Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,019 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Synthesis and Characterization of Amorphous Lawsone Polymer Dots for Fluorescent Applications

In this work, a two-step hydrothermal/solvothermal process was developed to generate highly fluorescent lawsone polymer dots (LPDs) utilizing an inexpensive and abundant starting material, 2-hydroxy-1,4-napththoquinone (lawsone). This hydrothermal/solvothermal process produces LPDs that have excitation independent emission with well-defined electronic transitions. This two-step protocol provides a straightforward approach to remove unwanted small molecular fluorescence, which has plagued carbon dot systems, without the need for advanced chromatographic purification methods or steps. A series of spectroscopic, electrochemical, and theoretical experiments suggest that this process proceeds via a sequential dehydration and dehydrogenation pathway to cross-link the lawsone into a carbon dot structure. This polymerization process helps to stabilize and favor certain electronic transitions inherently present in the lawsone monomer. The generation of the LPDs results in a 2 order of magnitude increase in the emission intensity and a quantum yield of 37%. This behavior is likely the result of the cross-linked structure shielding these electronic states from deactivation caused by nonradiative processes such as vibrational coupling and excited state quenching from thermal deactivation and solvent collisions. This finding is consistent with a cross-linked enhanced emission (CEE) mechanism, as previously observed for other similar systems. The LPDs were then incorporated into a TiO2 photoanode and utilized as a photosensitizer in a dye-sensitized solar cell (DSSC) which showed an enhancement in photocurrent density over pure TiO2. We also prepared a derivative of the LPDs utilizing a diethylene triamine additive (nitrogen-doped lawsone polymer dots (N-LPDs)) using the same two-step protocol and demonstrated its potential as a fluorescence microscopy dye for imaging MDA-MB-231 cancer cells.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Strain engineering a persistent spin helix with infinite spin lifetime

Persistent spin textures (PSTs) in solid-state materials arise from a unidirectional spin-orbit field in momentum space and offer a route to deliver long carrier spin lifetimes sought for future quantum microelectronic devices. Nonetheless, few three-dimensional materials are known to host PSTs owing to crystal symmetry and chemical requirements. There are even fewer examples demonstrated experimentally. Here we report that high-quality persistent spin textures can be obtained in the polar point groups containing an odd number of mirror operations. We use representation theory analysis and electronic structure calculations to formulate general discovery principles to identify PSTs hidden in known complex ternary layered and perovskite structures with large electric polarizations. We then show some of these materials exhibit PSTs without requiring any special crystalline symmetries. This finding removes the limitation imposed by mirror-symmetry protected PSTs that has limited compound discovery. Our general design approach enables the pursuit of persistent spin helices in materials exhibiting the C 3 v crystal class adopted by many quantum materials exhibiting large Rashba coefficients.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Growth and properties of Hg-based quantum well structures and superlattices

An overview of the properties of HgTe-CdTe quantum well structures and superlattices (SL) is presented. These new quantum structures are candidates for use as new long wavelength infrared (LWIR) and very long wavelength infrared (VLWIR) detectors, as well as for other optoelectronic applications. Much has been learned within the past two years about the physics of such structures. The valence band offset has been determined to be approx. 350 meV, independent of temperature. The occurrence of electron and hole mobilities in excess of 10(exp 5)cm(exp 2)/V center dot s is now understood on the basis of SL band structure calculations. The in-plane and out-of-plane electron and hole effective masses have been measured and interpreted theoretically for HgTe-CdTe superlattices. Controlled substitutional doping of superlattices has recently been achieved at North Carolina State University (NCSU), and modulation-doped SLs have now been successfully grown and studied. Most recently, a dramatic lowering of the growth temperature of Hg-based quantum well structure and SLs (to approx. 100 C) has been achieved by means of photoassisted molecular beam epitaxy (MBE) at NCSU. A number of new devices have been fabricated from these doped multilayers.

Schetzina, J. F.↗
NASA NTRS2011

Volumetric 3D Display System with Static Screen

Current display technology has relied on flat, 2D screens that cannot truly convey the third dimension of visual information: depth. In contrast to conventional visualization that is primarily based on 2D flat screens, the volumetric 3D display possesses a true 3D display volume, and places physically each 3D voxel in displayed 3D images at the true 3D (x,y,z) spatial position. Each voxel, analogous to a pixel in a 2D image, emits light from that position to form a real 3D image in the eyes of the viewers. Such true volumetric 3D display technology provides both physiological (accommodation, convergence, binocular disparity, and motion parallax) and psychological (image size, linear perspective, shading, brightness, etc.) depth cues to human visual systems to help in the perception of 3D objects. In a volumetric 3D display, viewers can watch the displayed 3D images from a completely 360 view without using any special eyewear. The volumetric 3D display techniques may lead to a quantum leap in information display technology and can dramatically change the ways humans interact with computers, which can lead to significant improvements in the efficiency of learning and knowledge management processes. Within a block of glass, a large amount of tiny dots of voxels are created by using a recently available machining technique called laser subsurface engraving (LSE). The LSE is able to produce tiny physical crack points (as small as 0.05 mm in diameter) at any (x,y,z) location within the cube of transparent material. The crack dots, when illuminated by a light source, scatter the light around and form visible voxels within the 3D volume. The locations of these tiny voxels are strategically determined such that each can be illuminated by a light ray from a high-resolution digital mirror device (DMD) light engine. The distribution of these voxels occupies the full display volume within the static 3D glass screen. This design eliminates any moving screen seen in previous approaches, so there is no image jitter, and has an inherent parallel mechanism for 3D voxel addressing. High spatial resolution is possible with a full color display being easy to implement. The system is low-cost and low-maintenance.

Geng, Jason↗
DOE OSTI2025

Nanodiamonds in Advancing Biomedical Sciences

Nanodiamonds (NDs), tetrahedral carbon frameworks with size ranging from 1 to 100 nanometers, have gained growing attention in recent years due to their distinct optical, thermal, and mechanical properties compared to other carbon nanomaterials (e.g., graphene, carbon nanotubes, carbon dots). Combined with a high surface-to-volume ratio and tunable and chemically versatile surfaces, these support broad applications across catalysis, electronics, and life sciences. Moreover, the biocompatible characteristics of NDs enable their controllable interfacial interactions with biological systems, positioning them as excellent candidates for advancing cutting-edge biomedical sciences, particularly through the engineering of efficient material-biointerfaces that facilitate optimal interactions with biological systems. Among various forms of NDs, fluorescent nanodiamonds (FNDs) have emerged as some of the most impactful and rapidly advancing materials, demonstrating strong potential in ultrasensitive spin-enhanced bioimaging, high-precision biosensing, traceable drug delivery, and quantum-enabled biomedical technologies. This Perspective introduces the key principles underlying NDs and FNDs, including their structural properties, synthesis methods, and surface functionalization strategies. It also highlights emerging biomedical applications of NDs and FNDs, with particular emphasis on neurological disorders. Last, the article discusses current challenges in advancing NDs as a multifunctional platform for neural therapies with translational potential toward clinical trials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

X-ray linear dichroic tomography of crystallographic and topological defects

Abstract The functionality of materials is determined by their composition 1–4 and microstructure, that is, the distribution and orientation of crystalline grains, grain boundaries and the defects within them 5,6 . Until now, characterization techniques that map the distribution of grains, their orientation and the presence of defects have been limited to surface investigations, to spatial resolutions of a few hundred nanometres or to systems of thickness around 100 nm, thus requiring destructive sample preparation for measurements and preventing the study of system-representative volumes or the investigation of materials under operational conditions 7–15 . Here we present X-ray linear dichroic orientation tomography (XL-DOT), a quantitative, non-invasive technique that allows for an intragranular and intergranular characterization of extended polycrystalline and non-crystalline 16 materials in three dimensions. We present the detailed characterization of a polycrystalline sample of vanadium pentoxide (V 2 O 5 ), a key catalyst in the production of sulfuric acid 17 . We determine the nanoscale composition, microstructure and crystal orientation throughout the polycrystalline sample with 73 nm spatial resolution. We identify and characterize grains, as well as twist, tilt and twin grain boundaries. We further observe the creation and annihilation of topological defects promoted by the presence of volume crystallographic defects. The non-destructive and spectroscopic nature of our method opens the door to operando combined chemical and microstructural investigations 11,18 of functional materials, including energy, mechanical and quantum materials.

Science & Technology - Other Topics↗
DOE OSTI2021

Azimuthal magnetic field distribution in gas-puff Z -pinch implosions with and without external magnetic stabilization

An experimental study of the magnetic field distribution in gas-puff Z pinches with and without a preembedded axial magnetic field (B z0 ) is presented. Spatially resolved, time-gated spectroscopic measurements were made at the Weizmann Institute of Science on a 300 kA, 1.6 μs rise time pulsed-power driver. The radial distribution of the azimuthal magnetic field, B θ , during the implosion, with and without a preembedded axial magnetic field of B z0 = 0.26 T, was measured using Zeeman polarization spectroscopy. The spectroscopic measurements of B θ were consistent with the corresponding values of B θ inferred from current measurements made with a B-dot probe. One-dimensional magnetohydrodynamic simulations, performed with the code TRAC-II, showed agreement with the experimentally measured implosion trajectory, and qualitatively reproduced the experimentally measured radial B θ profiles during the implosion when B z0 = 0.26 T was applied. Simulation results of the radial profile of B θ without a preembedded axial magnetic field did not qualitatively match experimental results due to magneto-Rayleigh-Taylor (MRT) instabilities. Furthermore, our analysis emphasizes the importance of MRT instability mitigation when studying the magnetic field and current distributions in Z pinches. Discrepancies of the simulation results with experiment are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Uncertainty quantification in density estimation from background-oriented Schlieren measurements

In this paper, we present an uncertainty quantification methodology for density estimation from background-oriented Schlieren (BOS) measurements, in order to provide local, instantaneous, a posteriori uncertainty bounds on each density measurement in the field of view. Displacement uncertainty quantification algorithms from cross-correlation-based particle image velocimetry are used to estimate the uncertainty in the dot pattern displacements obtained from cross-correlation for BOSs and assess their feasibility. In order to propagate the displacement uncertainty through the density integration procedure, we also develop a novel methodology via the Poisson solver using sparse linear operators. Testing the method using synthetic images of a Gaussian density field showed agreement between the propagated density uncertainties and the true uncertainty. Subsequently, the methodology is experimentally demonstrated for supersonic flow over a wedge, showing that regions with sharp changes in density lead to an increase in density uncertainty throughout the field of view, even in regions without these sharp changes. Lastly, the uncertainty propagation is influenced by the density integration scheme, and for the Poisson solver the density uncertainty on average increases on moving away from the regions where the Dirichlet boundary conditions are specified.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Topological Circular Dichroism in Chiral Multifold Semimetals

Uncovering the physical contents of the nontrivial topology of quantum states is a critical problem in condensed matter physics. Here, we study the topological circular dichroism in chiral semimetals using linear response theory and first-principles calculations. We show that, when the low-energy spectrum respects emergent SO(3) rotational symmetry, topological circular dichroism is forbidden for Weyl fermions, and thus is unique to chiral multifold fermions. This is a result of the selection rule that is imposed by the emergent symmetry under the combination of particle-hole conjugation and spatial inversion. Using first-principles calculations, we predict that topological circular dichroism occurs in CoSi for photon energy below about 0.2 eV. In conclusion, our Letter demonstrates the existence of a response property of unconventional fermions that is fundamentally different from the response of Dirac and Weyl fermions, motivating further study to uncover other unique responses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Layer-dependent optically induced spin polarization in InSe

Optical control of spin in semiconductors has been pioneered using nanostructures of III-V and II-VI semi-conductors, but the emergence of two-dimensional van der Waals materials offers an alternative low-dimensional platform for spintronic phenomena. Indium selenide (InSe), a group-III monochalcogenide van der Waals material, has shown promise for optoelectronics due to its high electron mobility, tunable direct band gap, and quantum transport. In addition to these confirmed properties, there are predictions of spin-dependent optical selection rules, suggesting the potential for all-optical excitation and control of spin in a two-dimensional layered material. Despite these predictions, layer-dependent optical spin phenomena in InSe have yet to be explored. Here, we present measurements of layer-dependent optical spin dynamics in few-layer and bulk InSe. Polarized photoluminescence reveals layer-dependent optical orientation of spin, thereby demonstrating the optical selection rules in few-layer InSe. Spin dynamics are also studied in many-layer InSe using time-resolved Kerr rotation spectroscopy. By applying out-of-plane and in-plane static magnetic fields for polarized emission measurements and Kerr measurements, respectively, the g factor for InSe was extracted. Further investigations are done by calculating precession values using a k · p model, which is supported by ab initio density functional theory. Comparison of predicted precession rates with experimental measurements highlights the importance of excitonic effects in InSe for understanding spin dynamics. In conclusion, optical orientation of spin is an important prerequisite for optospintronic phenomena and devices, and these first demonstrations of layer-dependent optical excitation of spins in InSe lay the foundation for combining layer-dependent spin properties with advantageous electronic properties found in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Department of Transportation PHMSA Aerosol Spray Project: Phase-0

This report discusses the work conducted at Sandia National Laboratories during the preliminary phase (Phase-0) of the Department of Transportation (DOT) Pipeline and Hazardous Materials Safety Administration (PHMSA) project tasked to better understand what happens to a high-pressure liquid canister or vessel during a fire in which an accidental instantaneous release occurs. Phase 0 had two main objects: (1) to establish a methodology for the high temperature and pressure spray vessel release and (2) to characterize the spray droplet formation. For this test series, diagnostic equipment such as the Malvern Spraytec, high-speed photometric cameras, pencil gauges, and thermocouples were used. Additionally, the effect of surface tension on the particle size distribution was evaluated with 1-liter of distilled water and with the same including the addition of 0.5% soap/water mixture. Results from this effort indicated that the plume formed from the instantaneous release in all conditions primarily included two distinct particle size distributions including 217-312µm and 0.53µm on average. Soapy water formed a higher concentration of smaller mist (0.53µm) than distilled water, potentially due to decreased surface tension with the added surfactant. Though results showed good correlation to certain particle size distributions it is encouraged to conduct additional tests like this with a wider range of liquids with different properties, which could affect the overall particle size distribution when released.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗