SEARCH · Engineering Papers

Results for “sequestration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Subtask 1.3 – Integrated Carbon Capture and Storage for North Dakota Ethanol Production

The Energy & Environmental Research Center (EERC), in partnership with Red Trail Energy, LLC (RTE), a North Dakota ethanol producer; the North Dakota Industrial Commission (NDIC) Renewable Energy Program (REP); and the U.S. Department of Energy (DOE), conducted a feasibility and implementation study for a commercial carbon capture and storage (CCS) effort. This subtask provided technical support and developed recommended practices of how small-scale industrial CO2 emitters (<1,000,000 tonnes of CO2 emitted annually) may economically deploy CCS. The 64-million-gallon dry mill RTE ethanol facility, emitting an average 180,000 tonnes of CO2 annually, was the subject of the case study. The positive outcome of this research, which shows technical and economic potential for ethanol–CCS in North Dakota, has resulted in RTE acquiring an approved Permit to Drill on December 2, 2019, for a stratigraphic test well in early 2020, a necessary step toward a North Dakota CO2 Storage Facility Permit (SFP) for the RTE CCS effort. Outcomes include 1) validating the Broom Creek Formation as a regional target for CCS, 2) determining the full carbon life cycle of an industrial fuel production facility with CCS, 3) developing a field implementation plan (FIP) for small-scale CCS, and 4) determining the validity and pathway for using CCS to meet low-carbon fuel (LCF) standards. The technical team included the EERC, RTE, Trimeric Corporation, Schlumberger Carbon Services, and Computer Modelling Group (CMG). Findings from activities conducted November 2016 – May 2020 are summarized as follows. Several key steps have been accomplished toward validating the Broom Creek Formation as a CO2 injection and storage target at the RTE CCS site, including verification of the presence and structure of sandstone layers that may comprise the potential CO2 storage reservoir and the several thousand feet of overlying confining zone. Work included site characterization using existing data, interpretation of seismic data within the study area, and geologic modeling simulation of CO2 injection. Interpreted results estimate 3000 feet of confining zone between the Broom Creek Formation (storage target) and the lowermost underground source of drinking water (e.g., the Fox Hills Formation). The thickness of the Broom Creek injection target varies 230–420 ft within the survey area. Results were used to inform the location of a stratigraphic test well and associated characterization test program. No impediments were identified within the targeted CO2 storage complex that would prevent the project from moving forward. A stratigraphic test well is the next step to validate these results and to acquire remaining data necessary to develop a North Dakota CO2 SFP application. The EERC generated full carbon life cycle estimates for CCS integration with the RTE ethanol facility. Results indicated that an average 40% reduction in CO2 emissions is possible through CCS implementation. Approximately half of the carbon in the overall life cycle for a dry mill ethanol plant is generated through the fermentation process and emitted to the atmosphere; this is the CO2 stream targeted for CCS. The remaining carbon is attributed to corn feedstock farming (diesel, fertilizer), energy for fuel processing (natural gas, electricity), and transportation (diesel) of the fuel product. Life cycle carbon estimates are also affected by the anticipated energy consumption of a potential capture facility, which depend on the type of CO2 product generated. For example, a 30%–40% net CO2 emission reduction is estimated if a liquefied CO2 facility were incorporated compared to a 40%–50% net CO2 reduction if a supercritical “injection-grade” CO2 product is generated; i.e., more energy is required to further refine the CO2 stream, affecting the full carbon life cycle estimates. A CCS FIP was developed and initiated at the RTE CCS site, resulting in the development of several guidance documents: a CO2 Capture Process Design Package, a North Dakota CO2 geologic Storage Permits Template, and a Public Outreach Package for CCS in North Dakota. General FIP components include CO2 capture system, pipeline and well designs; monitoring, verification, and accounting (MVA) plans; geologic characterization and testing programs; and permitting and outreach plans. Vendor bids were also acquired for the CO2 liquefaction facility. Near-surface characterization (groundwater and soil gas sampling) and geologic characterization (seismic survey) were initiated to inform development of a UIC Class VI-compliant MVA plan compliant with a North Dakota CO2 SFP. Designs (well and geologic testing) were completed for a stratigraphic test well compliant with a North Dakota CO2 SFP. In addition, the outreach plan was executed, including community open houses, meetings with city/county/state officials, and development of public materials. Although other entities continued to mature incentive programs in 2019–2020, California and the Internal Revenue Service (IRS) currently provide the most advanced economic opportunities for CCS integrated with fuel production. The California Low-Carbon Fuel Standard (LCFS) adopted a CCS Protocol in January 2019, allowing submittal of a design-based pathway (DBP) application for an approved temporary (not certified) carbon intensity value for a fully engineered facility. An ethanol–CCS DBP application to the California LCFS Program (officially approved February 28, 2020) was developed to show that the RTE CCS effort meets LCFS requirements. The approved DBP provides confidence to advance the project and supports potential investments. Other entities continue to mature incentive programs. The IRS issued guidance in February 2020 that addresses the definition of beginning of construction and revenue procedure on partnerships for the Enhancement of Carbon Dioxide Sequestration Credit (a.k.a. Section 45Q) CCS tax credit program; the IRS anticipates issuing further guidance on issues such as secure geologic storage, utilization qualifications, and recapture of claimed credits. Maturing incentive programs coupled with workable permitting regulations provide confidence to advance CCS projects in North Dakota and support financial investment to proceed with designing, constructing, and implementing CCS projects at small-scale fuel production facilities. The largest hurdles for CCS implementation at small-scale industrial systems are often business/economic-related (i.e., not technical). Market uncertainty already exists for agriculture-based alternative fuels such as corn ethanol, for which production has increased by ~33%, and prices have correspondingly lowered since 2015. Passing the Section 45Q tax credit program improves economic feasibility for CCS but may require external investors for a small business to achieve maximum benefits. Public–private partnerships with NDIC and DOE have resulted in foundational technical and regulatory knowledge, growing stakeholder confidence, and a pathway to implementation that enables similar industrial CCS projects in the region to advance. This subtask was funded through the EERC–DOE Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by NDIC and RTE. The authors would also like to thank CMG, ESRI, IHS, Neuralog, and Schlumberger for allowing the use of their software packages in support of this work.

42 ENGINEERING↗

DOE OSTI2020

Opportunities for Clean Energy in Natural Gas Well Operations: Preprint

The oil and gas industry is increasingly seeking operational improvements to reduce both costs and emissions. Currently, oil and gas directly and indirectly contributes forty-two percent of global greenhouse gas emissions, with over twenty percent of the industry’s emissions coming from operations. Given the opportunity for emissions reductions, this study describes techno-economic analysis evaluating opportunities for distributed energy generation and storage technologies – including solar photovoltaics (PV), distributed wind energy, and battery energy storage – to support companies’ energy cost savings targets, clean energy goals, and energy resiliency needs at hypothetical upstream well sites in the Marcellus Shale in Pennsylvania, both grid-connected and off-grid. These technologies reduce the site’s consumption of grid electricity and natural gas and thus help reduce Scope 1 and 2 emissions associated with electricity and natural gas. For each scenario, a cost of avoided emissions was calculated; these values can be compared to internal organizational value placed on emissions reductions, compared to other emissions reduction strategies such as energy efficiency, reducing flaring, and direct carbon capture and sequestration, and compared to existing (albeit limited) U.S. carbon markets such as California’s Low Carbon Fuel Standard. The study also explores the ability of these electric clean energy technologies to support site resiliency against utility outages.

42 ENGINEERING↗

DOE OSTI2020

Opportunities for Clean Energy in Natural Gas Well Operations

The oil and gas industry is increasingly seeking operational improvements to reduce both costs and emissions while improving resilience against electric grid outages. This study describes techno-economic analysis of opportunities for distributed energy generation and storage technologies to support companies' energy cost savings, clean energy, and energy resiliency goals. Specifically, the analysis evaluates solar photovoltaics (PV), distributed wind energy, and battery energy storage at hypothetical upstream well sites in the Marcellus Shale in Pennsylvania, both grid-connected and off-grid. Results indicate opportunity for solar PV to reduce operational costs. Additionally, these technologies reduce the site's consumption of grid electricity and natural gas and thus can help reduce Scope 1 and 2 emissions associated with electricity and natural gas consumption. For each emissions reduction scenario, a cost of avoided emissions was calculated; these values can be compared to internal organizational value placed on emissions reductions, compared to other emissions reduction strategies such as energy efficiency, reducing flaring, and direct carbon capture and sequestration, and compared to existing (albeit limited) U.S. carbon markets such as California's Low Carbon Fuel Standard. Results indicate that the associated costs of emissions reductions via distributed renewables are competitive with these options and markets. The study also explores the ability of these electric clean energy technologies to support site resiliency against utility outages.

42 ENGINEERING↗

DOE OSTI2020

Heteroatom-doped porous carbons for clean energy applications and methods for their synthesis

Methods for a facile, template free and one-step synthesis of nanoporous carbons by using a heterocyclic aromatic organic compound as a single source precursor of both carbon and nitrogen are described. The heterocyclic aromatic organic compound contains nitrogen in pyrrolic and/or pyridinic positions and is chemically activated with NaOH, KOH or ZnCl2 at high temperatures in a solid state mixture as a synthesis protocol to promote fine micropores during carbonization. Nanoporous carbons synthesized by these methods that have superior gas sorption/storage and energy storage properties are also described. The nanoporous carbons are useful as carbon sequestration agents and supercapacitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Responses of Boreal Forest Ecosystems and Permafrost to Climate Change and Disturbances: A Modeling Perspective

The north circumpolar region contains a large amount of carbon. This carbon storage is vulnerable due to permafrost degradation and wildfire disturbances under ongoing and projected climate change. Climate warming and wildfires change soil organic horizons gradually or abruptly, and modify permafrost thermal-hydrology and biogeochemistry, ecosystem structures, functions, and capability of sequestrating rising atmospheric CO2. Land models do not fully take accounts of these interactions and its complexity in the high latitude. This chapter describes a terrestrial ecosystem model with dynamic organic soil module (DOS-TEM) and its unique freezing-thawing algorithm, and presents key results of its applications mainly in boreal forests of Alaska. The DOS-TEM explicitly considers interactions of soil thermal and hydrological processes, permafrost degradation and the direct and indirect effects of wildfire disturbances, in addition to soil–plant C and N cycles. We first introduce four modules of DOS-TEM, focusing on its disturbance module and coupling with a dynamic organic soil module. Then we describe and validate DOS-TEM’s freezing-thawing algorithm and development based on two-directional Stefan algorithm (TDSA). Finally, we apply the DOS-TEM at site and region scales, with a focus on model ability to dynamically simulate soil organic thickness under warming and wildfires, and consequent impacts on permafrost in the Yukon River Basin. We conclude that land surface model development is urgently needed to include other critical landscape processes, such as thermalkarst and other disturbances, to synchronize thermal-hydrological-biogeochemical processes, and to incorporate an advanced understanding of biospheric feedbacks to atmosphere and ecosystems. Such a complexity of modeling scope is plausible with advancement of high performance computing.

Yi, Shuhua↗

DOE OSTI2020

Studies on the Encapsulation of Brine Generated from a Process Using Selective Electrodialysis Reversal

This topical report summarizes the laboratory testing, geochemical modeling, and mineralogical testing conducted to examine the efficacy of wastewater encapsulation for the brine generated from the Saltworks Flex electrodialysis reversal technology. Within the laboratory testing, the short- and long-term physical properties of seven separate mix designs were examined along with the leaching of each mix design. Additionally, geochemical thermodynamic modeling was used along with mineralogical analyses to help gain a fundamental understanding of the chemistry involved in the encapsulation process. Encapsulation is a process that results in the immobilization of constituents of interest by creating an engineered material that contains the waste within its matrix, both physically and chemically, in such a manner that the receiving environment is protected from adverse effects. Within the context of this study, encapsulation mix designs involved mixing the Saltworks brine with fly ash and various additives, principally lime (calcium oxide) and cement, to form a paste that eventually sets and hardens into a monolith upon placement in a landfill. Moisture conditioning fly ash with wastewater sources for on-site landfill disposal is a process that is in use at some sites and has been presented as a viable option to dispose of liquid wastes. However, because chemical reactions that can lead to sequestration of constituents of interest are not optimized, leaching can occur. Therefore, in this study, mixes were created to mimic moisture conditioning, as well as engineered pastes of varying mix designs. The study found that engineered encapsulation mixes provide significant resistance to leaching compared to moisture conditioning alone. The best performing encapsulation mix used lime as the additive, which proved superior to the use of cement. After 90 days of curing, this encapsulated mix was 5.5 times stronger than the moisture conditioned mix. Additionally, this mix exhibited an approximate 2.5 order of magnitude drop in hydraulic conductivity compared to the moisture conditioned mix. When comparing leaching, nearly all the chloride was found to evolve from the moisture conditioned mix, whereas only 6.7% of the chlorine contained in the best performing encapsulated mix leached out. Mineralogical analysis via X-ray diffraction (XRD) showed a significant concentration of the chloride sequestering mineral, Friedel’s salt, in the best performing encapsulation mix, whereas none was observed in the moisture conditioned mix, pointing to it being the primary chemical mechanism for chloride retention, along with the physical impermeability of the material. With respect to the modeling study, the model was successful in predicting the presence of most mineral phases observed in the XRD analysis.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2020

Effect of Power Plant Capacity on the CAPEX, OPEX, and LCOC of the CO2 Capture Process in Pre-Combustion Applications - Abstract

Aspen Plus v8.8 was used to simulate the pre-combustion CO2 capture process from a typical fuel gas stream at different power plant capacities ranging from 54.3 to 543 MW. Polyethylene glycol polydimethyl siloxane (PEGPDMS-1) was used as a physical solvent to capture CO2 in a countercurrent packed-bed absorber containing a structured packing (Mellapak 250Y). The process pressure was 51.4 bar and the solvent temperature was varied from 10 to 40 oC. The internal diameter of the absorber ranged from 1.9 to 7 m and the packing height from 13.9 to 45.5 m. The physico-chemical properties were obtained and modeled using the Perturbed Chain-Statistical Associating Fluid Theory (PC-SAFT) Equation-of-State (EOS). Four process constraints were imposed in Aspen Plus: (1) no flooding in the absorber, (2) the absorber height to diameter ratio (H/D) is greater than or equal 6, (3) at least 90 mol% of the CO2 capture from the fuel gas stream, and (4) the CO2 stream destined to sequestration sites should contain less than 600 ppm water concentration and less than or equal 0.5 mol% of fuel gases (H2, CO, CH4). The plant lifetime was assumed to be 30 years with an annual discount rate of 10% and an annual maintenance cost of 4% of the total capital expenses. Seven power plants with different capacities were used and for each plant, the corresponding CO2 capture process was simulated. The absorber flooding was checked using the generalized pressure drop correlation (GPDC) by Leva [1] and the capital expenditure (CAPEX), operating expenditure (OPEX), and levelized costs per ton of CO2 captured (LCOC) were calculated [2-5]. Normalized by the largest power plant capacity (543 MW) used in the simulation, the results indicated that the capital and operating expenditures increased, however, the LCOC decreased with increasing plant capacity. This behavior was due to the increased annual tonnage of the CO2 captured with plant capacity as shown in Figure 1. The calculated CAPEX, OPEX, LCOC and the tonnage of CO2 captured for the 543 MW power plant were about 52 MM$, 22 MM$/year, 7.46 $/ton and 4 MM ton/year.

Ashkanani, Husain↗

DOE OSTI2021

Raman Microscopy Analysis of Wyoming CarbonSAFE Pilot Well Thin Sections for Mineralogy and Organic Matter Characterization

Scanning confocal Raman microspectroscopy (RMS) was used to analyze thin sections for inorganic mineral content and for evaluation of organic material (OM). Thin sections were selected from a stratigraphic test well core in the Powder River Basin, Wyoming under the Wyoming CarbonSAFE project. The well was analyzed with a variety of rock and fluid characterization techniques to determine the feasibility of a commercial-scale CO2 storage site. RMS complements other analyses, including traditional petrography, SEM, porosity and permeability, and XRD For this aspect of the study, RMS is especially important in the evaluation of OM in sealing lithologies. At prospective geologic CO2 storage sites, it is imperative to assess the unconventional oil and gas potential of seals to ensure that any future development would not compromise the integrity of the seals. Whole-slide mineralogical surveys were performed on thin sections from various shale and sandstone formations. Surveys were analyzed with Direct Classical Least Squares to identify and quantify minerals. The location and concentration of minerals was color-coded and overlaid on optical images for visualization of the distribution of minerals. Dense hyperspectral Raman mapping of OM was performed on five thin sections. Eleven spectral parameters diagnostic of organic type and thermal maturity were used to train a Partial Least Squares (PLS) calibration against a set of artificially matured samples spanning the pre- to mid-oil window. The PLS was applied to the study set and a post-mature set. Additionally, the PLS was applied to each point in hyperspectral maps for visualization of trends in maturity across sample sets and discrimination of organic matter types within a given map. In inorganic surveys on thin sections, a total of 14 unique inorganic minerals were identified in Raman spectra including quartz, dolomite, calcite, hematite and anhydrite. Shale thin sections tended to be dominated by organic material. OM was often observed mixed with inorganic minerals. Sand- and mudstones were dominated by inorganic minerals. The PLS extrapolated the post-mature set to reflectances >1.2%. The study set ranged from very immature to postmature in the median of map fit-peak parameters. However, point maturity maps indicate that matrix OM in all study samples is immature and that discreet organic particles selected for mapping, which may be inertinites, bias medians towards more-mature. The work demonstrates the capabilities of RMS to perform both whole-slide mineralogy and OM analysis with applications to formation evaluation in oil & gas, carbon sequestration and mining. Here, analysis of sealing formations in the well indicates high levels of immature organic matter that would not be a viable target for future oil production that could compromise the CO2 storage site. The work brings together diverse disciplines from geology and petrography to analytical chemistry, big data and microscopy.

Myers, Grant↗

DOE OSTI2021

Elucidation of Aromatic Catabolic Pathways in White-Rot Fungi

This project aims to investigate the hypothesis that white-rot fungi can simultaneously depolymerize lignin extracellularly and catabolize depolymerization products intracellularly as carbon and energy sources. Evaluating this hypothesis will provide deeper understanding of the role of white-rot fungi in facilitating carbon sequestration in Nature. Additionally, identifying the most promising fungal strains for lignin turnover and catabolism will catalyze future efforts in genetic tool development to enable metabolic engineering in white-rot fungi for lignin bioconversion to bioproducts. Lignin is the second most abundant plant-based biopolymer on Earth and represents up to 40% of the energy density of lignocellulosic biomass. Even though lignin is a massive natural carbon and energy reservoir, only a small group of basidiomycete fungi, namely white-rot fungi (WRF), have evolved the ability to efficiently depolymerize and mineralize lignin to CO2 and H2O. Considerable research efforts have been undertaken to understand how WRF depolymerize lignin but the biochemical reactions that convert lignin into CO2 have been largely neglected. In fact, it is unclear if WRF intracellularly catabolize lignin-derived aromatic compounds to utilize them as a carbon and energy source, or rather if lignin is depolymerized and mineralized extracellularly merely to facilitate access to cellulose and hemicellulose for use as a primary carbon source. To date, we have employed 13C-isotope labeling, systems biology approaches, and in vitro enzyme assays to definitively demonstrate that two WRF, Trametes versicolor and Gelatoporia (Ceriporiopsis) subvermispora, funnel carbon from lignin-derived aromatic compounds into central carbon metabolism via intracellular catabolic pathways [1]. Specifically, 13C-isotopic labeling approaches showed that these WRF utilize poplar-derived aromatic compounds (e.g. 4-hydroxybenzoic acid (4-HBA)) as a carbon source. In silico genome analysis led us to hypothesize a complete catabolic pathway for 4-HBA and identify multiple homologous sequences for enzymes with putative oxidative decarboxylase, hydroxylase, and ring-opening dioxygenase activities, which are among the main biochemical reactions acting on aromatic compounds. Spatial and differential proteomic and metabolomic analyses supported the proposed catabolic pathways and showed alternative catabolic steps in T. versicolor that were not present in G. subvermispora. Based on the in silico, proteomics, and transcriptomics results, we down-selected enzymes for further in vitro characterization, and we have assigned a function to six fungal enzymes (including oxidative decarboxylases, hydroxylases, and ring-opening dioxygenases). Interestingly, even though we selected homologous enzyme pairs from both WRF with similar -omics trends, in a few cases only one of the studied fungi showed activity for the proposed substrate. Based on all the observations from this study [1], we hypothesized that 4-HBA preferentially undergoes oxidative decarboxylation to hydroquinone and subsequent hydroxylation to 1,2,4-benzenetriol in G. subvermispora before ring cleavage, whereas 4-HBA would preferentially undergo hydroxylation to protocatechuate and further oxidative decarboxylation to 1,2,4-benzenetriol in T. versicolor. Examining additional decarboxylases and hydroxylases as well as enzymes from other protein families that can perform the same or similar oxidative reactions, such as cytochromes P450 with aromatic hydroxylation activity, will also be key for elucidating enzyme preferences for specific substrates. Overall, this work forms the foundation of a new research area based on lignin catabolism by WRF, which could be further exploited to convert the undervalued biopolymer lignin into value-added compounds.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Effect of Cultivation Conditions on the Bioconversion of 4-Hydroxybenzoic Acid in Two White-Rot Fungi

White-rot fungi (WRF) are the most efficient organisms for lignin degradation in nature. A recent study has also shown the ability of WRF in funneling lignin-derived aromatics, including 4-hydroxybenzoic acid (4HBA) and vanillic acid, to central metabolism. However, it is unknown how the cultivation conditions affect the conversion of lignin-derived aromatic compounds. To address this, we performed multi-omic analyses and tracked the conversion of 4HBA in different cultivation conditions in two white-rot fungi: Trametes versicolor and Ceriporiopsis subvermispora. Specifically, we evaluated the effect of static and agitation cultivation conditions in the absence and the presence of antioxidants on fungal performance. We found that the comparison between static and agitation has the higher number of differentially expressed genes or protein abundances at the transcriptomic and proteomic levels, respectively, compared to the presence or the absence of antioxidants. Gene mapping on the enzymatic steps of the proposed 4HBA conversion pathway revealed that agitation causes upregulation of several oxidase genes such as aldehyde dehydrogenases, aldehyde oxidases, and hydroxylases in both fungi. Time-course experiments including 4HBA and cellobiose as carbon sources showed that T. versicolor exhibited higher 4HBA conversion levels in agitation (~110% more conversion, compared to static cultivation conditions) and in the presence of antioxidants (~10% more conversion, compared to the treatments without antioxidants). Interestingly, these trends were not found in C. subvermispora, suggesting different carbon metabolism in both species. Our findings are fundamental to better understand carbon sequestration from lignin in WRF, which will be key for future applications in the lignin valorization field.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2022

Synthesis Methods for Nanoparticle Morphology Control in Energy Applications

Lightweight nano-composite materials, nano-coatings, nanocatalysts, nano-structured materials have demonstrated an ability to reduce emissions and maximize clean energy production. Nanoparticles play an important role in engineering and decarbonization for energy applications, and a wide range of nanoparticle synthesis methods have been developed to include those that enable control over particle morphology. The ability to control nanoparticle morphology allows the tailoring and improvement of material properties that will accelerate efforts towards lowering carbon emissions by developing advanced catalysts for carbon sequestration and will enhance energy efficient processes and technologies. Synthesis methods aimed towards shape control of nanoparticles have demonstrated an ability to form spheres, rods, flower-like shapes, cubes, plates, shells, and chiral geometries. Processing methods used to form these morphologies include microwave assisted synthesis, solvothermal, hydrothermal, and a wide range of capping agents. A discussion of a few of these methods is given along with results and applications.

36 MATERIALS SCIENCE↗

DOE OSTI2021

State of Stress Uncertainty Quantification and Geomechanical Risk Analysis for Subsurface Engineering

All subsurface stress measurement methods available for deep subsurface applications are indirect and involve a significant amount of uncertainty. Quantifying these uncertainties is critical for applications where the state of stress is a component of a risk analysis with significant safety, environmental, and economic considerations. A publicly available and open source tool called the State of Stress Analysis Tool (SOSAT) has been developed to aid in performing a Bayesian uncertainty quantification and geomechanical risk analysis using many types of commonly available data. A new feature of this tool is using data from the FutureGen 2.0 site. The new feature of the tool was uses information about the absence or presence of borehole breakouts to constrain the state of stress. This new feature allows the user to specify probability distributions for the relevant parameters such as the drilling mud pressure, temperature, and the formation strength properties. The tool computes the posterior joint probability distribution of the horizontal principal stresses. Using random samples from this posterior distribution the tool then computes the probability of activating a critically oriented fault at a range of pore pressures. This latter feature can be used to aid in the assessment of the risk of induced seismicity and leakage in geologic carbon sequestration and enhanced geothermal systems.

Burghardt, Jeffrey A.↗

DOE OSTI2022

Techno-Economic Evaluation of Strategies to Approach Net-Zero Carbon Sustainable Aviation Fuel via Woody Biomass Gasification and Fischer-Tropsch Synthesis

Reducing the carbon dioxide (CO2) emissions from the transportation industry is a key target for achieving global net-zero carbon goals. Wide-spread electrification, efficient engine design, and alternative fuel implementations have been introduced for light-duty vehicles and are projected to significantly reduce light-duty emissions in the near future. Conversely, the aviation sector contributes considerably towards transportation-based carbon emissions, but current projections do not show substantial reductions in carbon emissions over time. Challenges for the aviation sector include low compatibility with electrification, relative inflexibility to variations in fuel properties, and requirement of high energy density fuels. Thus, identifying pathways to decarbonize the aviation sector via liquid low- or net-zero carbon biofuels that are compatible with current aviation infrastructure is crucial. This work investigates the economic feasibility of approaching net-zero carbon sustainable aviation fuel (SAF) from woody biomass via gasification and Fischer-Tropsch synthesis. In doing so, this assessment identifies the economic opportunities and trade-offs of several carbon mitigation strategies coupled with renewable resource interventions required to approach net-zero carbon fuels via biomass. Renewable natural gas and green hydrogen utilization strategies are assessed to examine the impact of fuel yield improvements versus renewable resource cost. Additionally, both carbon capture and sequestration (CCS) and carbon capture and utilization (CCU) are considered in this analysis to help mitigate carbon loss to the atmosphere. Each scenario was assessed on cost, carbon efficiency, energy efficiency, and overall technology-readiness level (TRL). The results of this analysis show that renewable natural gas, green hydrogen, and CCS can be viewed as a low-cost, near-term carbon abatement strategies. However, in the long-term, deployment of more expensive and less technologically mature CCU technologies can make use of point sources of CO2 to boost overall fuel production.

aviation fuel↗

DOE OSTI2022

Synthetic apolipoproteins, and related compositions methods and systems for nanolipoprotein particles formation

Synthetic apolipoproteins based on native/naturally occurring homolog proteins can be prepared using solid-phase peptide synthesis approaches combined with native chemical ligation methods to create analogs of full length apolipoproteins. The chemical synthesis is expected to allow introduction of non-natural amino acids, e.g., α,α′-dialkyl amino acids, with a periodicity that encourages both helix formation and amphipathicity. Such apolipoprotein analogs are expected to encourage, in some embodiments, facile and more complete NLP formation, enabling consideration of full spectrum of nanoparticle-based biotechnology applications ranging from therapeutic sequestration and delivery to energy/biofuel production to biopolymer production.

Source record↗

DOE OSTI2022

Bio-Energy with Carbon Capture and Storage (BECCS): Achieving Net Zero and Beyond

This work evaluates the life cycle environmental performance of Bioenergy with Carbon Capture and Storage (BECCS) across different biomass types, processing technologies, and capture rates. Preliminary results suggest that carbon neutrality could be achieved if 35% biomass is co-fired with 90% carbon capture and sequestration.

Carlson, Derrick R.↗

DOE OSTI2023

Multi factor Assessment for Decarbonization via Technically Viable Carbon Storage

Final poster presenting research under EDX4CCS portfolio, Task 21, on multi-factor assessment for technically viable carbon storage. To date, carbon storage viability assessments have focused on the technically recoverable storage resources to estimate the volume of carbon storage in reservoirs targeted for geologic carbon sequestration. The Carbon Storage Technical Viability Approach (CS TVA) was developed to account for all factors determining the viability of carbon storage at a given site, including socioeconomic and environmental aspects in addition to the classic subsurface geologic assessment. Abstract accepted to the American Geophysical Union Fall Meeting 2023.

Mark-Moser, Mackenzie K.↗

DOE OSTI2020

The Use of Silver Chloride Injection in Remediation of Iodine-129 by In Situ Capture as Silver Iodide at the F-Area Seepage Basin - 20225

The Savannah River Site (SRS) produced tritium, plutonium, and special nuclear materials for national defense, medicine, and the space programs. As part of operations, the F-Area Seepage Basins operated until 1988 for the disposition of deionized acidic wastewater from the F Separations Facility. The wastewater contained dilute nitric acid and low concentrations of non-radioactive metals, and radionuclides, with the major isotopes being Cs-137, Sr-90, U-235, U-238, Pu-239, Tc-99, I-129, and tritium. The seepage basins were closed in 1988 and backfilled and capped by 1991. The groundwater emanating from beneath the closed and capped seepage basins is acidic and contains elevated levels of both chemical and radiological contaminants. Releases from the groundwater plumes sourced from the F-Area Seepage Basins have impacted the water quality of Fourmile Branch, which is a small tributary to the Savannah River, a regional water source. A large pump-and-treat system was constructed in 1997 and operated until 2003 in an attempt to capture the releases to Fourmile Branch. The system in F Area and a similar system in H Area were expensive (∼$1.3 M/month) to operate and produced large quantities of radioactive waste, with concentrations of I- 129 too high to be disposed of at the SRS. In 2004, SRS replaced pump-and-treat with a funnel and gate system that along with operation of a base injection system at the gates reduces the flux of contaminants to the wetlands adjacent to Fourmile Branch. The alkaline solution injected into the aquifer neutralizes the acidic plume and immobilizes many of the cationic constituents. However, base injection is not effective in managing the release of iodine-129, an anionic contaminant. To address iodine-129 SRS and the Savannah River National Laboratory developed an in situ technology that uses ultra-fine ground silver chloride (AgCl) as an injectable capture medium for the sequestration of iodine-129. The AgCl amendment has a very small particle size and is designed to be injected into the contaminated aquifer to capture iodine-129. Dissolved iodine-129 forms a stable and highly insoluble solid (silver iodide) upon contact with AgCl. Laboratory studies, a field scale pilot test (2009), and three deployments (2011, 2015 and 2019) of AgCl have been successfully performed at the F-Area Seepage Basins. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

Innovations in Sustainable Passive Wastewater Treatment - 20236

Sustainable water treatment systems, engineered to mimic natural processes and utilize natural materials, yield economic and environmental benefits through reductions in long term operational inputs, including: power, chemicals, and labor. Golder is an industry leader in the development and implementation of sustainable technologies at operating and closed mines. We continue to innovate these technologies and customize solutions to meet client needs by applying past experience and focused research. Sustainable (or passive) water treatment systems include ponds, wetlands, flow-through natural media beds, and limestone drains. These systems can blend in with a natural environment, are highly cost-effective for long-term water treatment, and can outcompete traditional active treatment technologies. Application of sustainable technologies relative to active technologies can be influenced by the influent water matrix, effluent limitations, flow rate of water requiring treatment, and available land area. In this presentation, four Golder-developed systems are reviewed as case studies, demonstrating our continued progressive approach to advancing sustainable water treatment technologies to meet industry needs. These case studies focus on design innovations and operational performance from data collected from the operational systems. Resources (power, chemicals, labor) required for the operation of each case study are compared with those that would be required for operation of their active treatment technology alternatives. - Case Study 1 presents an anaerobic biochemical reactor (BCR), a technology typically implemented for metals treatment and acid neutralization, for the treatment of sulfate to low concentrations (<250 mg/L). Active treatment via reverse osmosis (RO) membrane filtration is typically required for treatment of sulfate to similar concentrations, this innovation provides potential for sustainable treatment to replace the need for energy, chemical, labor, and waste (brine) intensive RO treatment for specific applications. Magnetite waste rock materials from the site were upcycled for use in this system to provide sequestration of the sulfide generated in the BCR. - Case Study 2 examines another novel application of the conventional BCR, modified for the removal of radionuclides and metals (uranium, radium, and selenium) at a closed uranium mine. - Case Study 3 presents implementation of sustainable treatment for mine drain water from a historic mine site, now a state park with around 100,000 visitors per year. The system includes a pond, wetland, and manganese removal bed surrounded by public trails designed to maintain the character of the park. The system treats for arsenic, iron, and manganese at relatively high flows (up to 1,200 gpm), with large seasonal fluctuations in flow and quality. - Case Study 4 is a unique project for which Golder is currently designing a sustainable treatment system, with no energy input, to treat nitrate in mine water post-closure at a site near the arctic circle. In this unprecedented application, climate, management of freshet, and space availability presented substantial technical challenges. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗