strength is tabulated. The results of the calculations are compared with previously published values, showing satisfactory agreement.

Omidvar, Kazem↗