Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Effect of a copper filler metal on the microstructure and mechanical properties of electron beam welded titanium-stainless steel joint

Cracking in an electron beam weld of titanium to stainless steel occurred during the cooling process because of internal thermal stress. Using a copper filler metal, a crack free joint was obtained, which had a tensile strength of 310 MPa. To determine the reasons for cracking in the Ti/Fe joint and the function of the copper filler metal on the improvement of the cracking resistance of the Ti/Cu/Fe joint, the microstructures of the joints were studied by optical microscopy, scanning electron microscopy and X-ray diffraction. The cracking susceptibilities of the joints were evaluated with microhardness tests on the cross-sections. In addition, microindentation tests were used to compare the brittleness of the intermetallics in the welds. The results showed that the Ti/Fe joint was characterized by continuously distributed brittle intermetallics such as TiFe and TiFe(Cr){sub 2} with high hardness ({approx} 1200 HV). For the Ti/Cu/Fe joint, most of the weld consisted of a soft solid solution of copper with dispersed TiFe intermetallics. The transition region between the weld and the titanium alloy was made up of a relatively soft Ti-Cu intermetallic layer with a lower hardness ({approx} 500 HV). The formation of soft phases reduced the cracking susceptibility of the joint. - Highlights: Black-Right-Pointing-Pointer Electron beam welded Ti/Fe joint cracked for the brittleness and residual stress. Black-Right-Pointing-Pointer Electron beam welded Ti/Cu/Fe joint with tensile strength of 310 MPa was obtained. Black-Right-Pointing-Pointer Cu diluted Ti and Fe contents in weld and separated the TiFe{sub 2} into individual blocks. Black-Right-Pointing-Pointer Interfacial hard Ti-Fe compounds were replaced by soft Ti-Cu compounds in the weld. Black-Right-Pointing-Pointer A large amount of solid solution of copper formed in the weld.

36 MATERIALS SCIENCE↗

The effect of boron addition on the deformation behavior and microstructure of β-solidify TiAl alloys

Highlights: • Borides could promote the DRX formation to soften TiAl alloys. • Boron addition increases firstly and then stabilizes the deformation activate energy. • The stable region expands with boron increasing in processing maps. • The DRX critical strain increases firstly and then decreases with boron increasing. • DRX softening and strengthening from solid solution and borides influence deformation behavior. - Abstract: The effect of boron addition on the deformation behavior and microstructure of Ti-43Al-6Nb-1Mo -1Cr alloys have been studied in this paper. Boron addition would induce Ti{sub 2}Al(P6{sub 3}/mmc) phase with hexagonal structure formation on the interfaces between TiB and γ phase. TiB would be the obstacles for dislocations slipping and increase the stacking fault energy. Ti{sub 2}Al could also provide the chemical foundation for DRXed γ nucleation and disappear after thermal deformation. Both these two phase could promote DRXed grains nucleation to soften the alloys during thermal deformation. With the strengthen effect of boron solid solution and TiB obstacles, the microstructure evolution, phase transformation and deformation behavior are also discussed and concluded as follow.

36 MATERIALS SCIENCE↗

Preparation and characterization of rare earth orthoborates, LnBO{sub 3} (Ln = Tb, La, Pr, Nd, Sm, Eu, Gd, Dy, Y) and LaBO{sub 3}:Gd, Tb, Eu by metathesis reaction: ESR of LaBO{sub 3}:Gd and luminescence of LaBO{sub 3}:Tb, Eu

Highlights: {yields} Orthoborates and their solid solutions were prepared by metathesis reaction. {yields} NaCl (by-product) is the driving force for these metathesis reactions. {yields} Structural refinement for TbBO{sub 3} was carried out. {yields} Spin-Hamiltonian parameters of Gd{sup 3+} were deduced from the ESR spectra of LaBO{sub 3}:Gd. -- Abstract: Lanthanide orthoborates of composition LnBO{sub 3} (Ln = Tb, La, Pr, Nd, Sm, Eu, Gd, Dy, Y) and LaBO{sub 3}:Gd, Tb, Eu have been prepared by metathesis reaction. This method provides a convenient route for the synthesis of orthoborates and its solid solutions at low temperatures. Powder X-ray diffraction and FT-IR spectroscopy were used to characterize these borates. Rare earth borates, (LnBO{sub 3}) are isomorphous with different forms of CaCO{sub 3} depending on the radius of rare earth ion. LaBO{sub 3}, LaBO{sub 3}:Gd, Tb, Eu, PrBO{sub 3}, NdBO{sub 3} crystallized in aragonite structure, SmBO{sub 3} crystallized in H-form and TbBO{sub 3}, EuBO{sub 3}, GdBO{sub 3}, DyBO{sub 3}, YBO{sub 3} crystallized in vaterite structure. The structural analysis of TbBO{sub 3} was carried out. The morphology of these borates was obtained from Scanning electron microscopy. Spin-Hamiltonian parameters for Gd{sup 3+} are deduced from room temperature electron spin resonance spectrum of LaBO{sub 3}:Gd. The luminescence of LaBO{sub 3}:Tb, Eu gave characteristics peaks corresponding to Tb{sup 3+}, Eu{sup 3+} respectively.

36 MATERIALS SCIENCE↗

Solution precursor synthesis and magnetic properties of Eu{sub 1-x}Ca{sub x}TiO{sub 3}

Europium titanate, EuTiO{sub 3}, is a paraelectric/antiferromagnetic cubic perovskite with T{sub N}=5.5 K. It is predicted that compressive strain could induce simultaneous ferroelectricity and ferromagnetism in this material, leading to multiferroic behavior. As an alternative to epitaxial strain, we explored lattice contraction via chemical substitution of Eu{sup 2+} with the smaller Ca{sup 2+} cation as a mechanism to tune the magnetic properties of EuTiO{sub 3}. A modified sol-gel process was used to form homogeneously mixed precursors containing Eu{sup 3+}, Ca{sup 2+}, and Ti{sup 4+}, and reductive annealing was used to transform these precursors into crystalline powders of Eu{sub 1-x}Ca{sub x}TiO{sub 3} with x=0.00, 0.05, 0.10, 0.15, 0.25, 0.35, 0.50, 0.55, 0.60, 0.65, 0.80, and 1.00. Powder XRD data indicated that a continuous Eu{sub 1-x}Ca{sub x}TiO{sub 3} solid solution was readily accessible, and the lattice constants agreed well with those predicted by Vegard's law. SEM imaging and EDS element mapping indicated a homogeneous distribution of Eu, Ca, and Ti throughout the polycrystalline sample, and the actual Eu:Ca ratio agreed well with the nominal stoichiometry. Measurements of magnetic susceptibility vs. temperature indicated antiferromagnetic ordering in samples with x<=0.60, with T{sub N} decreasing from 5.4 K in EuTiO{sub 3} to 2.6 K in Eu{sub 0.40}Ca{sub 0.60}TiO{sub 3}. No antiferromagnetic ordering above 1.8 K was detected in samples with x>0.60. - Graphical abstract: Twelve members of the Eu{sub 1-x}Ca{sub x}TiO{sub 3} solid solution (0<=x<=1) were synthesized by first forming a homogeneously mixed precursor using a modified sol-gel process, followed by reductive annealing. Samples with x<=0.60 are antiferromagnetic, with T{sub N} decreasing as the level of calcium substitution increases.

36 MATERIALS SCIENCE↗

Ti{sub 2}AlN thin films synthesized by annealing of (Ti+Al)/AlN multilayers

Highlights: • Epitaxial thin films of the MAX phase Ti{sub 2}AlN are obtained by thermal annealing. • A new metastable (Ti,Al,N) solid solution with the structure of α-T is evidenced. • The formation of the MAX phase occurs at low temperature (600 °C). - Abstract: Single-phase Ti{sub 2}AlN thin films were obtained by annealing in vacuum of (Ti + Al)/AlN multilayers deposited at room temperature by magnetron sputtering onto single-crystalline (0001) 4H-SiC and (0001) Al{sub 2}O{sub 3} substrates. In-situ X-ray diffraction experiments combined with ex-situ cross-sectional transmission electron microscopy observations reveal that interdiffusion processes occur in the multilayer at a temperature of ∼400 °C leading to the formation of a (Ti, Al, N) solid solution, having the hexagonal structure of α-Ti, whereas the formation of Ti{sub 2}AlN occurs at 550–600 °C. Highly oriented (0002) Ti{sub 2}AlN thin films can be obtained after an annealing at 750 °C.

36 MATERIALS SCIENCE↗

Facile microwave synthesis of zirconium metal-organic framework thin films on gold and silicon and application to sensor functionalization

Zirconium-based metal-organic frameworks, including UiO-66 and related frameworks, have become the focus of considerable research in the area of chemical warfare agent (CWA) decontamination. However, little work has been reported exploring these metal-organic frameworks (MOFs) for CWA sensing applications. For many sensing approaches, the growth of high-quality thin films of the active material is required, and thin film growth methods must be compatible with complex device architectures. Several approaches to synthesize thin films of UiO-66 have been described but many of these existing methods are complex or time consuming. In this work, we describe the development of a simple and rapid microwave assisted synthesis of oriented UiO-66 thin films on unmodified silicon (Si) and gold (Au) substrates. Thin films of UiO-66 and UiO-66-NH 2 can be grown in as little as 2 min on gold substrates and 30 min on Si substrates. The film morphology and orientation are characterized and the effects of reaction time and temperature on thin film growth on Au are investigated. Both reaction time and temperature impact the overgrowth of protruding discrete crystallites in the thin film layer but, surprisingly, no strong correlation is observed between film thickness and reaction time or temperature. We also briefly describe the synthesis of Zr/Ce solid solution thin films of UiO-66 on Au and report the first synthesis of a solid solution thin film MOF. Finally, we demonstrate the utility of the microwave method for the facile functionalization of two sensor architectures, plasmonic nanohole arrays and microresonators, with UiO-66 thin films.

36 MATERIALS SCIENCE↗

Semiconductor/relaxor 0–3 type composites without thermal depolarization in Bi 0.5 Na 0.5 TiO 3 -based lead-free piezoceramics

Commercial lead-based piezoelectric materials raised worldwide environmental concerns in the past decade. Bi 0.5 Na 0.5 TiO 3 -based solid solution is among the most promising lead-free piezoelectric candidates; however, depolarization of these solid solutions is a longstanding obstacle for their practical applications. Here we use a strategy to defer the thermal depolarization, even render depolarization-free Bi 0.5 Na 0.5 TiO 3 -based 0–3-type composites. This is achieved by introducing semiconducting ZnO particles into the relaxor ferroelectric 0.94Bi 0.5 Na 0.5 TiO 3 –0.06BaTiO 3 matrix. The depolarization temperature increases with increasing ZnO concentration until depolarization disappears at 30 mol% ZnO. The semiconducting nature of ZnO provides charges to partially compensate the ferroelectric depolarization field. These results not only pave the way for applications of Bi 0.5 Na 0.5 TiO 3 -based piezoceramics, but also have great impact on the understanding of the mechanism of depolarization so as to provide a new design to optimize the performance of lead-free piezoelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and crystal structure of Ln{sub 2}M{sup 2+}Ge{sub 4}O{sub 12}, Ln=rare-earth element or Y; M=Ca, Mn, Zn

The crystal structure of the promising optical materials Ln{sub 2}M{sup 2+}Ge{sub 4}O{sub 12}, where Ln=rare-earth element or Y; M=Ca, Mn, Zn and their solid solutions has been studied in detail. The tendency of rare-earth elements to occupy six- or eight-coordinated sites upon iso- and heterovalent substitution has been studied for the Y{sub 2-x}Er{sub x}CaGe{sub 4}O{sub 12} (x=0-2), Y{sub 2-2x}Ce{sub x}Ca{sub 1+x}Ge{sub 4}O{sub 12} (x=0-1), Y{sub 2}Ca{sub 1-x}Mn{sub x}Ge{sub 4}O{sub 12} (x=0-1) and Y{sub 2-x}Pr{sub x}MnGe{sub 4}O{sub 12} (x=0-0.5) solid solutions. A complex heterovalent state of Eu and Mn in Eu{sub 2}MnGe{sub 4}O{sub 12} has been found. - Graphical abstract: Crystal structure of Ln{sub 2}MGe{sub 4}O{sub 12}, where Ln=rare-earth element or Y; M=Ca, Mn, Zn.

36 MATERIALS SCIENCE↗

Transformation of meta-stable calcium silicate hydrates to tobermorite: reaction kinetics and molecular structure from XRD and NMR spectroscopy

Understanding the integrity of well-bore systems that are lined with Portland-based cements is critical to the successful storage of sequestered CO 2 in gas and oil reservoirs. As a first step, we investigate reaction rates and mechanistic pathways for cement mineral growth in the absence of CO 2 by coupling water chemistry with XRD and NMR spectroscopic data. We find that semicrystalline calcium (alumino-)silicate hydrate (Al-CSH) forms as a precursor solid to the cement mineral tobermorite. Rate constants for tobermorite growth were found to be k = 0.6 (± 0.1) × 10 -5 s -1 for a solution:solid of 10:1 and 1.6 (± 0.8) × 10 -4 s -1 for a solution:solid of 5:1 (batch mode; T = 150°C). This data indicates that reaction rates for tobermorite growth are faster when the solution volume is reduced by half, suggesting that rates are dependent on solution saturation and that the Gibbs free energy is the reaction driver. However, calculated solution saturation indexes for Al-CSH and tobermorite differ by less than one log unit, which is within the measured uncertainty. Based on this data, we consider both heterogeneous nucleation as the thermodynamic driver and internal restructuring as possible mechanistic pathways for growth. We also use NMR spectroscopy to characterize the site symmetry and bonding environment of Al and Si in a reacted tobermorite sample. We find two [4] Al coordination structures at δ iso = 59.9 ppm and 66.3 ppm with quadrupolar product parameters (P Q ) of 0.21 MHz and 0.10 MHz (± 0.08) from 27 Al 3Q-MAS NMR and speculate on the Al occupancy of framework sites by probing the protonation environment of Al metal centers using 27 Al{ 1 H}CP-MAS NMR.

58 GEOSCIENCES↗

Phase transitions of BaTi{sub 0.9}Rh{sub 0.1}O{sub 3±δ} perovskite-type oxides under reducing environments

Highlights: • Solid solution formation BaTi{sub 0.9}Rh{sub 0.1}O{sub 3±δ} with a new wet chemical synthesis method. • Rhodium in the BaTiO{sub 3} perovskite stabilizes the hexagonal structure. • New Rh segregation mechanism for hexagonal BaTi{sub 0.9}Rh{sub 0.1}O{sub 3±δ} upon reduction. - Abstract: Perovskite-type oxides of composition BaTi{sub 0.9}Rh{sub 0.1}O{sub 3±δ} were prepared following a new chemical route that avoids the formation of hydroxyl species and precipitation, and allows the homogeneous distribution of Rh in the final mixed metal oxide. The high dispersion of Rh and the formation of the solid solution between Rh and the BaTiO{sub 3} perovskite is confirmed by means of X-ray diffraction (XRD) and extended X-ray absorption fine structure spectroscopy (EXAFS). The presence of Rh stabilized the hexagonal BaTi{sub 0.9}Rh{sub 0.1}O{sub 3±δ} phase, which decomposes into barium orthotitanate (BaTi{sub 2}O{sub 4}) and metallic Rh° in reducing environment. This phase transition starts already at 700 °C and is only partially completed at 900 °C suggesting that part of the Rh present in the perovskite lattice might not be easily reduced by hydrogen. These aspects and further open questions are discussed.

36 MATERIALS SCIENCE↗

Crystal and electronic structures of CaAl{sub 2}Si{sub 2}-type rare-earth copper zinc phosphides RECuZnP{sub 2} (RE=Pr, Nd, Gd-Tm, Lu)

The quaternary rare-earth phosphides RECuZnP{sub 2} (RE=Pr, Nd, Gd-Tm, Lu) have been prepared by reaction of the elements at 900 {sup o}C, completing this versatile series which forms for nearly all RE metals. They adopt the trigonal CaAl{sub 2}Si{sub 2}-type structure (Pearson symbol hP5, space group P3-bar m1, Z=1), as confirmed by single-crystal X-ray diffraction analysis on ErCuZnP{sub 2} and powder X-ray diffraction analysis on the remaining members. The Cu and Zn atoms are assumed to be disordered over the single transition-metal site. Band structure calculations on a hypothetically ordered YCuZnP{sub 2} model suggest a semimetal, with a zero band gap between the valence and conduction bands. This electronic structure is supported by XPS valence band spectra for RECuZnP{sub 2} (RE=Gd-Er), in which the intensity drops off smoothly at the Fermi edge. The absence of a band gap permits the electron count to deviate from the precise value of 16 e{sup -} per formula unit, as demonstrated by the formation of a solid solution in GdCu{sub x}Zn{sub 2-x}P{sub 2} (1.0{<=}x{<=}1.3), while still retaining the CaAl{sub 2}Si{sub 2}-type structure. Because the Cu 2p XPS spectra indicate that the Cu atoms are always monovalent, the substitution of Cu for Zn leads to a decrease in electron count and a lowering of the Fermi level in the valence band. The magnetic susceptibility of RECuZnP{sub 2} (RE=Gd-Er), which obeys the Curie-Weiss law, confirms the presence of trivalent RE atoms. -- Graphical abstract: The absence of a band gap in the semimetallic quaternary rare-earth phosphides RECuZnP{sub 2} permits the formation of a solid solution such as GdCu{sub x}Zn{sub 2-x}P{sub 2} through hole-doping of the valence band. Display Omitted

36 MATERIALS SCIENCE↗

Study of cerium solubility in Gd2Zr2O7 by DFT+U calculations

The pyrochlore Gd2Zr2O7 has been proposed as a favorable structure for the immobilization of actinide nuclear waste, due to its high radiation resistance. Because CeO2 exhibits similar properties and radiation response to many actinide dioxides, it is often used as a surrogate for actinide dioxides in both experimental and computational studies. In the present work, we investigate the solubility of Ce in Gd2Zr2O7, as well as the energetic and electronic properties of Gd2-yCeyZr2O7, based on density functional theory plus Hubbard U correction (DFT + U). Our calculations show that Gd2Zr2O7 and Ce2Zr2O7 form a solid solution over the entire range of Ce content, in excellent agreement with experiments. The increased stability of the ordered pyrochlore structure with increasing Ce content may affect radiation resistance.

36 MATERIALS SCIENCE↗

Spin-driven ferroelectricity in the delafossite CuFe{sub 1-x}Rh{sub x}O{sub 2} (0<=x<=0.15)

The effect of substitution at the Fe site in the CuFeO{sub 2} delafossite is known to induce a magnetic structure responsible for the appearance of electric polarization. A CuFe{sub 1-x}Rh{sub x}O{sub 2} series of ceramic samples is studied in order to determine the composition range exhibiting such a polar state. It is found that for the CuFe{sub 1-x}Rh{sub x}O{sub 2} (x<=0.15) solid solution, the Neel temperature T{sub N2} decreases monotonously with x from 11.5 K to 5.9 K, for x=0.00 to 0.15, respectively, and that the dielectric peak and the polarization transition temperatures coincide with T{sub N2}. In contrast, the dielectric peak and polarization magnitudes go through an optimum for CuFe{sub 0.92}Rh{sub 0.08}O{sub 2} (x=0.08). These results demonstrate that, compared to other substituting elements, the Rh{sup 3+} for Fe{sup 3+} substitution in CuFeO{sub 2} allows to extend significantly the ferroelectric region in the (x, T) phase diagram in connection with the slower T{sub N2} decrease. - Graphical Abstract: Polycrystalline samples of the delafossite solid solution CuFe{sub 1-x}Rh{sub x}O{sub 2} were synthesized and characterized. Polarization has been observed in the range 0.02<x<=0.15 with characteristic temperatures in coincidence with magnetic transition temperatures.

36 MATERIALS SCIENCE↗

Precipitation in cold-rolled Al–Sc–Zr and Al–Mn–Sc–Zr alloys prepared by powder metallurgy

The effects of cold-rolling on thermal, mechanical and electrical properties, microstructure and recrystallization behaviour of the AlScZr and AlMnScZr alloys prepared by powder metallurgy were studied. The powder was produced by atomising in argon with 1% oxygen and then consolidated by hot extrusion at 350 °C. The electrical resistometry and microhardness together with differential scanning calorimetry measurements were compared with microstructure development observed by transmission and scanning electron microscopy, X-ray diffraction and electron backscatter diffraction. Fine (sub)grain structure developed and fine coherent Al{sub 3}Sc and/or Al{sub 3}(Sc,Zr) particles precipitated during extrusion at 350 °C in the alloys studied. Additional precipitation of the Al{sub 3}Sc and/or Al{sub 3}(Sc,Zr) particles and/or their coarsening was slightly facilitated by the previous cold rolling. The presence of Sc,Zr-containing particles has a significant antirecrystallization effect that prevents recrystallization at temperatures minimally up to 420 °C. The precipitation of the Al{sub 6}Mn- and/or Al{sub 6}(Mn,Fe) particles of a size ∼ 1.0 μm at subgrain boundaries has also an essential antirecrystallization effect and totally suppresses recrystallization during 32 h long annealing at 550 °C. The texture development of the alloys seems to be affected by high solid solution strengthening by Mn. The precipitation of the Mn-containing alloy is highly enhanced by a cold rolling. The apparent activation energy of the Al{sub 3}Sc particles formation and/or coarsening and that of the Al{sub 6}Mn and/or Al{sub 6}(Mn,Fe) particle precipitation in the powder and in the compacted alloys were determined. The cold deformation has no effect on the apparent activation energy values of the Al{sub 3}Sc-phase and the Al{sub 6}Mn-phase precipitation. - Highlights: • The Mn, Sc and Zr additions to Al totally suppresses recrystallization at 550 °C. • The Sc,Zr-containing particle precipitation is slightly facilitated by cold rolling. • The Mn-containing particle precipitation is highly enhanced by cold rolling. • Cold rolling has no effect on activation energy of the Al{sub 3}Sc and Al{sub 6}Mn precipitation. • The texture development is affected by high solid solution strengthening by Mn.

36 MATERIALS SCIENCE↗

Influence of crystal structure on the Co{sup II} diffusion behavior in the Zn{sub 1-x}Co{sub x}O system

The solid state interaction of the Zn{sub 1-x}Co{sub x}O nominal system is investigated by means of diffusion couples and analysis of co-precipitated samples. The formation of a homogeneous Co:ZnO solid solution is found to be determined by the crystal structure from which Co{sup II} ions diffuse into the wurtzite lattice. No diffusion is observed whenever the CoO rock-salt structure is formed from the Co{sup II} precursor. On the contrary, the diffusion from the Co{sub 3}O{sub 4} spinel phase is feasible but has a limited temperature range defined by the reduction at a high temperature of Co{sup III}-Co{sup II}, since this process again leads to the formation of the rock-salt structure. However, when using a highly reactive and homogeneous co-precipitated starting powder, neither the spinel phase nor the rock-salt structure is formed, and a Co{sup II}:ZnO solid solution is obtained, which remains stable up to high temperatures. - Graphical abstract: Maximum diffusion distance for the ZnO-CoO{sub x} couple as a function of temperature. Dashed gray lines represent the temperature values at which the transformations between CoO and Co{sub 3}O{sub 4} compounds take place.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and calculated phases in two as-cast and annealed Mg-Zn-Y alloys

The CALPHAD (Calculation of Phase Diagram) method was used to select ternary alloys from Mg-Zn-Y system, aimed at determining the role of precipitates in the microstructure and texture evolution of Mg during and after deformation. The selected alloys are Mg-6Zn-1.2Y and Mg-5Zn-2Y. The constituent phases in the as-cast Mg-6Zn-1.2Y alloy are {alpha}-Mg solid solution phase and I (Mg{sub 3}YZn{sub 6}) intermetallic phase. The as-cast Mg-5Zn-2Y alloy is composed of {alpha}-Mg, I and W (Mg{sub 3}Y{sub 2}Zn{sub 3}) phases. The intermetallics in the two alloys form by eutectic reaction, which in Mg-5Zn-2Y alloy results in initially W-phase formation and ultimately I-phase formation during solidification. After heat treatment, the Mg-6Zn-1.2Y and Mg-5Zn-2Y alloys contain nearly the same amount of ternary intermetallics (I and W phases, respectively) in equilibrium with {alpha}-Mg solid solution phase. The main solute in {alpha}-Mg phase is Zn with the same amount in the two alloys. The type and quantity of the phases obtained experimentally disagree with the results obtained from the thermodynamic database. One important discrepancy is that, in Mg-6Zn-1.2Y alloy, the I phase is not stable at the temperature of 430 Degree-Sign C, and that the W phase is the stable phase at this temperature. The differences in the experimental and calculated data indicate that the Mg-Zn-Y system requires to be reassessed with more experimental data. - Highlights: Black-Right-Pointing-Pointer Mg-6Zn-1.2Y and Mg-5Zn-2Y alloys were selected by FactSage Trade-Mark-Sign Thermodynamic software. Black-Right-Pointing-Pointer The I and W intermetallics in the two alloys form by eutectic reaction. Black-Right-Pointing-Pointer The alloys contain similar amounts of different intermetallics in equilibrium with {alpha}-Mg. Black-Right-Pointing-Pointer In Mg-6Zn-1.2Y, the I phase is not stable at the temperature of 430 Degree-Sign C. Black-Right-Pointing-Pointer The hardness of W phase is determined to be lower than that of I phase.

36 MATERIALS SCIENCE↗

Probing the exact form and doping preference of magnesium in ordinary Portland cement clinker phases: A study from experiments and DFT simulations

Highlights: • The doping behaviors of Mg in OPC clinker phases were systematically studied. • About 1.3 wt% MgO enter OPC clinker phases by forming substitutional solid solutions. • In the 4 composed minerals, C{sub 3}S, C{sub 3}A and C{sub 4}AF can host more Mg ions than C{sub 2}S. • Mg ions prefer to replace Ca in C{sub 3}S, C{sub 2}S and C{sub 3}A while replace Fe and Ca in C{sub 4}AF. • Both the large structure distortions and formation energies governs the low solubility. A systematic study was performed to learn the exact existence form and doping behaviors of magnesium in ordinary Portland cement (OPC) clinker. Our results show that about 1.3 wt% MgO incorporates into OPC clinker phases by forming substitutional solid solutions while excess Mg accumulate and exist as periclase. Results from Rietveld refinement present a substitution preference in C{sub 3}S and C{sub 3}A over C{sub 2}S. More in-depth analyses from density function theoretical simulations show that in C{sub 3}S, C{sub 2}S and C{sub 3}A, the substitution occurs by replacing Ca while in C{sub 4}AF, it probably occurs by substituting Fe and Ca ions. The large structure distortions and sharp increase in formation energies with increasing MgO determines its low solubility. This work provides a clear understanding of the existence states and the intrinsic mechanism governing doping behaviors of Mg, thus should be very important in guiding the synthesis of OPC clinker by utilizing high-Mg limestone.

36 MATERIALS SCIENCE↗

Synthesis, structure and magnetic properties of new γ-Ba(CoV{sub 1-x}P{sub x}O{sub 4}){sub 2} x = 0.4–0.5

The phase composition of the system BaCo{sub 2}(VO{sub 4}){sub 2}–Ba(CoPO{sub 4}){sub 2} has been studied. At room temperature two miscibility gaps have been detected, with the formation of substitutional solid solutions Ba(CoV{sub 1-x}P{sub x}O{sub 4}){sub 2} for x = 0.4–0.5 basing on the γ-BCPO structure type. An increase in the vanadium cation concentration leads to the stabilization of the rhombohedral crystal lattice. The crystallographic characteristics of two new phosphate - vanadates Ba(CoV{sub 0.5}P{sub 0.5}O{sub 4}){sub 2} and Ba(CoV{sub 0.6}P{sub 0.4}O{sub 4}){sub 2} isostructural to γ-BCPO have been obtained, their crystal structures have been described, and their magnetic properties have been analyzed. It was shown that in α-BCPO, as distinct from other examined phases, a three-dimensional ferromagnetic ordering characterized by a wide hysteresis loop takes place at low temperatures. The enhanced values of the magnetic moment in the paramagnetic phase BaCo{sub 2}(VO{sub 4}){sub 2} and solid solutions based on γ-BCPO are attributed to the peculiarities of the crystal environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗