Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Automatic definition of spectral units in the equatorial regions of Mars

ISM was the first instrument that acquired spectra of small areas (25x25 sq km) on a planetary surface. The data set consists mainly in images made up of about 3000 such pixels, each one corresponding to a near-infrared spectrum (0.76 to 3.15 microns in 128 spectral channels) with high signal-to-noise ratio. These data were used to define spectral units and to constrain the mineralogy of surface materials in the equatorial regions of the planet. Future spaceborne imaging spectrometers (e.g. OMEGA on board the Mars-94 Russian spacecraft) are expected to provide several hundred times as much data as ISM, so there's a strong need for fast and reliable processing methods. The present work is an attempt to define spectral units in the region of Syrtis Major-Isidis Planitia by means of G-mode analysis. The method allows to cluster the spectra according to their similarities; different levels of classification can be achieved by tuning a threshold of confidence.

Erard, Stephane↗
NASA NTRS1977

Mass flow requirements for LFC wing design

The problem of determining optimum suction mass flow requirements for LFC wings is addressed. Some previous methods for predicting the extent of laminar flow over swept wings with suction are briefly reviewed. These range from the purely empirical to those utilizing tabulated linear stability computations. The present method is described. This method solves the linear, incompressible stability equations by spectral techniques. The maximum temporal amplification of boundary layer crossflow and 2-D disturbances is determined for waves of a given frequency. Group velocities are used to integrate these amplification rates along the wing to yield the logarithmic amplitude ratio or 'N factor' of the disturbance. The 'N factor' calibration of a computer code utilizing this method is described, using experimentally determined transition data. The method is shown to be as consistent as previously used 'fixed wavelength' methods.

Srokowski, A. J.↗
NASA NTRS1983

Gravity waves in the thermosphere observed by the AE satellites

Atmospheric Explorer (AE) satellite data were used to investigate the spectra characteristics of wave-like structure observed in the neutral and ionized components of the thermosphere. Power spectral analysis derived by the maximum entropy method indicate the existence of a broad spectrum of scale sizes for the fluctuations ranging from tens to thousands of kilometers.

Gross, S. H.↗
NASA NTRS1985

Solar monochromatic images in magneto-sensitive spectral lines and maps of vector magnetic fields

A new method which allows by use of the monochromatic images in some magneto-sensitive spectra line to derive both the magnetic field strength as well as the angle between magnetic field lines and line of sight for various places in solar active regions is described. In this way two dimensional maps of vector magnetic fields may be constructed. This method was applied to some observational material and reasonable results were obtained. In addition, a project for constructing the three dimensional maps of vector magnetic fields was worked out.

Shihui, Y.↗
NASA NTRS1985

The synchrotron-self-Compton process in spherical geometries. I - Theoretical framework

Both spatial and spectral accuracies are stressed in the present method for the calculation of the synchrotron-self-Compton model in spherical geometries, especially in the partially opaque regime of the synchrotron spectrum of inhomogeneous sources that can span a few frequency decades and contribute a significant portion of the scattered flux. A formalism is developed that permits accurate calculation of incident photon density throughout an optically thin sphere. An approximation to the Klein-Nishina cross section is used to model the effects of variable electron and incident photon cutoffs, as well as the decrease in the cross section at high energies. General results are derived for the case of inhomogeneous sources with power law profiles in both electron density and magnetic field.

Band, D. L.↗
NASA NTRS1986

Reduction of weather effects in the calculation of sea ice concentration from microwave radiances

A technique is presented which improves existing methods of calculating sea ice concentrations from microwave radiances by reducing weather-related effects over open ocean areas and in the vicinity of marginal sea ice zones. Winds, atmospheric water vapor, cloud liquid water, and rain increase the microwave emission over these regions and thus result in erroneous values of computed sea ice concentration. The method described is based on the microwave spectral properties of sea ice and ice-free ocean and utilizes ratios of the polarized radiances at the 0.81-cm (37 GHz) and 1.7-cm (18 GHz) wavelengths. Following a discussion of the physical basis for this technique, examples are provided which demonstrate its utility. While the technique was developed for use with the Nimbus 7 scanning multichannel microwave radiometer data, it is applicable also to data from other microwave radiometers operating in a similar wavelength range.

Gloersen, P.↗
NASA NTRS1987

Measurement from satellites of land surface parameters and fluxes in the thermal infrared bands: Problems and methods

The main problems arising in the elaboration of accurate and reliable algorithms for extracting land surface parameters and flux from their measured radiances are discussed. Methods of solution in the thermal infrared spectral domain are described. Particular interest is given to the inversion of thermal models and to the problems resulting from the heterogeneity of the observed surfaces.

Becker, F.↗
NASA NTRS1989

Estimation of the two-dimensional ocean current shear field with a synthetic aperture radar

A double inverse method to convert SAR data to estimates of current shear was developed theoretically. Problems of applying the technique to real SAR data were examined. The first step of the inversion process involved elimination of noise in the (x-vector, k-vector) wave spectra deduced from SAR images. The second step, estimation of current shear, required the existence of well defined swell and a favorable single of interaction between swell and ocean current. Application of the method in the Antarctic circumpolar current encountered sea conditions that both satisfied and violated these requirements. Where the wave-current geometry was favorable, realistic surface current velocity fields were obtained, suggesting the presence of a substantial mesoscale eddy. Another attempt to apply the method in the Gulf Stream produced wave spectral estimates that showed no clear peak and hence produced no current estimates.

Barnett, Tim P.↗
NASA NTRS1991

The pulse-pair algorithm as a robust estimator of turbulent weather spectral parameters using airborne pulse Doppler radar

The pulse pair method for spectrum parameter estimation is commonly used in pulse Doppler weather radar signal processing since it is economical to implement and can be shown to be a maximum likelihood estimator. With the use of airborne weather radar for windshear detection, the turbulent weather and strong ground clutter return spectrum differs from that assumed in its derivation, so the performance robustness of the pulse pair technique must be understood. Here, the effect of radar system pulse to pulse phase jitter and signal spectrum skew on the pulse pair algorithm performance is discussed. Phase jitter effect may be significant when the weather return signal to clutter ratio is very low and clutter rejection filtering is attempted. The analysis can be used to develop design specifications for airborne radar system phase stability. It is also shown that the weather return spectrum skew can cause a significant bias in the pulse pair mean windspeed estimates, and that the poly pulse pair algorithm can reduce this bias. It is suggested that use of a spectrum mode estimator may be more appropriate in characterizing the windspeed within a radar range resolution cell for detection of hazardous windspeed gradients.

Baxa, Ernest G., Jr.↗
NASA NTRS1991

Three-dimensional simulations of large eddies in the compressible mixing layer

Consideration is given to the effect of compressibility on a plane mixing layer that is a prototype free shear layer, amenable to study by numerical simulation and experiment. The full time-dependent compressible Navier-Stokes equations are solved numerically for a temporally evolving mixing layer employing a mixed spectral and high-order finite difference method. Simulations with random initial conditions confirm the prediction of linear stability theory that at high Mach numbers oblique waves grow faster than two-dimensional waves. Simulations are presented of the nonlinear temporal evolution of the most rapidly amplified linear instability waves.

Sandham, N. D.↗
NASA NTRS1993

The effects of cloud inhomogeneities upon radiative fluxes, and the supply of a cloud truth validation dataset

A series of cloud and sea ice retrieval algorithms are being developed in support of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Science Team objectives. These retrievals include the following: cloud fractional area, cloud optical thickness, cloud phase (water or ice), cloud particle effective radius, cloud top heights, cloud base height, cloud top temperature, cloud emissivity, cloud 3-D structure, cloud field scales of organization, sea ice fractional area, sea ice temperature, sea ice albedo, and sea surface temperature. Due to the problems of accurately retrieving cloud properties over bright surfaces, an advanced cloud classification method was developed which is based upon spectral and textural features and artificial intelligence classifiers.

Welch, Ronald M.↗
NASA NTRS1995

The 1994 international transatlantic two-way satellite time and frequency transfer experiment: Preliminary results

The international transatlantic time and frequency transfer experiment was designed by participating laboratories and has been implemented during 1994 to test the international communications path involving a large number of transmitting stations. This paper will present empirically determined clock and time scale differences, time and frequency domain instabilities, and a representative power spectral density analysis. The experiments by the method of co-location which will allow absolute calibration of the participating laboratories have been performed. Absolute time differences and accuracy levels of this experiment will be assessed in the near future.

Deyoung, James A.↗
NASA NTRS1994

Flexural rigidity of the Basin and Range-Colorado Plateau-Rocky Mountain transition from coherence analysis of gravity and topography

Stochastic inversion for flexural loads and flexural rigidity of the continental elastic layer can be accomplished most effectively by using the coherence of gravity and topography. However, the spatial resolution of coherence analysis has been limited by use of two-dimensional periodogram spectra from very large (greater than 10(exp 5)sq km) windows that generally include multiple tectonic features. Using a two-dimensional spectral estimator based on the maximum entropy method, the spatial resolution of flexural proerties can be enhanced by a factor of 4 or more, enabling more detailed analysis at the scale of individual tectonic features. This new approach is used to map the spatial variation of flexural rigidity along the Basin and Range transition to the Colorado Plateau and Middle Rocky Mountains physiographic provinces. Large variations in flexural isostatic responses are found, with rigidities ranging from as low as 8.7 x 10(exp 20) N m (elastic thickness (T(sub e) = 4.6 km) in the Basin and Range to as high as 4.1 x 10(exp 24) N m T(sub e) = 77 km) in the Middle Rocky Mountains. These results compare favorably woith independent determinations of flexural rigidity in the region. Areas of low flexural rigidity correlate strongly with areas of high surface heat flow, as is expected from the contingence of flexural rigidity on a temperature-dependent flow law. Also, late Cenozoic normal faults with large displacements are found primarily in area of low flexural rigidity region. The highest flexural rigidity is found within the Archean Wyoming craton, where evidence suggests that deeply rooted cratonic lithosphere may play a role in determining the distribution of tectonism at the surface.

Lowery, Anthony R.↗
NASA NTRS1996

Radiative Transfer in the Lower Atmosphere Based on TOMS/ADEOS Measurements

The long-term objective of this research is to develop and apply methods to compute the solar ultraviolet (UV) spectral irradiance at the earth's surface using information to be provided by the TOMS/ADEOS data set. The broad philosophy is to view the TOMS measurements as a probe of the radiative transfer properties of the earth's atmosphere. Prior to the launch of ADEOS, we have focused on analysis of the Nimbus 7 TOMS data base as well as the development of numerical models for eventual use with ADEOS measurements. The emphasis of recent work has been on numerical modeling of the radiative effects of cloudy skies in the UV part of the spectrum.

Frederick, John E.↗
NASA NTRS1997

Nonstationary Transient Vibroacoustic Response of a Beam Structure

This study consists of an investigation into the nonstationary transient response of the Verification Test Article (VETA) when subjected to random acoustic excitation. The goal is to assess excitation models that can be used in the design of structures and equipment when knowledge of the structure and the excitation is limited. The VETA is an instrumented cantilever beam that was exposed to acoustic loading during five Space Shuttle launches. The VETA analytical structural model response is estimated using the direct averaged power spectral density and the normalized pressure spectra methods. The estimated responses are compared to the measured response of the VETA. These comparisons are discussed with a focus on prediction conservatism and current design practice.

Caimi, R. E.↗
NASA NTRS2000

A Common Calibration Source Framework for Fully-Polarimetric and Interferometric Radiometers

Two types of microwave radiometry--synthetic thinned array radiometry (STAR) and fully-polarimetric (FP) radiometry--have received increasing attention during the last several years. STAR radiometers offer a technological solution to achieving high spatial resolution imaging from orbit without requiring a filled aperture or a moving antenna, and FP radiometers measure extra polarization state information upon which entirely new or more robust geophysical retrieval algorithms can be based. Radiometer configurations used for both STAR and FP instruments share one fundamental feature that distinguishes them from more 'standard' radiometers, namely, they measure correlations between pairs of microwave signals. The calibration requirements for correlation radiometers are broader than those for standard radiometers. Quantities of interest include total powers, complex correlation coefficients, various offsets, and possible nonlinearities. A candidate for an ideal calibration source would be one that injects test signals with precisely controllable correlation coefficients and absolute powers simultaneously into a pair of receivers, permitting all of these calibration quantities to be measured. The complex nature of correlation radiometer calibration, coupled with certain inherent similarities between STAR and FP instruments, suggests significant leverage in addressing both problems together. Recognizing this, a project was recently begun at NASA Goddard Space Flight Center to develop a compact low-power subsystem for spaceflight STAR or FP receiver calibration. We present a common theoretical framework for the design of signals for a controlled correlation calibration source. A statistical model is described, along with temporal and spectral constraints on such signals. Finally, a method for realizing these signals is demonstrated using a Matlab-based implementation.

Kim, Edward J.↗
NASA NTRS2001

Microstructural Investigation of High Emittance Glass Coatings on Fibrous Ceramic Insulation

This viewgraph presentation provides an overview of the Space Shuttle Thermal Protection System (TPS) and the various products incorporated in the TPS. There are three tile systems which include pure silica, fibrous refractory composite insulation (FRCI), and alumina enhanced thermal barrier (AETB). Coating systems include reaction cured glass (RCG) and toughened uni-piece insulation (TUFI). The microstructures of these systems are explored as are the manufacturing processes associated with each. Microstructural investigation using methods such as automated X-ray spectral image analysis (AXSIA) is a crucial part of understanding the mechanical nature of these systems.

Ellerby, Don↗